A rocket traveling at 36.96 m/s is accelerated uniformly to 74.44 m/s over a 21.37 s interval. What is its displacement during this time?

Answer:

Decreases

Explanation:

Force= mass * acceleration

If the mass increases but force stays the same then the acceleration would have to decrease to maintain the same force

The average net force required to accelerate the car is 3240 N

This is defined as the rate of change of velocity which time. It is expressed as

a = (v – u) / t

Where

a = (v – u) / t

a = (27 – 0) / 10

a = 2.7 m/s²

F = ma

F = 1200 × 2.7

F = 3240 N

Learn more about acceleration:

https://brainly.com/question/491732

#SPJ6

Answer:

a

Explanation:

A student bought a 1.55-ounce chocolate bar and left it in a car on a hot day.  Exactly 1.55 ounces of chocolate are in the melted bar. Hence, option (A) is correct.

In physics, mass is a quantitative measurement of inertia, a basic characteristic of all matter. It essentially refers to a body of matter's resistance to changing its speed or location in response to the application of a force.

The change caused by an applied force is smaller the more mass a body has. The kilogram serves as the unit of mass in the International System of Units (SI).

As mass does not depends on the state of the object, exactly same mass of chocolate are in the melted bar that it was in chocolate bar. So, 1.55 ounces of chocolate are in the melted bar. Hence, option (A) is correct.

Learn more about mass here:

https://brainly.com/question/19694949

#SPJ2

25/2=12.5s

12.5*9.8=122.5 m/s

Answer:

(a) The kinetic energy of the can when the can is at a height of 3.00 m.

(b) The speed with which the can will hit the ground is 9.9 m/s

Explanation:

(a) Kinetic energy is a form of energy. It is defined as the energy associated with bodies that are in motion and this energy depends on the mass and speed of the body.

Kinetic energy is defined as the amount of work necessary to accelerate a body of a given mass and at rest, until it reaches a given speed.

Kinetic energy is represented by the following formula:

Ec = ½ mv²

Where Ec is kinetic energy, which is measured in Joules (J), m is mass measured in kilograms (kg), and v is velocity measured in meters over seconds (m/s).

On the other hand, potential energy is the energy that measures the ability of a system to perform work based on its position. In other words, this is the energy that a body has at a certain height above the ground.

Gravitational potential energy is the energy associated with the gravitational force. This will depend on the relative height of an object to some reference point, the mass, and the force of gravity. Then for an object with mass m, at height h, the expression applied to the gravitational energy of the object is:

Ep = m g h

Where Ep is the potential energy in joules (J), m is the mass in kilograms (kg) is h the height in meters (m) and g is the acceleration of fall in m/s² (approximately 9.8 m/s²)

Energy is neither created nor destroyed, but only transforms from one state to another. This principle also extends to mechanical energy, so that in an isolated system, the sum of kinetic and potential energies between two instants of time remains constant:

½ m*v1² + m*g*h1=  ½ m*v2² + m*g*h2

 where v1 and h1 are the initial speed and height and v2 and h2 the final speed and height.

In this case:

Replacing:

½ m*0² + m*g*5=  ½ m*v2² + m*g*3

Solving:

m*g*5= ½ m*v2² + m*g*3

The mass m appears in all terms, being able to simplify:

g*5=  ½ v2² + g*3

Solving for v2:

[tex]v2=\sqrt{\frac{g*5-g*3}{\frac{1}{2} } }[/tex]

being g= 9.8 m/s²:

v2= 6.26 m/s

The speed at 3 meters height is 6.26 m/s

Then the kinetic energy is calculated as:

Ec = ½ mv²

Ec = ½ 1.25 kg* (6.26 m/s)²

Ec= 24.49 J

The kinetic energy of the can when the can is at a height of 3.00 m.

(b) You know:

½ m*v1² + m*g*h1=  ½ m*v2² + m*g*h2

 where v1 and h1 are the initial speed and height and v2 and h2 the final speed and height.

In this case:

Replacing:

½ m*0² + m*g*5=  ½ m*v2² + m*g*0

Solving:

m*g*5= ½ m*v2²

g*5=  ½ v2²

[tex]v2=\sqrt{\frac{g*5}{\frac{1}{2} } }[/tex]

being g= 9.8 m/s²:

v2= 9.9 m/s

The speed with which the can will hit the ground is 9.9 m/s

Answer:

ou have I=200mA, E=40J, t=30s, and you want to find the voltage drop.

