why is baking powder a substance
Answer:
Baking powder is a dry chemical leavening agent, a mixture of a carbonate or bicarbonate and a weak acid. Because carbon dioxide is released at a faster rate through the acid-base reaction than through fermentation.
Baking powder is a mixture because it contains both sodium hydrogen phosphate and potassium hydrogen tartrate (two different compounds.)
Can someone please help me!!
Explanation:
Corrections
- It should be 45 bromine atoms
- Bromine isn't found abundantly as atoms, rather as diatomic molecules
[tex]Br_2[/tex]
Before should show 2 phosphorus atom and 3 bromine molecules to form 2 phosphorus tribromide
The bond is covalent because both bromine and phosphorus is a non-metal
A hot metal plate at 150°C has been placed in air at room temperature. Which event would most likely take place over the next few minutes? Molecules in both the metal and the surrounding air will start moving at lower speeds. Molecules in both the metal and the surrounding air will start moving at higher speeds. The air molecules that are surrounding the metal will slow down, and the molecules in the metal will speed up. The air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down.
Answer:
last option is correct.
Air molecules surrounding the metal will speed up and metal molecules will slow down
Explanation:
the metal cools when placed in room temperature air which causes surrounding air to heat up.
the speed of molecules slow down for any material which cools and molecules speed increases when any material heats up
the name of the compound made from lithium chloride and oxygen
Answer:
Lithium perchlorate
Explanation:
The compound formed from lithium chloride and oxygen is lithium oxide (Li₂O).
When lithium chloride (LiCl) reacts with oxygen (O₂), they combine to form lithium oxide (Li₂O). In this reaction, each lithium-ion (Li⁺) from lithium chloride combines with an oxygen atom (O) from oxygen gas to form a lithium oxide molecule.
The chemical formula Li₂O indicates that two lithium ions are combined with one oxygen atom in the compound. This is because lithium has a +1 charge, and since there are two lithium ions, their combined charge is +2. Oxygen, on the other hand, has a -2 charge, so one oxygen atom is sufficient to balance the charges and form a neutral compound.
Hence, the name of the compound formed is Li₂O
Learn more about compounds here:
https://brainly.com/question/14117795
#SPJ 2
Will these magnets attract or repel?
Attract
Repel
Answer:
repel, if you stick them together as they are, because the north and south poles are next to each other
Explanation:
Which diagram shows a pair of electrons that have opposite spins?
O1
1
个个
Answer:
the answer is half arrow
What is the mass in grams of 3.45 moles of N?
mass of 1 mole of N is 14g
so mass of 3.45 mole is
3.45 × 14 = 48.3 g
Which is the correct Lewis dot structure of NH2-?
Answer:
A
Explanation:
because it can share and remain with ither electrons
If I have 0.294L of a 2.OM NaOH solution, what will be the concentration if I add 1.824L to the solution?
Answer:
0.32M
Explanation:
Using the following formula;
CaVa = CbVb
Where;
Ca = concentration of acid (M)
Cb = concentration of bass (M)
Va = volume of acid (HCl)
Vb = volume of base (NaOH)
According to this question, the following were given:
Ca = ?
Cb = 2M
Va = 1.824L
Vb = 0.294L
Using CaVa = CbVb
Ca × 1.824 = 0.294 × 2
1.824Ca = 0.588
Ca = 0.588 ÷ 1.824
Ca = 0.32M
Please help .. I’m really stuck
Answer:
See explanation
Explanation:
pOH = -log[OH^-]
pOH =-log[1×10^-4 molL-1]
pOH = 4
pH +pOH =14
pH = 14 -4
pH =11
b) pOH = -log[OH^-]
pOH =-log[4.9×10^-2molL-1]
pOH = 1.31
pH +pOH =14
pH = 14 -1.31
pH =12.69
c)
pH= -log[H^+]
[H^+] = Antilog [-pH]
[H^+] = Antilog [-3]
[H^+] = 1 × 10^-3 molL-1
d) pOH = -log[OH^-]
[OH^-] = Antilog[-pOH]
[OH^-] = Antilog[-10.4]
[OH^-] = 3.98 ×10^-11
[OH^-] [H^+] = 1 × 10^-14
[H^+] = 1 × 10^-14/3.98 ×10^-11
[H^+] =2.5 ×10^-4 MolL^-1
e) A solution of pH 9 is basic because the pH scale is calibrated in such as way that 0-6.9 is acidic, 7 is neutral and 8 - 14 is basic.
f)
[H^+] = number of moles/volume
[H^+] = 0.35 moles/8L
[H^+] = 0.044 MolL^-1
pH = - log [H^+]
pH = -log [0.044 MolL^-1]
pH= 1.36
Please somone help me with a chemistry question brainliest to whoever answers correctly and 20 points
Answer:
258.15 enjoy
Explanation:
The skin has and needs natural oils. Why is it advisable
to wear gloves while working with strong alkalis ?
