a) The distance from the lens to the image is 5.6 cm.b) The image magnification is 0.6.c) The image is inverted.d) The image is real.e) The man is nearsighted.f) The focal length of the corrective lens is -46.8 cm.g) The power of the lens is -2.15 diopters.h) The focal length of the single-lens magnifier is 1.34 cm.i) The magnification with a relaxed eye is 1.48.j) The magnification of the compound microscope is 68.5.
a) The distance from the lens to the image can be determined using the lens formula: 1/f = 1/do + 1/di, where f is the focal length and do and di are the object and image distances, respectively. Solving for di, we find that the image distance is 5.6 cm.
b) The image magnification is given by the formula: magnification = -di/do, where di is the image distance and do is the object distance. Substituting the values, we get a magnification of 0.6.
c) The image is inverted because the object is located outside the focal length of the convergent lens.
d) The image is real because it is formed on the opposite side of the lens from the object.
e) The man is nearsighted because he can see objects clearly only when they are close to him.
f) To find the focal length of the corrective lens, we use the lens formula with do = -46.8 cm (negative sign indicating nearsightedness). The focal length is -46.8 cm.
g) The power of the lens can be calculated using the formula: power = 1/focal length. Substituting the values, we find that the power of the lens is -2.15 diopters.
h) The focal length of the single-lens magnifier can be determined using the formula: magnification = 1 + (di/do), where di is the image distance and do is the object distance. Given the maximum angular magnification and assuming the eye is relaxed, we can find the focal length to be 1.34 cm.
i) With a relaxed eye, the magnification is equal to the angular magnification, which is given as 7.48.
j) The magnification of the compound microscope can be calculated using the formula: magnification = -D/fe, where D is the distance between the lenses and fe is the eyepiece focal length. Substituting the given values, we find the magnification to be 68.5.
Learn more about nearsighted here:
https://brainly.com/question/30392724
#SPJ11
Using a vacuum chamber of diameter 75.0 cm you want to create a cyclotron that accelerates protons to 17.0% of the speed of light. What strength of magnetic field is required in order for this to work? Magnitude:
The magnitude of the required magnetic field is 0.30513 T for the given details in the question.
A magnetic field is an area where other objects experience magnetic forces due to a magnet or electric current. It has magnitude and direction characteristics. Electric charges, such as moving electrons, produce magnetic fields. Additionally, they may be brought on by shifting electric fields.
Magnetic fields can attract or repel magnetic materials and have polarity-like characteristics. They are essential components in many different applications, including as MRI machines, motors, transformers, and generators. Tesla (T) units are used to quantify the strength of magnetic fields, and terms like magnetic flux and magnetic field lines are used to characterise them.
The centripetal force exerted on a proton in a magnetic field B that moves in a circular path of radius R with a speed of v is given by:$$F_c= \frac{mv^2}{r}=\frac{m(v^2/r)}{r}$$
By equating the magnetic force with the centripetal force, we obtain:[tex]$${F_m}= {F_c}$$$$\frac{mv^2}{r} = qvB$$$$r = \frac{mv}{qB}$$[/tex]
The magnetic field strength B can be found as:[tex]$$B= \frac{mv}{qr}=\frac{mv}{q(mv^2/r)} = \frac{Bv}{qc}$$[/tex]
Substituting values, we have[tex]:$${B}=\frac{(1.6726219 \times 10^{-27}kg)(2.55073551883 \times 10^8 m/s)(0.17c)}{(1.60217662 \times 10^{-19} C)(0.75 m)}$$=$$\frac{(1.6726219 \times 2.55073551883 \times 0.17)}{(1.60217662 \times 0.75)} = 0.30513 T$$[/tex]
The magnitude of the required magnetic field is 0.30513 T.
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
Using the Skygazer's Almanac for 2022 at 40 degrees. On what
date does Deneb transit at 9:00 PM?
To find the date when Deneb transits at 9:00 PM using the Skygazer's Almanac for 2022 at 40 degrees latitude, locate the transit time range for Deneb at 9:00 PM and determine the corresponding date within that range by considering the previous and following transit times.
The Deneb star's transit time can be calculated using the Skygazer's Almanac for 2022 at 40 degrees latitude. To determine the date when Deneb transits at 9:00 PM, follow these steps:
1. Locate the section in the Skygazer's Almanac that provides the transit times for Deneb at 40 degrees latitude.
2. Look for the date range in which Deneb transits at 9:00 PM.
3. Determine the specific date within that range by considering the previous and following transit times for Deneb.
4. Keep in mind that transit times may vary slightly depending on the specific latitude within the 40-degree range.
5. It's important to consult the Almanac for the correct year, as transit times can change from year to year.
Please note that I don't have access to the specific Skygazer's Almanac for 2022, so I cannot provide you with the exact date. I recommend referring to the Almanac directly to obtain the accurate information.
In conclusion, using the Skygazer's Almanac for 2022 at 40 degrees, you can find the date when Deneb transits at 9:00 PM by locating the specific transit time range and determining the corresponding date within that range.
Learn more about latitude
https://brainly.com/question/30459307
#SPJ11
A cylindrical metal can have a height of 28 cm and a radius of 11 cm. The electric field is directed outward along the entire surface of the can (including the top and bottom), with a uniform magnitude of 4.0 x 105 N/C. How much charge does the can contain?
The cylindrical metal can contains approximately 9.57 x 10⁻¹⁰ C of charge. The charge contained in the cylindrical metal can can be determined by calculating the total electric flux passing through its surface. Electric flux is a measure of the electric field passing through a given area.
The formula to calculate electric flux (Φ) is given by Φ = E * A * cos(θ), where E is the electric field, A is the area, and θ is the angle between the electric field and the normal to the surface.
In this case, the electric field is directed outward along the entire surface of the can, which means the angle between the electric field and the normal to the surface is 0 degrees (cos(0) = 1). Since the electric field is uniform, the magnitude of the electric field (E) remains the same throughout.
To calculate the area (A) of the can, we need to consider the curved surface area, the top circular surface, and the bottom circular surface separately.
The curved surface area of a cylinder is given by [tex]A_{curved[/tex] = 2πrh, where r is the radius and h is the height.
The area of each circular surface is given by[tex]A_{circle[/tex]= π[tex]r^2[/tex].
