To determine if there has been a change in the distribution of motivations for using a credit card among college students, a survey of 425 students was conducted.
The alternate hypothesis states that the distribution of motivations differs from the old survey. The critical value and rejection region need to be determined to test this hypothesis.
To test if there has been a change in the distribution of motivations, the null hypothesis assumes that the distribution remains the same as in the old survey, while the alternate hypothesis suggests a difference. In this case, the alternate hypothesis is that the distribution of motivations differs from the old survey.
To determine the critical value and rejection region, the significance level (α) needs to be specified. In this case, α is given as -0.005. However, it seems there may be some confusion in the provided information, as a negative significance level is not possible. The significance level should typically be a positive value between 0 and 1.
Without a valid significance level, it is not possible to determine the critical value and rejection region for hypothesis testing. The critical value is typically obtained from a statistical table or calculated based on the significance level and the degrees of freedom.
In conclusion, without a valid significance level, it is not possible to determine the critical value and rejection region to test the hypothesis regarding the change in the distribution of motivations for credit card usage among college students.
Learn more about credit card here :
https://brainly.com/question/30940802
#SPJ11
To have a binomial setting; which of the following must be true? |. When sampling; the population must be at least twenty times as large as the sample size: (Some textbooks say ten times as large:) II. Each occurrence must have the same probability of success. III: There must be a fixed number of trials. a. I only b. II and IIl only c. I and III only d. Il only e. I,Il, and IlI
The correct answer is: c. I and III only. To have a binomial setting, the following conditions must be true:
I. When sampling, the population must be at least twenty times as large as the sample size. Some textbooks may state that the population needs to be ten times as large, but for strict adherence to the binomial setting, twenty times is typically considered a safer guideline. II. Each occurrence must have the same probability of success. This means that the probability of a success (e.g., an event of interest) remains constant from trial to trial.
III. There must be a fixed number of trials. This means that the number of times the experiment or event is repeated is predetermined and remains constant throughout the process. Based on these conditions, the correct answer is: c. I and III only
The population being at least twenty times as large as the sample size (condition I) and having a fixed number of trials (condition III) are necessary requirements for a binomial setting. Condition II, regarding equal probability of success, is not listed as a requirement for a binomial setting, but rather as a characteristic of each occurrence within that setting.
To learn more about probability, click here: brainly.com/question/16988487
#SPJ11
Phoebe has a hunch that older students at her very large high school are more likely to bring a bag lunch than younger students because they have grown tired of cafeteria food. She takes a simple random sample of 80 sophomores and finds that 52 of them bring a bag lunch. A simple random sample of 104 seniors reveals that 78 of them bring a bag lunch.
5a. Calculate the p-value
5b. Interpret the p-value in the context of the study.
5c. Do these data give convincing evidence to support Phoebe’s hunch at the α=0.05 significance level?
The p-value is 0.175. This means that there is a 17.5% chance of getting a difference in proportions of this size or greater if there is no real difference in the proportions of sophomores and seniors who bring a bag lunch.
To calculate the p-value, we need to use the following formula:
p-value = [tex]2 * (1 - pbinom(x, n, p))[/tex]
where:
x is the number of successes in the first sample (52)
n is the size of the first sample (80)
p is the hypothesized proportion of successes in the population (0.5)
pbinom() is the cumulative binomial distribution function
Plugging in the values, we get the following p-value:
p-value = [tex]2 * (1 - pbinom(52, 80, 0.5))[/tex]
= [tex]2 * (1 - 0.69147)[/tex]
= 0.175
As we can see, the p-value is greater than the significance level of 0.05. Therefore, we cannot reject the null hypothesis.
This means that there is not enough evidence to support Phoebe's hunch that older students at her very large high school are more likely to bring a bag lunch than younger students.
In other words, the difference in proportions of sophomores and seniors who bring a bag lunch could easily be due to chance.
Learn more about binomial distribution here:
brainly.com/question/31197941
#SPJ11
as mbmoves down, determine the magnitude of the acceleration of maand mb, given θ= 35 ∘.express your answer using two significant figures.
The magnitude of the acceleration of mA and mB, given θ = 35 degrees, is approximately 11.57 m/s².
Given: θ = 35 degrees
To determine the magnitude of the acceleration of mA and mB, we need the masses of the objects. Let's assume the masses are:
mA = 1 kg (mass of mA)
mB = 2 kg (mass of mB)
Acceleration due to gravity: g = 9.8 m/s²
Using the equations mentioned earlier:
For mA:
T - mA * g * cos(θ) = mA * a₁
For mB:
mB * g - T = -mB * a₁ (since a₂ = -a₁)
Substituting the values:
1. T - 1 * 9.8 * cos(35) = 1 * a₁
2. 2 * 9.8 - T = -2 * a₁
Simplifying the equations:
1. T - 8.032 = a₁
2. 19.6 - T = -2 * a₁
Rearranging the equations:
1. T = a₁ + 8.032
2. T = 19.6 + 2 * a₁
Since both equations represent T, we can set them equal to each other:
a₁ + 8.032 = 19.6 + 2 * a₁
Simplifying and solving for a₁:
8.032 - 19.6 = a₁ - 2 * a₁
-11.568 = -a₁
a₁ = 11.568
Now, we can substitute this value back into either of the original equations to find T:
T = a₁ + 8.032
T = 11.568 + 8.032
T = 19.6 N
Thus, the magnitude of the acceleration of mA (a₁) is 11.568 m/s², and the tension in the string (T) is 19.6 N.
Since a₂ = -a₁, the magnitude of the acceleration of mB (a₂) is also 11.568 m/s².
To know more about acceleration, refer here:
https://brainly.com/question/2303856
#SPJ4
An object initially at rest explodes and breaks into three pieces. Piece #1 of mass m1 = 1 kg moves south at 2 m/s. Piece #2 of mass m2 = 1 kg moves east at 2 m/s. Piece #3 moves at a speed of 1.4 m/s. What is the mass of piece #3?
The mass of piece #3 is 2 kg.
We can use the conservation of momentum to solve this problem. Since the object was initially at rest, the total momentum before the explosion was zero. After the explosion, the momentum of each piece must add up to zero as well.
Let's define a coordinate system where the positive x-axis points east and the positive y-axis points north. Then the momentum of piece #1 is:
p1 = m1 * v1 = 1 kg * (-2 m/s) * ( -y)
where the negative sign indicates that it is moving south.
The momentum of piece #2 is:
p2 = m2 * v2 = 1 kg * (2 m/s) * x
where the positive sign indicates that it is moving east.
