A small car and a semi-truck have the same total mechanical energy. Which if the following cannot be true?

A Small Car And A Semi-truck Have The Same Total Mechanical Energy. Which If The Following Cannot Be

Answers

Answer 1
The answer that makes most sense is D. Hope this helps
Answer 2

The car is going the same speed as the truck and the truck and car are at the same height can not be true. Therefore, option (B) is correct.

What is mechanical energy?

Mechanical energy can be defined as the sum of potential energy and kinetic energy that is used to do work. Mechanical energy defines the energy of a body because of its position or motion.

The total mechanical energy can be considered conserved when the forces doing work are conservative in nature. The energy changes between different kinds of potential energy and kinetic energy but the total energy of the system remain constant.

Kinetic energy and the potential energy of the car and the semi-truck will depend on the masses of the objects. The semi-truck must have a greater mass than the car. Therefore, the car and the semi-truck must have different values of speed and height if they have the same total mechanical energy.

Learn more about mechanical energy, here:

brainly.com/question/13552918

#SPJ2


Related Questions

A 2 kg book falls from a 1.5 m high shelf. What will the kinetic energy of the book be as it hits the
floor?
What is the velocity of the book from the first question as it hits the floor?

Answers

The kinetic energy of the book be as it hits the floor is - 29.4  kg(m²/s²)   and the velocity of the book as it hits the floor is   -5.422 m/s .

How is the kinetic energy calculated ?

From the question we can get,

mass (m) = 2 kg

height (h) = 1.5 m

we know ,

P.E = mgh

∴ g =9.8 m/s

∴ P.E = 2 × 9.8 × 1.5

∴ P.E = 29.4 kg(m²/s²)

According to the law of conservation of energy, energy cannot be destroyed but can only be converted from one form to another. Because KE and PE are interconvertible, they do not violate the law of conservation of energy.

∴Total Energy = PE + KE

Because the total energy of the system will remain constant, total energy=0

∴ PE+KE=0

It means that

∴PE=-KE

Hence, the kinetic energy is - 29.4   kg(m²/s²)

How to calculate velocity ?

We know,

K.E = 1/2 (mv² )

∴ -29.4  = 1/2 ( 2 × v²)

∴ -29.4 = v²

∴ v = √-29.4

∴ v =  -5.422 m/s

Hence velocity of book is  -5.422 m/s.

What is kinetic energy ?

An object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a certain velocity. The body retains its kinetic energy after gaining it during acceleration until its speed changes.

Can learn more about kinetic energy from https://brainly.com/question/114210

#SPJ1

use newton's second law of motion to calculate the acceleration of a 7 kg mass if a force of 68.6 n acts on it?

Answers

The acceleration of the object is 9.8 m/s^2.

What is acceleration?

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

Given parameters:

Mass of the object: m = 7 kg.

Force acting on it: F = 68.6 N.

Hence, according to Newton's 2nd law of motion:

Force = mass × acceleration

acceleration = force/mass

= 68.6 N/7kg

= 9.8 m/s^2.

Hence, acceleration of the object is 9.8 m/s^2.

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ1

What are some of the differences between a gravitational force and a magnetic force?

Answers

A gravitational force is always attractive in nature and a magnetic force is attractive in nature between two opposite poles and repulsive in nature between two same pole.

What are  the differences between a gravity and a magnetism?

Gravity and magnetism are not the same thing. These two ideas or expressions are entirely dissimilar from one another. Despite the fact that both are regarded as forces, they are two distinct forces with various traits and features.

First of all, gravity works between two objects regardless of their composition because it is a separate force. There will be gravitational forces between the items as long as they have mass. Any two things will be drawn toward one another by gravity or another gravitational force if they have mass.

Magnetism, on the other hand, mostly depends on the unique characteristics of the object. There are two directions for the magnetic force. It has the power to draw things together as well as away from one another. The orientation of the electrons inside the items also affects how magnetism behaves. With gravity and gravitational force, this is not the case.