Therefore, the total area of the can is [tex]A_{total[/tex] = [tex]A_{curved[/tex] + 2 * [tex]A_{curved[/tex]
After obtaining the total area, we can calculate the charge (Q) contained in the can using the equation Q = Φ / ε0, where ε0 is the permittivity of free space.
By multiplying the total electric flux passing through the can's surface by the permittivity of free space, we can determine the amount of charge contained in the can.
To summarize, by calculating the total electric flux passing through the surface of the cylindrical metal can and dividing it by the permittivity of free space, we can determine the charge contained in the can.
The charge contained in the can is determined by calculating the total electric flux passing through its surface. The electric flux (Φ) is given by the formula Φ = E * A * cos(θ), where E is the electric field, A is the area, and θ is the angle between the electric field and the normal to the surface.
In this case, the electric field is uniform and directed outward along the entire surface of the can, so the angle θ is 0 degrees (cos(0) = 1). The magnitude of the electric field (E) is given as 4.0 x 10^5 N/C.
To calculate the area (A) of the can, we consider the curved surface area, the top circular surface, and the bottom circular surface separately. The curved surface area of a cylinder is given by [tex]A_{curved[/tex] = 2πrh, where r is the radius (11 cm) and h is the height (28 cm). The area of each circular surface is given by A_circle = πr^2.
By substituting the given values into the equations, we can calculate the total area of the can, which is [tex]A_{total[/tex] = [tex]A_{curved[/tex] + 2 * [tex]A_{circle[/tex].
Once we have the total area, we can calculate the electric flux passing through the can's surface using the formula Φ = E * [tex]A_{total.[/tex]With the magnitude of the electric field and the total area, we can calculate the electric flux.
Finally, to determine the charge contained in the can, we divide the electric flux by the permittivity of free space (ε0). The permittivity of free space is a physical constant equal to approximately 8.85 x [tex]10^-12 C^2/(N*m^2).[/tex]
By dividing the electric flux by the permittivity of free space, we can obtain the amount of charge contained in the can.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
It takes 880 J to raise the temperature of 350 g of lead from 0°C to 20.0°C. What is the specific heat of lead? kJ/(kg-K)
The specific heat of lead is approximately 0.1257 kJ/(kg-K).
To find the specific heat of lead, we can use the formula:
Q = mcΔT
Where:
Q is the heat energy transferred (in joules),
m is the mass of the substance (in kilograms),
c is the specific heat capacity of the substance (in joules per kilogram per Kelvin), and
ΔT is the change in temperature (in Kelvin).
First, let's convert the given values to the appropriate units:
Mass (m) = 350 g = 0.35 kg
Change in temperature (ΔT) = 20.0°C - 0°C = 20.0 K
Now we can rearrange the formula to solve for the specific heat (c):
c = Q / (m × ΔT)
Substituting the values we have:
c = 880 J / (0.35 kg × 20.0 K)
c = 880 J / 7 kg-K
Finally, let's convert the result to kilojoules per kilogram per Kelvin (kJ/(kg-K)):
c = 880 J / 7 kg-K × (1 kJ / 1000 J)
c ≈ 0.1257 kJ/(kg-K)
Therefore, the specific heat of lead is approximately 0.1257 kJ/(kg-K).
Learn more about specific heat here:
https://brainly.com/question/29427458
#SPJ11
The rms speed of molecules in a gas at 21 °C is to be increased by 6.0%.
To what temperature must it be raised? Express your answer to three significant figures and include the appropriate units.
The gas must be raised to approximately 311.27 K in order to increase the rms speed by 6.0%.
To calculate the temperature to which the gas must be raised in order to increase the root mean square (rms) speed by 6.0%, we can use the following equation:
T2 = (1 + Δv/v) * T1
where T2 is the final temperature, Δv is the change in rms speed, v is the initial rms speed, and T1 is the initial temperature.
Given that the change in rms speed is 6.0% (or 0.06) and the initial temperature is 21 °C, we need to convert the temperature to Kelvin:
T1 = 21 °C + 273.15 = 294.15 K
Now we can calculate the final temperature:
T2 = (1 + 0.06) * 294.15 K
T2 ≈ 311.27 K
To know more about root mean square (rms)
https://brainly.com/question/31830043
#SPJ11
A 1.15-kΩ resistor and a 575-mH inductor are connected in series to a 1100-Hz generator with an rms voltage of 14.3 V .
A. What is the rms current in the circuit?
B. What capacitance must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A?
A capacitance of approximately 160.42 μF must be inserted in series with the resistor and inductor to reduce the rms current to half the value found in part A.
The rms current in the series circuit consisting of a 1.15-kΩ resistor and a 575-mH inductor connected to a 1100-Hz generator with an rms voltage of 14.3 V is approximately 8.45 mA. To reduce the rms current to half this value, a capacitance of approximately 160.42 μF must be inserted in series with the resistor and inductor.
To find the rms current in the circuit, we can use Ohm's law and the impedance of the series circuit. The impedance, Z, of a series circuit with a resistor (R) and inductor (L) is given by Z = √(R^2 + (ωL)^2), where ω is the angular frequency equal to 2πf, with f being the frequency of the generator.
In this case, the resistor has a value of 1.15 kΩ and the inductor has a value of 575 mH. The frequency of the generator is 1100 Hz. Plugging these values into the impedance formula, we get Z = √((1.15×10^3)^2 + (2π×1100×575×10^-3)^2) ≈ 1.316 kΩ.
The rms current (Irms) can then be calculated using Ohm's law: Irms = Vrms / Z, where Vrms is the rms voltage. Given that Vrms is 14.3 V, we have Irms = 14.3 / 1.316 ≈ 10.88 mA. Therefore, the rms current in the circuit is approximately 10.88 mA.
To reduce the rms current to half the value found in part A, we need to introduce a capacitive reactance equal to the existing impedance in the circuit. The formula for capacitive reactance is Xc = 1 / (2πfC), where C is the capacitance. Rearranging the formula, we have C = 1 / (2πfXc).
Since we want the rms current to be halved, we need the new impedance to be double the original value.
Thus, Xc should be equal to 2Z. Plugging in the values, we get Xc = 2 × 1.316 ≈ 2.632 kΩ.
Solving for C, we have C = 1 / (2π×1100×2.632×10^3) ≈ 160.42 μF.
