The null hypothesis (H0) assumes that the proportion of adults annoyed by television violence is equal to or greater than 0.5, while the alternative hypothesis (Ha) assumes that the proportion is less than 0.5.
In this case, the sample proportion is calculated as the number of adults indicating annoyance divided by the total sample size: 1,152/2,400 = 0.48.
Next, we can calculate the test statistic, which follows a standard normal distribution under the null hypothesis. The test statistic formula is z = (p - P) / sqrt(P(1-P)/n), where p is the sample proportion, P is the hypothesized proportion under the null hypothesis (0.5 in this case), and n is the sample size.
Using the given values, we can calculate the test statistic:
z = (0.48 - 0.5) / sqrt(0.5(1-0.5)/2400) ≈ -1.67.
Finally, we compare the test statistic to the critical value. At a significance level of 0.10, the critical value for a one-tailed test is approximately -1.28. Since the test statistic (-1.67) is smaller than the critical value, we reject the null hypothesis. This suggests that there is evidence to support the claim that less than half of all adults are annoyed by violence on television.
To learn more about alternative hypothesis (Ha), click here: brainly.com/question/27587716
#SPJ11
A donut has a diameter of 7 in. What is the radius?
Answer:
The radius is 3.5 inches I think.
Step-by-step explanation:
Hope this helped Mark BRAINLIEST!!!
Answer:
3.5
Step-by-step explanation:
You would simply divide 7 inches by 2 because the radius is one-half the measure of the diameter.
If an apple pie recipe calls for 3 pounds of candy apples then how many cups of canned apples required
Answer:
Seven cups of canned apples are required to make apple pie recipe
Step-by-step explanation:
The weight of one canned apple is 0.45 pounds
Weight of total canned apple required to make the apple pie recipe is 3 pounds.
Total number of cups of canned apples required
[tex]= \frac{3}{0.45} \\= \frac{300}{45} \\= \frac{20}{3} \\[/tex]
So approximately seven cups of canned apples are required to make apple pie recipe
Solve for x.
20
8
4x+3
38
Answer:
x = 18
Step-by-step explanation:
The "Angle Bisector" Theorem says that an angle bisector of a triangle will divide the opposite side into two segments that are proportional to the other two sides of the triangle.
So, 20/8 = (4x + 3)/30
8(4x + 3) = 20(30)
32x + 24 = 600
32x = 576
x = 18
O There were 9 bags of
candy donated for the
neighborhood party.
Each bag contained
245 pieces. How much
candy did they have
for the party?
a uniform solid disk of mass m = 2.91 kg and radius r = 0.200 m rotates about a fixed axis perpendicular to its face with angular frequency 5.94 rad/s.
A uniform solid disk with a mass of 2.91 kg and a radius of 0.200 m is rotating about a fixed axis perpendicular to its face with an angular frequency of 5.94 rad/s.
The angular frequency of an object rotating about a fixed axis represents the rate at which it completes one full revolution in radians per second. In this case, the disk has an angular frequency of 5.94 rad/s.
The moment of inertia of a uniform solid disk rotating about its axis can be calculated using the formula:
I = (1/2) * m * [tex]r^2[/tex]
where I is the moment of inertia, m is the mass of the disk, and r is the radius of the disk. Substituting the given values, we have:
I = (1/2) * 2.91 kg * [tex](0.200 m)^2[/tex]= 0.0582 kg·[tex]m^2[/tex]
The moment of inertia is a measure of an object's resistance to changes in rotational motion. In this case, the disk's moment of inertia is 0.0582 kg·[tex]m^2[/tex].
The angular frequency, moment of inertia, and mass of the disk are related by the equation:
I * ω = L
where ω is the angular frequency and L is the angular momentum. Rearranging the equation, we can solve for the angular momentum:
L = I * ω = 0.0582 kg·[tex]m^2[/tex] * 5.94 rad/s = 0.3456 kg·[tex]m^2[/tex]/s
Therefore, the angular momentum of the rotating disk is 0.3456 kg·[tex]m^2[/tex]/s.
Learn more about radians per second here:
https://brainly.com/question/29751103
#SPJ11
A child toy is made by removing a triangular prism from the center of a wooden rectangular prism The triangular base of the triangular prism has a base length of 1 inch and a height of 1 inch. Write and solve an equation to find the volume of the toy.