Learn more about gravitational force here:

https://brainly.com/question/12528243

#SPJ1

Im not sure but if your teacher asked you why are you interested in dawn (sunrise) what would you say?

Answers

It’s calming and just so peaceful and I I go on the beach and watch it so it’s more nicer

Answer:

Because it's beautiful and very interesting. It shows the start of a new day. Why not be interested in it?

Explanation:

if the radius of the cd below is 6.0 cm and the angular velocity is 5.0 rad/s, what is its angular displacement in 2.0 s? AND linear displacement

Answers

Angular displacement: 10 rad.

linear displacement: 60 cm

What is angular velocity?

In basic terms, angular velocity is the pace at which an item rotates or circles around an axis in time. "ω" is a Greek letter that stands in for angular velocity. Radians per second is the SI unit for angular velocity since it is expressed as an angle per unit of time.

Given that,

Radius of the CD below is 6.0 cm

Angular velocity is 5.0 rad/s.

As we know, angular displacement, (θ) = ω × t

or, θ = 5.0 rad/s × 2.0 sec

or, θ = 10 rad.

Next, linear displacement, (S) = R × θ

or, S = 6 cm. × 10 rad

or, S = 60 cm

To know more about angular displacement refer to:

https://brainly.com/question/13665036

#SPJ1

a conducting wire is quadrupled in length and tripled in diameter. part a part complete does its resistance increase, decrease, or stay the same? does its resistance increase, decrease, or stay the same? increase decrease stay the same previous answers completed part b by what factor does its resistance change?

Answers

The resistance decreases when the conducting wire is quadrupled in length and tripled in diameter.

The electrical resistance of a circuit component or tool is defined as the ratio of the voltage applied to the electric present day which flows thru it: If the resistance is consistent over a widespread variety of voltage, then Ohm's regulation, I = V/R, may be used to predict the behavior of the fabric.

An less difficult way to explain resistance is to don't forget an example of someone in a crowded marketplace struggling to go from one keep to every other. This situation is in reality similar to an electron looking to make its way thru a wire.

If the temperature and different bodily variables stay constant, the resistance of a conductor is exactly proportional to its period.

Learn more about resistance here:- https://brainly.com/question/17563681

#SPJ4

An inclined plane has an angle of inclination of 20 degrees from the horizontal. What time will it take for a cart to travel 1.5 m across the inclined plane if it starts from rest at the top of said inclined plane. Assume the system is frictionless.

Answers

The  time taken to travel 1.5 m across the inclined plane if it starts from rest at the top be 0.95second.

What is inclined plane?

An inclined plane, sometimes referred to as a ramp, is a flat supporting surface that is tilted at an angle and used to help raise or lower a weight with one end higher than the other.

One of the six traditional simple devices that Renaissance scientists defined is the inclined plane. Heavy weights are transported over vertical obstacles using inclined planes. Examples include a ramp used to load cargo onto a truck, a pedestrian ascending a ramp, an automobile ascending a grade, and a train ascending a gradient.

Given that:

angle of inclination = 20°.

Length of the inclined plane = 1.5 m.

Acceleration along the inclined plane = g sin20° =

Hence, time taken to travel 1.5 m across the inclined plane if it starts from rest at the top = √(2l/gsinθ = √(2×1.5/9.8sin20°) second = 0.95second.

Learn more about inclined plane here:

https://brainly.com/question/14983337

#SPJ1

A 150g baseball rolls with exact same velocity as a 300 g soccer ball, how much more momentum does the soccer ball have?

Answers

Answer:

The momentum of the soccer ball will be twice that of the baseball.

Explanation:

If an object of mass [tex]m[/tex] travels with a velocity of [tex]v[/tex], the momentum [tex]p[/tex] of that object will be [tex]p = m\, v[/tex]. Thus, if velocity is fixed, momentum will be portional to the mass of the object.

The mass of the soccer ball is twice that of the baseball: [tex](300 / 150) = 2[/tex]. Thus, when moving at the same velocity, momentum of the soccer ball will be twice that of the baseball.

write the relationship between the phasor voltage and phasor current for an inductance.