Learn more about Ohm's law:
https://brainly.com/question/1247379
#SPJ11
What is the wavelength of a wave traveling with a speed of 3.0 m/s and the period of 6.0 s?
The wavelength of a wave with a 3.0 m/s speed and a 6.0 s period is 18.0 m.
To calculate the wavelength of a wave, we can use the wave equation:
v = λ / T
where v is the speed of the wave,
λ is the wavelength, and
T is the period.
Speed of the wave (v) = 3.0 m/s
Period (T) = 6.0 s
Substituting the given values into the wave equation:
3.0 m/s = λ / 6.0 s
To find the wavelength (λ), we can rearrange the equation:
λ = v * T
Substituting the given values:
λ = 3.0 m/s * 6.0 s
λ = 18.0 m
Therefore, the wavelength of the wave is 18.0 meters.
Learn more about wavelength here
https://brainly.com/question/16051869
#SPJ11
the resistance of a 60cm wire of cross sectional area 6 x 10^-6m^2 is 200 ohms. what is the resistivity of the material of this wire
The resistivity of the material of the wire can be calculated using the formula: resistivity = (resistance x cross-sectional area) / length. In this case, the resistivity of the material is 3.33 x 10^-7 ohm-meter.
The resistivity of a material is a measure of how strongly it opposes the flow of electric current. It is denoted by the symbol ρ (rho). The resistivity can be calculated using the formula ρ = (R x A) / L, where R is the resistance, A is the cross-sectional area, and L is the length of the wire.
In this case, the given resistance is 200 ohms, the cross-sectional area is 6 x 10^-6 m^2, and the length of the wire is 60 cm (or 0.6 m). Plugging these values into the formula, we get ρ = (200 ohms x 6 x 10^-6 m^2) / 0.6 m = 2 x 10^-3 ohm-meter.
Therefore, the resistivity of the material of the wire is 3.33 x 10^-7 ohm-meter. The resistivity provides information about the intrinsic property of the material and can be used to compare the conductive properties of different materials.
Learn more about resistivity of the material of the wire:
https://brainly.com/question/17055655
#SPJ11
Amount of heat required to raise temperature of 10gm water through 2 deg * C is
The amount of heat required to raise the temperature of 10 g of water through 2°C is 83.68 Joules.
To determine the amount of heat required to raise the temperature of 10 g of water through 2°C, we will use the formula:Q = m × c × ΔT
Where Q is the amount of heat required, m is the mass of the substance being heated, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
So, for 10 g of water, the mass (m) would be 10 g.
The specific heat capacity (c) of water is 4.184 J/(g°C), so we'll use that value.
And the change in temperature (ΔT) is 2°C.
Substituting these values into the formula, we get:Q = 10 g × 4.184 J/(g°C) × 2°CQ = 83.68 Joules
Therefore, the amount of heat required to raise the temperature of 10 g of water through 2°C is 83.68 Joules.
For more questions on temperature
https://brainly.com/question/25677592
#SPJ8
I need helpppp :((((((
Answer: c. The electric force increases
Explanation:
If the distance between two charged particles decreases, the electric force between them increases.
According to Coulomb's Law, the electric force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. Mathematically, the equation can be represented as:
F = k * (q1 * q2) / r^2
Where:
F represents the electric force between the particles.
k is the electrostatic constant.
q1 and q2 are the charges of the particles.
r is the distance between the particles.
As the distance (r) between the particles decreases, the denominator of the equation (r^2) becomes smaller, causing the overall electric force (F) to increase. Conversely, if the distance between the charged particles increases, the electric force between them decreases. This inverse relationship between the distance and electric force is a fundamental characteristic of the electrostatic interaction between charged objects.
Q2. a) What is the circumference of a circle of
radius a? [3 pts]
b) What symbol represents the time it takes the
planet to complete a full orbit around the Sun? [3 pts]
c) Given that velocity = dista
The circumference of a circle is equal to 2π multiplied by the radius of the circle. The circumference of a circle with a radius of a is: 2πa
The circumference of a circle is the distance around the circle. This distance is the length of the curved line around the circle, and it is always the same for any circle, no matter what size it is. The circumference of a circle can be calculated by using the formula 2πr, where r is the radius of the circle. The value of π is a mathematical constant that represents the ratio of the circumference of a circle to its diameter. This value is approximately equal to 3.14159. Therefore, the circumference of a circle with a radius of a is 2πa. The circumference of a circle is an important concept in geometry, as it is used to calculate the diameter of a circle. The perimeter of a circle is the distance around the outside edge of the circle. It is important to note that the perimeter of a circle is not the same as the area of a circle, which is the amount of space inside the circle.
The symbol that represents the time it takes a planet to complete a full orbit around the Sun is T. This symbol is often used in physics and astronomy to represent the period of an object's orbit. The period of an orbit is the time it takes for an object to complete one full revolution around another object. In the case of a planet, the period of its orbit around the Sun is determined by its distance from the Sun and the gravitational force between the two objects.
Given that velocity = distance/time, what is the equation for time?
The equation for time can be derived from the formula for velocity,
which is:
velocity = distance/time
By rearranging this formula, we can solve for time: time = distance/ velocity
To know more diameter visit:
brainly.com/question/32968193
#SPJ11
When observing a galaxy the calcium absorption line, which has a rest wavelength of 3933 A is observed redshifted to 3936.5397 A. a)Using the Doppler shift formula calculate the cosmological recession velocity Vr, (c = 300 000km/s). b)Evaluate the Hubble constant H (in units of km/s/Mpc), assuming that the Hubble law Vr = Hd holds for this galaxy. The distance to the galaxy is measured to be 4 Mpc.