First, you should know that  P=V⋅I , so V=PI

Second, you have the amount of energy converted in a certain amount of time, so E=P⋅t

So, find the power and use it to find the voltage drop.

this works , but i thought energy was defined by W = P * t whitch would then be P = W/t

Answer:

1) θ = 45.91°

2) θ = 21.04°

Explanation:

We are given;

Wavelength; λ = 665 nm = 6.65 × 10^(-7) m.

Distance between slits; d = 1mm/270 = 1/270 mm = (1/270) × 10^(-3) m

1) To find the angle, we will use the formula;

d sin θ = mλ

Where m is the order of peak which in this question is 4.

Thus, we have;

sin θ = mλ/d

sin θ = (4 × 6.65 × 10^(-7))/((1/270) × 10^(-3))

sin θ = 0.7183

θ = sin^(-1) 0.7183

θ = 45.91°

2) Similarly, d sin θ = mλ

Where m is the order of peak which in this question is 2. Thus;

sin θ = (2 × 6.65 × 10^(-7))/((1/270) × 10^(-3))

sin θ = 0.3591

θ = sin^(-1) 0.3591

θ = 21.04°

Answer:

b. identical to the downward force of gravity on the person.

Explanation:

For an object in an elevator,

F = mg - ma       (g > a)

But since the velocity is uniform, a = 0.

Then,

F = mg - 0

F = mg

This is the actual weight of the object.

The object does not feel weightless, so that its actual weight can be measured during the downward motion of the elevator with uniform velocity.

Thus, the upward normal force, N, exerted by the elevator floor on the person is identical to the downward force of gravity on the person.

Answer:

physical sicence boilagiy sxcience and earth science

Explanation:

Answer:

Hii I m Indian.......♥️

Answer:

[tex]J = 3~Kg.m/s[/tex]

Explanation:

Impulse and Momentum

The impulse-momentum theorem states that the change in momentum of an object equals the impulse applied to it.

The equation can be written as follows:

[tex]J =\Delta p = p_2-p_1[/tex]

Where:

J    = Impulse

p2 = Final Momentum

p2 = Initial Momentum

The momentum can be calculated as:

p = m.v

Where m is the mass of the object and v is the velocity.

The tennis ball with mass m=60 g = 0.06 Kg was served from rest (v1=0) to v2=50 m/s. The change in momentum is:

[tex]\Delta p = 0.06Kg~50~m/s-0[/tex]

[tex]\Delta p = 3~Kg.m/s[/tex]

Thus the impulse is:

[tex]\marhbf{J = 3~Kg.m/s}[/tex]

Answer:

last one

Explanation:

Answer:

horizontal component=fcostita

=150cos60

use calculator to evaluate it

for vertical=fsintita

=150sin60

Answer:

To find the weight of something, simply multiply its mass by the value of the local gravitational field, and you get a result in newtons (N). For example, if your mass is 50 kg (about 110 pounds), then your weight is (50) (9.8). The point that must be overwhelmingly emphasized is that weight is a force.

Explanation:

Answer:

The 300 Ohm resistor

Explanation:

They are in series, so the current has to be the same in both.  P = I^2R, so with the same current, the larger resistor dissipates more power.

Answer:

900

Explanation:

v = s / t = 9000m / 10 s = 900m/s

Explanation:

The speed of a rocket that travel 9km in 10 second is 900

Answer:

A. change in acceleration or direction

Explanation:

A motion map can be defined as the graphical representation of the acceleration, velocity and position of a body or an object at specific intervals (period of time) or time readings.

For motion maps that illustrate accelerated motion, a new level indicates a change in acceleration or direction.

Acceleration can be defined as the rate of change of the velocity of an object with respect to time.

This simply means that, acceleration is given by the subtraction of initial velocity from the final velocity all over time. Hence, if we subtract the initial velocity from the final velocity and divide that by the time, we can calculate an object’s acceleration.

Mathematically, acceleration is given by the equation;

[tex]Acceleration (a) = \frac{final \; velocity - initial \; velocity}{time}[/tex]

Additionally, acceleration is a vector quantity because it has both magnitude and direction.

Answer:

A

Explanation:

EDG 2021

Answer:

the answer is c.

Explanation:

Answer:

The Equation of Newton's Law of Gravity. G is called the Gravitational Constant, and has the value 6.67×10-11 N ∙m2kg-2 (N is for Newton, the physicists' unit of force)or 1.5×10-11 lb∙m2kg-2

Explanation:

Gravitational force is an attractive force that exists between all objects with mass . an object with mass attracts another object with mass.