Answers

The relationship between the phasor voltage and phasor current for inductance is  V=Z*I

What is inductance?

According to its definition, it is the amount of electric current that varies at a rate of one ampere per second, producing an electromotive force of one volt across the inductor. Inductance is measured using the SI unit Henry, abbreviated as "H."

What are current and voltage?

Current in the circuit flows due to voltage, which is the potential difference between two locations in an electric field. The term "current" refers to the rate at which electrons are moving. Current is a result of voltage (being an effect). Voltage has an effect on the current.

To know more about inductance visit:

https://brainly.com/question/18575018

#SPJ4

(ii) calculate the acceleration due to gravity on the moon, which has radius 1.74 * 106 m and mass 7.35 * 1022 kg.

Answers

The acceleration due to gravity on the moon ,which has the radius 1.74×10⁶ m and mass 7.35×10²² Kg is   1.63 m/s²  .

The Acceleration due to gravity is defined as the acceleration of the freely falling bodies due to force of attraction of other body .

it is given that , the radius of the moon is(R) = 1.74×10⁶ m ;

the mass of the moon is(M) = 7.35×10²² Kg ;

we know that the gravitational constant is = 6.67×10⁻¹¹ Nm²/Kg² ;

the formula is :

g = GM/R²

g = (6.67×10⁻¹¹)(7.35×10²²)/(1.74×10⁶)²

g = 4.90×10¹²/3×10¹²

g = 1.63 m/s²

Therefore , the acceleration due to gravity on the moon is 1.63 m/s²  .

Learn more about Acceleration Due To Gravity here

https://brainly.com/question/8127474

#SPJ4

Marissa does 11.1 J of work to lower her window shade in her bedroom in 7 seconds. How powerful is Marissa?

Answers

Marissa does 11.1J of work in 7 seconds.

We know that, the expression of power,

P= W/t

Here, W is the work done and t is the time.

Substitute the required values to determine the value of the power of Marissa.

work done= 11.1 J

time taken = 7 seconds

Power = 11.1 / 7

Power = 1.58 W

Hence, Marissa is 1.58 W is powerful

For more information on power,

https://brainly.com/question/11380506

Why is it more difficult to push a sofa across a room with carpet than a room with a wood floor?.

Answers

Answer:

because the carpet creates more friction when sliding across which makes it slower while the slickness of the wood makes less friction

Why might a wine glass survive a fall onto a carpeted floor but not onto a concrete floor?.

Answers

Since the carpet is softer than the concrete and the force of impact is reduced by the extended time of impact.

true or false: when we observe the cmb light we are seeing back in time (farther away) than quasars -- the farthest galaxies we can see.

Answers

The statement "when we observe the CMB light we are seeing back in time (farther away) than quasars -- the farthest galaxies we can see" is true.

What is the CMB light?

The Cosmic Microwаve Bаckground, or CMB, is rаdiаtion thаt fills the universe аnd cаn be detected in every direction. The furthest light we cаn see is the CMB, which is the light left over from the Big Bаng, forming аt just 380,000 yeаrs аfter our cosmic birth.

The CMB light is the furthest back in time that we have seen, and we cannot see light from earlier times because that light was scattered and the universe was opaque. So, CMB cаrries informаtion аbout the very eаrly universe.

For more information about the CMB light refer to the link:

https://brainly.com/question/23317990

#SPJ4

what evidence supports the model of jupiter's galilean satellites forming in a mini accretion disk around jupiter?

Answers

The mass trend that among four moons is highest close to Jupiter and decreases with distance, with the inner circular members of this group being slightly lesser than the two end moons.

What are the uses of satellites?

There are several satellites in operation. They are used for a number of purposes, including as the weather forecasting, amateur radio, television broadcasting, and the Global Positioning System. They use telescopes to look out at the planetary system in order to do research and collect data.

How many satellites currently exist in orbit?

According to UNOOSA statistics from the Concerned Scientists, there are 8,261 satellites orbiting Earth as of December 2022, although only 4,852 among them are currently in use.