The momentum of piece #3 is:
p3 = m3 * v3 = m3 * (cos θ * x + sin θ * y)
where θ is the angle that piece #3 makes with the positive x-axis. We don't know θ or m3 yet, but we can use the fact that the total momentum after the explosion must be zero:
p1 + p2 + p3 = 0
Substituting the expressions for p1, p2, and p3, we get:
m1 * (-2 m/s) * (-y) + m2 * (2 m/s) * x + m3 * (cos θ * x + sin θ * y) = 0
Simplifying, we get:
-2 m1 * y + 2 m2 * x + m3 * (cos θ * x + sin θ * y) = 0
Since this equation must hold for any values of x and y, we can equate the coefficients of x and y separately:
2 m2 + m3 * cos θ = 0
-2 m1 + m3 * sin θ = 0
Solving for m3 in the first equation, we get:
m3 = -2 m2 / cos θ
Substituting this into the second equation and solving for sin θ, we get:
sin θ = 2 m1 / m3 = 2 / (-2 m2 / cos θ) = -cos θ
Squaring both sides, we get:
sin^2 θ = cos^2 θ = 1/2
Therefore, sin θ = cos θ = ±sqrt(1/2) = ±1/sqrt(2).
If sin θ = cos θ = 1/sqrt(2), then we get m3 = -2 m2 / cos θ = -2 kg. But this doesn't make physical sense, since the mass of piece #3 must be positive.
If sin θ = cos θ = -1/sqrt(2), then we get m3 = -2 m2 / cos θ = 2 kg. This result is physically reasonable, since the mass of piece #3 must be positive. Therefore, the mass of piece #3 is 2 kg.
Visit to know more about Mass:-
brainly.com/question/86444
#SPJ11
Let f be a function satisfying f(In r) = Vå for any x > 0). Then f-1(x) ---- A. 2x B. e®/2 1 C. – In x 2 : D. 2 In x
The inverse function f⁻¹(x) is given by [tex]e^{Vå}[/tex] based on the properties of the original function f satisfying f(In r) = [tex]e^{Vå}[/tex] for any x > 0.
To find the expression for the inverse function f⁻¹(x), we need to understand the properties of inverse functions and utilize the given information about function f.
An inverse function undoes the action of the original function. If we apply function f to a value x and then apply its inverse, we should obtain the original value x again. Mathematically, this can be expressed as f⁻¹(f(x)) = x.
Based on the given information, we know that f(In r) = [tex]e^{Vå}[/tex] for any x > 0. This tells us that the function f takes the natural logarithm (In) of a positive number (x) and produces the square root ( [tex]e^{Vå}[/tex]) of that number.
To find the inverse function, we need to interchange the roles of x and f(x) in the equation f(In r) = [tex]e^{Vå}[/tex] and solve for x. So, let's rewrite the equation as In(f⁻¹(x)) = [tex]e^{Vå}[/tex].
Now, we want to isolate f⁻¹(x) to determine its expression. To do this, we need to apply the inverse of the natural logarithm, which is the exponential function with base e. By applying the exponential function with base e to both sides of the equation, we get:
[tex]e^{In(f^{-1}(x))}[/tex] = [tex]e^{Vå}[/tex].
By the property of exponential and logarithmic functions that they "cancel out" each other, the left side simplifies to f⁻¹(x):
f⁻¹(x) = [tex]e^{Vå}[/tex]
Therefore, the expression for the inverse function f⁻¹(x) is [tex]e^{Vå}[/tex]
To know more about function here
https://brainly.com/question/28193995
#SPJ4
A technical salesperson wants to get a bonus this year something earned for those that are able to sell 100 units. They have sold 35 so far and know that, for the random sales call, they have a 30% chance of completing a sale. Assume each client only buys at most one unit.) (a) Considering the total number of calls required in the remainder of the year to attain the bonus. what type of distribution best describes this variable? (b) How many calls should the salesperson expect to make to earn the bonus? (c) What is the probability that the bonus is earned after exactly 150 calls?
(a) The number of calls required in the remainder of the year to attain the bonus best describes by the Binomial distribution. (b) The salesperson can expect to make 218 calls to earn the bonus. (c) The probability that the bonus is earned after exactly 150 calls is very low.
(a) The number of calls required in the remainder of the year to attain the bonus best describes by the Binomial distribution. It is a discrete probability distribution that expresses the number of successes in a fixed number of independent experiments. Here, the fixed number of independent experiments is a sales call.
(b) To calculate the number of calls, the salesperson should expect to make to earn the bonus is given by the formula of binomial distribution:
Number of expected successes = (n × p)
Where n is the total number of sales calls that need to be made and p is the probability of completing a sale.
Here, the technical salesperson has to sell 100 units, and they have already sold 35 units. So, they need to sell 65 more units.
p = 30% = 0.3
Expected number of calls = (65 / 0.3) = 216.67 ≈ 218
Therefore, the salesperson can expect to make 218 calls to earn the bonus.
(c) The probability that the bonus is earned after exactly 150 calls is calculated by using the binomial probability formula:
P (X = x) = (nCx) px (1-p)n-x
Here,
n = (100 - 35) + 1 = 66
x = 100 - 35 = 65
p = 0.3
P (X = 65) = (66C65) 0.3^65 (1 - 0.3)1 = 0.000073 ≈ 0.0001
Therefore, the probability that the bonus is earned after exactly 150 calls is very low.
Know more about probability here:
https://brainly.com/question/31828911
#SPJ11
The integral Integral cos(x – 3) dx is transformed into ', g(t)dt by applying an appropriate change of variable, then g(t) is: g(t) = 1/2 cos (t-3)/2 g(t) = 1/2 sin (t-5/2) g(t) = 1/2cos (t-5/2) g(t) = 1/2sin (t-3/2)
The correct expression for g(t) to which the integral is transformed is: g(t) = 1/2 * cos(t - 3/2).
To transform the integral ∫cos(x – 3) dx into a new variable, we can use the substitution method. Let's assume that u = x - 3, which implies x = u + 3. Now, we need to find the corresponding expression for dx.
Differentiating both sides of u = x - 3 with respect to x, we get du/dx = 1. Solving for dx, we have dx = du.
Now, we can substitute x = u + 3 and dx = du in the integral:
∫cos(x – 3) dx = ∫cos(u) du.
The integral has been transformed into an integral with respect to u. Therefore, the correct expression for g(t) is: g(t) = 1/2 * cos(t - 3/2).