*see attachment for the diagram given
Answer:
Volume of the toy = 68 in.³
Step-by-step explanation:
The equation to find the volume of the toy = volume of the wooden rectangular prism - volume of the triangular prism removed form the center
Volume of the toy = (L*W*H) - (½*bhl)
Where,
L = 8 inches
W = 3 inches
H = 3 inches
b = 1 inch
h = 1 inch
l = 8 inches
Plug in the values into the equation
Volume of the toy = (8*3*3) - (½*1*1*8)
Volume = 72 - 4
Volume of the toy = 68 in.³
find the hcf of px4 + px ,qx3 _ qx
Step-by-step explanation:
1st expression
= px^4 + px
= px ( x³ + 1 )
= px ( x + 1) (x² - x + 1)
2nd expression
= qx³ - qx
= qx ( x² - 1 )
= qx ( x + 1) ( x - 1)
HCF = x ( x + 1)
Hope it will help :)❤
If m(x) = x+5/x-1 and n(x)=x-3, which function has the same domain as (m o n)(x)?
it's simple it's really easy so the answer is 2.0 1682
Convert the point from Cartesian to polar coordinates. Write your answer in radians. Round to the nearest hundredth.
(−10,1)
The point (-10, 1) in Cartesian-Coordinates can be represented in polar coordinates as approximately (10.05, 3.0416 radians).
To convert the point (-10, 1) from Cartesian-Coordinates to polar coordinates, we can use the formulas:
r = √(x² + y²)
θ = arctan(y / x)
We know that, the point is (-10, 1), we substitute the values into the formulas:
We get,
r = √((-10)² + 1²) = √(100 + 1) = √101 ≈ 10.05, and
The point lies in second-quadrant, so, the angle is measured counterclockwise from the positive x-axis, which means it is between π/2 and π radians.
Therefore, The adjusted θ is : θ = π + arctan(1/-10) ≈ 3.0416 radians.
Learn more about Polar Coordinates here
https://brainly.com/question/105227
#SPJ4
The augmented matrix of a system of linear equations AX = B was reduced to upper-triangular form so that 2 1 02 [AB] 3 0 where m and n are real numbers. State all values of m and/or n such that the following statements are true. (a) Matrix A is invertible. (b) The system AX- B has no solutions. (c) The system AX = B has an infinite number of solutions. (a) Columns of the augmented matrix (AB) are linearly independent. (e) The system AX = 0 has a unique solution. (f) At least one eigenvalue of the matrix A is zero. (g) Columns of the matrix A form a basis in R3.
a. Matrix A is invertible when |A| = -m ≠ 0 then statement true.
b. The system AX = B has no solution when m = 0 and n ≠ 0 has a real number then statement true.
c. The system AX = B has an infinite number of solutions when m = n = 0 then statement true.
d. Columns of the augmented matrix (AB) are linearly independent when m ≠ 0 and n= 0 then statement true.
e. The system AX = 0 has a unique solution when m ≠ 0 then statement true.
f. At least one eigenvalue of the matrix A is zero when m = 0 then statement true.
g. Columns of the matrix A form a basis in R³ when m ≠ 0 then statement true.
Given that,
The augmented matrix of a system of linear equations AX = B was reduced to upper-triangular form so that
[A|B] = [tex]\left[\begin{array}{ccc}2&1&0 \ | \ 2\\0&-1&3 \ | \ 1 \\0&0&m \ | \ n\end{array}\right][/tex]
Where m and n are real numbers.
We know that,
a. We have to prove matrix A is invertible.
For A to be invertible.
|A| ≠ 0
|A| is the determinant of the matrix A.
|A| = 2(-m) -1(0) + 0(0) = -m
Here, m is the real number.
So, |A| = -m ≠ 0
Therefore, Matrix A is invertible when |A| = -m ≠ 0 then statement true.
b. We have to prove the system AX = B has no solution.
When Rank[A|B] > Rank[A]
m = 0 and n ≠ 0 has a real number
Therefore, The system AX = B has no solution when m = 0 and n ≠ 0 has a real number then statement true.
c. We have to prove the system AX = B has an infinite number of solutions.