To know more about satellites visit:

https://brainly.com/question/10846004

#SPJ4

thermonuclear runaway on the surface of a white dwarf due to accretion of matter from a companion star is called

Answers

A nuclear runaway on the edge of a White Dwarf (WD), which is absorbing matter from a partner star in a tight binary system, causes a classical nova eruption.

Has a thermonuclear bomb been used?

The nuclear bomb, which the United States dropped in Japan in the Second World War and killed thousands of individuals, is already very powerful, but experts claim that a hydrogen bomb, which has never been used battle by any country, has the potential to destroy city and kill considerably more people.

What distinguishes nuclear energy from thermonuclear energy?

Since a thermonuclear weapon makes use of the energy generated when two light protons and neutrons fuse together to make a heavier nucleus, it fundamentally differs from an atomic bomb. In contrast, the energy produced when a heavy alpha particle divides, or fissions, becoming two lighter nuclei is used in an atomic bomb.

To know more about Thermonuclear visit:

https://brainly.com/question/12933041

#SPJ4

at time t=0, a projectile is launched from the top of a cliff at an angle of 30 degrees below the horizontal. Which of the following pairs of graphs best represents the horizontal displacement triangle x and the vertical velocity component Vvert of the projectile as a function of time t?

Answers

Answer:

At time t=0 , Projectile is launched from the top of cliff an angle of 30

Explanation:

45-443tx=332

Crates of masses 1 kg , 4 kg , and 6 kg are placed in a line on a frictionless table. They remain in contact as they are pushed by a 60 N force applied to the 1 kg block.

A) What is the magnitude of the force that the 4 kg block deals to the 6 kg block?
B) What is the magnitude of the force dealt by the 4 kg block on the 1 kg block?

Answers

Answer:

Approximately [tex]33\; {\rm m\cdot s^{-2}}[/tex].

Approximately [tex]55\; {\rm m\cdot s^{-2}}[/tex].

(Assume that the table is level, and that the [tex]60\; {\rm N}[/tex] force is horizontal.)

Explanation:

Consider all three blocks as one object of mass [tex]m = (1 + 4 + 6)\; {\rm kg} = 11\; {\rm kg}[/tex]. Among all the forces that are in action, the only unbalanced external force on this [tex]m = 11\; {\rm kg}[/tex] object will be the [tex]60\; {\rm N}[/tex] force. Hence, the resultant force of this combined object of mass [tex]m = 11\; {\rm kg}[/tex] will be [tex]F_{\text{net}} = 60\; {\rm N}[/tex].

Acceleration [tex]a[/tex] of this combined object will be:
[tex]\begin{aligned}a &= \frac{F_{\text{net}}}{m} \\ &= \frac{60\; {\rm N}}{11\; {\rm kg}} \\ &= \frac{60}{11}\; {\rm m\cdot s^{-2}}\end{aligned}[/tex].

Since the three crate blocks are moving together, each will have the same acceleration, [tex]a = (60/11)\; {\rm m\cdot s^{-2}}[/tex].

Resultant force on each of the crate blocks will be:

[tex]1\; {\rm kg}[/tex] crate: [tex]F_{\text{net}} = m\, a = (1\; {\rm kg})\, (60/11\; {\rm m\cdot s^{-2}}) = (60/11)\; {\rm N}[/tex].[tex]4\; {\rm kg}[/tex] crate: [tex]F_{\text{net}} = m\, a = (4\; {\rm kg})\, (60/11\; {\rm m\cdot s^{-2}}) = (240/11)\; {\rm N}[/tex].[tex]6\; {\rm kg}[/tex] crate: [tex]F_{\text{net}} = m\, a = (6\; {\rm kg})\, (60/11\; {\rm m\cdot s^{-2}}) = (360/11)\; {\rm N}[/tex].

Assume that the [tex]60\; {\rm N}[/tex] external force on the [tex]1\; {\rm kg}[/tex] block points to the right.

