Answers
Answer:
No Its B Unsaturated becuase the line is slanted
Explanation:
Related Questions
What would be the phenotypes of the offspring?
Answers
Answer question number 4
Answers
Answer: Choice A
Explanation:
Considering the principles of KMT, which scenario would result in an increase of particles effective collisions at STP None of the above None of the above In a balloon In a balloon A container with large volume A container with large volume A container with small volume
Answers
Answer:
A container with small volume
Explanation:
The question is obviously incomplete because the image attachments are missing.
However, it is necessary to note that, the effective collisions depends on the volume of the gas.
The lesser the gas volume, the greater the effective collision between particles at STP.
Hence from the KMT, the scenario having the least volume of gas will have the greatest magnitude of effective collisions.
Name this element.
i need the answer like now
Answers
Why Hund's Rule is called maximum spin multiplicity rule?
Answers
Answer:
The rule states that for a given electron configuration, the lowest energy term is the one with the greatest value of spin multiplicity. This implies that if two or more orbitals of equal energy are available, electrons will occupy them singly before filling them in pair
Explanation:
after eating an apple and levaing it on top of the table. what will happend to the color of the inner part of the apple? what makes the color of the apple change
Answers
Answer:
Answer Below
Explanation:
When you leave an apple on a table outside it will turn brown. This happens because when you cut an apple, you are exposing it's insides to the oxygen in the air. This causes the PPO (polyphenol oxidase) enzyme in the apple's flesh to oxidize the polyphenols, turning them into some other brown colored products. Hence, the color change.
Answer:
brown i can't explain because its a matter of the atoms in the apple mixing with the air and apple is made with nitrogen
which one only has one type of
atom In it.
Element , compound
Answers
Answer:
element
Explanation:
[04.01] Which best describes the transition from gas to liquid?
Answers
Answer:
When gaseous state changes into liquid state the molecules slow down in speed because of decrease in energy molecules come slightly closer to each other.
Please can I have help on question e as I’m really stuck.I promise I’ll give out brainiest
Answers
The relative atomic mass of element A : 6.075 u
Further explanationThe elements in nature have several types of isotopes
Isotopes are atoms whose no-atom has the same number of protons while still having a different number of neutrons.
So Isotopes are elements that have the same Atomic Number (Proton)
Atomic mass is the average atomic mass of all its isotopes
Mass atom X = mass isotope 1 . % + mass isotope 2.% ...
Element A
mass number of isotope 1 = 6 , percent : 92.5%
mass number of isotope 2 = 7, percent : 7.5
Relative atomic mass of element A
[tex]\tt = 92.5\%\times 6+7.5\%\times 7\\\\=5.55+0.525=6.075~u[/tex]
Organizing information in a meaningful way is an example of what?
Answers
Answer:
Observation
Explanation:
In chemistry a chemist conducts an experiment and he/she concludes some points and arranges information about his/her experiment can be called observation or result
Organizing information in a meaningful way is an example of good management and the proper establishment of the research parameters.
In research, the correct organization of information is of the utmost importance.Information is the key to get proper results during research.That is why researchers must be very careful in the way they handle information.Proper sources should be taken into consideration to do research.The information obtained should be correctly organized and classified, according to the framework of research. This meaningful organization is key to the following interpretation of results.We conclude that organizing information in a meaningful way is an example of the proper control and follow-up process in research to interpret data and have valid conclusions.Learn more about this topic here:
https://brainly.com/question/19171560?referrer=searchResults
Prototypes are used to
a. communicate a solution.
b. test the operation of a product.
c. identify a need.
d research a problem.
Answers
Answer:
Test the operation of the product
Explanation:
Explanation: the definition of prototype is
As a verb
“make a prototype of (a product).”
Or noun
“a first, typical or preliminary model of something, especially a machine, from which other forms are developed or copied.”
Can you help me please
Answers
what are your steps to this from the lesson
Which two elements make up household ammonia?
A. neon and
helium
B. neon and
hydrogen
C. nitrogen and
helium
D. nitrogen and
hydrogen
ordt
English (US
Answers
Answer:
D. Nitrogen and Hydrogen
Explanation:
Answer: d
Explanation: took test
HELP ME PLEASE WILL MARK BRAINLIEST! DUE AT 8PM TODAY1. What is the unit of measure for the graduated cylinder? What is the maximum it can measure? What is the minimum measurement?
2. Look at the smallest division on the graduated cylinder. What amount does the smallest division measure?
3.
What are the units of measure on the plastic cup? What is the maximum amount it can measure? What is the minimum measurement?
Answers
Answer:
1. Is fortnite travis scott burger
2. Beetlejuice the second
3. The measurement is 69420
Explanation:
my mom told me
Write a complete, balanced chemical equation where tin metal reacts with aqueous hydrochloric acid to produce tin(II) chloride and hydrogen gas. Include states.
From the equation, which element is oxidized, and which element is reduced?
