Answer:
105000km
Explanation:
Given parameters:
Speed of shuttle = 21000km/hr
Time of travel = 5hrs
Unknown:
The distance covered by the space shuttle;
Solution:
Distance is the length of the path traveled.
Distance = speed x time
Input the parameters and solve;
Distance = 21000km/hr x 5hrs
Distance = 105000km
a pulling force carried by a rope is called what
Answer:
The pulling force that acts along a stretched flexible connector, such as a rope or cable, is called tension, T. When a rope supports the weight of an object that is at rest, the tension in the rope is equal to the weight of the object: T = mg.
Explanation:
A group of tourists drives through a state park in Maine. While arguing about whether the animal they've just seen is an Elk or a Moose, a chipmunk darts across the park road. The driver, who was traveling 6.7 m/s through the park slams on their breaks and comes to a stop. If the car has an acceleration of -8.3 m/s2, how long does it take the car to stop?
Answer:
0.8 second
Explanation:
Given data
Speed v=6.7m/s
Deceleration = - 8.3m/s²
Initial velocity u= 0m/s
We can solve for the distance covered upon breaking the speed using the expression
v=u +at
6.7=0-(8.3)t
6.7=8.3t
Divide both sides by 8.3
6.7/8.3=t
t=6.7/8.3
t=0.8 second
4. Why do chemists use relative masses of atoms compared to a reference isotope rather than the
actual masses of the atoms?
a. The actual mass of an electron is very large compared to the actual mass of a proton.
b. The actual masses of atoms are very small and difficult to work with.
c. The number of subatomic particles in atoms of different elements varies.
d. The actual masses of protons, electrons, and neutrons are not known.
Answer:
B
Explanation:
Answer:
answer is B
Explanation:
took the test
What distance is required for a train to stop if its initial velocity is 23 m/s and its
deceleration is 0.25 m/s²? (Assume the train decelerates at a constant rate.)
-- The train starts at 23 m/s and slows down by 0.25 m/s every second.
So it'll take (23/0.25) = 92 seconds to stop.
-- Its average speed during that time will be (1/2)(23+0) = 11.5 m/s
-- Moving at an average speed of 11.5 m/s for 92 sec, the train will cover
(11.5 m/s) x (92 sec) = 1,058 meters .
The distance required for the train to travel before stopping is 1,058 m.
The given parameters;
initial velocity of the train, u = 23 m/s
deceleration of the train, a = 0.25 m/s
The distance traveled by the train is calculated as follows;
[tex]v^2 = u^2 -2as[/tex]
where;
v is the final velocity of the train
The final velocity of the train is zero when the train stops
[tex]v^2 = u^2 -2as\\\\0 = 23^2 - 2(0.25)s\\\\0.5s = 529\\\\s = \frac{529}{0.5} \\\\s = 1,058 \ m[/tex]
Thus, the distance required for the train to travel before stopping is 1,058 m.
Learn more here: https://brainly.com/question/23852683
Dos pilotos suicidas, que están inicialmente a una distancia de 500 m entre sí, deciden chocar directamente de frente arrancando ambos desde el reposo. Ambos autos pueden desarrollar una aceleración máxima constante de 15 m/s2 . Si el piloto A arranca un segundo antes que el piloto B, encuentra: a) la posición donde los autos chocan, medida a partir de la posición donde arranca el piloto A, y b) la rapidez relativa de la colisión (la rapidez de B con respecto a A justo antes de la colisión, ó viceversa).
Answer:
a) El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A es de aproximadamente 293,14 metros.