Mass of second object is [tex]1.6825*10^{15}[/tex] kg

If two bodies have mass m₁ and m₂ . Then attractive force between them is calculated by formula show below,

                                  [tex]F=G\frac{m1m2}{r^{2} }[/tex]

Where r is distance between bodies. and G is gravitational constant.

G = [tex]6.67*10^{-11}[/tex]  [tex]Nm^{2}/kg^{2}[/tex]

Here,  F = 500N, m₁=20 kg and r= 67 m

Substituting above values in force equation.

            [tex]500=\frac{6.67*10^{-11}*20*m2 }{(67)^{2} } \\\\m2=1.6825*10^{15} Kg[/tex]

Learn more:

https://brainly.com/question/17728085

Answer:

R₂₈₅₀ =  0.838 ohms

Explanation:

The resistance of an element at some other temperature than 0°C can be given by the following formula:

Rₓ = R₀(1 + ∝ΔT)

where,

Rₓ = Resistance at temperature x

R₀ = Resistance at 0°C

∝ = Coefficient of linear expansion of tungsten = 0.5 x 10⁻³ /°C

ΔT = Change in Temperature

So, for the resistance of tungsten wire at 25°C:

Rₓ = R₂₅ = 0.35 ohms

ΔT = 25°C

Therefore,

0.35 ohms = R₀[1 + (0.5 x 10⁻³ /°C)(25°C)]

R₀ = (0.35 ohms)/1.0125

R₀ = 0.345 ohms

Now, we find the resistance at 2850°C

R₂₈₅₀ = (0.345 ohms)[1 + (0.5 x 10⁻³ /°C)(2850°C)]

R₂₈₅₀ =  0.838 ohms

Answer:

θ = 122°

Explanation:

Components of a Vector

A vector in the plane can be defined by its rectangular components:

[tex]\vec A =<x,y>[/tex]

Or also can be given by its polar components:

[tex]\vec A =<r,\theta>[/tex]

Where r is the magnitude of the vector and θ is the angle it forms with the positive direction of x.

The relation between them is:

[tex]r=\sqrt{x^2+y^2}[/tex]

[tex]\displaystyle \theta=\arctan\frac{y}{x}[/tex]

It's given the x-component of vector A is x=-25 m and the y-component is y=40 m

(a)

The magnitude of the vector is:

[tex]r=\sqrt{(-25)^2+40^2}[/tex]

[tex]r=\sqrt{625+1600}[/tex]

[tex]r=\sqrt{2225}[/tex]

[tex]r\approx 47.2\ m[/tex]

(b)

[tex]\displaystyle \theta=\arctan\frac{40}{-25}[/tex]

[tex]\displaystyle \theta=\arctan (-1.6)[/tex]

The calculator gives us the value

θ = -58°

But the real angle lies on the second quadrant since x is negative and y is positive, thus:

θ = -58° + 180° = 122°

θ = 122°

Answer:

Explanation:

Step one:

given data

mass of ball m1=5kg

initial velocity of ball u1=10m/s

mass of pin m2=2kg

initial velocity of pin u2= 0m/s

final velocity of ball v2=8m/s

final velocity of pin v2=?

Step two:

The expression for elastic collision is given as

m1u1+m2u2=m1v1+m2v2

substituting we have

5*10+2*0=5*8+2*v2

50+0=40+2v2

50-40=2v2

10=2v2

divide both sides by 2

v2=10/2

v2=5m/s

The pin's final velocity is 5m/s

Answer:

0.11 m/s

Explanation:

From the question given above, the following data were obtained:

Initial displacement (d1) = 1.09 m

Final displacement (d2) = 2.55 m

Time (t) = 12.8 s

Average velocity =?

Next, we shall determine the total displacement (i.e change in displacement). This can be obtained as follow:

Initial displacement (d1) = 1.09 m

Final displacement (d2) = 2.55 m

Total displacement = d2 – d1

Total displacement = 2.55 – 1.09

Total displacement = 1.46 m

Finally, we shall determine the average velocity of the beetle. This can be obtained as follow:

Total Displacement = 1.46 m

Total time (t) = 12.8 s

Average velocity =?