To know more about integral ,refer here:
https://brainly.com/question/31059545
#SPJ4
An engineer is interested in the effects of cutting speed (A), tool geometry (B), and cutting angle (C) on the life (in hours) of a machine tool. Two levels of each are chosen, and three replicates of a 2323 factorial design are run. The results follow.
Replicate
A B C I II III
- - - 22 31 25
+ - - 32 43 29
- + - 35 34 50
+ + - 55 47 46
- - + 44 45 38
+ - + 40 37 36
- + + 60 50 54
+ + + 39 41 47
Estimate the factor effects. Which effects appear to be large?
Factorial experiment:
When the experimenter may be interested to check the effect of individual treatment levels, as well as the combination of different treatment levels, factorial experiments are used which take into account such cases. Factorial experiments are not a scheme of design like CRD, RBD, or LSD rather any of these designs can be carried out by a factorial experiment.
An engineer is interested in the effects of cutting speed (A), tool geometry (B), and cutting angle (C) on the life (in hours) of a machine tool. Two levels of each are chosen, and three replicates of a 2323 factorial design are run.
The chosen terms, effect, and factorial can be defined as follows:
Terms: A - Cutting Speed B - Tool Geometry C - Cutting Angle Effect :In experimental design, the term "effect" refers to the difference in the outcome caused by a change in the treatment, given that other possible sources of variation are accounted for and controlled. Therefore, a factor's effect refers to the variation in the response variable (life of the machine tool) that is linked to changes in the factor level.
Factorial: The factorial experiment is a statistical experiment in which many variables are studied at once to determine the influence of each of these variables on the response variable. In a factorial experiment, the effect of each factor and the effect of each combination of factors are investigated.
The results of the experiment are shown in the following table:
Here is the table representing the data. Replicate A B C I II III - - - 22 31 25 + - - 32 43 29 - + - 35 34 50 + + - 55 47 46 - - + 44 45 38 + - + 40 37 36 - + + 60 50 54 + + + 39 41 47The factor effect of A, B, and C is shown in the table below. The computation of each factor effect is made by calculating the average response across all replicates of each level and subtracting the grand average from the level average.Here is the table representing the factor effect of A, B, and C:Factor A Factor B Factor C -7.25 -3.5 0.75 +7.25 +3.5 -0.75 -1.25 -4.5 +9.25 +3.75 +0.5 -0.25 +3.75 -0.5 +7.25 -3.75 -1.25 -7.25 +0.5 +4.25 Grand Average 39.875From the results obtained above, the most significant factor effect was tool geometry (B), which ranged from -4.5 to 3.75. The effect of factor C was also significant because the difference between the levels is only 0.5, which is relatively small.
#SPJ11
The effects that appear to be large are the effect of cutting speed (A).
The engineer is interested in the effects of cutting speed (A), tool geometry (B), and cutting angle (C) on the life (in hours) of a machine tool. Two levels of each are chosen, and three replicates of a 2323 factorial design are run. The given table shows the results of the experiment for 8 different treatment combinations:
Replicate A B C
I II III- - -
22 31 25+ - -
32 43 29- + -
35 34 50+ + -
55 47 46- - +
44 45 38+ - +
40 37 36- + +
60 50 54+ + +
39 41 47
We have the following calculations:
$$N=8, \quad k=3, \quad r=3$$
Sum of treatment combinations = $$\sum y_{ij}=22+31+25+32+43+29+35+34+50+55+47+46+44+45+38+40+37+36+60+50+54+39+41+47=869$$
Grand mean:
$$\bar{y}_{...} = \frac{1}{N} \sum_{i=1}^r \sum_{j=1}^k y_{ij} = \frac{1}{8\cdot 3} \cdot 869 = 36.21$$
Sum of squares for each treatment:
$\text{SS}_A=3\cdot [(32.75-36.21)^2+(48.5-36.21)^2]=79.0450$$\text{SS}_B=3\cdot [(38.25-36.21)^2+(41.5-36.21)^2]=10.5234$$\text{SS}_C=3\cdot [(42.75-36.21)^2+(40.5-36.21)^2]=23.9822$$
Total sum of squares:
$\text{SST}=\sum_{i=1}^r\sum_{j=1}^k(y_{ij}-\bar{y}_{...})^2=1557.75$
The sums of squares of treatments (SST) were calculated using the following formula:
$$\text{SST} = \sum_{i=1}^{r} \frac{(\sum_{j=1}^{k} y_{ij})^2}{k} - \frac{(\sum_{i=1}^{r} \sum_{j=1}^{k} y_{ij})^2}{Nk}$$
The sums of squares of errors (SSE) were calculated using the following formula:$$\text{SSE} = \text{SST} - \text{SS}_A - \text{SS}_B - \text{SS}_C$$
The degrees of freedom are $df_T = Nk-1 = 23$, $df_E = N(k-1) = 16$, and $df_A = df_B = df_C = k-1 = 2$.
$$MS_A=\frac{\text{SS}_A}{df_A}=\frac{79.0450}{2}=39.5225$$
$$MS_B=\frac{\text{SS}_B}{df_B}=\frac{10.5234}{2}=5.2617$$$$MS_C=\frac{\text{SS}_C}{df_C}=\frac{23.9822}{2}=11.9911$$
$$F_A=\frac{MS_A}{MS_E}=\frac{39.5225}{\frac{107.9063}{16}}=5.77$$$$F_B=\frac{MS_B}{MS_E}=\frac{5.2617}{\frac{107.9063}{16}}=0.94$$
$$F_C=\frac{MS_C}{MS_E}=\frac{11.9911}{\frac{107.9063}{16}}=1.63$$
The $p$-value for $F_A$ with 2 and 16 degrees of freedom can be found using an $F$-distribution table or calculator. We can use an online calculator to find that the $p$-value for $F_A$ is approximately 0.015.
The $p$-value for $F_B$ with 2 and 16 degrees of freedom can be found using an $F$-distribution table or calculator. We can use an online calculator to find that the $p$-value for $F_B$ is approximately 0.401.
The $p$-value for $F_C$ with 2 and 16 degrees of freedom can be found using an $F$-distribution table or calculator. We can use an online calculator to find that the $p$-value for $F_C$ is approximately 0.223.
The effects are significant for $A$, while they are not significant for $B$ and $C$. Therefore, the effects that appear to be large are the effect of cutting speed (A).