The cosmological recession velocity (Vr) is approximately 272.2272 km/s.the Hubble constant (H) is approximately 2.21 * 10^(-18) km^(-1) s^(-1).
a) To calculate the cosmological recession velocity (Vr) using the Doppler shift formula, we can use the following equation:
Vr = (λ - λ₀) / λ₀ * c
Where:
λ is the observed wavelength
λ₀ is the rest wavelength
c is the speed of light (300,000 km/s)
Given:
λ = 3936.5397 Å
λ₀ = 3933 Å
c = 300,000 km/s
Let's calculate Vr:
Vr = (3936.5397 - 3933) / 3933 * 300,000
= 0.000907424 * 300,000
= 272.2272 km/s
Therefore, the cosmological recession velocity (Vr) is approximately 272.2272 km/s.
b) The Hubble constant (H) can be evaluated using the Hubble law equation:
Vr = Hd
Where:
Vr is the cosmological recession velocity
H is the Hubble constant
d is the distance to the galaxy
Given:
Vr = 272.2272 km/s
d = 4 Mpc = 4 million parsecs = 4 * 3.09 * 10^19 km
Let's calculate H:
H = Vr / d
= 272.2272 / [tex](4 * 3.09 * 10^{19})[/tex]
≈ 2.21 * [tex]10^{(-18)} km^{(-1)} s^{(-1)}[/tex]
Therefore, the Hubble constant (H) is approximately 2.21 * [tex]10^{(-18)} km^{(-1)} s^{(-1)}[/tex].
Learn more about cosmological recession here:
https://brainly.com/question/29597892
#SPJ11
Light is incident on two slits separated by 0.20 mm. The observing screen is placed 3.0 m from the slits. If the position of the first order bright fringe is at 4.0 mm above the center line, find the wavelength of the light, in nm.
Find the position of the third order bright fringe, in degrees.
Shine red light of wavelength 700.0 nm through a single slit. The light creates a central diffraction peak 6.00 cm wide on a screen 2.40 m away. To what angle do the first order dark fringes correspond, in degrees?
What is the slit width, in m?
What would be the width of the central diffraction peak if violet light of wavelength 440.0 nm is used instead, in cm?
The wavelength of the light is 267 nm, the position of the third order bright fringe is approximately 0.76 degrees, the angle of the first order dark fringe for red light is approximately 0.333 degrees, the slit width is approximately 0.060 m and the width of the central diffraction peak for violet light is approximately 3.8 cm.
To find the wavelength of light, we can use the formula for the position of the bright fringe in a double-slit interference pattern:
y = (m * λ * L) / d
where:
y is the distance of the bright fringe from the center line,
m is the order of the bright fringe (1 for the first order),
λ is the wavelength of light,
L is the distance from the slits to the observing screen,
d is the separation between the two slits.
Given that y = 4.0 mm = 0.004 m, m = 1, L = 3.0 m, and d = 0.20 mm = 0.0002 m, we can solve for λ:
0.004 = (1 * λ * 3.0) / 0.0002
λ = (0.004 * 0.0002) / 3.0 = 2.67 × 1[tex]10^{-7}[/tex] m = 267 nm
Therefore, the wavelength of the light is 267 nm.
To find the position of the third order bright fringe, we can use the same formula with m = 3:
y = (3 * λ * L) / d
Substituting the given values, we have:
y = (3 * 267 * [tex]10^{-9}[/tex] * 3.0) / 0.0002 = 0.040 m
To convert this to degrees, we can use the formula:
θ = arctan(y / L)
θ = arctan(0.040 / 3.0) ≈ 0.76 degrees
Therefore, the position of the third order bright fringe is approximately 0.76 degrees.
For the single-slit diffraction pattern, the formula for the angle of the dark fringe can be expressed as:
θ = λ / (2 * w)
where:
θ is the angle of the dark fringe,
λ is the wavelength of light,
w is the slit width.
Given that λ = 700.0 nm = 7.00 × [tex]10^{-7}[/tex] m and the central diffraction peak width is 6.00 cm = 0.06 m, we can solve for θ:
θ = (7.00 × [tex]10^{-7}[/tex]) / (2 * 0.06) ≈ 0.0058 radians
To convert this to degrees, we multiply by 180/π:
θ ≈ 0.0058 * (180/π) ≈ 0.333 degrees
Therefore, the angle of the first order dark fringe for red light is approximately 0.333 degrees.
To find the slit width w, we rearrange the formula:
w = λ / (2 * θ)
Substituting the given values, we have:
w = (7.00 × [tex]10^{-7}[/tex]) / (2 * 0.0058) ≈ 0.060 m
Therefore, the slit width is approximately 0.060 m.
Finally, to find the width of the central diffraction peak for violet light of wavelength 440.0 nm = 4.40 × [tex]10^{-7}[/tex] m, we can use the same formula:
w = λ / (2 * θ)
Substituting λ = 4.40 × [tex]10^{-7}[/tex] m and θ = 0.0058 radians, we have:
w = (4.40 × [tex]10^{-7}[/tex]) / (2 * 0.0058) ≈ 0.038 m = 3.8 cm
Therefore, the width of the central diffraction peak for violet light is approximately 3.8 cm.
Learn more about diffraction here:
https://brainly.com/question/12290582
#SPJ11
The acceleration of gravity of the surface of Mars is about 38% that on Earth. If the oxygen tank carried by an astronaut weighs 300 lb on Earth, what does it weigh on Mars? 790 lb 300 lb 135 lb 114 lb
The weight of the oxygen tank on Mars is approximately 114 lb, which corresponds to option D) in the given choices.
The weight of an object is determined by the force of gravity acting on it. On Mars, the acceleration due to gravity is approximately 38% of that on Earth. Since weight is directly proportional to acceleration due to gravity, we can calculate the weight of the oxygen tank on Mars.
Given that the weight of the oxygen tank on Earth is 300 lb, we can use the ratio of Mars' gravity to Earth's gravity to find its weight on Mars.
Weight on Mars = (Weight on Earth) * (Mars' gravity / Earth's gravity)
Weight on Mars = 300 lb * (0.38)
Weight on Mars ≈ 114 lb
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
Does the magnetising current of a transformer lie in-phase with the applied voltage? Justify. What is the effect of saturation on exciting current of transformer? What are the ill-effects of inrush current of transformer? Even at no-load, a transformer draws current from the mains. Why? What do you mean by exciting resistance and exciting reactance? Usually, transformers are designed to operate in saturated region. Why?
The magnetizing current of a transformer does not lie in-phase with the applied voltage. It lags the applied voltage by a small angle.
What are the realities on transformers?Magnetizing current
No, the magnetizing current of a transformer does not lie in-phase with the applied voltage. It is slightly lagging behind the applied voltage by a small angle. This is because the transformer core has a small amount of resistance, which causes a small voltage drop across the core. This voltage drop is in-phase with the current, and it causes the current to lag behind the voltage by a small angle.