Average velocity = Total Displacement / Total time

Average velocity = 1.46/12.8

Average velocity = 0.11 m/s

Thus, the average velocity of the beetle is 0.11 m/s

Answer:

3

Explanation:

3

Answer:

a

 [tex]\mu = 0.0023 \ A\cdot m^2[/tex]

b

[tex]\tau = 0.00080 \ N \cdot m[/tex]

Explanation:

From the question we are told that

  The dimensions of the  rectangular coil is 5.40 cm ✕ 8.50 cm  = 0.054 m X 0.085 m

   The  number of turns is  [tex]N = 25 \ turns[/tex]

   The current it  is carrying is  [tex]I = 20 \ mA = 0.02 \ A[/tex]

    The magnetic field is [tex]B = 0.350 \ T[/tex]

Generally the magnitude of the magnetic dipole moment is mathematically represented as

       [tex]\mu = N * I * A[/tex]

Here  A  is the area which is mathematically represented as

     [tex]A = 0.054 * 0.085[/tex]

=>  [tex]A = 0.00459 \ m^2[/tex]

So  

     [tex]\mu = 25 * 0.02 * 0.00459[/tex]

=>  [tex]\mu = 0.0023 \ A\cdot m^2[/tex]

Generally the  magnitude of the torque acting on the loop is mathematically represented as

    [tex]\tau = \mu * B[/tex]

=>[tex]\tau = 0.0023 * 0.350[/tex]

=>[tex]\tau = 0.00080 \ N \cdot m[/tex]

Answer:

(c) 0.174 nm

Explanation:

According to de Broglie hypothesis, the wavelength of the wave associated with electron is given by:

[tex] \boxed{ \bf{\lambda = \sqrt{\dfrac{150}{V \ (in \ Volt)}} \: \text{\AA}}}[/tex]

V → Potential Difference (50.0 V)

By substituting value of potential difference in the equation, we get:

[tex] \rm \longrightarrow \lambda = \sqrt{\dfrac{150}{50}} \: \text{\AA} \\ \\ \rm \longrightarrow \lambda = \sqrt{3} \: \text{\AA} \\ \\ \rm \longrightarrow \lambda = 1.74 \: \text{\AA} \\ \\ \rm \longrightarrow \lambda = 0.174 \: nm[/tex]

Answer:

See the answer below

Explanation:

Average speed = total distance traveled/total time taken

In order to determine the total distance traveled by the coach, consider the attached image.

Distance covered:

30 yd. line to 10 yd. line (A to B)= 20 yds

10 yd. line to 50 yd. line (B to C) = 40 yds

50 yd. line to 20 yd. line (C to D) = 30 yds

Total distance covered = 20 + 40 + 30 = 90 yds

Time taken = 200 seconds

Average Speed = 90/200 = 0.45 yd/s

Velocity = speed with direction

Hence,

His Velocity = 0.45 yd/s to the left of his starting point.

Answer:

See explanation

Explanation:

Given that the density of the unknown substance is 0.79 g/cm3 and is soluble in water, the possible substances it could be are;

i) t-butanol

ii) ethanol

iii) 2-propanol

iv) acetone

However, the actual identity of the unknown substance can be obtained by carrying out a boiling point test. The four substances listed above have different boiling points. Hence the boiling point of the unknown substance ultimately discloses its identity.

Answer:

Specific Gravity = 0.378

Explanation:

First, we will find the force exerted by the can on the table. This force will be equal to the weight of the can:

Pressure = Force/Area = Weight/Area

Weight = Pressure*Area

where,

Area = πdiameter²/4 = π[(3.1 in)(0.0254 m/1 in)]²/4 = 4.8 x 10⁻³ m²

Weight = (510 N/m²)(4.8 x 10⁻³ m²)

Weight = 2.48 N

Now, the weight is given as:

Weight = mg

2.48 N = m(9.8 m/s²)

m = (2.48 N)/(9.8 m/s²)

m = 0.25 kg

Now, we calculate volume of can:

Volume = (Area)(Height) = (4.8 x 10⁻³ m²)(5.42 in)(0.0254 m/1 in)

Volume = 6.6 x 10⁻⁴ m³

Hence, the density of can will be:

Density of Can = m/Volume = 0.25 kg/6.6 x 10⁻⁴ m³

Density of Can = 378.32 kg/m³

So, the specific gravity of Can will be:

Specific Gravity = Density of Can/Density of Water

Specific Gravity = (378.32 kg/m³)/(1000 kg/m³)

Specific Gravity = 0.378

Answer:

600N

Explanation: