a polluted lake is 0.300 μg (micrograms) per liter of water, what is the total mass of mercury in the lake, in kilograms, if the lake has a surface area of 15.0 square miles and an average depth of 27.0 feet?

Answer:

-1.6 × 10⁻⁹ z

Explanation:

To attempt this type of question, we need to first divide each charge present in the question with the smallest one.

i.e.

[tex]A = \dfrac{-4.8 \times 10^{-9}}{-4.8 \times 10^{-9}}= 1[/tex]

[tex]B = \dfrac{-9.6 \times 10^{-9}}{-4.8 \times 10^{-9}}= 2[/tex]

[tex]C= \dfrac{-6.4 \times 10^{-9}}{-4.8 \times 10^{-9}}= 1.33[/tex]

[tex]D= \dfrac{-12.8 \times 10^{-9}}{-4.8 \times 10^{-9}}= 2.67 \simeq 3[/tex]

The next thing to do is to multiply each obtained value with the highest integer

A = 1 × 3 = 3

B = 2 × 3 = 6

C = 1.33 × 3 = 3.99

D = 3 × 3 = 9

Finally, we divide each charge by the result from above.

[tex]A = \dfrac{-4.8 \times 10^{-9}}{3}= -1.6 \times 10^{-9}[/tex]

[tex]B = \dfrac{-9.6 \times 10^{-9}}{6}= -1.6\times 10^{-9}[/tex]

[tex]C= \dfrac{-6.4 \times 10^{-9}}{3.99}= -1.6\times 10^{-9}[/tex]

Thus, we can therefore easily conclude that the charge in zorgs (z) is:

-1.6 × 10⁻⁹ z

Explanation:

57.3ml

we use Charles's law

to solve the question

Answer:

[tex]\boxed {\boxed {\sf 225 \ mL}}[/tex]

Explanation:

The temperature and volume of the gas are changing, so we use Charles's Law. This states the temperature of a gas is directly proportional to the volume of a gas. The formula is:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

The original volume is unknown. The new volume is 75 milliliters.

The gas is cooled from 150 Kelvin to 50 Kelvin, so the original temperature is 150 K and the new temperature is 50 K.

We know that:

Substitute the values into the formula.

[tex]\frac {V_1}{150 \ K}=\frac{ 75 \ mL}{50 \ K}[/tex]

Since we are solving for the original volume, we must isolate the variable V₁.

It is being divided by 150 K. The inverse of division is multiplication, so we multiply both sides by 150 K.

[tex]150 \ K *\frac {V_1}{150 \ K}=\frac{ 75 \ mL}{50 \ K}* 150 \ K[/tex]

[tex]V_1=\frac{ 75 \ mL}{50 \ K}* 150 \ K[/tex]

The units of Kelvin (K) cancel.

[tex]V_1= \frac{ 75 \ mL}{50 }* 150[/tex]

[tex]V_1=1.5 * 150 \ mL[/tex]

[tex]V_1= 225 \ mL[/tex]

The original volume is 225 milliliters.

Answer:

5 and the rest are all set to the same date on your list as the other one to get you a list on for a your special first year week and with a special holiday party holiday

Explanation:

Sorry desperate for points

Solution :

The equation is :

[tex]$HA (aq) + NaOH(aq) \rightleftharpoons NaA(aq) + H_2O(l)$[/tex]

The number of the moles of HA os 0.00285, and the volume is 25 mL.

15 mL of the 0.0950 M NaOH is added.

The total volume of a solution is V = 25 mL + 15  mL = 40 mL

The pH of the solution is 6.50

Calculating the [tex]K_a[/tex] of HA

[tex]$HA(aq) \rightleftharpoons A^-(aq)+H^+$[/tex]

[tex]K_a=\frac{[A^-].[H^+]}{[HA]}[/tex]

Let s calculate the concentration of HA and NaOH

[tex]$[HA] = \frac{^nH_A}{V}$[/tex]

        [tex]$=\frac{0.00285 \ mol}{0.04 \ L}$[/tex]

       = 0.07125 M

[tex]$[NaOH]= \frac{0.015L \times 0.0950 M}{V}$[/tex]

            [tex]$=\frac{0.001425 mol}{0.04L}$[/tex]

           = 0.0356 M

                                      [tex]$HA(aq) \ \ + \ \ NaOH(aq) \ \ \rightleftharpoons NaA(aq) \\ + \ \ H_2O(aq)$[/tex]