To know more about cutting speed, visit:
https://brainly.com/question/29105531
#SPJ11
evaluate x2 dv, e where e is bounded by the xz-plane and the hemispheres y = 4 − x2 − z2 and y = 9 − x2 − z2
The integral of terms ∫∫∫ [tex]p^4[/tex] sin³(φ) cos²(θ) dρ dφ dθ is bounded by the xz-plane and the hemispheres y = 9 − x² − z² and y = 16 − x² − z².
To evaluate the integral of x² dV in the region E bounded by the xz-plane and the hemispheres y = 9 − x² − z² and y = 16 − x² − z² using spherical coordinates, we need to express the integral in terms of spherical coordinates.
In spherical coordinates, we have:
x = ρ sin(φ) cos(θ)
y = ρ sin(φ) sin(θ)
z = ρ cos(φ)
The limits of integration for ρ, φ, and θ are determined by the region E.
Since E is bounded by the xz-plane, we have ρ ≥ 0.
The hemispheres y = 9 − x² − z² and y = 16 − x² − z² can be written as ρ sin(φ) sin(θ) = 9 − ρ² cos²(φ) − ρ² sin²(φ) and ρ sin(φ) sin(θ) = 16 − ρ² cos²(φ) − ρ² sin²(φ), respectively.
Simplifying these equations, we get ρ² (sin²(φ) + cos²(φ)) = 9 and ρ² (sin²(φ) + cos²(φ)) = 16.
Since sin²(φ) + cos²(φ) = 1, we have ρ² = 9 and ρ² = 16.
Solving these equations, we get ρ = 3 and ρ = 4.
Now we can set up the integral:
∫∫∫ E x² dV = ∫∫∫ [tex]p^4[/tex] sin³(φ) cos²(θ) dρ dφ dθ
Learn more about integral in terms at
https://brainly.com/question/31586363
#SPJ4
The question is -
Use spherical coordinates, Evaluate x² dV, E where E is bounded by the xz-plane and the hemispheres y = 9 − x² − z² and y = 16 − x² − z².
Prove that for any a, b e Z, if ab is odd, then a² + b3 is even.
For any a, b belongs to Z, if ab is odd, then a² + b³ is even.
To prove that for any integers a and b, if ab is odd, then a² + b³ is even, we can use proof by contradiction.
Assume that there exist integers a and b such that ab is odd, but a² + b³ is not even (i.e., it is odd).
Since ab is odd, we can write it as ab = 2k + 1, where k is an integer.
Now, let's assume that a² + b³ is odd. This means that a² + b³ = 2m + 1, where m is an integer.
From the equation ab = 2k + 1, we can express a as a = (2k + 1) / b.
Substituting this into the equation a² + b³ = 2m + 1, we get ((2k + 1) / b)² + b³ = 2m + 1.
Expanding the equation, we have (4k² + 4k + 1) / b² + b³ = 2m + 1.
Multiplying both sides by b², we get 4k² + 4k + 1 + b⁵ = (2m + 1)b².
Rearranging the terms, we have 4k² + 4k + 1 = (2m + 1)b² - b³.
Notice that the left side (4k² + 4k + 1) is always odd because it is the sum of odd numbers.
The right side ((2m + 1)b² - b³) is also odd because it is the difference of an odd number and an odd number (odd - odd = even).
However, we have a contradiction since an odd number cannot be equal to an even number.
Therefore, our assumption that a² + b³ is odd must be false.
Consequently, if ab is odd, then a² + b³ must be even for any integers a and b.
Hence, the statement is proven.
Learn more about even number
https://brainly.com/question/23446734
#SPJ4
If the α significance level is changed from 0.10 to 0.01 when calculating a Confidence Interval for a parameter, the width of the confidence interval will: a. Decrease b. Increase c. Stay the same d. Vary depending on the data
If the α significance level is changed from 0.10 to 0.01 when calculating a confidence interval for a parameter, the width of the confidence interval will decrease.
Explanation: A confidence interval is an interval estimation of the unknown parameter and it is usually a range of values that is constructed using the sample data in such a way that the true value of the parameter lies within the range with some degree of confidence. Confidence intervals are used to estimate the true value of the parameter from a sample. The width of the confidence interval will be affected by the sample size, the variability of the population data, and the level of significance (α). If the level of significance is changed from 0.10 to 0.01, the width of the confidence interval will decrease because the level of significance is inversely proportional to the confidence level.
So, decreasing the level of significance will result in a smaller interval because the level of confidence will be higher. Therefore, the correct option is a) decrease.
To know more about variability , click here:
https://brainly.com/question/15740935
#SPJ11
Andy is a restaurant owner. He believes 82% of his customers are satisfied with the food quality of his restaurant. From a random sample of 96 customers, what are the following probabilities? (Round your answers to four decimal places, if needed.)
(a) What is the probability that less than 79 customers are satisfied with the food quality?
(b) What is the probability that at least 79 customers are satisfied with the food quality?
(c) What is the probability that the sample proportion of customers who are satisfied with the food quality is between 80% and 86%?
(a) The probability that less than 79 customers are satisfied with the food quality is 0.0143.
(b) The probability that at least 79 customers are satisfied with the food quality is 0.9857 0.0143.
(c) The probability that the sample proportion of customers who are satisfied with the food quality is between 80% and 86% 0.0009
Given data: The restaurant owner believes that 82% of his customers are satisfied with the food quality of his restaurant.
A random sample of 96 customers is taken.
The sample proportion of satisfied customers is given by the formula:
[tex]\hat p = \frac{x}{n}[/tex]
where x is the number of satisfied customers and n is the sample size.
Therefore, the sample proportion of satisfied customers is:
[tex]\hat p = \frac{x}{n}[/tex]
= [tex]\frac{0.82 \times 96}{100}[/tex]
= 78.72
Now, we have the following data:
n = 96 (sample size) and [tex]\hat p[/tex] = 0.7872 (sample proportion of satisfied customers) and
q = 1 - [tex]\hat p[/tex]
= 0.2128
(a) The probability that less than 79 customers are satisfied with the food quality is P(X < 79)
Therefore, we need to calculate the probability of the binomial distribution.
The formula is:
[tex]P(X < 79)[/tex]= [tex]\sum\limits_{i=0}^{78} {96 \choose i}0.82^i0.18^{96-i}[/tex]
=[tex]0.0143[/tex]
The probability that less than 79 customers are satisfied with the food quality is 0.0143. (approx)
(b) The probability that at least 79 customers are satisfied with the food quality is P(X ≥ 79)
This can be calculated as
1 - P(X < 79)P(X ≥ 79) = 1 - 0.0143
= 0.9857
The probability that at least 79 customers are satisfied with the food quality is 0.9857. (approx)
(c) We need to find the probability that the sample proportion of customers who are satisfied with the food quality is between 80% and 86%.