When the crates are considered individually, external forces on the [tex]1\; {\rm kg}[/tex] crate will include:

the [tex]60\; {\rm N}[/tex] external force to the right, anda normal force the [tex]4\; {\rm kg}[/tex] block exerts on the [tex]1\; {\rm kg}[/tex] block (to the left.) Assume that this force is of magnitude [tex]x\; {\rm N}[/tex].(In the vertical direction, the weight of this block and the upward normal force from the table are balanced.)

Since these two forces are in opposite directions, the resultant force on this [tex]1\; {\rm kg}[/tex] block will be [tex](60\; {\rm N} - x\; {\rm N})[/tex]. However, since the actual resultant force on this block (calculated from acceleration) is [tex](60 / 11)\; {\rm N}[/tex]:

[tex]\displaystyle 60\; {\rm N} - x\; {\rm N} = \frac{60}{11}\; {\rm N}[/tex].

Therefore, the force that the [tex]4\; {\rm kg}[/tex] block exerts on the [tex]1\; {\rm kg}[/tex] block will be

[tex]\displaystyle 60\; {\rm N} - \frac{60}{11}\; {\rm N} = \frac{600}{11}\; {\rm N} \approx 55\; {\rm N}[/tex].

When considered individually, the only unbalanced external force on the [tex]m = 6\; {\rm kg}[/tex] block is the normal force from the [tex]4\; {\rm kg}[/tex] block. Hence, this force will be equal to the resultant force on the [tex]m = 6\; {\rm kg}[/tex] block, [tex](360 / 11)\; {\rm N} \approx 33\; {\rm N}[/tex].


Why are graphs helpful for displaying data?
OA. They do not use numerical information.
B. They are the only way to display data..
C. They are easier to make than tables.
D. They help you identify patterns in the data.

Answers

The graphs  are helpful for displaying data because  they help you identify patterns in the data. Option (D) is correct.

What is graph?

A graph is a structure that resembles a set of items in discrete mathematics, more specifically in graph theory, in which some pairs of the objects are conceptually "connected." The items are represented by mathematical abstractions known as vertices (sometimes known as nodes or points), and each pair of connected vertices is known as an edge (also called link or line).

A graph is typically shown diagrammatically as a collection of dots or circles representing the vertices and lines or curves representing the edges. One of the topics studied in discrete mathematics is graphs.

Learn more about graph here:

https://brainly.com/question/17267403

#SPJ1

suppose that the bike rider in problem 15 pedaled up the hill and never came to a stop. in what system is energy conserved? from what form of energy did the bike gain mechanical energy?

Answers

The system in which the energy is conserved in Isolated system.

The bike gain mechanical energy from heat energy (friction force).

What is law of conservation of energy?

The law of conservation of energy states that energy can neither be created nor destroyed but can be converted from one form to another.

The system must be isolated for the mechanical anergy to conserved. During the energy conservation, the kinetic energy of the bike from the ground level is converted into potential energy at the maximum height.

Mathematically, the formula for this energy conservation is written as;

Δ K.E = Δ P.E

where;

Δ K.E is change in kinetic energy of the bikeΔ P.E is change in potential energy of the bike

Learn more about conservation of energy here: https://brainly.com/question/27422874

#SPJ1

For a projectile's Vertical Motion: the total hang time is twice the time it takes the projectile to reach Vtop.
O True
O False

Answers

Answer:

false, because the two are the exact same, at least in time


A 1 kg block is traveling to the right at a speed of 5 m/s. A 2 kg block is traveling to the left at 1 m/s. If the two blocks collide
and stick together, what is their combined speed?