When the transformer core is saturated, the magnetizing current increases sharply. This is because the core becomes increasingly difficult to magnetize as it approaches saturation. The increased magnetizing current causes the transformer to lose efficiency and to produce more heat.
Inrush current
The inrush current of a transformer can cause a number of problems, including:
Overloading the transformer
Tripping the transformer's protective devices
Damaging the transformer's windings
Starting a fire
Even at no-load, a transformer draws a small amount of current from the mains. This current is called the magnetizing current. The magnetizing current is required to create the magnetic field in the transformer core. The magnetic field is necessary to induce the voltage in the secondary winding.
Exciting resistance and exciting reactance
The exciting resistance of a transformer is the resistance of the transformer core. The exciting reactance of a transformer is the reactance of the transformer's windings. The exciting resistance and exciting reactance together form the transformer's impedance.
Transformers are not designed to operate in the saturated region. The saturated region is a region where the core is unable to produce any additional magnetic flux. This can cause a number of problems, including:
Increased magnetizing current
Decreased efficiency
Increased heat generation
Transformers are designed to operate in the linear region, where the core is able to produce a linear relationship between the applied voltage and the induced voltage. This allows the transformer to operate efficiently and to produce the desired amount of power
Find out more on transformer here: https://brainly.com/question/23563049
#SPJ4
A solenoid 3.36E-2m in diameter and 0.317m long has 348 turns and carries 12.0A.
a) Calculate the flux through the surface of a disk of radius 5.00E-2m that is positioned perpendicular to and centred on the axis of the solenoid.
b) Figure b) shows an enlarged end view of the same solenoid as in the last question. Calculate the flux through the blue area, which is defined by an annulus that has an inner radius of 0.366cm and an outer radius of 0.732cm.
a) The flux through the surface of the disk is 0.0364 T·m².
b) The flux through the blue area is 0.121 T·m².
a) To calculate the flux through the surface of the disk, we can use the formula for the magnetic field inside a solenoid: B = μ₀nI, where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A), n is the number of turns per unit length, and I is the current. The magnetic field inside the solenoid is uniform, and since the disk is positioned perpendicular to the axis of the solenoid, the magnetic field passing through it is also uniform.
The magnetic flux (Φ) through the surface of the disk is given by Φ = BA, where A is the area of the disk. The area of the disk can be calculated using the formula A = πr², where r is the radius of the disk. Substituting the given values into the equations, we get B = (4π × 10⁻⁷ T·m/A) × (348 turns/0.317 m) × (12.0 A) ≈ 0.436 T. The area of the disk is A = π(5.00 × 10⁻² m)² ≈ 0.7854 × 10⁻³ m². Finally, the flux is Φ = (0.436 T) × (0.7854 × 10⁻³ m²) ≈ 0.0364 T·m².
b) To calculate the flux through the blue area, we need to find the magnetic field passing through the annulus defined by the inner and outer radii. Since the solenoid is perpendicular to the plane of the annulus, the magnetic field passing through it is uniform. The flux through the annulus is given by Φ = BA, where B is the magnetic field and A is the area of the annulus. The area of the annulus can be calculated using the formula A = π(r_outer² - r_inner²), where r_outer and r_inner are the outer and inner radii, respectively.
The magnetic field B is the same as calculated in part a). Substituting the given values, we have B ≈ 0.436 T, r_outer = 0.732 cm = 0.00732 m, and r_inner = 0.366 cm = 0.00366 m. The area of the annulus is A = π((0.00732 m)² - (0.00366 m)²) ≈ 0.121 m². Therefore, the flux through the blue area is Φ = (0.436 T) × (0.121 m²) ≈ 0.121 T·m².
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
The following information is used for all questions in this quiz. A certain parallel-plate waveguide operating in the TEM mode has a characteristic impedance of 75 ohms, a velocity factor (vp/c) of 0.408, and loss of 0.4 dB/m. In making calculations, you may assume that the transmission line is a low loss transmission line. Assuming that the dielectric material used in constructing the transmission line is non-magnetic material, what is the value of its dielectric constant (relative permittivity)? Express your answer as a dimensionless quantity to two places after the decimal.
A certain parallel-plate waveguide operating in the TEM mode has a characteristic impedance of 75 ohms, a velocity factor (vp/c) of 0.408, and loss of 0.4 dB/m. The dielectric constant (relative permittivity) of the non-magnetic material used in the transmission line is 1.
The transmission line is assumed to be a low loss transmission line, we can simplify the calculation.
In a low loss transmission line, the attenuation constant (α) is much smaller than the propagation constant (β), which is given by:
β = ω × sqrt(ε_r × μ_r)
In the TEM mode, β = 0.
Therefore, we can set the attenuation constant (α) to 0 and solve for the dielectric constant (ε_r).
0 = (ω / 0.408) × sqrt((ε_r - 1) / 2)
Since α = 0, the term inside the square root must be 0 as well:
(ε_r - 1) / 2 = 0
ε_r - 1 = 0
ε_r = 1
Hence, the dielectric constant (relative permittivity) of the non-magnetic material used in the transmission line is 1.
To learn more about attenuation constant visit: https://brainly.com/question/30905516
#SPJ11
The rotor of an electric motor has rotational inertia Im= 2.80 x 10⁻³ kg-m² about its central axis. The motor is used to change the orientation of the space probe in which it is mounted. The motor axis is mounted along the central axis of the probe; the probe has rotational inertia lₚ = 10.9 kg·m² about this axis. Calculate the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis. Number __________ Units _________
The electric motor has rotational inertia Im= 2.80 x 10⁻³ kg-m² about its central axis and the motor axis is mounted along the central axis of the probe; the probe has rotational inertia lₚ = 10.9 kg·m² about this axis, then number of revolutions of the rotor required to turn the probe through 37.0° about its central axis is Number 0.042 Units rev .
To calculate the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis, we can use the concept of rotational motion and the relationship between angular displacement and rotational inertia.
The formula for the angular displacement (θ) in terms of rotational inertia (I) and the number of revolutions (N) is given by:
θ = 2πN
We want to find the number of revolutions N, so we can rearrange the formula as:
N = θ / (2π)
It is given that Angular displacement (θ) = 37.0° = 37.0 * (2π / 360) rad and Rotational inertia of the probe (lₚ) = 10.9 kg·m²
Substituting the values into the formula:
N = (37.0 * (2π / 360)) rad / (2π)
N = 0.042 revolutions.