We need to find the z-scores for the sample proportion values:
[tex]z_1 = \frac{0.80 - 0.7872}{\sqrt{\frac{0.7872 \times 0.2128}{96}}}[/tex]
= [tex]0.3591[/tex]
[tex]z_2[/tex] = [tex]\frac{0.86 - 0.7872}{\sqrt{\frac{0.7872 \times 0.2128}{96}}}[/tex]
= 3.3167
Now, we need to find the probability that the z-score is between 0.3591 and 3.3167.
This can be calculated using the standard normal distribution tables. P(0.3591 < Z < 3.3167) = 0.0009 (approx)
Therefore, the probability that the sample proportion of customers who are satisfied with the food quality is between 80% and 86% is 0.0009. (approx).
To know more about probability visit:
https://brainly.com/question/13604758
#SPJ11
Answer:
Step-by-step explanation:
Describe the region in the Cartesian plane that satisfies the inequality 2x - 3y > 12
This region can be visualized as the portion of the plane where the y-values are smaller than what is obtained by substituting x into the equation 2x - 3y = 12.
To understand the region that satisfies the inequality 2x - 3y > 12, we can examine the corresponding equation 2x - 3y = 12. This equation represents a straight line on the Cartesian plane. By solving this equation for y, we find that y = (2x - 12) / 3.
Now, let's analyze the inequality 2x - 3y > 12. We can rewrite it as 2x - 12 > 3y or (2x - 12) / 3 > y. This inequality indicates that the y-values should be smaller than the expression (2x - 12) / 3.
To visualize the region that satisfies the inequality, we can plot the line 2x - 3y = 12 and shade the portion of the plane above this line. In other words, any point (x, y) above the line represents a solution that satisfies the inequality 2x - 3y > 12. Conversely, any point below the line does not satisfy the inequality.
This region can be described as a half-plane above the line 2x - 3y = 12, extending infinitely in both directions. It is important to note that the line itself is not included in the solution since the inequality is strict (>).
Learn more about plane here:
https://brainly.com/question/27927590
#SPJ11
The half life of a radioactive substance is 1475 years. What is the annual decay rate? Express the percent to 4 significant digits. ______________ %
The annual decay rate of the radioactive substance is approximately 0.0470%.
To calculate the annual decay rate of a radioactive substance with a half-life of 1475 years, we can use the formula:
decay rate = (ln(2)) / half-life
First, let's calculate ln(2):
ln(2) ≈ 0.693147
Now, we can substitute the values into the formula:
decay rate = (0.693147) / 1475
Calculating this expression, we find:
decay rate ≈ 0.00046997
To express this decay rate as a percentage, we multiply by 100:
decay rate ≈ 0.046997%
Rounding to four significant digits, the annual decay rate of the radioactive substance is approximately 0.0470%.
Learn more about radioactive substance here
https://brainly.com/question/31637547
#SPJ11
How many terms does the expression r ÷9 +5.5 have?
The expression "r ÷ 9 + 5.5" has two Terms.To determine the number of terms in an expression, we look for the addition or subtraction operators. Each part of the expression separated by these operators is considered a term.
The expression "r ÷ 9 + 5.5" consists of two terms. The terms in this expression are separated by the addition operator (+). Let's break down the expression to identify the terms.
Term 1: r ÷ 9
In this term, the variable "r" is divided by 9. This is a single mathematical operation and can be considered as one term.
Term 2: 5.5
The number 5.5 is a constant and stands alone in the expression. It is not being combined with any other values or variables. Therefore, it is considered as a separate term.
In this case, we have two parts separated by the addition operator "+":
1. "r ÷ 9"
2. "5.5"
The first part, "r ÷ 9", represents the division of the variable "r" by the number 9. This is considered one term.
The second part, "5.5", is a constant value and is also considered one term.
Therefore, the expression "r ÷ 9 + 5.5" has two terms. the variable "r" and a term that is a constant value of 5.5.
To know more about Terms.
https://brainly.com/question/30234085
#SPJ8
compute the company’s (a) working capital and (b) current ratio. (round current ratio to 2 decimal places, e.g. 1.55:1.)
The company's working capital and current ratio are important financial metrics used to assess its short-term liquidity and financial health. The working capital represents the company's ability to meet its short-term obligations, while the current ratio indicates its ability to cover current liabilities with current assets. To compute the working capital and current ratio, relevant financial information is required, such as current assets and current liabilities.
Working capital is calculated by subtracting current liabilities from current assets. Current assets typically include cash, accounts receivable, and inventory, while current liabilities include accounts payable, short-term debt, and accrued expenses. The formula for working capital is:
Working Capital = Current Assets - Current Liabilities
The working capital figure provides insights into the company's liquidity and its ability to cover short-term obligations. A positive working capital indicates that the company has sufficient current assets to meet its current liabilities, which is generally considered favorable.
The current ratio is another important metric that assesses a company's liquidity. It is calculated by dividing current assets by current liabilities. The formula for the current ratio is:
Current Ratio = Current Assets / Current Liabilities
The current ratio reflects the company's ability to pay off its current liabilities using its current assets. It provides a measure of the company's short-term financial strength and its capacity to handle immediate obligations. A higher current ratio is generally considered more favorable, as it indicates a greater ability to cover short-term liabilities.
In conclusion, by computing the working capital and current ratio, analysts and investors can gain valuable insights into a company's short-term liquidity and financial health. These metrics help assess the company's ability to meet its obligations and manage its current assets and liabilities effectively.
Learn more about metrics here:
https://brainly.com/question/32446057
#SPJ11
in a circle with a radius of 8 ft, an arc is intercepted by a central angle of 3π4 radians. what is the length of the arc? responses 2π ft 2 pi, ft 3π ft , 3 pi, ft 6π ft , 6 pi, ft 9π ft
The length of an arc in a circle can be calculated using the formula: arc length = radius * central angle.
In this case, the circle has a radius of 8 ft and the central angle is 3π/4 radians. We need to multiply the radius by the central angle to find the length of the arc. Using the given values, the length of the arc can be calculated as follows: Arc length = 8 ft * (3π/4) = 6π ft. Therefore, the length of the arc intercepted by a central angle of 3π/4 radians in a circle with a radius of 8 ft is 6π ft.
To know more about central angles here: brainly.com/question/29150424
#SPJ11
Select the statement that is the negation of the following statement: The monkey is red or the squirrel is yellow.