Answers
Answer:
1. The balanced equation is given below:
Sn (s) + 2HCl (aq) –> SnCl₂ (aq) + H₂ (g)
2a. H is oxidized.
2b. Sn is reduced.
Explanation:
1. Balanced equation for the reaction between tin (Sn) metal and aqueous hydrochloric acid (HCl) to produce tin(II) chloride (SnCl₂) and hydrogen gas (H₂).
This is illustrated below:
Sn (s) + HCl (aq) –> SnCl₂ (aq) + H₂ (g)
There are 2 atoms of Cl on the right side and 1 atom on the left side. It can be balance by putting 2 in front of HCl as shown below:
Sn (s) + 2HCl (aq) –> SnCl₂ (aq) + H₂ (g)
Now, the equation is balanced
2. Determination of the element that is oxidize and reduced.
This can be obtained as follow:
We shall determine the change in oxidation number of each element.
NOTE:
a. The oxidation number of H is always +1 except in hydrides where it is –1.
b. The oxidation state of Cl is always –1.
Sn (s) + 2HCl (aq) –> SnCl₂ (aq) + H₂ (g)
For Tin (Sn):
Sn = 0
SnCl₂ = 0
Sn + 2Cl = 0
Cl = – 1
Sn + 2(–1) = 0
Sn – 2 = 0
Collect like terms
Sn = 0 + 2
Sn = +2
Therefore, the oxidation number of Tin (Sn) changes from 0 to +2
For H:
H = +1
H₂ = 0
The oxidation number of H changes from +1 to 0
For Cl:
Cl is always –1. Therefore no change.
Summary:
Element >>Change in oxidation number
Sn >>>>>>>From 0 to +2
H >>>>>>>>From +1 to 0
Cl >>>>>>>No change
Therefore,
Sn is reduced since its oxidation number increased from 0 to +2.
H is oxidized since it oxidation number reduced from +1 to 0
The balanced chemical equation for the reaction is
Sn(s) + 2HCl(aq) → SnCl₂(aq) + H₂(g)
and the element that oxidized is tin (Sn) while the element that is reduced is hydrogen (H)
The balanced chemical equation for the reaction where tin metal reacts with aqueous hydrochloric acid to produce tin(II) chloride and hydrogen gas is
Sn(s) + 2HCl(aq) → SnCl₂(aq) + H₂(g)
From the equation,
The element that is oxidized is tin (Sn), because the oxidation state of Sn increased from 0 to +2
The element that is reduced is hydrogen (H), because the oxidation state of H decreased from +1 to 0.
Hence,
The balanced chemical equation for the reaction is
Sn(s) + 2HCl(aq) → SnCl₂(aq) + H₂(g)
and the element that oxidized is tin (Sn) while the element that is reduced is hydrogen (H).
Learn more here: https://brainly.com/question/12913997
The maximum number of electrons that can fill the second energy level
Answers
Answer:
8
Explanation:
Lizzie is pushing Alex on a scooter. Lizzie is pushing with 75 N of force to the left,
and Alex is helping with 20 N to the left. What is the net force on the scooter?*
Answers
Answer:
95 N
Explanation:
they are both pushing in the same direction so you simply add
75+20=95
The first chemists, philosophers like, Aristotle were from which country?
Answers
Answer:
greece
Explanation:
aristole was particularly from stagria, greece. but most early philosophers are from greece
Which of the following elements has the lowest ionization energy?
A. chlorine (CI)
B. potassium (K)
C. magnesium (Mg)
D.neon (Ne)
Answers
Answer:
B. Potassium
Explanation:
Potassium
5. The diagram above shows what happened when an irregular solid was immersed in water. This irregular solid has the same mass as a gold block, which is 2 cm wide by 2 cm high by 5 cm long. Using the method described in the passage, compare the density of the unknown with the density of gold.
A. Equal to gold
B. Less than gold
C. Greater than gold
D. Cannot be determined
Answers
The density of the unknown will be greater than the density of gold.
An overview will be given since the diagram isn't given. The formula to calculate the density of an irregular shape will be the mass divided by the volume.
The density is the mass per volume. From the information given, since they've the same mass, then it means that the volume of the gold will be more than the volume of the unknown. Therefore, the density of the unknown will be greater than gold.
Read related link on:
https://brainly.com/question/18370124
which electrons are the valence of electrons of the atom?
Answers
Answer:
Valence electrons are the electrons in the outermost shell, or energy level, of an atom. For example, oxygen has six valence electrons, two in the 2s subshell and four in the 2p subshell.
why does the moon shine
Answers
Answer:
The moon reflects light from the sun making it appear bright in the sky.
Explanation:
Answer: Its a reflection of the sun's light
Explanation: the light from the sun bounces off of the moon
Which answer choice best explains why nuclear reactions release more energy than chemical reactions? Electrostatic forces of repulsion are thousands of times stronger than gravitational forces. Gravitational forces are thousands of times stronger than electrostatic forces of repulsion. The force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons. The force that attracts and repels protons and electrons is stronger than the force that binds together protons and neutrons.