When m = n = 0, and Rank[A] < 3
Therefore, The system AX = B has an infinite number of solutions when m = n = 0 then statement true.
d. We have to prove columns of the augmented matrix (AB) are linearly independent.
When m ≠ 0 and m∈R and n= 0
Therefore, Columns of the augmented matrix (AB) are linearly independent when m ≠ 0 and n= 0 then statement true.
e. We have to prove the system AX = 0 has a unique solution.
When [tex]\left[\begin{array}{ccc}2&1&0 \\0&-1&3 \\0&0&m \end{array}\right]\left[\begin{array}{ccc}x\\y\\z\end{array}\right] =\left[\begin{array}{ccc}0\\0\\0\end{array}\right][/tex]
The equation are 2x + y = 0, -y + 3z = 0 and mz = 0
m ≠ 0 should be any real number except zero.
Therefore, The system AX = 0 has a unique solution when m ≠ 0 then statement true.
f. We have to prove at least one eigenvalue of the matrix A is zero.
When λ = 2, 1, m
m = 0 then eigen value is zero
Therefore, At least one eigenvalue of the matrix A is zero when m = 0 then statement true.
g. We have to prove columns of the matrix A form a basis in R³.
When m ≠ 0
Therefore, Columns of the matrix A form a basis in R³ when m ≠ 0 then statement true.
To know more about matrix visit:
https://brainly.com/question/30403694
#SPJ4
What is the vertex of f(x) = -2|x + 1| + 2?
Answer:
(-1,2) i think
Step-by-step explanation:
[tex] \frac{ - 48 + 6}{ - 7} + ( - 3)( - 4)( - 2)[/tex]
Step-by-step explanation:
[tex] \frac{ - 48 + 6}{ - 7} + ( - 3)( - 4)( - 2) \\ = \frac{ - 42}{ - 7} + 12( - 2) \\ = 6 + ( - 24) \\ = 6 - 24 \\ = - 18[/tex]
Combine the like terms to create an equivalent expression for −n+(−4)−(−4n)+6
Answer:
3n + 2
Step-by-step explanation:
−n+(−4)−(−4n)+6
-n - 4 + 4n + 6
3n + 2
PLEASE HELP
WILL GIVE BRAINLIEST
Identify the situation that each graph could represent.
A ray is graphed in the first quadrant. The horizontal axis is labeled Time. The ray starts at the bottom left and continues to the upper right.
A. the length of a necklace that you make at a rate of 10 cm per hour without taking a break
B. the height of a balloon as it rises, gets caught in a tree for a few minutes, and then continues to rise
C. the total distance you are from home if you ride your bicycle three miles per hour for one hour, and then stop and take a rest
D. The volume of water in a bath tub as it is draining.
Answer:
The answer your looking for is, C.
Help please show work how to get the answer.
Answer:
A or D
Step-by-step explanation:
Which of the following sets of ordered pairs does not define a function?
{(1,2),(5,6),(6,7),(10,11),(13,14)}
{(−1,4),(0,4),(1,4),(2,4),(3,4)}
{(1,1),(2,2),(3,3),(4,4),(5,5)}
{(1,3),(5,2),(6,9),(1,12),(10,2)}
Answer: D
Step-by-step explanation: As we can see, D is the only one that has matching inputs, but those inputs have separate outputs. If they don't have the same output, it is not a function
Hope this helps :)
which would result in an integer
Answer:
c I think but I am not sure but I hope you have a good day
find the lateral surface area help needed asap will give brainliest
Step-by-step explanation:
3 Area of lateral = 3 ( bh ) = 12.2 XIO +7.04X12.2 +7.04x 12.2 = 122+85.888+85.888 = 293.776
293.776 approximate to 288
Simplify. Use only one symbol between terms. Use standard form. 6x + 3 - 8 + x
Answer:
7 is the answer
Step-by-step explanation:
Because 6x + 3 -8 + x = x is 6
In each case, write the principal part of the function at its isolated singular points and determine whether that point is a removable singular point, an essential singular point or a pole (please also determine the order m for a pole). Then calculate the residue of the corresponding singular point. a) ( nett for isolatod singular point = = -1 b) (x - 1)2022 exp(-) for isolated singular point = 1.