Answer:
As we know that alkalis react with oil to form soap. As our skin contains oil so when we touch strong alkalis, a reaction takes place and the soapy solution is formed. Hence we should wear gloves.
Answer:
As we know that alkalis react with oil to form soap. As our skin contains oil so when we touch strong alkalis, a reaction takes place and the soapy solution is formed. Hence we should wear gloves.
Explanation:
it from internet
Where can we find what the chemical symbols in a compound mean? Example: 0, C, Na, Li
Answer:
The periodic table
Explanation:
I'm not really sure what your question is. . . I'm assuming this is what you're looking for
What value is closest to the mass of the atom ?
Answer:
mass number
Explanation:
Answer and Explanation: The value closest to the mass of an atom is its mass number. The mass number is the total count of the protons and neutrons in the nucleus of the...
mass number
hope that helped
any of ya'll good at chemistry?????
Answer:
i good at chemistry
Explanation:
not all but i try
The volume of a gas at 5.00 ATM is 3.5 L what is the volume of the gas at 7.00 ATM at the same temperature
A- 2.5 L
B- 5.0 L
C- 10. L
D- 12 L
Answer:
B) 5.0L
Explanation:
Like the Ford F-150 V8 Cyote 5.0L engine
How many moles are in 3.45 g of Na2O?Round your answer to three significant
figures. IN A FINAL EXAM HURRY PLEASE
Answer: There are 0.056 moles present in 3.45 g of [tex]Na_{2}O[/tex].
Explanation:
Given : Mass = 3.45 g
Moles is the mass of substance divided by its molar mass.
Hence, moles of [tex]Na_{2}O[/tex] (molar mass = 61.98 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{3.45 g}{61.98 g/mol}\\= 0.056 mol[/tex]
Thus, we can conclude that there are 0.056 moles present in 3.45 g of [tex]Na_{2}O[/tex].
In a solution containing 21.2 g sodium carbonate in 1.50 L of solution, calculate
the concentration of the sodium and carbonate ions.
Answer:
0.13 molL-1
Explanation:
We must first obtain the number of moles of sodium carbonate as follows;
Number of moles = mass/molar mass
Number of moles = 21.2 g/106 g/mol
Number of moles= 0.2 moles
Number of moles = concentration × volume
Volume = 1.50 L
Concentration = number of moles/volume
Concentration = 0.2 moles/1.5 L
Concentration = 0.13 molL-1
what is a metal ore?
Answer:
metal ores are naturally occurring rocks that contain metals or metal compounds in sufficient amounts to make it worthwhile extracting them
whats the net ionic and total ionic equations? include the ions and states pls:
NiCl2 + Na2CO3 = 2NaCl + NiCO3
Answer:
Total ionic equation = Ni²⁺ + 2Cl⁻¹ + 2Na⁺ + CO₃⁻² → 2Na⁺ + 2Cl⁻¹ + NiCO₃ (s)
Net ionic equation = Ni²⁺ + CO₃⁻² → NiCO₃ (s)
NiCl₂ (aq) + Na₂CO₃ (aq) → 2NaCl (aq) + NiCO₃ (s)
First, we'll need to expand the complete chemical equation into a total ionic equation (to determine whether a chemical is aqueous or solid, use a solubility chart until the rules are memorized).
Ni²⁺ + 2Cl⁻¹ + 2Na⁺ + CO₃⁻² → 2Na⁺ + 2Cl⁻¹ + NiCO₃ (s)
Now, using the total ionic equation, we can find the net ionic equation. In order to do this, we need to cancel out the aqueous solutions that don't form into solids, as they are extraneous.
Ni²⁺ + 2Cl⁻¹ + 2Na⁺ + CO₃⁻² → 2Na⁺ + 2Cl⁻¹ + NiCO₃ (s)
Ni²⁺ + CO₃⁻² → NiCO₃ (s)
I hope this helped!
Which properties make a metal a good material to use for electrical wires?
Answer: it has 2 characteristics and they are conductivity and ductility
Explanation:
The conductivity makes them great conductors of electricity
Answer:
It's B guaranteed;)
Conductivity and ductility
Which of the following combinations of compounds will make a buffer when
mixed?
