The molar rate of sublimation of naphthalene from its surface is zero (mol/s)
To calculate the molar rate of sublimation of naphthalene from its surface, we need to use Fick's law of diffusion, which states:
J = -DAB * (dC/dx)
where:
J is the molar flux of naphthalene (mol/m²s),
DAB is the diffusivity coefficient of naphthalene in air (m²/s),
dC/dx is the concentration gradient of naphthalene (mol/m³m).
To find the concentration gradient, we'll use Henry's law, which relates the concentration of a gas above a liquid to its vapor pressure. Henry's law is given as:
C = (P / RT) * H
where:
C is the concentration of naphthalene (mol/m³),
P is the vapor pressure of naphthalene (Pa),
R is the ideal gas constant (8.314462 m³.Pa/mol.K),
T is the temperature (K),
H is the Henry's law constant (mol/m³.Pa).
To calculate the molar rate of sublimation, we need to find the concentration gradient at the surface of the naphthalene sphere. Since the surface temperature is equal to room temperature, which is lower than the ambient temperature, we can assume that the concentration gradient is zero. This is because there will be no net movement of naphthalene molecules from the surface to the surrounding air.
Therefore, the molar rate of sublimation of naphthalene from its surface is zero (mol/s)
Know more about molar rate:
https://brainly.com/question/15686124
#SPJ11
need help pleaseeeeeeeeeeeeeeeeeee
Using regression equation, the line of best fit is y = 30.53571x - 2.57143
What is the line of best fit?To calculate the line of best fit, we need to calculate using the regression equation.
From the data given;
Sum of x = 28
Sum of y = 837
Mean x = 4
Mean y = 119.5714
Sum of squares (SSx) = 28
Sum of products (SP) = 855
Regression Equation = y = bx + a
b = SP/SSx = 855/28 = 30.53571
a = My - bMx = 119.57 - (30.54*4) = -2.57143
y = 30.53571x - 2.57143
Learn more on line of best fit here;
https://brainly.com/question/17013321
#SPJ1
Type the correct answer in each box. Use numerals instead of words. If necessary, use / for the fraction bar(s).
The slope of the line shown in the graph is _____
and the y-intercept of the line is _____ .
The slope of the line shown in the graph is __2/3__
and the y-intercept of the line is __6___
How to find the slope and the y-intercept?The general linear equation is written as follows:
y = ax + b
Where a is the slope and b is the y-intercept.
On the graph we can see that the y-intercept is y = 6, then we can write the line as:
y = ax + 6
The line also passes through the point (-9, 0), replacing these values in the line we will get:
0 = a*-9 + 6
9a = 6
a = 6/9
a = 2/3
That is the slope.
Learn more about linear equations at:
https://brainly.com/question/1884491
#SPJ1
. Precise mass of 3,3-dimethylbutan-2-ol..... 1.53g Molecular mass of 3,3-dimethylbutan-2-ol..... .102.174 Net mass of alkene products. ... 84.169 Molecular mass of alkene products.. Theoretical yield of alkene products... % Yield of alkene products. 3 Sample number (gas chromatograph tray).. Use dimensional analysis (with unit cancellations) to calculate the theoretical yield and % yield. Show work: Table 7.2. List the alkene products in order of decreasing percentage. وا0.8
The theoretical yield of alkene products can be calculated using dimensional analysis by dividing the net mass of alkene products by the molecular mass of alkene products and multiplying by the molar mass of the alkene products. The percent yield of alkene products can be calculated by dividing the theoretical yield by the precise mass of 3,3-dimethylbutan-2-ol and multiplying by 100.
To calculate the theoretical yield of alkene products, we first need to determine the moles of alkene products by dividing the net mass of alkene products by the molecular mass of alkene products:
Moles of alkene products = Net mass of alkene products / Molecular mass of alkene products
Next, we can calculate the theoretical yield of alkene products by multiplying the moles of alkene products by the molar mass of the alkene products.
Theoretical yield of alkene products = Moles of alkene products * Molar mass of alkene products
To calculate the percent yield of alkene products, we divide the theoretical yield by the precise mass of 3,3-dimethylbutan-2-ol and multiply by 100:
% Yield of alkene products = (Theoretical yield / Precise mass of 3,3-dimethylbutan-2-ol) * 100
By performing these calculations, we can determine the theoretical yield and percent yield of the alkene products. Additionally, the alkene products can be listed in order of decreasing percentage by comparing their individual yields and arranging them accordingly.
To know more about Calculate visit-
brainly.com/question/31718487
#SPJ11
0.3: Show by integration that the strain energy in the tapered rod AB is 7. 12L A 48 G/min 90 where Imin is the polar moment of inertia of the rod at end B. T 1
The strain energy in the tapered rod AB can be determined through integration. The equation for the strain energy is given as 7.12LA/48Gmin90, where Imin represents the polar moment of inertia at end B.
Start by considering a small element of length dx along the tapered rod AB.The strain energy dU within this element can be expressed as (1/2)σ^2dx, where σ is the stress.To relate the stress to the strain, consider the formula σ = Eε, where E is the Young's modulus and ε is the strain.The strain ε can be calculated using the formula ε = dφ/dx, where φ is the angular displacement.The relationship between the angular displacement and the polar moment of inertia I is given as dφ = Mdx/I, where M is the bending moment.Substituting the expressions for strain and angular displacement, we have ε = (M/I)dx.The bending moment M can be related to the stress σ through the formula M = σI.Combining the previous equations, we get ε = (σ/I)dx.Substituting ε = dφ/dx into the strain energy equation, we have dU = (1/2)((σ/I)dx)^2dx.Integrating both sides of the equation from A to B, we get U = ∫[A to B] (1/2)((σ/I)^2dx)dx.Since the rod is tapered, the polar moment of inertia I varies along its length. To account for this, we can express I as a function of x, i.e., I = f(x).Integrating the equation with respect to x and substituting I = f(x), we obtain U = ∫[A to B] (1/2)((σ/f(x))^2dx)dx.The strain energy in the tapered rod AB can be determined by integrating the expression (1/2)((σ/f(x))^2dx)dx from end A to end B.