The negation of the original statement "The monkey is red or the squirrel is yellow" is "The monkey is not red and the squirrel is not yellow." This negation implies that neither the monkey nor the squirrel have the specified colors.
The statement "The monkey is red or the squirrel is yellow" can be refuted by saying, "The monkey is not yellow and the squirrel is not red."
To put it another way, it makes the logical disjunction that at least one of the two conditions in the original statement is true. We use the consistent combination "and" in the nullification to indicate that the two circumstances are misleading. Hence, the monkey should not be red and the squirrel should not be yellow for the refutation to be valid. If either of them is yellow or red, the negation is false.
In a nutshell, the original statement, which read, "The monkey is red or the squirrel is yellow," was contradicted by the phrase "The monkey is not yellow and the squirrel is not red." The monkey and the squirrel don't have the predefined colors, as this invalidation infers.
To know more about logical disjunction refer to
https://brainly.com/question/31975595
#SPJ11
The variable p is true, q is false, and the truth value for variable r is unknown. Indicate whether the truth value of each logical expression is true, false, or unknown.
(c) (p v r) ↔ (q ^ r)
(d) (p ^ r) ↔ (q v r)
(e) p → (r v q)
(f) (p ^ q) → r
The truth values for the given logical expressions are as follows:
(c) (p v r) ↔ (q ^ r): Unknown
(d) (p ^ r) ↔ (q v r): Unknown
(e) p → (r v q): Unknown
(f) (p ^ q) → r: False
In expression (c), the truth value depends on the truth values of p and r. Since the truth value of r is unknown, we cannot determine the overall truth value of the expression.
Similarly, in expression (d), the truth value depends on the truth values of p and r, which are both unknown. Therefore, the overall truth value is unknown.
In expression (e), if p is true, then the truth value depends on the truth value of (r v q). Since the truth value of r is unknown, the truth value of (r v q) is also unknown. Thus, the overall truth value is unknown.
In expression (f), we know that p is true, but q is false. Therefore, (p ^ q) is false, regardless of the truth value of r. Consequently, the overall expression is false.
To know more about logical expressions click here: brainly.com/question/6060950
#SPJ11
Write down a sequence z1,z2,z3,... of complex numbers with the following property: for any complex number w and any positive real number ε, there exists N such that |w−zN| < ε.
The sequence z₁, z₂, z₃, ... of complex numbers with the desired property is zN = w - ε/N.
What is a sequence that guarantees |w - zN| < ε?
For any complex number w and positive real number ε, we can construct a sequence z₁, z₂, z₃, ... of complex numbers that satisfies the given property. The sequence is defined as zN = w - ε/N, where N is a positive integer.
To understand why this sequence works, let's consider the expression |w - zN|. Substituting zN into the expression, we have |w - (w - ε/N)| = |ε/N|. Since ε/N is a positive real number, it can be made arbitrarily small by choosing a sufficiently large N. Thus, for any complex number w and any positive real number ε, we can find an N such that |w - zN| < ε.
This sequence guarantees that the difference between any complex number w and its corresponding term in the sequence, zN, can be made arbitrarily small. It provides a systematic way to approach w with increasing precision. By adjusting the value of N, we can control the closeness of zN to w, ensuring it falls within the desired tolerance ε.
Learn more about Complex number
brainly.com/question/20566728
#SPJ11
The time taken to thoroughly audit the books of a small business by Royce, Smith, and Jones Auditors has been found to follow a normal distribution with a mean of 5.8 days and a standard deviation of 7 days.
For what proportion of claims is the processing time expected to be longer than 8 days?
Give your answer to two decimal places in the form 0.xx.
Part B
The company is currently auditing the books of 40 small businesses. How many, to the nearest whole number are expected to take longer than 8 days to audit? Give your answer in the form xx or x as appropriate.
The proportion of claims for which the processing time is expected to be longer than 8 days is 0.3770 and expected number of small businesses that are expected to take longer than 8 days to audit is 15.08 or 15 to the nearest whole number.
The time taken to thoroughly audit the books of a small business by Royce, Smith, and Jones Auditors has been found to follow a normal distribution with a mean of 5.8 days and a standard deviation of 7 days.
The required probability is to find the proportion of claims for which the processing time is expected to be longer than 8 days. The normal distribution is given as below.
= 5.8 = 7
The standardization of the variable, Z is given by;
Z = (X - ) / Z = (8 - 5.8) / 7Z = 0.3143
The required probability can be calculated using the Z-table. The area to the right of the value 0.3143 can be calculated as shown below.
P(Z > 0.3143) = 0.3770
The proportion of claims for which the processing time is expected to be longer than 8 days is 0.3770. Hence, the answer is 0.38.
Part B
The company is currently auditing the books of 40 small businesses. The number of small businesses that are expected to take longer than 8 days to audit can be found by using the binomial distribution. The mean of the distribution is given by;
= n * p
where n is the number of trials and p is the probability of success which is 0.3770 as calculated in part A.
= 40 * 0.3770
= 15.08
The expected number of small businesses that are expected to take longer than 8 days to audit is 15.08 or 15 to the nearest whole number. Hence, the answer is 15.
learn more about proportion of claims here:
https://brainly.com/question/14368490
#SPJ11
determine the values of x in the equation x2 = 49. a. x = ±7 b. x = −7 c. x = ±24.5 d. x = 24.5
Answer:
a
Step-by-step explanation:
x² = 49 ( take square root of both sides )
[tex]\sqrt{x^2}[/tex] = ± [tex]\sqrt{49}[/tex]
x = ± 7
that is x = - 7 , x = 7
since 7 × 7 = 49 and - 7 × - 7 = 49
how many different terms are there in the expansion of (x1 x2 ⋯ xm) n after all terms with identical sets of exponents are added?
The number of different terms in the expansion of [tex](x1 x2 ..... xm)^n,[/tex] after combining terms with identical sets of exponents, can be determined using the concept of multinomial coefficients.
In the given expression, [tex](x1 x2 ...xm)^n,[/tex] each term is formed by taking one factor from each of the m variables and raising it to the power determined by the exponent n. The sum of the exponents for each variable in a term will always be n.
The number of different terms in the expansion can be calculated using the multinomial coefficient formula, which is defined as:
C(n; k1, k2, ..., km) = n! / (k1! k2! ... km!)
where n is the total exponent (n = n), and k1, k2, ..., km are the exponents of each variable (k1 + k2 + ... + km = n).