Initial conc. (M)            0.07125 M       0.0356 M            0 M

Change in conc. (M)   -0.0356 M       -0.0356 M        + 0.0356 M

Equilibrium conc. (M)   0.03565 M        0 M                0.0356 M

Therefore, the concentration of HA and the NaA at the equilibrium are [HA] = 0.03565 M and [NaA]= 0.0356 M

0.0356 M of NaA dissociates completely into 0.0356 M [tex]Na^+[/tex] and 0.0356 M [tex]A^-[/tex]

Now for [tex][H^+][/tex]

[tex]$[H^+] = 10^{-pH}$[/tex]

       [tex]$=10^{-6.5}$[/tex]

       [tex]$=3.16 \times 10^{-7}$[/tex]

Calculating the value of [tex]K_a[/tex],

[tex]K_a=\frac{[A^-].[H^+]}{[HA]}[/tex]

     [tex]$=\frac{0.0356 \times 3.16 \times 10^{-7}}{0.03565}$[/tex]

     [tex]$=3.16\times 10^{-7}$[/tex]

Therefore the the value of [tex]K_a[/tex] for the unknown acid is [tex]$3.16\times 10^{-7}$[/tex].

The more finely divided the solid is, the faster the reaction happens. A powdered solid will normally produce faster reaction than if the same mass is present as a single lump. The powdered solid has a greater surface than the single lump

Explanation:

Mark as brainlist

Answer:

Which language is this???

Answer

• Silver

• copper

Answer: The instantaneous rate of formation of HBr at 50 s is [tex]1.4\times 10^{-2}M/s[/tex]

Explanation:

From the graph,

Initial rate of the [tex]Br_2[/tex] = 1.0 M

Time when the concentration of [tex]Br_2[/tex] is 0.5 M (half the concentration ) = 60 sec

For first order reaction:

Calculating rate constant for first order reaction using half life:

[tex]t_{1/2}=\frac{0.693}{k}[/tex] .....(1)

[tex]t_{1/2}[/tex] = half life period = 60 s

k = rate constant = ?

Putting values in equation 1:

[tex]k=\frac{0.693}{60s}\\\\k=0.01155s^{-1}[/tex]

For the given chemical reaction:

[tex]H_2(g)+Br_2(g)\rightarrow 2HBr(g)[/tex]

Rate of the reaction = [tex]-\frac{\Delta [Br_2]}{\Delta t}=\frac{1}{2}\frac{\Delta [HBr]}{\Delta t}[/tex]

Negative sign represents the disappearance of the reactants

From the above expression:

[tex]k[Br_2]=-\frac{\Delta [Br_2]}{\Delta t}=\frac{1}{2}\frac{\Delta [HBr]}{\Delta t}[/tex]

At 50 seconds, [tex][Br_2]=0.6 M[/tex]

Plugging values in above expression, we get:

[tex]\frac{1}{2}\frac{\Delta [HBr]}{\Delta t}=0.01155\times 0.6\\\\\frac{\Delta [HBr]}{\Delta t}=2\times 0.01155\times 0.6=0.01386=1.4\times 10^{-2}M/s[/tex]

Hence, the instantaneous rate of formation of HBr at 50 s is [tex]1.4\times 10^{-2}M/s[/tex]

Answer:

0.016 M

Explanation:

Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:

Molarity (M) = number of moles (n) ÷ volume (V)

According to this question, the mass of KCl was given to be 0.72 grams and the volume of water as 600 mL.

Using mole = mass/molar mass to convert mass of KCl to moles

Molar mass of KCl = 39 + 35.5 = 74.5g/mol

mole = 0.72g ÷ 74.5g/mol

mole = 0.00966mol

Volume of water = 600mL = 600/1000 = 0.600L

Molarity, M = 0.00966 ÷ 0.600

Molarity of KCl solution = 0.016 M

Answer:

NH3 is the base and NH4Cl is the salt.

Explanation:

Hello there!

In this case, according to the given information, it is possible for us to rewrite the chemical equation and thus obtain:

[tex]NH_3+HCl\rightarrow NH_4Cl[/tex]

Whereas it is possible to notice that ammonia, NH3, received the hydrogen ions from HCl to form NH4 ions and Cl ions; in such a way, we infer that NH3 is the base and NH4Cl is the salt.

Regards!

Answer:

NH3 is the base and NH4Cl is the salt

Explanation:

Answer:

The correct answer is - hard water reacts to form the calcium or magnesium salt of the organic acid of the soap.