The principal part at the isolated singular point -1 is not provided, so we cannot determine its nature or residue. And b) The principal part at the isolated singular point 1 is (x - 1)^2022 exp(-1). It is a pole of order 2022, and its residue is 0.
a) The principal part at the isolated singular point -1 is not provided, so we cannot determine its nature (removable singular point, essential singular point, or pole) or calculate its residue without additional information.
b) The given function is (x - 1)^2022 exp(-1). At the isolated singular point x = 1, the principal part of the function is (x - 1)^2022 exp(-1). Here, (x - 1)^2022 represents the pole part of the function, and exp(-1) represents the non-pole part.
Since the term (x - 1)^2022 dominates near x = 1, we can conclude that x = 1 is a pole. The order of the pole is determined by the exponent of (x - 1), which is 2022 in this case.
To calculate the residue, we need more information about the function, specifically the coefficients of the Laurent series expansion near the singular point. Without that information, we cannot determine the residue at x = 1.
To learn more about “The Laurent series” refer to the https://brainly.com/question/32312802
#SPJ11
PLEASE HELP:
The distance d, in kilometers, that a car travels at a speed of 80 km per hour, for t hours, is given by the equation d= 80t. What is the inverse to represent time, t as a function of distance, d?
Choices:
1. t= d/80
2.t= 80/d
3.t= 80d
Answer:
The car was traveling for 1.5 hours.
Step-by-step explanation:
Given that distance d, in kilometers, that a car travels at a speed of 80 km per hour , for t hours, is given by the equation d=80t.
Here wee need to find the time if the car has gone 120 kilometers.
That is
d = 120 km
we need to find t.
d=80t
120 = 80 x t
The car was traveling for 1.5 hours.
In a normal distribution, approximately what percentage of scores fall between the z scores of -1.00 and + 1.00?
In a normal distribution, approximately 68% of scores fall between the z-scores of -1.00 and +1.00.
In a standard normal distribution, which has a mean of 0 and a standard deviation of 1, the Empirical Rule (also known as the 68-95-99.7 Rule) applies. According to this rule, approximately 68% of the data falls within one standard deviation from the mean.
Since the z-scores represent the number of standard deviations a particular value is away from the mean, a z-score of -1.00 represents one standard deviation below the mean, and a z-score of +1.00 represents one standard deviation above the mean. Therefore, using the Empirical Rule, we can conclude that approximately 68% of scores fall between these two z-scores (-1.00 and +1.00).
This percentage represents the central portion of the distribution that is within one standard deviation from the mean, providing a useful measure of the spread and concentration of data in a normal distribution.
Learn more about Standard deviation click here :brainly.com/question/13708253
#SPJ11
If f is any function, then the associated Green's Function G[f] is given by G[f](x) = integral ^x_0 f(s) sin(x - s)ds. Use variation of parameters to show that G[f] is a solution of y" + y = f(x).
We have: u''(x) = ƒ(x)cot(x) - 2u'(x)cot(x).Thus, we can find a particular solution of this differential equation by using variation of parameters.
Let G(x) = ƒ(s)sin(x - s) ds.
Then, by the product rule, we have: G' = ƒ(s)cos(x - s) ds - ƒ(s)sin(x - s) ds, and G'' = -ƒ(s)sin(x - s) ds - ƒ(s)cos(x - s) ds. Hence, we have:G'' + G = ƒ(s)sin(x - s) ds - ƒ(s)cos(x - s) ds + ƒ(s)sin(x - s) ds = ƒ(s)sin(x - s) ds = G.
So, G is indeed a solution of y'' + y = ƒ(x).Next, we will use variation of parameters to find a second solution of the same differential equation.
Let us suppose that we have another solution of the form y = u(x) sin(x).
Then, y' = u(x)cos(x) + u'(x)sin(x), and y'' = - u(x)sin(x) + 2u'(x)cos(x) + u''(x)sin(x).
Substituting these into the differential equation, we get:- u(x)sin(x) + 2u'(x)cos(x) + u''(x)sin(x) + u(x)sin(x) = ƒ(x)2u'(x)cos(x) + u''(x)sin(x) = ƒ(x)
Dividing by sin(x), we get:2u'(x)cot(x) + u''(x) = ƒ(x)cot(x).