A. HCl and NaOH
B. CH3COOH and NaCH3Coo
C.HCl and NaBr
D. CH3COOH and NHACI
Answer:
B. CH3COOH and NaCH3COO
Explanation:
CH3COOH and NaCH3COO will make a buffer when mixed.
What is a buffer solution?Buffer solutions resist a change in pH when small amounts of a strong acid or a strong base are added. A solution of acetic acid and sodium acetate CH3COOH + CH3COONa is an example of a buffer that consists of a weak acid and its salt.
What are buffer solutions and their types?Buffers are broadly divided into two types – acidic and alkaline buffer solutions. Acidic buffers are solutions that have a pH below 7 and contain a weak acid and one of its salts. For example, a mixture of acetic acid and sodium acetate acts as a buffer solution with a pH of about 4.75.
Learn more about buffer solutions here https://brainly.com/question/8676275
#SPJ2
Which of the following is not a part of every scientific investigation?
Group of answer choices
Collection of relevant empirical evidence
Using models to understand objects and processes better
Use of logical reasoning
Devising hypothesis, making predictions
Answer:
the correct answer is Group of answer choices
Using models to understand objects and processes better is not part of every scientific investigation while collection of relevant empirical evidence,use of logical reasoning and devising hypothesis, making predictions is a part.
What is hypothesis?Hypothesis can be defined as an assumption which is made for the sake of argument . It is an interpretation of a practical condition for which action needs to be taken.It is defined as a tentative assumption which is made to test logical consequences.It is an antecedent clause of a statement which is conditional.
It is constructed before research. There are six types of hypothesis 1)simple hypothesis 2) complex hypothesis 3) directional hypothesis 4)non-directional hypothesis 5) null hypothesis 6)casual hypothesis
The hypothesis should be clear and precise, it must be specific and way of explanation of hypothesis should be simple.
Learn more about hypothesis,here:
https://brainly.com/question/29519577
#SPJ2
Under what conditions is AG for a reaction always positive?
A block is pulled 0.90 m to the right in 2.4 s. What is the block's average speed to the nearest hundredths of a m/s?
If 9.9L of helium are in a tire at 303k,how many liters will be present at 403k if the pressure is held constant.
Answer:
Final volume, V2 = 13.18 Liters
Explanation:
Given the following data;
Initial volume = 9.9 L
Initial temperature = 303 K
Final temperature = 403 K
To find the final volume, we would use Charles law;
Charles states that when the pressure of an ideal gas is kept constant, the volume of the gas is directly proportional to the absolute temperature of the gas.
Mathematically, Charles' law is given by the formula;
[tex] VT = K[/tex]
[tex] \frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex]
Where;
V1 and V2 represents the initial and final volumes respectively.T1 and T2 represents the initial and final temperatures respectively.[tex] \frac{V1}{T1} = \frac{V2}{T2}[/tex]
Making V2 as the subject formula, we have;
[tex] V_{2}= \frac{V1}{T1} * T_{2}[/tex]
[tex] V_{2}= \frac{9.9}{303} * 403 [/tex]
[tex] V_{2}= 0.0327 * 403 [/tex]
Final volume, V2 = 13.18 Liters
what's the meaning of pH in acids and base
Answer:
pH is a measure of how acidic/basic water is. The range goes from 0 to 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. pH is really a measure of the relative amount of free hydrogen and hydroxyl ions in the water.
2. Measure the length of a page in centimeters to the nearest tenth of a centimeter with the metric edge of a ruler. Note that nine lines divide the space between each centimeter into 10 millimeters.
The page is ____27.5____ cm long
58
Explanation:
ccause that is how long it is
According to the Law of Conservation of Mass, the total
moles of reactants in a balanced chemical equation is...?
O always equal to the total moles of the products.
sometimes more or sometimes less than the total moles of the products.
O always more than the total moles of the products.
O always less than the total moles of the products.
Answer:
Always equal to the total moles of the products.
Explanation:
The law of conservation of mass states that mass in an isolated system is neither created nor destroyed by chemical reactions or physical transformations. According to the law of conservation of mass, the mass of the products in a chemical reaction equal to the mass of the reactants.
Give me formula for
1)Aluminium chloride
2) Copper sulphate
3) Zinc Nitrate
3) Ammonium Carbonate
Answer:
1. AlCl₃
2. CuSO4
3. Zn(NO₃)₂
4. (NH4)2CO3