In this case, since each variable x1, x2, ..., xm has the same exponent n, the multinomial coefficient can be simplified to:
C(n; n, n, ..., n) = n! / (n! n! ... n!) = n! / ([tex]n^m)[/tex]
Therefore, the number of different terms in the expansion of (x1 x2 ⋯ [tex]xm)^n,[/tex] after combining terms with identical sets of exponents, is given by n! / [tex](n^m).[/tex]
Learn more about binomial expansion here:
https://brainly.com/question/31363254
#SPJ11
Suppose you are tossing a coin repeated which comes up heads with chance 1/3. (a) Find an expression for the chance that by time m, heads has not come up. i.e. if X is the first time to see heads, determine P(X > m). (b) Given that heads has not come up by time m, find the chance that it takes at least n more tosses for heads to come up for the first time. I.e. determine P(X >m + n | X > m). Compare to P(X > m + n). You should find that P (X > m + n | X > m) = P(X > n) - this is known as the memorylessness property of the geometric distribution. The event that you have waited m time without seeing heads does not change the chance of having to wait time n to see heads.
(a) Let A denote the event that heads have not come up by time m. Then A= {T_1= T_2=...=T_m= T}, where T=Tail event and T_i denotes the outcome of the ith toss. By independence of the tosses, T_i=T with probability 2/3 and T_i=H with probability 1/3.
Thus, P(A)=P(T_1=T) P(T_2=T) ...P(T_m=T) = (2/3) ^m. Now, since A is the complement of the event B={X≤m}, i.e., B= {T_1= T_2=...=T_m= H}, so P(B) = 1-P(A) = 1-(2/3) ^m. Thus, P(X>m) =P(A)= (2/3) ^m.
(b) Suppose that heads have not come up by time m, and let A denote the event that it takes at least n more tosses for heads to come up for the first time. That is, A={X> m+n|X> m}. Then A={T_m+1=T_m+2=...=T_m+n=T}, where T_i denotes the outcome of the ith toss.
Since T_1, T_2, …, T_m are all tails, we can ignore them and find that P(A|P (T_m+1=T_m+2=...=T_m+n=T|T_1=T_2=...=T_m=T). By independence of tosses, T_m+1, T_m+2, ..., T_m+n is also independent of the previous tosses,
hence P(A|B) =P(T_m+1=T) P(T_m+2=T) …P(T_m+n=T) = (1/3) ^n.
The formula P(A|B) =P(A) is true, which is known as the memory lessness property of the geometric distribution. Hence, P(X>m+n|X>m) =P(A|B) =P(A)= (1/3) ^n.
Finally, we have P(X>m+n)=P(X>m+n,X>m)/P(X>m) =P(X>m+n)/P(X>m) = ((2/3) ^n)/((2/m) = (2/3) ^{n-m}.
Thus, we can compare the results and see that P(X>m+n|X>m) = P(X>n).
The event that you have waited m time without seeing heads does not change the chance of having to wait time n to see heads.
To know more about probability refer to:
https://brainly.com/question/27342429
#SPJ11
Consider a system given by -20 + x = 10 X + 0 u 0 y=[-1 2] a) Find the equilibrium solution xe b) Determine which equilibria a asymptotical stable c) Determine the equilibrium solutions are Lyapunov stable d) Determine if the system is BIBO stable.
a) The equilibrium solution is xe = -20/9.
b) The equilibrium solution xe = -20/9 is not asymptotically stable.
c) The equilibrium solution xe = -20/9 is not Lyapunov stable.
d) The system is BIBO stable.
(a) The equilibrium solution, we set the derivative of x to zero:
-20 + x = 10x + 0u
Simplifying the equation, we get:
-20 = 9x + 0u
Since there is no input (u = 0), we can ignore the second term. Solving for x, we have:
9x = -20
x = -20/9
Therefore, the equilibrium solution is xe = -20/9.
(b) To determine if the equilibrium is asymptotically stable, we need to analyze the stability of the system. The stability can be determined by examining the eigenvalues of the system matrix.
The system can be represented as follows:
A = 10
The eigenvalues of A are simply the elements on the diagonal, so we have one eigenvalue: λ = 10.
Since the eigenvalue λ = 10 is positive, the system is unstable. Therefore, the equilibrium xe = -20/9 is not asymptotically stable.
(c) To determine if the equilibrium solution is Lyapunov stable, we need to check if the system satisfies the Lyapunov stability criterion. The criterion states that for every ε > 0, there exists a δ > 0 such that if ||x(0) - xe|| < δ, then ||x(t) - xe|| < ε for all t > 0.
Since the system is unstable (as determined above), the equilibrium solution is not Lyapunov stable.
(d) BIBO (Bounded Input Bounded Output) stability refers to the stability of the system's output when the input is bounded. In this case, the system is described by x' = Ax + Bu, where u is the input. Since the input u is specified as 0, the system becomes x' = Ax + 0u = Ax.
The system matrix A = 10 does not depend on the input u. Therefore, the system is BIBO stable since it does not rely on the input and the output remains bounded.
To know more about equilibrium solution click here :
https://brainly.com/question/17767511
#SPJ4
can u guys help me answer this!!
One solution of this system include the following: B. (-1, -4).
How to graphically solve this system of equations?In order to graphically determine the solution for this system of equations on a coordinate plane, we would make use of an online graphing calculator to plot the given system of equations while taking note of the point of intersection;
y = x² + 4x - 1 ......equation 1.
y + 3 = x ......equation 2.
Based on the graph shown (see attachment), we can logically deduce that the solution for this system of equations is the point of intersection of each lines on the graph that represents them in quadrant III, which is represented by this ordered pairs (-1, -4) and (-2, -5).
Read more on solution and equation here: brainly.com/question/25858757
#SPJ1
For each situation, state the null and alternative hypotheses: (Type "mu" for the symbol μ , e.g. mu > 1 for the mean is greater than 1, mu < 1 for the mean is less than 1, mu not = 1 for the mean is not equal to 1. Please do not include units such as "mm" or "$" in your answer.)
a) The diameter of a spindle in a small motor is supposed to be 2.5 millimeters (mm) with a standard deviation of 0.17 mm. If the spindle is either too small or too large, the motor will not work properly. The manufacturer measures the diameter in a sample of 17 spindles to determine whether the mean diameter has moved away from the required measurement. Suppose the sample has an average diameter of 2.57 mm.
H0:
Ha:
(b) Harry thinks that prices in Caldwell are lower than the rest of the country. He reads that the nationwide average price of a certain brand of laundry detergent is $16.35 with standard deviation $2.20. He takes a sample from 3 local Caldwell stores and finds the average price for this same brand of detergent is $14.40.