Learn more about Strain Energy :
https://brainly.com/question/28684254
#SPJ11
P2: Design a singly reinforced rectangular section to resist a factored moment of 33.5 L.m using bars with diameter of 22 mm (use normal weight concrete with compression strength of 28 MPa and reinforcing steel with yielding strength of 420 MPa). As 0000 -200 mm
To design a singly reinforced rectangular section to resist a factored moment of 33.5 L.m using bars with a diameter of 22 mm, with normal weight concrete (compression strength of 28 MPa) and reinforcing steel with a yielding strength of 420 MPa, we can use a section with a width of 150 mm, a depth of 681 mm, an effective depth of 670 mm, and a single 22 mm diameter bar for reinforcement.
To design a singly reinforced rectangular section to resist a factored moment of 33.5 L.m, we need to follow a step-by-step process. Let's break it down:
1. Determine the depth of the rectangular section (d): The depth of the section can be determined using the equation d = (M * 10^6) / (0.87 * f * b),
where M is the factored moment (33.5 L.m in this case),
f is the compressive strength of concrete (28 MPa), and
b is the width of the section.
Since the width is not given in the question, we'll assume it to be 150 mm.
[tex]d = (33.5 * 10^6) / (0.87 * 28 * 150)[/tex]
d ≈ 681 mm
2. Calculate the effective depth (d') of the section: The effective depth is given by d' = d - 0.5 * bar diameter.
Since the diameter of the bars is given as 22 mm, we can calculate the effective depth.
d' = 681 - 0.5 * 22
d' ≈ 670 mm
3. Determine the area of steel reinforcement (As): The area of steel reinforcement can be found using the equation [tex]As = (M * 10^6) / (0.87 * fy * d')[/tex], where fy is the yielding strength of the reinforcing steel (420 MPa).
[tex]As = (33.5 * 10^6) / (0.87 * 420 * 670)[/tex]
[tex]As ≈ 1399 mm^2[/tex]
4. Select the appropriate reinforcement: Based on the area of steel reinforcement calculated above ([tex]1399 mm^2[/tex]), we need to select the closest reinforcement bar size.
Since the diameter of the bars is given as 22 mm, we can choose a single 22 mm diameter bar.
In summary, to design a singly reinforced rectangular section to resist a factored moment of 33.5 L.m using bars with a diameter of 22 mm, with normal weight concrete (compression strength of 28 MPa) and reinforcing steel with a yielding strength of 420 MPa, we can use a section with a width of 150 mm, a depth of 681 mm, an effective depth of 670 mm, and a single 22 mm diameter bar for reinforcement.
Learn more about reinforcement from this link:
https://brainly.com/question/30792096
#SPJ11
Minimize f(x)=2x2 1-2 x1 x 2+2x2-6 x 1 +6
Subject to: x1+x2-2=0
Using the Lagrange multipliers technique. Compute the optimal point values for x1, x2, l y ll
In an optimization problem with equality constraints, what is the meaning of the values of the Lagrange multipliers?
The optimal point values for x1, x2, λ, and μ (Lagrange multipliers) in the given problem are:
x1 = 1
x2 = 1
λ = -4
μ = 2
To solve the optimization problem using the Lagrange multipliers technique, we first construct the Lagrangian function L(x1, x2, λ) by incorporating the equality constraint:
L(x1, x2, λ) = f(x1, x2) - λ(g(x1, x2))
Where f(x1, x2) is the objective function, g(x1, x2) is the equality constraint, and λ is the Lagrange multiplier.
In this case, the objective function is f(x1, x2) = 2x1^2 - 2x1x2 + 2x2 - 6x1 + 6, and the equality constraint is g(x1, x2) = x1 + x2 - 2.
The Lagrangian function becomes:
L(x1, x2, λ) = 2x1^2 - 2x1x2 + 2x2 - 6x1 + 6 - λ(x1 + x2 - 2)
To find the optimal values, we need to find the critical points by taking partial derivatives of L with respect to x1, x2, and λ and setting them equal to zero. Solving these equations simultaneously, we get:
∂L/∂x1 = 4x1 - 2x2 - 6 - λ = 0
∂L/∂x2 = -2x1 + 2 + λ = 0
∂L/∂λ = -(x1 + x2 - 2) = 0
Solving these equations, we find x1 = 1, x2 = 1, and λ = -4. Substituting these values into the equality constraint, we can solve for μ:
x1 + x2 - 2 = 1 + 1 - 2 = 0
Therefore, μ = 2.
The optimal point values for the variables in the optimization problem are x1 = 1, x2 = 1, λ = -4, and μ = 2. The Lagrange multipliers λ and μ represent the rates of change of the objective function and the equality constraint, respectively, with respect to the variables. They provide insights into the sensitivity of the objective function to changes in the constraints and can indicate the impact of relaxing or tightening the constraints on the optimal solution. In this case, the Lagrange multiplier λ of -4 indicates that a small increase in the equality constraint (x1 + x2 - 2) would result in a decrease in the objective function value. The Lagrange multiplier μ of 2 indicates the shadow price or the marginal cost of satisfying the equality constraint.
To know more about optimal point values visit:
https://brainly.com/question/9429432
#SPJ11
Draw the cash flow diagrams for the equipment given in the table and which one would you recommend to choose?
Equipment A B
Initial investment cost 35,000 TL 48,000 TL
Annual operating cost 3600 TL 2100 TL
Scrap value 5000 TL 9000 TL
Economic life 8 years 8 years
Interest rate 20% 20%
By comparing the NPV values of Equipment A and Equipment B, we can determine which one is more favorable. If the NPV is positive, it indicates that the investment is profitable. If the NPV is negative, it suggests that the investment may not be a good choice.
The cash flow diagrams for Equipment A and Equipment B can be drawn as follows:
Equipment A:
Year 0: -35,000 TL (Initial investment cost)
Year 1-8: -3,600 TL (Annual operating cost)
Year 8: +5,000 TL (Scrap value)
Equipment B:
Year 0: -48,000 TL (Initial investment cost)
Year 1-8: -2,100 TL (Annual operating cost)
Year 8: +9,000 TL (Scrap value)
To determine which equipment to choose, we need to consider the net present value (NPV) of each equipment. NPV helps us assess the profitability of an investment by considering the time value of money.
To calculate NPV, we need to discount the cash flows at the given interest rate of 20% per year. Here is the calculation for both equipment:
For Equipment A:
NPV = -35,000 + (-3,600 / (1+0.2)^1) + (-3,600 / (1+0.2)^2) + ... + (-3,600 / (1+0.2)^8) + (5,000 / (1+0.2)^8)
For Equipment B:
NPV = -48,000 + (-2,100 / (1+0.2)^1) + (-2,100 / (1+0.2)^2) + ... + (-2,100 / (1+0.2)^8) + (9,000 / (1+0.2)^8)
By comparing the NPV values of Equipment A and Equipment B, we can determine which one is more favorable. If the NPV is positive, it indicates that the investment is profitable. If the NPV is negative, it suggests that the investment may not be a good choice.