Now, let us assume that the second solution is of the form y = u(x)sin(x), where u is a function to be determined.
Then, we have: y' = u(x)cos(x) + u'(x)sin(x) and y'' = - u(x)sin(x) + 2u'(x)cos(x) + u''(x)sin(x).
Substituting these into the differential equation, we get: - u(x)sin(x) + 2u'(x)cos(x) + u''(x)sin(x) + u(x)sin(x) = ƒ(x)2u'(x)cos(x) + u''(x)sin(x) = ƒ(x)
Dividing by sin(x), we get:2u'(x)cot(x) + u''(x) = ƒ(x)cot(x).
Hence, we have: u''(x) = ƒ(x)cot(x) - 2u'(x)cot(x).Thus, we can find a particular solution of this differential equation by using variation of parameters.
Know more about differential equation here,
https://brainly.com/question/32538700
#SPJ11
PLEASE ASAP HELP!!!
The American Hospital Association stated in its annual report that the mean cost to community hospitals per patient per day in U.S. hospitals was $1231 in 2007. In that same year, a random sample of 25 daily costs in the state of Utah hospitals yielded a mean of $1103. Assuming a population standard deviation of $252 for all Utah hospitals, do the data provide sufficient evidence to conclude that in 2007 the mean cost in Utah hospitals is below the national mean of $1231? Perform the required hypothesis test at the 5% significance level.
We can conclude that the null hypothesis is rejected. There is sufficient evidence to support the claim that the mean cost in Utah hospitals is below the national mean of $1231.
How is this so?H₀: μ ≥ 1231 (The mean cost in Utah hospitals is greater than or equal to the national mean)
Hₐ: μ < 1231 (The mean cost in Utah hospitals is below the national mean)
Given
Sample mean (x) = $1103Sample size (n) = 25Population standard deviation (σ) = $252Significance level (α) = 0.05The test statistic for a one-sample t-test is given by
t = (x - μ) / (σ / √n)
Substituting we have
t = (1103 - 1231) / (252 / √25)
≈ -6.103
To determine the critical value, we need to find the critical t-value at the 5% significance level with degrees of freedom
(df) equal to (n - 1)
= (25 - 1)
= 24.
Using a t-distribution table or calculator, the critical value is approximately -1.711.
Since the calculated test statistic (-6.103) is smaller than the critical value (-1.711) and falls into the critical region, we reject the null hypothesis.
Learn more about standard deviation at:
https://brainly.com/question/475676
#SPJ4
The time it takes for someone to finish a bowl of ramen can be modeled by a random variable with the following moment generating function:
M(t)= 1/ (1−0.05t)1,t<0.05
Find the variance of the time it takes for someone to finish a bowl of ramen.
Therefore, the variance of the time it takes for someone to finish a bowl of ramen is 4.6875.
Given, The moment generating function of the time it takes for someone to finish a bowl of ramen is
M(t)= 1/ (1−0.05t)1,t<0.05 We have to find the variance of the time it takes for someone to finish a bowl of ramen.
The variance of the random variable can be calculated by the formula Variance = M''(0) - [M'(0)]^2 where M(t) is the moment generating function of the random variable M'(t) is the first derivative of M(t)M''(t) is the second derivative of M(t)
We need to find M''(t) and M'(t)M(t) = 1/(1 - 0.05t)M'(t) = [0.05/(1 - 0.05t)^2]M''(t) = [0.1/(1 - 0.05t)^3] Now, at t = 0, M(0) = 1, M'(0) = 1.25, M''(0) = 6.25 Variance = M''(0) - [M'(0)]^2 Variance = 6.25 - (1.25)^2 Variance = 6.25 - 1.5625 Variance = 4.6875
To Know more about variance visit:
https://brainly.com/question/30044695
#SPJ11
Given: The time it takes for someone to finish a bowl of ramen can be modeled by a random variable with the following moment generating function: M(t)= 1/ (1−0.05t)1,t<0.05. The variance of the time it takes for someone to finish a bowl of ramen is 400.
The moment generating function of a random variable is defined as [tex]$M(t) = \mathbb{E}(e^{tX})$[/tex] for all t in an open interval around 0 which X is a random variable.