b) La velocidad del automóvil A, en relación con la velocidad del automóvil B, es de 15 m / s
Explanation:
Los parámetros del movimiento son;
La distancia entre ambos coches = 500 m
La aceleración de ambos coches = 15 m / s²
La dirección de movimiento de ambos coches = uno hacia el otro
La hora de inicio del conductor A = Un segundo antes de la hora de inicio del conductor B
Por lo tanto, de la ecuación de movimiento, tenemos;
s = u · t + 1/2 · a · t²
v² = u² + 2 · a · s
Dónde;
u = La velocidad inicial de los autos = 0 (los autos parten del reposo)
t = El tiempo de movimiento de una aceleración dada
a = La aceleración = 15 m / s²
s = La distancia recorrida en el tiempo t
Por lo tanto, para el controlador A, tenemos;
s₁ = 0 × (t + 1) + 1/2 × 15 × (t + 1) ² = 7.5 × (t + 1) ²
s₁ = 7.5 × (t + 1) ²
Para el conductor B, tenemos;
s₂ = 0 × t + 1/2 × 15 × t² = 7.5 × t²
s₂ = 7,5 × t²
Dado que ambos chocan a lo largo del camino de 500 m, tenemos;
s₁ + s₂ = 500 metros
∴ 7.5 × (t + 1) ² + 7.5 × t² = 500
∵ s₁ + s₂ = 7.5 × (t + 1) ² + 7.5 × t²
Lo que da;
15 · t² + 15 · t + 7.5 = 500
15 · t² + 15 · t - 492,5 = 0
Resolver usando la aplicación en línea da; t = -6,25181 o t = 5,25181
Dado que t es un número natural, tenemos el valor correcto para t = 5.25181 segundos
a) Por tanto, el punto de colisión de los dos coches desde donde parte el conductor del coche A es;
s₁ = 7.5 × (t + 1) ² = 7.5 × (5.25181 + 1) ² ≈ 293.14 metros
El punto de colisión de los dos automóviles desde donde parte el conductor del automóvil A ≈ 293,14 metros
b) La semilla de A en el punto de colisión se da de la siguiente manera
Velocidad, v₁ = u + a × (t + 1) = 0 + 15 × (5.25181 + 1) ≈ 93.78
v₁ ≈ 93,78 m / s
La semilla de B en el punto de colisión también se da de la siguiente manera
Velocidad, v = u + a × (t) = 0 + 15 × 5.25181 ≈ 78.78
v₁ ≈ 78,78 m / s
Por lo tanto, la velocidad del automóvil A, en relación con la velocidad del automóvil B, [tex]v_{relative}[/tex] se da como sigue;
= v₁ - v₂ = 93,78 m / s - 78,78 m / s = 15 m / s
la velocidad del automóvil A, relativa a la velocidad del automóvil B = 15 m/s.
Cody’s car accelerates from 0M/S 245 in/at Northwoods and 15 seconds what is the acceleration of the car
Answer:
3m/s^2
Explanation:
Acceleration is change in velocity / time = 45/15 = 3m/s^2
if two objects are repelled from each other which force most likely caused this?
A. gravitational
B. weak nuclear
C. electromagnetic
D. strong nuclear
Answer:
it's C! electromagnetic
Explanation:
explain how the air balloon moves up and down.
Explain in terms of density
Answer:
hope it helps ....
Explanation:
The inside air that has been heated rises due to the difference of density between the hot and cold air particles. The heated air, the air that is inside the balloon, is less dense than the cool air, the air outside of the balloon. ... You can see that the bigger the volume gets, the smaller the density is.
When do we use Aerobic respiration & anaerobic respiration?
Answer:
the process by which organisms use oxygen to turn fuel, such as fats and sugars, into chemical energy. anaerobic respiration does not use oxygen. Respiration is used by all cells to turn fuel into energy that can be used to power cellular processes.
Which force is involved in kicking a ball?
1. Frictional force
2. Pushing force
Answer:
Pushing force
Explanation:
You technically push a ball when kicking it.
Plz help meeeeeeeeeeeeeeeeeee ahhhhhhhhh ❤️
Answer:
option 4
Explanation:
i just saw it from google
Why do oil tankers sit lower in water
When a lower tank is damaged, the incoming sea water pushes the oil in the damaged tank up into the ballast tank. Because of the hydrostatic pressure, there is an automatic transfer out of the damaged tank. The double-hull design is aimed at the probability of zero outflow.
m1=200g m2=150g
find the acceleration
the track is horizontal and frictionless
Answer:
50 or 1.3333
Explanation: Explanation you cancel out the mass and the force to see what your acceleration would be or you could divide F by M
HEY CAN ANYONE PLS ANSWER DIS IN YOUR OWN WORDS!!!
Answer:
11. A small number of alpha particles being deflected at large angles suggested that there is a concentration of positive charge in the atom
12. describes properties of the atom
13. 1913
14. quantum state with all observable (atoms) independent of time.
15. the lowest energy state of an atom or other particle
Explanation:
Who am I answer key
Answer:
huh
Explanation:
star a is composed of 60% hydrogen and star b has 54% hydrogen. which star is older and why
Answer: hello I think I'm in your class..
Explanation:
Mr. juhl is my teacher and he pit this on a test.
I'm Lennox
The radius of Mars is 3.4 x 10^6m and the period of Mars's rotation is 24 hours. What is the radial accelerations (in m/s^2) of an object on the ground at its equator?
A. 0.018m/s^2
B. 0.136m/s^2
C. 0.068m/s^2
D. 0.376m/s^2
Answer:
Option A: 0.018m/s^2
Explanation:
Formula for radial acceleration is;
α_r = ω²r
Now, ω = 2π/T
We're given T = 24 hours. Converting to seconds is; T = 24 × 60 × 60 seconds
ω = 2π/(24 × 60 × 60)
We are given radius = 3.4 × 10^(6) m
Thus;
α_r = (2π/(24 × 60 × 60))² × 3.4 × 10^(6)
α_r = 0.018 m/s²
A stone dropped from the top of a building strikes the ground in 4.2 s. How tall is the building? Someone explain please!