Answers

Answer:

1 m/s

Explanation:

According to the law of conservation of momentum:

[tex]m_{1} u_{1} +m_{2} u_{2} =(m_{1} +m_{2} )v[/tex]

We take right to be the positive direction (meaning we put minus in front of the velocity of the block which is travelling to the left):

1 kg * 5 m/s - 2 kg * 1 m/s = (1 kg + 2 kg) * v

5 kgm/s - 2 kgm/s = 3kg * v

3 kgm/s = 3 kg * v

v = 1 m/s

Is the force of friction related to the weight of the shoe? Explain

Answers

Since the force is higher and the downward force is greater, the friction increases as the force increases. Consequently, the object. So the weight does affect the friction on the shoe.

an electric motor, with an input power of 250 w, produces 200 w of mechanical power. the efficiency of the motor is

Answers

The Efficiency of an electric motor is 80%.

The portion of electrical energy that is not converted into mechanical power is converted to heat, which is largely useless. Assuming no transmission losses happen, as an illustration: For every killowatt of shaft power it produces, a motor with an efficiency of 80% will use 1/0.8=1.25 kW of electrical power.If a motor is 95% efficient, it will only require 1/0.95=1.05 kW to produce 1 kW of shaft work.Even though electric motor use can account for up to 66 percent of the energy costs in the processing of polymers, this is frequently overlooked. When energy is taken into account, the motors in the primary processing machinery, such as injection moulders and extruders, are obvious, but the majority of motors are "hidden" in other machinery, such as compressors, pumps, and fans.The motor's efficiency is defined as the net ratio of input to output mechanical power. Motor efficiency will never be greater than or equal to 100 percent. Efficiency (percent) = Output Power * 100 / Input Power.

Efficiency=output work/dW

=200/250%

=80%

To know further about Efficiency of an electric motor -

https://brainly.com/question/10100576

#SPJ4

The density of aluminum is 2. 70 g/cm3, a piece of aluminum is 244 g, what is the volume?.

Answers

Aluminum does have a density if 2.70 g/cm3 and a volume of 90.37 mL. A piece from aluminum weighs 244 g.

What is density and example?

A block of the tougher, lighter element gold (Au), for example, will have a higher density than just a block of the heavy element lead (Pb) (Au). Bricks are more dense than Styrofoam blocks. Its meaning is mass per unit volume. To calculate a solid's volume, take its measurements, or use a measuring jug to calculate a liquid's volume. By putting the item or material on a scale, you may determine its mass. Divide the volume by the mass to determine the density.

Briefing:

The formula may be used to determine a substance's volume given its mass and density.

                 volume=mass/density

Considering the query we have,

                 volume=244/2.70

                  volume=90.37

To know more about density visit:

brainly.com/question/14441268

#SPJ4

Pls help me with a physics question I am struggling

Answers

Answer:

It will condese to 47

Explanation:

As per as the table chart , Substance G melting point at 47 and boiling point at 120 so AS per as the chart

a stalled car is being pushed up a hill with increasing velocity by three people. the net force on the car must be

Answers

Three persons are pushing a stopped automobile up a hill at an increasing speed, hence the net force exerted on the car has to be zero.

Is what velocity, for example in the case?

The speed at which anything goes along a certain path is referred to as its velocity. as fast as a car traveling north on a highway, even, or as fast as a rocket taking off. The velocity vector's absolute amount has always been equal to the motion's speed since it is a scalar.

Can velocity change direction?

The pace at which an object's position varies over time is referred to as its velocity (displacement). Speed can only be beneficial, unlike velocity, which includes combined speed and direction, which may be neither favourable or negative.

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

an induced current flows clockwise as the metal bar is pushed to the right. the magnetic field points

Answers

The magnetic field will point in anticlockwise direction

What is Fleming's right hand rule?

Fleming's right hand rule states that If the thumb shows the direction of motion, index finger shows the direction of the magnetic field and middle finger are held mutually perpendicular, then middle finger gives the direction of induced emf/current in the wire.

Fleming's right hand rule is used to determine the direction of an induced current in a coil.

Since the magnetic field and the induced current move in opposite directions, then if the induced current flows clockwise, the magnetic field will move in anticlockwise direction

learn more about Fleming's right hand rule from

https://brainly.com/question/956563

#SPJ1

What is the magnitude of force A,B

Answers

The magnitude of force A is -50N and for the B is 200N

What is magnitude?