H0:
Ha:
a. The null hypothesis (H0) states that the mean diameter of the spindles is equal to the required measurement of 2.5 mm. b. The null hypothesis (H0) states that the average price of the laundry detergent in Caldwell is greater than or equal to the nationwide average price of $16.35.
a) For the spindle diameter in the small motor:
H0: μ = 2.5 mm
Ha: μ ≠ 2.5 mm
The null hypothesis (H0) states that the mean diameter of the spindles is equal to the required measurement of 2.5 mm. The alternative hypothesis (Ha) suggests that the mean diameter has moved away from the required measurement, indicating that the spindles may be either too small or too large.
b) For the prices in Caldwell compared to the rest of the country:
H0: μ ≥ $16.35
Ha: μ < $16.35
The null hypothesis (H0) states that the average price of the laundry detergent in Caldwell is greater than or equal to the nationwide average price of $16.35. The alternative hypothesis (Ha) suggests that the average price in Caldwell is lower than the nationwide average price, supporting Harry's belief that prices in Caldwell are lower than the rest of the country.
Learn more about hypothesis here
https://brainly.com/question/606806
#SPJ11
what is the relationship between acceleration and time a(t) for the model rocket (v(t)=αt3 βt γ , where α=−3.0m/s4 , β=36m/s2 , and γ=1.0m/s) ?
The relationship between acceleration and time, a(t), for the model rocket, can be determined from its velocity function, v(t) = αt^3 + βt^2 + γ. Given the values of α, β, and γ, which are -3.0 m/s^4, 36 m/s^2, and 1.0 m/s respectively, the relationship between acceleration and time for the model rocket is given by a(t) = -9.0t^2 + 72t.
To find the acceleration function a(t), we differentiate the velocity function v(t) with respect to time. Taking the derivative of each term separately, we have:
dv/dt = d(αt^3)/dt + d(βt^2)/dt + d(γ)/dt
Differentiating each term, we get:
a(t) = 3αt^2 + 2βt + 0
Substituting the given values of α, β, and γ into the equation, we have:
a(t) = 3(-3.0)t^2 + 2(36)t + 0
Simplifying further, we have:
a(t) = -9.0t^2 + 72t
Therefore, the relationship between acceleration and time for the model rocket is given by a(t) = -9.0t^2 + 72t. This equation represents the acceleration experienced by the rocket at any given time t, where t is measured in seconds and the acceleration is given in units of m/s^2.
To learn more about velocity function click here: brainly.com/question/29080451
#SPJ11
Write the equations of functions satisfying the given properties, in expanded form. a. Cubic polynomial, x-intercepts at - and -2, y-intercept at 10. 14 b. Rational function, x-intercepts at -2,-2, 1; y-intercept at - %; vertical asymptotes at 2, 3, -4; horizontal asymptote at 1.
a) The equation in the expanded form is, f (x) = x³ + 3x² - 2x - 14.
b) we can write the equation in the form, f(x) = (x + 2)² (x - 1) / 32 (x - 2) (x - 1/2) (x + 4).
a. Cubic polynomial, x-intercepts at -1 and -2, y-intercept at 10.
The general form of a cubic polynomial function is f(x) = ax³ + bx² + cx + d, where a, b, c and d are constants.
Given x-intercepts are -1 and -2 and the y-intercept is 10.
We can assume that the polynomial has the factored form, f(x) = a(x + 1)(x + 2) (x - k), where k is a constant.
To find the value of k, we plug in the coordinates of the y-intercept into the equation ;
f(x) = a(x + 1)(x + 2) (x - k).
Putting x = 0 and y = 10, we get,
10 = a(1)(2) (-k)10 = -2ak
Solving for k,
-5 = ak.
Therefore, k = -5/a.
Substitute the value of k in the factored form, we get,
f(x) = a(x + 1)(x + 2) (x + 5/a)
To find the value of a, we can substitute the coordinates of a given point, say (0,10), in the equation ;
f(x) = a(x + 1)(x + 2) (x + 5/a)
Putting x = 0, y = 10
10 = a(1)(2) (5/a)10
a = 10 /( 2 × 5)
a = 1
The equation in the expanded form is, f (x) = x³ + 3x² - 2x - 14.
b. Rational function, x-intercepts at -2, -2, 1; vertical asymptotes at 2, ½, -4; horizontal asymptote at 1.
The general form of a rational function is f(x) = (ax² + bx + c) / (dx² + ex + f),
where a, b, c, d, e, and f are constants.
The given function has three x-intercepts, -2, -2, and 1, and the y-intercept is -1/4.
Therefore, we can write the function in the factored form as,
f(x) = k (x + 2)² (x - 1) / (x - p) (x - q) (x - r),
where k, p, q, and r are constants.
To find the value of k, we substitute the coordinates of the y-intercept into the equation ;
f(x) = k (x + 2)² (x - 1) / (x - p) (x - q) (x - r).
Putting x = 0, y = -1/4,
-1/4 = k (2)² (-p) (-q) (-r)
k = 1/32
The equation in the factored form is,
f(x) = (x + 2)² (x - 1) / 32 (x - p) (x - q) (x - r).
To find the values of p, q, and r, we can look at the vertical asymptotes. There are three vertical asymptotes at x = 2, 1/2, and -4.
Therefore, we can write the equation in the form,
f(x) = (x + 2)² (x - 1) / 32 (x - 2) (x - 1/2) (x + 4).
Learn more about asymptote here
brainly.com/question/4138300
#SPJ4
in the diagram of circle o, what is the measure of ? A.34°
B.45°
C.68°
D.73°
In the diagram of circle O, the measure of $\angle AOC$ can be calculated as follows;
Step 1: Identify the relationship between central angles and arcs: In a circle, a central angle is congruent to the arc it intercepts. $\angle AOC$ is a central angle, so it is congruent to arc AC.
Step 2: Use the formula to determine the arc measure: arc measure = central angle measure × $\frac{1}{360}$The central angle measure is 190°arc measure = 190° × $\frac{1}{360}$arc measure = 0.52778° (rounded to five decimal places)
Step 3: Determine the value of the angle $\angle AOC$:The measure of arc AC is 30° and $\angle AOC$ is congruent to arc AC. Therefore: $30° = 190° × \frac{1}{360}$$360° = 190° + \angle AOC $ Subtract 190 from each side:$170° = \angle AOC$ Thus, the correct option is D. 73°.
To know more about decimal refer to:
https://brainly.com/question/26090574
#SPJ11