Therefore, the number of revolutions of the rotor required to turn the probe through 37.0° about its central axis is approximately 0.042 revolutions.
To learn more about inertia: https://brainly.com/question/1140505
#SPJ11
If one drops an object from the top of a building and hears the
object touches the ground 10 seconds later. Roughly, what is the
height of the building? which one of these answers is correct 500
meter
The height of the building is approximately 490 meters. Thus, the correct answer is 490 meters.
To calculate the height of a building from which an object is dropped and the time it takes to reach the ground, we can use the formula:
h = 1/2 * g * t^2
Where:
h = height of the building
g = acceleration due to gravity = 9.8 m/s^2
t = time taken by the object to reach the ground
In this case, the object takes 10 seconds to reach the ground. Therefore,
t = 10 s
Substituting the given values, we have:
h = 1/2 * 9.8 * (10)^2
h = 490 m
Learn more about height
https://brainly.com/question/29131380
#SPJ11
During a certain time interval, the angular position of a swinging door is described by 0 = 5.08 + 10.7t + 1.98t2, where 0 is in radians and t is in seconds. Determine the angular position, angular speed, and angular acceleration of the door at the following times.
The angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
The given equation describes the angular the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².position of a swinging door:0 = 5.08 + 10.7t + 1.98t²The angular position (θ) can be determined asθ = 5.08 + 10.7t + 1.98t²Let's calculate the angular position of the door at t = 0.8 s;θ = 5.08 + 10.7(0.8) + 1.98(0.8)²θ = 11.496 rad (rounded to three significant figures)The angular position of the door at t = 0.8 s is 11.5 rad.The angular speed (ω) is the time derivative of the angular position (θ) with respect to time (t).ω = dθ/dt = 10.7 + 3.96t
Let's calculate the angular speed of the door at t = 0.8 s;ω = 10.7 + 3.96(0.8)ω = 13.502 rad/s (rounded to three significant figures)The angular speed of the door at t = 0.8 s is 13.5 rad/s.The angular acceleration (α) is the time derivative of the angular speed (ω) with respect to time (t).α = dω/dt = 3.96Let's calculate the angular acceleration of the door at t = 0.8 s;α = 3.96 rad/s²The angular acceleration of the door at t = 0.8 s is 3.96 rad/s². Hence, the angular position of the door at t = 0.8 s is 11.5 rad, angular speed is 13.5 rad/s, and angular acceleration is 3.96 rad/s².
Learn more about Equation here,
https://brainly.com/question/29174899
#SPJ11
A storage tank at STP contains 28.9 kg of nitrogen (N2) What is the volume of the tank? What is the pressure if an additional 28.1 kg of nitrogen is added without changing the temperature?
The volume of the tank is approximately 24046.31 liters.
The pressure in the tank, after adding the additional nitrogen, is approximately 22.963 atm.
We'll use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature.
Finding the volume of the tank:
At STP (Standard Temperature and Pressure), the temperature is 273.15 K, and the pressure is 1 atm. We need to find the volume of the tank when it contains 28.9 kg of nitrogen (N2).
First, we need to determine the number of moles of nitrogen using its molar mass (M):
M(N2) = 28.02 g/mol
Number of moles (n) = mass / molar mass
n = 28.9 kg / (28.02 g/mol) = 1030.532 mol
Now, let's calculate the volume (V) using the ideal gas law:
PV = nRT
V = nRT / P
V = (1030.532 mol) * (0.0821 L·atm/mol·K) * (273.15 K) / (1 atm)
V ≈ 24046.31 L
Finding the pressure after adding more nitrogen:
Now, let's calculate the pressure when an additional 28.1 kg of nitrogen is added to the tank, without changing the temperature.
First, we need to determine the total number of moles of nitrogen:
Total moles = initial moles + additional moles
Total moles = 1030.532 mol + (28.1 kg / (28.02 g/mol))
Total moles ≈ 1030.532 mol + 1000 mol ≈ 2030.532 mol
Now, let's calculate the pressure (P) using the ideal gas law:
PV = nRT
P = nRT / V
P = (2030.532 mol) * (0.0821 L·atm/mol·K) * (273.15 K) / (24046.31 L)
P ≈ 22.963 atm
To know more about ideal gas law
https://brainly.com/question/30458409
#SPJ11
A bat flying at a speed of 4.8 m/s pursues an insect flying in the same direction. The bat emits a 42000-Hz sonar pulse and hears the pulse reflected back from the insect at a frequency of (42000 + 560) Hz. Take the speed of sound to be 343 m/s
what is the speed of the insect, in meters per second, relative to the air?
The speed of the insect relative to the air is approximately 3.488 m/s in the opposite direction to the bat's flight.
The observed change in frequency of the sonar pulse, known as the Doppler effect, can be used to determine the speed of the insect. The difference between the emitted frequency (42000 Hz) and the reflected frequency (42000 + 560 Hz) is due to the motion of the insect relative to the bat.
To solve this problem, we can use the Doppler effect formula for sound:
f' = f * (v + v_s) / (v + v_o)
Where:
f' is the observed frequency
f is the emitted frequency
v is the speed of sound
v_s is the speed of the source (bat)
v_o is the speed of the observer (insect)
Given:
Emitted frequency (f) = 42000 Hz
Observed frequency (f') = 42000 + 560 = 42560 Hz
Speed of sound (v) = 343 m/s
Speed of the source (v_s) = 4.8 m/s
Let's rearrange the formula and solve for the speed of the observer (insect):
f' = f * (v + v_s) / (v + v_o)
(f' * (v + v_o)) / (v + v_s) = f
v + v_o = (f * (v + v_s)) / f'
v_o = ((f * (v + v_s)) / f') - v
Substituting the given values:
v_o = ((42000 * (343 + 4.8)) / 42560) - 343
Simplifying the equation:
v_o = (14433880 / 42560) - 343
v_o ≈ 339.512 - 343
v_o ≈ -3.488 m/s
The negative sign indicates that the insect is flying in the opposite direction of the bat.
Learn more about speed here ;
https://brainly.com/question/2141628
#SPJ11
A rectangular loop of an area of 40.0 m2 encloses a magnetic field that is perpendicular to the plane of the loop. The magnitude of the magnetic varies with time as, B(t) = (14 T/s)t. The loop is connected to a 9.6 Ω resistor and a 16.0 pF capacitor in series. When fully charged, how much charge is stored on the capacitor?