It's important to note that without the exact values for the annual cash inflows (if any) associated with each equipment, we can only consider the initial investment cost, annual operating cost, and scrap value. The decision on which equipment to choose ultimately depends on the specific requirements and financial goals of the investor.
Learn more about scrap value from the given link:
https://brainly.com/question/31441389
#SPJ11
An ionic compound contains A^4+ and B^2- ions. Determine the chemical formula of this compound.
a)A₂B4 b)A₂B
the chemical formula of this compound is A₂B₄ (option a).
To determine the chemical formula of the compound containing [tex]A^4+ and B^2[/tex]- ions, we need to balance the charges of the ions.
The charge of [tex]A^{4+}[/tex] indicates that A has a 4+ charge, while the charge of [tex]B^{2- }[/tex]indicates that B has a 2- charge.
In order to balance the charges, we need to find the least common multiple (LCM) of 4 and 2, which is 4.
To achieve a net charge of zero in the compound, we need 4 B^2- ions to balance the 4+ charge of A.
To know more about LCM visit:
brainly.com/question/24510622
#SPJ11
Calculator
allowed
a) Calculate the cross-sectional area of this cylinder.
b) Calculate the volume of this cylinder.
Give your answers to 1 d. p.
Bookwork code: R96
17 cm
15 cm
The cross-sectional area of the cylinder is approximately 706.9 [tex]cm^2[/tex], and the volume is approximately 12066.4[tex]cm^3[/tex].
a) To calculate the cross-sectional area of a cylinder, we need to use the formula for the area of a circle, which is [tex]πr^2[/tex]. In this case, the radius of the cylinder is given as 15 cm. The cross-sectional area can be calculated as:
Cross-sectional area = [tex]π * (radius)^2[/tex]
Cross-sectional area = [tex]π * (15 cm)^2[/tex]
Cross-sectional area ≈ [tex]π * (15 cm)^2[/tex][tex]π * (15 cm)^2[/tex]
b) The volume of a cylinder can be calculated using the formula V = [tex]πr^2h[/tex], where r is the radius and h is the height of the cylinder. In this case, the radius is again 15 cm, and the height is given as 17 cm. Plugging in these values, we get:
[tex]Volume = π * (radius)^2 * heightVolume = π * (15 cm)^2 * 17 cmVolume ≈ 12066.4 cm^3[/tex]
The cross-sectional area of the cylinder is approximately 706.9[tex]cm^2[/tex], and the volume is approximately 12066.4[tex]cm^3[/tex].
For more such questions on cross-sectional area
https://brainly.com/question/12820099
#SPJ8
A horizontal curve was designed for a two-lane highway with 10-foot lanes and 4-foot shoulders. The curve has the following conditions: • R=140 feet • Side friction = 0.348 Large building exists on the inside of the curve. Inside edge of road (shoulder) is 10 feet from the building. Assume perception and reaction time is 2.5 second and a = 11.2 ft/sec^2 Calculate the design speed of the curve.
Clearance distance is to be provided to the object for covering the horizontal distance of the inner side of the curve for the adequate slight distance so required. By calculating, the design of the inner circle will be 2.67m.
Now, we have to assume that the length is more than the distance.
m = ( R - D) - ( R - D ) × Cos [tex]\frac{\alpha }{2}[/tex]
where, m is distance
R is radius of the curve
D is the distance
α is the angle of the radius
Hence, the formula is
[tex]\frac{\alpha }{2}[/tex] = SSD × 180 / 2 × π × (R -D)
now, L = 200m , SSD = 80m and R = 300m
d= 7.5/4 = 1.875m
[tex]\frac{\alpha }{2}\\[/tex] = 80 × 180 / 2 × π and (300 - 1.875)
[tex]\frac{\alpha }{2}[/tex] = 7.687
m = 2.67m
Therefore, the distance from the center line of the circle is 2.67m.
To learn more about distance :
https://brainly.com/question/26550516
#SPJ4
Q1: What is stacker and reclaimer? What are the types of stacker and reclaimer? Q2: Compare between the types of stacker and reclaimer?
1) A stacker and reclaimer are types of equipment commonly used in material handling systems, particularly in bulk material storage yards, such as those found in mines, ports, and power plants.
2) There are different types of stackers and reclaimers available, and their selection depends on various factors such as the specific application, material characteristics, required stacking and reclaiming capacity, and available space.
We have to give that,
1) Define stacker and reclaimer.
2) Compare the types of stacker and reclaimer.
1) A stacker and reclaimer are types of equipment commonly used in material handling systems, particularly in bulk material storage yards, such as those found in mines, ports, and power plants.
They are used for efficient stacking and reclaiming of bulk materials like coal, ore, limestone, and more.
A stacker, as the name suggests, is used to stack bulk materials in an organized manner. It consists of a long arm or boom that can move in multiple directions and a conveyor system.
The stacker travels along a rail or track, allowing it to create stockpiles of materials in a specific area.
On the other hand, a reclaimer is used to reclaim or retrieve materials from a stockpile.
It is designed to move along the stockpile, usually through a bucket wheel or scraper system.
The reclaimed materials are then transported to another location through a conveyor system for further processing or transportation.
2) There are different types of stackers and reclaimers available, and their selection depends on various factors such as the specific application, material characteristics, required stacking and reclaiming capacity, and available space. Here are some common types:
Stacker Types:
Radial Stacker: This type of stacker can rotate around a central pivot point, allowing it to create a circular stockpile.
Linear Stacker: It moves in a straight line along a track, creating rectangular or trapezoidal stockpiles.
Slewing Stacker: It has a slewing mechanism that allows the boom to move horizontally, enabling it to stack materials in multiple storage areas.
Reclaimer Types:
Bucket-Wheel Reclaimer: It employs a large wheel with buckets that scoop up the materials and transfer them onto a conveyor.
Bridge-Type Reclaimer: It consists of a bridge-like structure with a bucket-wheel or scraper system that reclaims materials from the stockpile.
Portal Reclaimer: It uses a portal or gantry structure with a bucket-wheel or scraper system, providing flexibility in the stockpile area.
When comparing stacker and reclaimer types, factors to consider include stacking/reclaiming efficiency, capacity, maneuverability, power consumption, maintenance requirements, and cost.
It's essential to choose the appropriate type based on specific operational needs and constraints to optimize material handling processes.
For more such questions Stacker, click on
brainly.com/question/29472958
#SPJ4
What is the pH of a solution containing 0.02 moles A- and 0/01
moles HA? pKa of HA = 5.6
Step by step
The pH of the solution containing 0.02 moles A- and 0.01 moles HA is approximately 5.901.
The pH of a solution can be determined using the Henderson-Hasselbalch equation:
pH = pKa + log([A-]/[HA])
In this case, we have the pKa of HA as 5.6, [A-] (concentration of A-) as 0.02 moles, and [HA] (concentration of HA) as 0.01 moles.
Let's substitute the values into the equation:
pH = 5.6 + log(0.02/0.01)
First, we calculate the ratio of [A-]/[HA]:
[A-]/[HA] = 0.02/0.01 = 2
Now, we substitute this ratio into the equation:
pH = 5.6 + log(2)
Next, we calculate the logarithm of 2:
log(2) = 0.301
Now, we substitute this value into the equation:
pH = 5.6 + 0.301
Finally, we calculate the pH:
pH = 5.901
Therefore, the pH of the solution containing 0.02 moles A- and 0.01 moles HA is approximately 5.901.
learn more about solution on :
https://brainly.com/question/25326161
#SPJ11
The pH of the solution containing 0.02 moles A- and 0.01 moles HA is approximately 5.901.
The pH of a solution can be calculated using the Henderson-Hasselbalch equation, which relates the pH of a solution to the pKa of the acid and the ratio of the concentration of the conjugate base to the concentration of the acid.
Here are the steps to determine the pH of the solution containing 0.02 moles A- and 0.01 moles HA:
1. Calculate the ratio of [A-] to [HA]:
[A-]/[HA] = 0.02 moles / 0.01 moles = 2
2. Use the pKa value of HA to find the Ka value:
pKa = -log10(Ka)
5.6 = -log10(Ka)
Take the antilog of both sides:
10^5.6 = Ka
Ka = 2.51 x 10^-6
3. Substitute the values into the Henderson-Hasselbalch equation:
pH = pKa + log10([A-]/[HA])
pH = 5.6 + log10(2)
Calculate the log value:
log10(2) ≈ 0.301
Substitute into the equation:
pH ≈ 5.6 + 0.301
pH ≈ 5.901
Therefore, the pH of the solution containing 0.02 moles A- and 0.01 moles HA is approximately 5.901.
Please note that this answer is accurate to the given information and assumes that the solution only contains A- and HA. Other factors, such as the presence of water or other ions, may affect the pH calculation differently.
Learn more about Henderson-Hasselbalch equation from this link
https://brainly.com/question/16963838
#SPJ11
When the following equation is balanced properly under acidic conditions, what are the coefficients of the species shown? Mg2+ Cro4² + Water appears in the balanced equation as a product, neither) with a coefficient of How many electrons are transferred in this reaction? Cr3+ Submit Answer + Mg (reactant, (Enter 0 for neither.) Retry Entire Group 9 more group attempts remaining q When the following equation is balanced properly under acidic conditions, what are the coefficients of the species shown? Cr3+ CIO3 + Water appears in the balanced equation as a product, neither) with a coefficient of How many electrons are transferred in this reaction?
The coefficients of the species in the balanced equation are:
- Mg2+: 1
- CrO4²-: 1
- H2O: 4
- H+: 8
When balancing an equation under acidic conditions, we need to make sure that the number of atoms of each element is the same on both sides of the equation.
For the equation:
Mg2+ + CrO4²- + H2O → (product)
To balance this equation, we need to determine the coefficients of each species. Let's go step by step:
1. Start by balancing the atoms other than hydrogen and oxygen. In this case, we have one magnesium ion (Mg2+) and one chromate ion (CrO4²-) on the left side of the equation. To balance these, we need to put a coefficient of 1 in front of each species:
Mg2+ + CrO4²- + H2O → (product)
2. Now let's balance the oxygen atoms. On the left side, there are four oxygen atoms in the chromate ion, so we need four water molecules (H2O) on the right side to balance the oxygen:
Mg2+ + CrO4²- + 4H2O → (product)
3. Finally, let's balance the hydrogen atoms. On the right side, we have 8 hydrogen atoms from the 4 water molecules. To balance this, we need to add 8 hydrogen ions (H+) on the left side:
Mg2+ + CrO4²- + 4H2O → (product) + 8H+
The coefficients of the species in the balanced equation are:
- Mg2+: 1
- CrO4²-: 1
- H2O: 4
- H+: 8
Now, moving on to the second part of the question, the number of electrons transferred in this reaction can be determined by looking at the change in oxidation states of the elements involved. However, the equation provided is incomplete, as there is no reactant specified. Therefore, it is not possible to determine the number of electrons transferred in this reaction without additional information.
Learn more about coefficients of the species :
https://brainly.com/question/1038771
#SPJ11
A heater is fed with a fully defined stream (known composition, molar flow, temperature and pressure). The outlet temperature, heating duty and pressure drop across the heater have also been fixed. How many degrees of freedom are there?
The number of degrees of freedom in a system refers to the number of independent variables that can be freely chosen. In this case, let's break down the given information and determine the degrees of freedom.
1. Known composition, molar flow, temperature, and pressure of the inlet stream. These are all specified values, so they do not contribute to the degrees of freedom.
2. Outlet temperature: The outlet temperature is fixed, which means it cannot be changed independently. Therefore, it does not contribute to the degrees of freedom.
3. Heating duty: The heating duty is also fixed, meaning it cannot be varied independently. Hence, it does not contribute to the degrees of freedom.
4. Pressure drop across the heater: The pressure drop is fixed, so it does not introduce any additional degrees of freedom.
Considering all these factors, we can conclude that in this specific situation, there are no degrees of freedom. All the relevant variables and parameters have been predetermined or fixed, leaving no room for independent adjustments.
To know more about degrees of freedom :
https://brainly.com/question/32093315
#SPJ11
TEST5
Measure out 2 ml of potassium dichromate (VI) solution into a test tube then add 1 ml of dilute sulphuric acid. Add 2 ml of ethanol and warm in a water bath for 3-4 minutes. Make observations all through the process (including the smell of the product in the test tube).
Initial- uniform orange color. After Water bath-Olive green color. Smells like apples.
TEST6
Measure 5 ml of ethanol into a test tube; add 10 drops of concentrated (CARE!!) sulfuric acid. Then add 5 ml of propanoic acid. Place in the water bath for 5 minutes. Out of the water bath, pour the contents into 25 ml of water in a small beaker. Make observations for ALL three steps of the expt.
Initial- no layers seen after adding ethanol to sulfuric acid and propionic acid, soluble.
After water bath- thin layer seen at top of meniscus.
After pouring contents into beaker of water- Clear distinct separation of layers seen with the product forming the top layer. Top id cloudy. Bottom is clear. Smells like pineapple (Ester is the product that forms t
(a) Name the type of reaction ethanol underwent in Test 5. ______________________________________
(b) Explain the reaction which caused the color change in Test 5 ___________________________________________
__________________________________________________________________________________________________
6. (a) What type of reaction happened in Test 6? ____________________________________________
(b) Give one role of conc. sulfuric acid in test 6 __________________________________________________________
(c) Write the equation for the reaction in Test 6 __________________________________________________________
(d) Identify the smell/odor of the product in Test 6 _________________________
(a) The type of reaction ethanol underwent in Test 5 is oxidation reaction.
(b) The reaction which caused the color change in Test 5 is the reduction of the potassium dichromate ions by ethanol. The reduction of potassium dichromate (VI) to chromium (III) ions causes the orange color to change to olive green color. The green colour is produced by chromium (III) ions.
(a) In Test 6, the type of reaction that happened is esterification reaction.
(b) Concentrated sulfuric acid is a catalyst in the test 6. It helps in the formation of the ester as it increases the rate of the reaction by providing a pathway for the reaction.
(c) The equation for the reaction in Test 6 is: Propanoic acid + ethanol → Ethyl propanoate + water
(d) The smell/odor of the product in Test 6 is pineapple.
Based on these observations, it suggests that an oxidation reaction occurred in which the potassium dichromate (VI) was reduced by ethanol, resulting in the color change from orange to olive green. The smell of apples indicates the presence of a specific compound or ester formed during the reaction.
Learn more about distilled water:
brainly.com/question/23802525
#SPJ11
Part 1) Draw the shear diagram for the cantilever beam.
Part 2) Draw the moment diagram for the cantilever beam.
We draw Part 1) the shear diagram for the cantilever beam. Part 2) the moment diagram for the cantilever beam.
Part 1) To draw the shear diagram for a cantilever beam, follow these steps:
1. Identify the different sections of the beam, including the support and any point loads or reactions.
2. Start at the left end of the beam, where the support is located. Note that the shear force at this point is usually zero.
3. Move along the beam and consider each load or reaction. If there is a point load acting upward, the shear force will decrease. If there is a point load acting downward, the shear force will increase.
4. Plot the shear forces as points on a graph, labeling each point with its corresponding location.
5. Connect the points with straight lines to create the shear diagram.
6. Make sure to include the units (usually in Newtons) and the scale of the diagram.
Part 2) To draw the moment diagram for the cantilever beam, follow these steps:
1. Start at the left end of the beam, where the support is located. Note that the moment at this point is usually zero.
2. Move along the beam and consider each load or reaction. If there is a point load acting upward or downward, it will create a moment. The moment will be positive if it causes clockwise rotation and negative if it causes counterclockwise rotation.
3. Plot the moments as points on a graph, labeling each point with its corresponding location.
4. Connect the points with straight lines to create the moment diagram.
5. Make sure to include the units (usually in Newton-meters or foot-pounds) and the scale of the diagram.
Remember to pay attention to the direction of the forces and moments to ensure accuracy. Practice drawing shear and moment diagrams with different types of loads to improve your understanding.
Learn more about the cantilever beam from the given link-
https://brainly.com/question/27910839
#SPJ11
Indigo and her children went into a restaurant and she bought $42 worth of
hamburgers and drinks. Each hamburger costs $5. 50 and each drink costs $2. 25. She
bought a total of 10 hamburgers and drinks altogether. Write a system of equations
that could be used to determine the number of hamburgers and the number of drinks
that Indigo bought. Define the variables that you use to write the system
Answer:
x+y=10
2.25x+5.50y=42
Extra: 6 hamburgers and 4 drinks
Step-by-step explanation:
x+y=10
2.25x+5.50y=42
x would stand for the drinks and y would stand for the hamburger
I do not know if you want me to solve it or not, but I might as well do so.
To solve it, you could multiply the first equation by 2.25 to get:
2.25x+2.25y=22.5
2.25x+5.50y=42
Now, if you subtract the two systems of equations, you get 3.25y=19.5, where y is equal to 6.
When you plug in 6 for y in the first equation, you should find that x is equal to 4.
In conclusion, Indigo ordered 6 hamburgers and 4 drinks.
When we use the term ideal fluid, we neglect: O density O pressure O energy conservation O friction and we assume laminar flow
When using the term ideal fluid, the assumption of neglecting friction is made. Frictional forces are not considered in ideal fluid analysis, while other factors such as density, pressure, energy conservation, and laminar flow are still accounted for.
An ideal fluid is a theoretical concept used in fluid mechanics to simplify the analysis of fluid flow. When considering an ideal fluid, certain assumptions are made to simplify the equations and calculations involved. These assumptions include neglecting friction.
Friction is the resistance encountered by a fluid when it flows over a surface or through a pipe. In real-world scenarios, frictional forces play a significant role in fluid flow, causing energy losses and affecting the behavior of the fluid. However, when dealing with ideal fluids, friction is ignored to simplify the analysis.
Other options listed in the question:
- Density: In ideal fluid analysis, density is not neglected. The density of the fluid is still considered and can affect the calculations.
- Pressure: In ideal fluid analysis, pressure is also considered and plays a role in determining the fluid behavior.
- Energy conservation: Energy conservation is still a fundamental principle in fluid mechanics, even when dealing with ideal fluids. It is not neglected.
- Laminar flow: The assumption of laminar flow is often made when analyzing ideal fluids. Laminar flow refers to smooth, orderly flow without turbulence. It is one of the simplifying assumptions used in ideal fluid analysis.
Learn more about friction visit:
https://brainly.com/question/24338873
#SPJ11
10. Point out the safety control measures resulting from the following tasks a) Operation of centrifugal pump which is used to pump p sea water to the desalination plant b) Producing 200mpsig of compressed air for the instrument airline and for pneumatic valve
a). Providing proper training to the operators on the safe operation of the centrifugal pump.
b). Safety measures may be required depending on specific local regulations and industry standards.
a) Operation of centrifugal pump used to pump sea water to the desalination plant:
Regular maintenance and inspection: Implementing a maintenance and inspection schedule for the centrifugal pump to ensure its proper functioning and identify any potential issues or wear.
Safety guards and interlocks: Installing safety guards and interlocks around the pump to prevent accidental contact with moving parts and to ensure that the pump shuts off automatically if any safety parameter is breached.
Emergency shutdown systems: Installing emergency shutdown systems that can quickly stop the pump in case of an emergency or abnormal conditions, such as excessive pressure or flow.
Overload protection: Equipping the pump with overload protection mechanisms to prevent damage caused by excessive loads or power surges.
Pressure relief valves: Installing pressure relief valves in the system to prevent overpressure situations and protect the pump from potential damage.
Training and supervision: Providing proper training to the operators on the safe operation of the centrifugal pump and ensuring that they are adequately supervised to prevent any unsafe practices.
b) Producing 200mpsig of compressed air for the instrument airline and for pneumatic valve:
Pressure regulation: Implementing pressure regulation systems to ensure that the compressed air is maintained at the desired pressure level and prevent overpressurization.
Pressure relief valves: Installing pressure relief valves in the compressed air system to prevent excessive pressure buildup and protect the system from potential damage.
Regular maintenance and inspection: Conducting regular maintenance and inspections of the compressed air system, including checking for leaks, proper lubrication, and the condition of valves and fittings.
Quality control: Ensuring that the compressed air produced meets the required quality standards, including proper filtration and moisture removal, to prevent contamination of instruments and pneumatic valves.
Proper storage and handling: Providing appropriate storage and handling procedures for compressed air cylinders and ensuring that they are securely stored and transported to prevent accidents.
Training and awareness: Providing training to personnel on the safe handling and use of compressed air systems, including proper use of equipment, understanding pressure ratings, and recognizing potential hazards.
To know more about centrifugal pump, visit:
https://brainly.com/question/30730610
#SPJ11
a) Find the equation of the line that is perpendicular to the line y=4x-3 and passes through the same point on the OX axis. b) What transformations and in what order should be done with the graph of the function f(x) to obtain the graph of the function h(x) =5f(3x-2)-3
The equation of the line that is perpendicular to the line y=4x-3 and passes through the same point on the OX axis:
a) For two lines to be perpendicular, the slope of one line should be the negative reciprocal of the other.
We need to find the value of b.
To do this, we use the fact that the line passes through the point (a, 0).y = (-1/4)x + b0 = (-1/4)a + b => b = (1/4)a
So the equation of the line is:
y = (-1/4)x + (1/4)a
b) What transformations and in what order should be done with the graph of the function f(x) to obtain the graph of the function h(x) =5f(3x-2)-3The function h(x) = 5f(3x - 2) - 3 is obtained from the function f(x) by applying the following transformations:1.
Horizontal compression by a factor of 1/3. This is because the argument of f is multiplied by 3.2. Horizontal shift to the right by 2 units. This is because we subtract 2 from the argument of f.3. Vertical stretch by a factor of 5.
This is because the function f is multiplied by 5.4. Vertical shift down by 3 units. This is because we subtract 3 from the function f.
To know more about perpendicular visit:
https://brainly.com/question/11707949
#SPJ11
Given f (8) = 2, f' (8) = 7, g (8) = − 1, and g′ (8) = 9, find the values of the following. (a) (fg)' (8) = (b) (1) ² (8) = = Number Number
a - (fg)'(8) equals 11.
b -(1)²(8) equals 8
(a) To find the value of (fg)'(8), we can use the product rule for differentiation. According to the product rule, the derivative of the product of two functions f(x) and g(x) is given by:
(fg)'(x) = f'(x)g(x) + f(x)g'(x)
Substituting the given values, we have:
(fg)'(8) = f'(8)g(8) + f(8)g'(8)
= (7)(-1) + (2)(9)
= -7 + 18
= 11
Therefore, (fg)'(8) equals 11.
(b) To find the value of (1)²(8), we simply substitute 8 into the expression:
(1)²(8) = 1²(8)
= 1(8)
= 8
Therefore, (1)²(8) equals 8.
learn more about function
brainly.com/question/30721594
#SPJ11
A 10m- propped cantilever beam, that is, the support at one-end is roller and the other end is fixed. The bending strength or what we call the flexural strength is equivalent to 700 kN-m. Determine the permissible load based on flexural capacity.
56 kN-m
48 kN-m
45 kN-m
42 kN-m
The permissible load based on flexural capacity is 560 kN-m. Hence, option A, i.e. 56 kN-m is the correct answer.
Given the data: Length of the cantilever beam = 10 m
Flexural strength = 700 kN-m
Permissible load based on flexural capacity is to be determined.
A cantilever beam is a beam that is fixed at one end and free at the other end. A roller support is a kind of support that only provides a reaction force perpendicular to the surface of contact.
Let's begin solving this question and find the permissible load based on flexural capacity.
The maximum bending moment that the cantilever beam can support is given by:
M = WL/2
where W is the load applied, L is the length of the beam and M is the maximum bending moment.
Since the beam is a propped cantilever beam with one end fixed and the other end as a roller, the maximum bending moment is given by:
M = WL/8
where W is the load applied and L is the length of the cantilever beam. (Note: In the case of a propped cantilever beam, the maximum bending moment is one-eighth of the length of the beam.)
Now, since the flexural strength of the cantilever beam is given as 700 kN-m, the permissible load based on flexural capacity is given by:
W = 8M/L
= (8 × 700)/10
= 560 kN-m
Conclusion: The permissible load based on flexural capacity is 560 kN-m.
Hence, option A, i.e. 56 kN-m is the correct answer.
To know more about capacity visit
https://brainly.com/question/32280634
#SPJ11
Suppose a 500 , mL flask is filled with 2.0 mol of H_2and 1.0 mol of HI. The following reaction becomes possible: H_2( g)+I_2( g)⇌2HI(g) The equilibrium constant K for this reaction is 2.95 at the temperature of the flask. Calculate the equilibrium molarity of I_2. Round your answer to two decimal places.