Answers
Answer:
The force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons.
Explanation:
1. Protons are positively charged. Protons have a mass of 1.
2. Neutrons are uncharged. Neutrons have a mass of 1.
3. Electrons are negatively charged. Electrons have almost no mass.
Nuclear reactions release more energy than chemical reactions as the force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons.
Answer:
C) The force that binds together protons and neutrons is stronger than the force that attracts and repels protons and electrons.
Explanation:
Identify the reaction type shown and describe the clues that were used to identify it.
Fe2O3 + 2SiO2 → Fe2Si2O7
Answers
A helium-filled balloon is released into the atmosphere. As the balloon rises, which
would MOST likely increase and cause the balloon to burst?
O the volume of the helium
O the mass of the helium
o the temperature of the helium
O the density of the helium
Answers
During evaporation, what causes certain liquid molecules to become vapor molecules? A. Decreased fluidity A. Increased viscosity A. Decreased kinetic energy A. Increased kinetic energy.
Answers
Answer:
The answer is A. Decreased Fluidity
Explanation:
Taking the test on preformance matters
In evaporation, particles of liquids take energy in the form of sunlight from the surrounding and then convert into vapor phase. Increased kinetic energy causes certain liquid molecules to become vapor molecules.
What is evaporation?Evaporation is a physical process in which the water in liquid state converts to gaseous state at the temperature below its boiling point. Evaporation happens before the boiling process.
Evaporation causes cooling effect in the surrounding. During summer when water is kept in earthen pot water cools, this is because of the evaporation process.
Evaporation is affected by temperature. As the temperature increases, kinetic energy of liquid molecules also increases and hence the rate of evaporation increases.
Therefore, increased kinetic energy causes certain liquid molecules to become vapor molecules.
To know more about evaporation, here:
https://brainly.com/question/8169606
#SPJ2
1. The ability to dissolve in water and to conduct
electricity are examples of
a. physical properties.
b. chemical changes.
c. chemical properties.
d. chemical bonding.
Answers
Answer:
Physical
Explanation:
Because thats the answer
3. In an exercise to teach students how to use and analytical balance, the instructor
gives a student a quarter which has been pre-weighed as 5.6026 g. The weight that the
student obtains for the same quarter is 5.6013 g. What is the percent error in the
students reading?
Answers
Answer:
The percent error is 0.023%.
Explanation:
Pre-weighed of a quarter is 5.6026 g.
The weight that the student obtains for the same quarter is 5.6013 g.
We need to find the percent error in the students reading. It is given by the formula as follows :
[tex]\%=\dfrac{|\text{original value-calculated value}|}{\text{original value}}\times 100[/tex]
Putting all the values, we get :
[tex]\%=\dfrac{5.6026 -5.6013 }{5.6026 }\times 100\\\\\%=0.023\%[/tex]
So, the percent error is 0.023%.
The transition metals (with the exception of Zn, Cd and Hg) are very much hard and have low volatility. Why Zn ,Cd and Hg has low melting points. (a) These have all their electrons paired. (b) These have maximum number of unpaired electrons. (c) These have very strong metallic bonding. (d) These have more metal-metal bonding.
Answers
Answer:
Zn ,Cd and Hg has low melting points because - These have all their electrons paired.
Explanation:
These have all their electrons paired -: All the electrons in the d-subshell are combined with Zn , Cd and Hg. The metallic bonds present in them are, therefore, weak. This is why they have low points of melting and bolting. therefore , this statement is true. These have maximum number of unpaired electrons. Since , these transition metals have all electrons paired , so this statement is incorrect.These have very strong metallic bonding -: Zn, Cd and Hg d-orbital are completely filled. They have poor metallic bonding and less compact packing due to their fully filled d-orbitals, so all of them are volatile in nature. Therefore, this statement is also not valid .These have more metal-metal bonding. -: Since , their metallic bond is weak , so this statement is not true .Hence , the correct option is A (These have all their electrons paired).
A cup of hot water contains fewer molecules than a tub of hot water. This same cup of hot water will freeze faster than a tub of hot water. The total thermal energy of a system is not only dependent on the state of the material but also on the (resistance, heat, temp, half-life) and the total number of (atoms, currents, compounds, electromagnetic waves) in the system.
Answers
Answer:
The correct options are;
1) Heat
2) Atoms
Explanation:
The heat required to raise a unit mass of a substance by one degree which is the specific heat capacity of the substance, is a quantity characteristic of a given substance and the amount of temperature change experienced by the substance when an amount of heat energy transferred to the substance is a function of the mass of the substance, which is a function of the number of atoms present in the substance.
So also, the total thermal energy that is stored by a substance, that causes a given amount of temperature change, is a function of the heat capacity of the substance.