Magnitude is a measure of the size or intensity of something. It is usually the size of a physical quantity, such as a force, or an earthquake. It can also be used to refer to the degree of importance or intensity of an emotion, feeling or event. Magnitude is often expressed as a numerical value on a logarithmic scale. This scale is used to compare different physical quantities or events, such as the intensity of an earthquake or the power of a solar flare. Magnitude can also be used to describe the size, brightness or importance of an object, such as a star or a planet.

To learn more about magnitude
https://brainly.com/question/24468862
#SPJ1

A roof has a surface area of 20000cm². If the atmospheric pressure exerted on the roof is 100000Pa, determine the force on it.(Take g=10N/kg)​

Answers

The force on the roof that has a surface area of 20000cm² with 100000Pa of pressure exerted is 5N.

How to calculate force?

Pressure is the amount of force that is applied over a given area divided by the size of this area.

The pressure of a substance can be calculated by using the following formula:

Pressure = Force × area

According to this question, a roof has a surface area of 20000cm². If the atmospheric pressure exerted on the roof is 100000Pa, the amount of force on the roof can be calculated as follows:

100000Pa = Force × 20,000cm²

20000F = 100000

F = 100,000 ÷ 20,000

F = 5N

Therefore, 5N is the force acting on the roof.

Learn more about force at: https://brainly.com/question/945436

#SPJ1

Other Questions
ryder loses her job because sales are slow at her firm, due to a general slowdown in the entire economy. this is an example of ____ unemployment. you are treating a patient who is exhibiting slurred speech, facial droop, and an inability to move his left arm. which neurologic examination tool emphasizes these possible stroke signs? If a member seems to lead the team and begins team meetings, which team role are they displaying?. I need help with this please i dont understand graph the function: f(x) = {x+1 if x Richard and Teo have a combined age of 28. Richard is 13 years older than twice Teos age. How old are Richard and Thiago? A group of friends wants to go to the amusement park. They have no more than $80 to spend on parking and admission. Parking is $14.75, and tickets cost $11.25 per person, including tax. Write and solve an inequality which can be used to determine xx, the number of people who can go to the amusement park. When a member of a limited liability company guarantees payment of a loan to the firm, the member is personally liable for the obligation.a. Trueb. False Case Study: Proposing Education Policy SolutionsProject: Opening Statementplease look at the image and help!!! Major geological and biological events of the past are used by scientists to describe the. An ecosystem is unlikely to be limited by the supply of _____ because it is obtained from the air. you are doing a biochemical analysis of molecules from cells from patients with a certain disease compared to cells from control patients who do not have the disease. you find that patients with the disease have unusually high levels of cytosine molecules with ch3 groups attached to their cells. which modification has taken place in the cells from the disease patients? Question 3 Multiple Choice Worth 10 points)(04.05 LC)DA hockey player made 88% of her goal attempts last season. The coach wants to estimate the number of goals the player will make out of 10 attempts in a game and decides torun a simulation. Which of the following could be a representation of the events for the simulation?O Assign the numbers 00-88 to represent a made goal and the numbers 89-99 to represent a missed goal.O Assign the numbers 1-9 to represent a made goal and the number 10 to represent a missed goal.O Assign the numbers 1-88 to represent a made goal and the numbers 89-100 to represent a missed goal.O Assign the numbers 0-8 to represent a made goal and the number 9 to represent a missed goal. the perimeter and the width of a rectangle are 64 m and 2 m, respectively. what is the area of the rectangle? Will warmer oceans be better or worse at absorbing CO2, and why?Please help, giving brainliest what caused the growth of regulatory agencies around the transition from the nineteenth to the twentieth century? John earns $22 per hour for a regular 40 hour work week. Any hours worked over 40 hours are paid at time and a half.What is John's gross pay if he worked 44 hour this week? i only need 8 someone pls im desperate i will mark you brainliest when i can How domodest orextremeenvironmentalchanges affectthe long-termstability of anecosystem? Can someone give me Spanish songs that talks about working out routines or exercising? For my spanish class