The reaction is:H2(g) + I2(g) ⇌ 2HI(g)Given,Amount of H2 in the flask = 2.0 molAmount of HI in the flask = 1.0 molAt equilibrium, let the number of moles of I2 be "x".
Then the number of moles of HI is "1-x" and the number of moles of H2 is "2-x".The equilibrium constant Kc for the reaction is given as:Kc = [HI]^2 / [H2] [I2]Substituting the values, By solving the above equation for x, the value of x will be obtained, which gives the molarity of I2 at equilibrium.
To obtain the numerical value of x, let us take the square root of both sides of the equation and multiply by the denominators to isolate the term x:2.95 [(2 - x) × x] = [(1 - x)/ 0.5]²590 x² - 1175 x + 580 = 0Solving the quadratic equation above gives:x = 0.612 MThus, the equilibrium molarity of I2 is 0.61 M (rounded to two decimal places).
To know more about reaction visit :
https://brainly.com/question/30464598?
#SPJ11
Find the arc length of the curve x=3sinθ−sin3θ ,y=3cosθ−cos3θ,
0≤θ≤π/2
The arc length of the curve is (3/2)sqrt[2] + (3/4)πsqrt[2], or approximately 6.368 units.
To find the arc length of the curve, we can use the formula:
L = ∫(a to b) sqrt[dx/dθ)^2 + (dy/dθ)^2] dθ
where a and b are the limits of integration.
First, we need to find dx/dθ and dy/dθ.
dx/dθ = 3cosθ - 3cos(3θ)
dy/dθ = -3sinθ + 3sin(3θ)
Next, we substitute these into the formula for arc length and evaluate the integral:
L = ∫(0 to π/2) sqrt[(3cosθ - 3cos(3θ))^2 + (-3sinθ + 3sin(3θ))^2] dθ
= ∫(0 to π/2) sqrt[9cos^2θ - 18cosθcos(3θ) + 9cos^2(3θ) + 9sin^2θ - 18sinθsin(3θ) + 9sin^2(3θ)] dθ
= ∫(0 to π/2) sqrt[18 - 18(cos^2θcos(3θ) + sin^2θsin(3θ))] dθ
= ∫(0 to π/2) sqrt[18 - 18sin(θ)cos(θ)(cos^2(2θ) + sin^2(2θ))] dθ
= ∫(0 to π/2) sqrt[18 - 18sin(θ)cos(θ)] dθ
= ∫(0 to π/2) 3sqrt[2]sqrt[2 - 2sin(2θ)] dθ (using the trig identity sin(θ)cos(θ) = (1/2)sin(2θ))
We can then use the substitution u = 2θ, du = 2dθ to simplify the integral:
L = (3sqrt[2]/2) ∫(0 to π) sqrt[2 - 2sin(u)] du
= (3sqrt[2]/2) ∫(0 to π/2) sqrt[2 - 2sin(u)] du + (3sqrt[2]/2) ∫(π/2 to π) sqrt[2 - 2sin(u)] du (since sqrt[2 - 2sin(u)] is an even function)
Using the substitution v = cos(u), dv = -sin(u)du, we can simplify further:
L = (3sqrt[2]/2) ∫(0 to 1) sqrt[2 - 2v^2] dv + (3sqrt[2]/2) ∫(0 to 1) sqrt[2 - 2v^2] dv
= 3sqrt[2] ∫(0 to 1) sqrt[2 - 2v^2] dv
We can now use the trig substitution v = sin(t) to complete the integral:
L = 3sqrt[2] ∫(0 to π/2) sqrt[2 - 2sin^2(t)] cos(t) dt (since dv = cos(t)dt)
= 3sqrt[2] ∫(0 to π/2) sqrt[2cos^2(t)] cos(t) dt (using the identity sin^2(t) + cos^2(t) = 1)
= 3sqrt[2] ∫(0 to π/2) 2cos^2(t) dt
= 3sqrt[2] [sin(t)cos(t) + (1/2)t] |_0^(π/2)
= 3sqrt[2] [(1/2)(1) + (1/4)π]
= (3/2)sqrt[2] + (3/4)πsqrt[2]
Therefore, the arc length of the curve is (3/2)sqrt[2] + (3/4)πsqrt[2], or approximately 6.368 units.
Learn more about length from
https://brainly.com/question/2217700
#SPJ11
the lengths of AC and BC are equal at 5 units.
Part B
Slide point C up and down along the perpendicular bisector, CD. Make sure to test for the case when point C is below AB
as well. Does the relationship between the lengths of AC and BC change? If so, how?
The relationship between the lengths of AC and BC does not change as long as point C stays on the perpendicular bisector. They will remain equal in length. However, if point C is below AB, the lengths of AC and BC will still be equal but less than 5 units.
In the given scenario where the lengths of AC and BC are equal at 5 units, let's analyze the relationship between AC and BC as point C is moved up and down along the perpendicular bisector, CD.
When point C is on the perpendicular bisector, CD, it means that AC and BC are equidistant from the line AB. Since the lengths of AC and BC are equal initially at 5 units, this means that AC and BC will remain equal as long as point C stays on the perpendicular bisector.
Now, let's consider the case when point C is below AB, meaning it is located at a lower position than AB on the perpendicular bisector. In this case, AC and BC will still be equal in length, but their values will be less than 5 units. The exact length will depend on the specific position of point C below AB.
To sum up, as long as point C remains on the perpendicular bisector, there is no change in the relationship between the lengths of AC and BC. They will continue to be the same length. The lengths of AC and BC will still be equal but will be fewer than 5 units if point C is lower than point AB.
for such more question on lengths
https://brainly.com/question/20339811
#SPJ8
a) The population of Suffolk County, NY is projected to be 1,534,811 in the
year 2040. In the year 2000, the average per capita water use in Suffolk County was 112
gallons per person per day. What is the estimated water use (in million gallons per day) in
Suffolk County in 2040 if water conservation efforts reduce per capita water use by 15%
compared to the year 2000?
b) In the year 2000, Public Water Systems in the State of New York supplied
2560 million gallons of water per day to 17.1 million people for both domestic and
industrial use. what is the average per capita sewage flow in New York assuming a return
of 67% of the supply?
a) The average per capita sewage flow in New York is 100 gallons per person per day.
b) The estimated water use in Suffolk County in 2040 is approximately 146,221,067.2 gallons per day.
a) To find the estimated water use in Suffolk County in 2040, we need to consider the projected population and the change in per capita water use compared to the year 2000.