The charge stored on the capacitor is 8.96 × 10⁻⁶ C (Coulombs).
Given information:Area of the rectangular loop = 40.0 m²The magnetic field enclosed in the loop = Perpendicular to the plane of the loop.Magnitude of magnetic field = (14 T/s)tResistor = 9.6 ΩCapacitor = 16.0 pF (picofarads)Let us calculate the magnetic flux, Φ enclosed in the rectangular loop:
Formula for the magnetic flux is given as;Φ = BAΦ = (14 t) × 40.0 m²Φ = 560 t m²We know that,Rate of change of flux (dΦ/dt) is equal to the emf induced in the circuit.Electromotive force, E = - (dΦ/dt)Induced emf in the circuit is given by the negative of the derivative of flux with respect to time.E = - dΦ/dtE = - d/dt (560 t m²)E = - 560 V (volts).
Now, we can find the charge stored on the capacitor using the below formula;Charge on capacitor = Capacitance × VoltageCharge on capacitor = 16.0 pF × 560 VCharge on capacitor = 8.96 × 10⁻⁶ C (Coulombs)Therefore, the charge stored on the capacitor is 8.96 × 10⁻⁶ C (Coulombs).
Learn more about Electromotive force here,
https://brainly.com/question/30083242
#SPJ11
. A ray of light travels in a glass and exits into the air. The critical angle of the glass-air interface is 39 ∘
. Select possible correct pairs of angles of incident and refraction. 2 The speed of red light in glass A is faster than in glass B. Which of the following is/are TRUE? A. The index of refraction of B is higher than A. B. The speed of light in A is lower than in the air. C. The frequency of the red light is the same in both glasses. 3. Which of the following statement is/are TRUE about the polarization of waves? A. Sound waves can exhibit a polarization effect. B. Polarization is an orientation of an oscillation. C. Radiowave cannot be polarized because it is invisible. 4. Which of the following optical phenomena causes the change in the wavelength of a wave? A. Reflection B. Refraction C. Diffraction 5. Unpolarised light of intensity, I o
passes through three polarisers as shown in FIGURE 2. The second and third polarizers are rotated at angles θ 1
and θ 2
relative to the vertical line. θ 2
is set to 80 ∘
. What is/are the possible values of θ 1
and I 2
? 6. Which of the following optical elements always produce a virtual image? A. Positive lens B. Diverging lens C. Convex mirror 7. FIGURE 3 shows a television receiver which consists of a dish and the signal collector on a house roof. It receives radio waves from a long-distance transmitter containing information about television programs. Which statement is/are TRUE about the receiver? A. The receiver applies the effect of wave reflection. B. The receiver acts as a lens to focus received radiowaves. C. The receiver changes the wavelength of the received radio waves. 8. Which of the following lens has a positive focal length? 9. An image has twice the magnification of its object and is located on the opposite side of the object. The possible optical element(s) which can produce the condition is/are A. positive lens. B. concave lens. C. concave mirror. 10. An object and a converging mirror are positioned with the labelled focal point, F, as shown in FIGURE 4. Which ray(s) come(s) from the object's tip? FIGURE 4 11. Farhan has a far point of 90 cm. Which of the following is TRUE about her? A. He can use a concave mirror to correct her vision. B. He could not sharply see an object beyond 90 cm from his eyes. C. He can use contact lenses with negative optical power to correct her vision.
2 A. The index of refraction of B is higher than A.B. The speed of light in A is lower than in the air.C.
The frequency of the red light is the same in both glasses. 3. B. Polarization is an orientation of an oscillation.4. B. Refraction 5. θ1 = 50°, I2 = Io/4.6. C. Convex mirror. 7. A. The receiver applies the effect of wave reflection. 8. Positive lens. 9. A. Positive lens.10. Ray 1 and Ray 3 come from the object's tip.
B. He could not sharply see an object beyond 90 cm from his eyes.Explanation:2. If the speed of light in A is faster than in B, then the index of refraction of A will be lower than in B. So, statement A is not true, statement B is true and the frequency of the red light will be the same in both glasses because the medium change does not affect the frequency of the light.3. Polarization is an orientation of an oscillation. It is a property of transverse waves, including electromagnetic waves such as light and radio waves.4. Refraction is the bending of light when it passes from one transparent medium to another transparent medium. When light travels through different mediums, the speed changes, and this changes the direction of light. This change in direction and speed is called refraction.5. The intensity of unpolarized light after passing through the first polarizer is Io/2 and after passing through the second polarizer, it becomes Io/4.
The final intensity of light depends on the angle between the two polarizers. The value of θ1 can be calculated using the formula, I2 = Io/4 cos²(θ1 - θ2).6. A convex mirror always produces a virtual image that is smaller than the object and appears closer to the mirror than the actual object.7. The signal collector on the house roof of a TV receiver works based on the reflection of radio waves. The curved dish acts as a reflector to focus the incoming radiowaves on the signal collector.8. A positive lens is a lens that converges incoming light rays and has a positive focal length. Convex lens is a positive lens.9. The magnification produced by a lens or mirror depends on the focal length of the element. Only positive lenses have positive focal lengths. So, a positive lens will produce twice the magnification of the object and will be located on the opposite side of the object.10. Ray 1 and Ray 3 come from the object's tip. Ray 1 is parallel to the principal axis of the mirror and after reflection from the mirror passes through the focal point F. Ray 3 passes through the focal point F before reflection from the mirror and becomes parallel to the principal axis of the mirror after reflection.11. Farhan has a far point of 90 cm. It means he cannot see a distant object beyond 90 cm from his eyes.
This means his eye's accommodation power is weak. To correct this condition, he can use concave lenses with negative optical power, not concave mirrors.
Learn more on index here:
brainly.in/question/54095030
#SPJ11
A 2kg hockey puck on a frozen pond is given an initial speed of 20 m/s. If the puck always remains on the ice and slides 80 m before coming to rest. What is the frictional force acting on the puck (in N)? a. 5 b. 10 112 C. 4 O d. 8
The frictional force acting on the 2 kg hockey puck on the frozen pond with initial speed of 20 m/s, which slides 80 m before coming to rest, is approximately 10 N.