We are given that the moment generating function of the random variable T is given by:
[tex]$$M(t)= \frac{1}{1-0.05t} ,\ t < 0.05$$[/tex]
The [tex]$n^{th}$[/tex] derivative of M(t) at 0 is given by:
[tex]$$\frac{d^n}{dt^n} M(t) \biggr|_{t=0} = \mathbb{E}(X^n)$$[/tex]
We differentiate $[tex]M(t)$[/tex] with respect to $t$ to get [tex]$$M'(t) = \frac{0.05}{(1 - 0.05t)^2}$$[/tex].
Differentiating [tex]$M'(t)$[/tex] with respect to [tex]$t$[/tex] we get [tex]$$M''(t) = \frac{2(0.05)^2}{(1-0.05t)^3}$$[/tex].
Differentiating [tex]$M''(t)$[/tex] with respect to [tex]$t$[/tex] we get [tex]$$M'''(t) = \frac{6(0.05)^3}{(1-0.05t)^4}$$[/tex].
Substituting t = 0, we get [tex]$$M'(0) = \frac{1}{0.05} = 20$$[/tex]
[tex]$$M''(0) = \frac{2}{(0.05)^3} = 800$$[/tex]
[tex]$$M'''(0) = \frac{6}{(0.05)^4} = 4800$$[/tex]
Using the following formula to calculate the variance of X: [tex]$$Var(X) = \mathbb{E}(X^2) - [\mathbb{E}(X)]^2$$[/tex], where [tex]$$\mathbb{E}(X^2) = M''(0) = 800$$[/tex].
[tex]$$[\mathbb{E}(X)]^2 = [M'(0)]^2 = 400$$[/tex]
Hence, we get:$$Var(X) = 800 - 400 = \boxed{400}$$.
To know more about Moment generating function, visit:
https://brainly.com/question/30763700
#SPJ11
Assume that the prevalence of breast cancer is 13%. The
diagnostic test has a sensitivity of 86.9% and a
specificity of 88.9%. If a patient gets a positive result
What is the probability that the patient has breast cancer?
The probability that the patient has breast cancer given a positive result is 62.2%.
The probability of testing positive given the patient has breast cancer is:
P(P|C) = 0.869
The specificity of the test is 88.9% or 0.889, meaning that the test will correctly identify 88.9% of patients who do not have breast cancer as not having the disease.
So, the probability of testing negative given the patient does not have breast cancer is:
P(N|N) = 0.889
Now, using Bayes' theorem:
P(C|P) = P(P|C) * P(C) / P(P)
where,P(P) = P(P|C) * P(C) + P(P|N) * P(N)
Here, P(P|N) is the probability of testing positive given that the patient does not have breast cancer. This is equal to 1 - specificity = 1 - 0.889 = 0.111.
So, P(P) = P(P|C) * P(C) + P(P|N) * P(N) = 0.869 * 0.13 + 0.111 * (1 - 0.13) = 0.1823
So,P(C|P) = 0.869 * 0.13 / 0.1823 = 0.622 or 62.2%
Learn more about probability at:
https://brainly.com/question/30841158
#SPJ11
It's been found that there is a 15% chance (3 out of 20) that you can
win a particular game. How many "wins” would you have if you
played 80 times?
What is 5x÷6=20
Pls help I can't figure it out
Answer:
x= 24
Step-by-step explanation:
5x=20*6
x=120/5
x=24
Hope this helps! Plz mark as brainliest! :)
Mark sorted a set of shapes into two different categories. Explain, what two attributes were used to sort the shapes. help please!!
Group A parallelogram, Group B Quadrilateral.
Answer: Parallelogram and Quadrilateral.
The two ways of classifying shapes are: Parallelogram and Quadrilateral.
There are different ways to classify an item.
How do one identify the type of quadrilateral?Quadrilaterals can be known by;
It is a polygon with four sides.
Since rectangle is known to be a parallelogram that has four right angles.
A trapezoid is regarded as a quadrilateral with only one pair of parallel sides.
And Parallelograms are known to be shapes that has four sides with only two pairs of sides that are known to be parallel.
So we conclude that Group A parallelogram, and Group B Quadrilateral.
learn more about Quadrilaterals from;
brainly.com/question/16691874
#SPJ2