First, we calculate the reduction in per capita water use by multiplying the average per capita water use in 2000 (112 gallons per person per day) by 15% (0.15).
112 gallons/day * 0.15 = 16.8 gallons/day
Next, we subtract this reduction from the average per capita water use in 2000 to find the estimated per capita water use in 2040.
112 gallons/day - 16.8 gallons/day = 95.2 gallons/day
Finally, we multiply the estimated per capita water use in 2040 (95.2 gallons/day) by the projected population of Suffolk County in 2040 (1,534,811 people) to find the estimated water use in Suffolk County in 2040.
95.2 gallons/day * 1,534,811 people = 146,221,067.2 gallons/day
Therefore, the estimated water use in Suffolk County in 2040 is approximately 146,221,067.2 gallons per day.
b) To find the average per capita sewage flow in New York, we need to calculate the return of the water supply and divide it by the number of people.
First, we calculate the return of the water supply by multiplying the total water supplied by the return rate of 67%.
2560 million gallons/day * 0.67 = 1715.2 million gallons/day
Next, we divide the return of the water supply by the number of people to find the average per capita sewage flow.
1715.2 million gallons/day / 17.1 million people = 100 gallons/person/day
Therefore, the average per capita sewage flow in New York is 100 gallons per person per day.
To learn more about average
https://brainly.com/question/10348200
#SPJ11
What multiplication equattion can be used to explain the solution to 15 / 1/3
Step-by-step explanation:
15 / (1/3) is equal to 15 x 3/1 = 15 x 3 = 45
We wish to calculate the coefficient of performance for our household refrigerator, which uses a new, low-toxicity refrigerant. The enthalpy of the refrigerant is 275.1 kJ/kg prior to entering the evaporator, 899.9 kJ/kg prior to entering the compressor, 1542.2 kJ/kg prior to entering the condenser, and 1768.2 kJ/kg prior to entering the throttling valve. As the coefficient of performance is dimensionless, report only your numerical answer.
The coefficient of performance (COP) for the household refrigerator using the new low-toxicity refrigerant can be calculated using the given enthalpy values. The COP is a dimensionless quantity and represents the efficiency of the refrigerator.
The formula to calculate COP is:
COP = (enthalpy at evaporator - enthalpy at throttling valve) / (enthalpy at compressor - enthalpy at evaporator)
Plugging in the given values:
COP = (275.1 kJ/kg - 1768.2 kJ/kg) / (899.9 kJ/kg - 275.1 kJ/kg)
Calculating the numerator and denominator:
COP = -1493.1 kJ/kg / 624.8 kJ/kg
Simplifying the expression:
COP = -2.39
The coefficient of performance for the refrigerator is -2.39.
To calculate the COP, we use the difference in enthalpy between different points in the refrigeration cycle. The enthalpy at the evaporator (275.1 kJ/kg) is subtracted from the enthalpy at the throttling valve (1768.2 kJ/kg) to obtain the numerator. Similarly, the enthalpy at the compressor (899.9 kJ/kg) is subtracted from the enthalpy at the evaporator to obtain the denominator. Dividing the numerator by the denominator gives us the COP. In this case, the COP is -2.39, indicating that the refrigerator is not operating efficiently.
Know more about coefficient of performance here:
https://brainly.com/question/28175149
#SPJ11
The specific death constant of a new strain of Bacillus subtilis was determined to be 0.012 min* at 85 °C and 1.60 min at 110°C Determine the activation energy for the thermal death of 8. subtilise A: 223 k moi
The activation energy for the thermal death of Bacillus subtilis is approximately 223,000 J/mol.
The activation energy for the thermal death of a strain of Bacillus subtilis can be determined using the Arrhenius equation. The equation is given by:
k = A * exp(-Ea / (R * T))
Where:
- k is the specific death constant,
- A is the pre-exponential factor,
- Ea is the activation energy,
- R is the gas constant (8.314 J/(mol*K)),
- T is the temperature in Kelvin.
To determine the activation energy, we need to use the given data for two different temperatures (85°C and 110°C) and their corresponding specific death constants (0.012 min^-1 and 1.60 min^-1).
Let's convert the temperatures from Celsius to Kelvin:
- 85°C + 273.15 = 358.15 K
- 110°C + 273.15 = 383.15 K
Now we can use the Arrhenius equation to set up two equations using the given data points:
For 85°C:
0.012 = A * exp(-Ea / (8.314 * 358.15))
For 110°C:
1.60 = A * exp(-Ea / (8.314 * 383.15))
By dividing the second equation by the first equation, we can eliminate the pre-exponential factor (A):
(1.60 / 0.012) = exp(-Ea / (8.314 * 383.15)) / exp(-Ea / (8.314 * 358.15))
133.33 = exp((8.314 * 358.15 - 8.314 * 383.15) / (8.314 * 358.15 * 383.15))
Taking the natural logarithm (ln) of both sides:
ln(133.33) = (8.314 * 358.15 - 8.314 * 383.15) / (8.314 * 358.15 * 383.15)
Simplifying the right side:
ln(133.33) = -Ea / (8.314 * 358.15 * 383.15)
Solving for Ea:
Ea = -ln(133.33) * (8.314 * 358.15 * 383.15)
Calculating Ea:
Ea ≈ 223,000 J/mol
Therefore, the activation energy for the thermal death of Bacillus subtilis is approximately 223,000 J/mol.
Know more about activation energy here:
https://brainly.com/question/28384644
#SPJ11
b) Calculate the Ligand Field Stabilization Energy (LFSE) for the following compounds: (i) [Mn(CN)4. )]^2
The Ligand Field Stabilization Energy (LFSE) for the compound [Mn(CN)4]^2- is -0.4 * (n * P) - 0.6 * (n * Δo).
To calculate the LFSE, we consider the electronic configuration of the metal ion (Mn2+) and the ligands (CN-) and use the following formula:
LFSE = -0.4 * (n * P) - 0.6 * (n * Δo)
In this case:
- The central metal ion is Mn2+, which has a d5 electronic configuration.
- The ligands are cyanide ions (CN-), which are strong-field ligands.
Since we don't have the specific values for the pairing energy (P) and the crystal field splitting parameter (Δo), it is not possible to calculate the exact LFSE for this compound without further information.
Learn more about Stabilization Energy visit
https://brainly.com/question/29389010
#SPJ11