Answer:
well i'm not sure if which unit of measure you need but i think its 86.49 meters tall.
Light is produced by which fundamental force?
strong nuclear
electromagnetic
weak nuclear
gravitational
Answer:
ans: Electromagnetic
Answer:
B on edg.
Explanation:
16. True/False: Protons are exchanged between objects by induction
please can i have help with this question
The amount of matter in a substance or object is called:
??? What the answer
Answer:
mass!!
Explanation:
Which words help you to determine the meaning of the word decelerate in paragraph 3
Answer:
the words
Explanation:
Answer:
Pressing the brake pedal
Explanation:
Decelerate sounds a lot like the word accelerate, but we know that the speed is decreasing, so it would have to be going down, getting slower, so whichever sounds like a good example of speed decreasing should be a good answer!
a car ends up at x = -245 m after a displacement of -103 m. what was its initial position?
Answer:
-142m
Explanation:
To find the initial position of the car, we can add the displacement.
-245 + 103 = -142
Best of Luck!
A force of 75 N at an angle of 15° to the direction of motion moves a chair 3 m. Which change would result in more work being done on the chair?
Answer:
Decreasing the angle to 10
Explanation:
Edge 2020
Which of the following solar oven design materials would serve to conduct heat to maximize thermal energy in the s'more?
1. metal platform
2. foil on the exterior flap
3. layers of cotton lining the interior
4. white paper lining the interior
Answer:
The correct option is;
3. layers of cotton lining the interior
Explanation:
In the procedure for making a solar oven it is essential place the inside portion of the carboard flap be made that the air made hot by the heat of the Sun does is not removed from the oven as convection current, and to provide insulation that limits heat loss by thermal radiation as well as conduction to cooler surfaces.
Answer:
^
Explanation:
Which has more inertia, a car with a mass of 900kg or a car with a mass of 1,500kg. Explain your answer.
Answer:
Which has more inertia - a car with a mass of 900kg or a car with a mass of 1500kg - explain. The bigger the mass - the larger the inertia but you need to exert more force to start the movement.
Explanation:
3. Mount Everest, an eastern Himalayan peak on the Tibet-Nepal border, was discovered to be the world's highest mountain in March 1856. The Survey Department of the Government of India computed its height to be 29,002 ft. Express this height in scientific notation.
Answer:
h = 2,9002 10⁴ ft
Explanation:
Scientific notation is a method to write very large and small numbers clearly, the figure is written with an integer and the other figures in decimals, with an exponent so that the number does not change.
If it is necessary to approximate a figure, the criterion is if the next figure is greater than or equal to five, the figure rises by one unit.
Mount Everest height
h = 29002 ft
h = 2,9002 10⁴ ft
if we approximate three significant figures that
h = 2.90 10⁴ ft
Answer:
[tex]2.9002 \cdot 10^{4} ft[/tex]
Explanation:
To express the height 29,002 in scientific notation we need to move the decimal point four places to the left and express the answer into a base-ten power, as follows:
[tex]29,002 = 2.9002 \cdot 10^{4}[/tex]
The answer expressed in scientific notation results in 2.9002 times a ten to the fourth power, as a result of the four movements of the decimal point.
I hope it helps you!
HELLO! Please Help me.
I can't do it! it's Science
Answer:
9V
Explanation:
V=IR
V=2.5*3.6
V=9
Answer:
9V
Explanation:
V =IR
V =2.5 * 3.6
V = 9V
The gradual change in a species over time is called
a.
mutation.
b.
evolution.
c.
migration.
d.
variation.
PLZ HURRY WILL GIVE BRAINLIEST
Answer: B. Evolution
Explanation:
As species grow older over time they will gradually evolve through natural selection and evolution.
The gradual change in a species over time is known as evolution (b).
The process of evolution occurs through several mechanisms, including mutation, migration, and natural selection.
Mutation (a) is the spontaneous change in the genetic material of an organism. These changes can result in new traits that may be advantageous, disadvantageous, or neutral for survival. When mutations occur, they can introduce genetic variation within a population, which serves as the raw material for evolution.
Natural selection is a crucial factor driving evolution. Individuals with advantageous traits that better suit their environment are more likely to survive and reproduce, passing on these advantageous traits to their offspring. Over generations, the frequency of beneficial traits increases in the population, leading to the adaptation and evolution of the species.
Variation (d) encompasses the differences in physical traits and genetic makeup among individuals within a population. This variation is essential for evolution to occur since it provides the raw material for natural selection to act upon.
To know more about species here
https://brainly.com/question/9506161
#SPJ6