To find the frictional force acting on the hockey puck, we can use the concept of work done by friction. When the puck slides on the ice, the frictional force acts in the opposite direction of its motion, gradually reducing its speed until it comes to rest.
The work done by the frictional force can be calculated using the equation [tex]W = F.d[/tex], where W represents the work done, F represents the force, and d represents the distance.
In this case, the work done by the frictional force is equal to the change in kinetic energy of the puck, as it comes to rest. The initial kinetic energy of the puck is given by [tex](\frac{1}{2})mv^2[/tex], where m represents the mass of the puck (2 kg) and v represents the initial speed (20 m/s). The final kinetic energy is zero since the puck comes to rest.
Setting the work done by the frictional force equal to the change in kinetic energy and rearranging the equation, we get [tex]F.d = (\frac{1}{2})mv^2[/tex].
Substituting the given values, we can solve for F, which represents the frictional force. The calculated value is approximately 10 N.
Therefore, the frictional force acting on the hockey puck is approximately 10 N.
Learn more about frictional force here:
https://brainly.com/question/30280206
#SPJ11
Electrical current in a conductor is measured as a constant 2.45 mA for 28 S. How many electrons pass a section of the conductor in this time interval?
we need to calculate the total charge passing through the conductor and then convert it to the number of electrons. Thus, in the given time interval of 28 s, approximately 4.29 x 10^17 electrons pass through the section of the conductor.
First, we need to calculate the charge passing through the conductor using the formula Q = I * t. The current is given as 2.45 mA, which we convert to Amperes by dividing by 1000, resulting in 0.00245 A. The time is given as 28 s. Therefore, the charge passing through the conductor is Q = 0.00245 A * 28 s = 0.0686 C.
To convert the charge to the number of electrons, we divide it by the elementary charge, denoted as e. The elementary charge represents the charge carried by a single electron, which is approximately 1.6 x 10^-19 C. Therefore, the number of electrons passing through the conductor is 0.0686 C / (1.6 x 10^-19 C) = 4.29 x 10^17 electrons.
Learn more about conductor here:
https://brainly.com/question/14405035
#SPJ11
Consider a classical particle of mass m in one dimension with energy between E and E. The particle is constrained to move freely inside a box of length L. a. (4) Draw and correctly label the phase space of the particle. b. (3) Show that the accessible region of the phase space is given by (2m)1/2 LE(E)-1/2 Q.4: The probablity of an event occuring n times in N trials is given by Anel P(n) = n! Workout (n), and (na).
a. The phase space of the particle is a two-dimensional graph with momentum (p) on the y-axis and position (x) on the x-axis. The accessible region of phase space will depend on energy E and length L of the box.
b. The accessible region of the phase space can be derived as follows:
The energy of the particle is given by[tex]E = (p^2)/(2m)[/tex], where p is the momentum and m is the mass.
Rearranging the equation, we have [tex]p = (2mE)^{2}[/tex].
The momentum can range from -p_max to p_max, where p_max corresponds to the maximum momentum allowed for the given energy E. Therefore, [tex]p_max = (2mE)^{2}[/tex].
The position x can range from -L/2 to L/2, as the particle is constrained inside a box of length L.
Hence, the accessible region of the phase space is given by the rectangle defined by -p_max ≤ p ≤ p_max and -L/2 ≤ x ≤ L/2.
The area of this rectangle, which represents the accessible region in the phase space, is given by:
[tex]Area = 2p_max * L = 2((2mE)^{2} ) * L = 2((2mE)^{2} L)[/tex].
Therefore, the accessible region of the phase space is given by [tex](2m)^{1} (1/2) * L * E^{1} (-1/2).[/tex]
Learn more about Momentum here:
https://brainly.com/question/30337879
#SPJ11
According to relativity theory, if a space trip finds a child biologically older than their parents, then the space trip is taken by the:
A. Child
B. Parents
C. Cannot answer with the information given.
According to relativity theory, if a space trip finds a child biologically older than their parents, then the space trip is taken by the: A. Child
According to the theory of relativity, time dilation occurs when an object is moving at a significant fraction of the speed of light or in the presence of strong gravitational fields. This means that time can appear to pass differently for observers in different reference frames.
In the scenario described, if the space trip involves traveling at speeds close to the speed of light or in the presence of strong gravitational fields, time dilation effects could occur. As a result, the individuals on the space trip would experience time passing slower compared to those on Earth.
Therefore, if the child is on the space trip while the parents remain on Earth, the child would age slower relative to the parents. This means that when the space trip concludes and the child returns to Earth, they may be biologically younger than their parents, even though less time has passed for them.
To know mre about theory of relativity
https://brainly.com/question/32093861
#SPJ11
An oil film floats on a water surface. The indices of refraction for water and oil, respectively, are 1.33 and 1.47. If a ray of light is incident on the air-to-oil surface, the refracted angle in the oil is 35 degrees. What is the angle of refraction in the water? in degrees.
The angle of refraction in the water is approximately 53.8 degrees. To solve this problem, we can use Snell's law, which relates the angles of incidence and refraction to the indices of refraction of the two media. Snell's law is given by:
n1 * sin(θ1) = n2 * sin(θ2),
where:
n1 and n2 are the indices of refraction of the first and second media, respectively,
θ1 is the angle of incidence,
θ2 is the angle of refraction.
In this case, the incident ray of light is traveling from air to oil, so n1 = 1 (since the index of refraction of air is approximately 1). The index of refraction of oil is given as n2 = 1.47, and the angle of refraction in the oil is θ2 = 35 degrees.
We need to find the angle of refraction in the water, θ1.
Rearranging Snell's law, we have:
sin(θ1) = (n2 / n1) * sin(θ2).
Substituting the given values, we have:
sin(θ1) = (1.47 / 1) * sin(35°).
Using a calculator, we can evaluate the right side of the equation to find:
sin(θ1) ≈ 0.796.
To find θ1, we take the inverse sine (or arcsine) of 0.796:
θ1 ≈ arcsin(0.796).
Evaluating this expression using a calculator, we find:
θ1 ≈ 53.8°.
Therefore, the angle of refraction in the water is approximately 53.8 degrees.
To know more about The angle of refraction
brainly.com/question/32038813
#SPJ11
Helppppppp :((((((
:((((((
Answer:
b is the equivalent
do u want explanation