Explanation:

Soaps are made up of fatty acids or oils by treating with strong alkali and are salts of sodium and potassium. Hard water, on the other hand, has a high concentration of minerals in comparison to soft water. When hard water and soap are mixed together the salts of the minerals like Ca2+ and Mg2+ ions present in hard water react with fatty acids of the soap.

The sodium salts are changed to the salts of calcium and magnesium which are precipitated to an insoluble substance. The insoluble salts of the calcium or magnesium dirt stick on the clothes thus cleaning ability of soap is reduced.

Protons: charge: +1 // mass: 1 // location: nucleus

Neutrons: charge: 0// mass: 1 // location: nucleus

Electrons: charge: -1// mass: 0// location: orbitals

Answer:

Mass of mercury produced = 2.00 g

Explanation:

At room temperature and pressure, the temperature T = 25° C or 298.15 K while the pressure = 1 atmosphere or 760 mmHg.

Mass of oxide of mercury decomposed at room temperature and pressure = 2.16 g

Volume of oxygen produced = 120 cm³ or 0.12 dm³

One mole of any gas has a volume of 24 dm³ at room temperature and pressure.

Therefore, number of moles of oxygen produced = 0.12 dm³ / 24 dm³/mol = 0.005 moles

Mass of oxygen produced = number of moles × molar mass

Molar mass of oxygen = 32 g/mol

Mass of oxygen produced = 0.005 moles × 32 g/mol = 0.16 g

Thus, mass of mercury produced = mass of mercury oxide decomposed - mass of oxygen produced

Mass of mercury produced = 2.16 g - 0.16 g

Mass of mercury produced = 2.00 g

Answer: This is the hue of mercury if you're looking for it. Mercury reacts with sulphur to generate a crimson hue. In the past, they always used a thermometer.

Explanation:  However, due of its toxicity, individuals have switched to using alcohol in glass thermometers, which work similarly to mercury thermometers.

hope this helped best of luck mate! :) if this helped make sure to mark me Brainliest!

Answer:

D

Explanation:

because product are at the top and reactant are at the bottom also it to the power of the moles in front e.g 2NO it will be to the power of 2 in this case.

hope it make sense :)

3

And then for Fe it should be 4 and for the products it should be 2!!

Answer:

The concentration of the acid, HCl is 0.013 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2HCl + Ca(OH)₂ —> CaCl₂ + 2H₂O

From the balanced equation above,

The mole ratio of the acid, HCl (nₐ) = 2

The mole ratio of base, Ca(OH)₂ (n₆) = 1

Finally, we shall determine the molarity of the HCl. This can be obtained as follow:

Volume of acid, HCl (Vₐ) = 250 mL

Molarity of base, Ca(OH)₂ (M₆) = 0.118 M

Volume of base, Ca(OH)₂ (V₆) = 13.7 mL

Molarity of acid, HCl (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 250 / 0.118 × 13.7 = 2/1

Mₐ × 250 / 1.6166 = 2

Cross multiply

Mₐ × 250 = 1.6166 × 2

Mₐ × 250 = 3.2332

Divide both side by side 250

Mₐ = 3.2332 / 250

Mₐ = 0.013 M

Thus, the concentration of the acid, HCl is 0.013 M

Answer:

17.48

Explanation:

mass=density×volume

= 0.713g/ml × 24.5 ml

= 17.4685

≈ 17.47

Answer:

c. NO2

b. NH3

d. SO4 ^2 -

a. HPO4 ^ 2 -

Explanation:

Acid is a compound which ionizes to produce hydrogen ions. The Ph value for acid is below 7. Base is a compound which ionizes to produce hydroxide ions.  The Ph value for base is above 7. The Conjugate base accepts a proton or releases a hydrogen ion.

Answer:

3.24 mol/L

Explanation:

Given that:

mass of Boron triiodide = 6664 grams

molar mass of BI_3 = 391.52 g/mol

Recall that:

number of moles = mass/molar mass

∴

number of moles = 6664 g /391.52 g/mol

number of moles = 17.02 mol

Also;

Molarity = moles for solute/liter for solution

= 17.02 mol/5.25 L

= 3.24 mol/L

Answer:

A functional group in organic chemistry is an atom or group of atoms that is responsible for the specific properties of an organic compound. Some examples of functional groups include alcohols, alkyl halides, ethers, aldehydes, ketones, amines, carboxylic acids, and esters.

Functional groups also play an important part in organic compound nomenclature; combining the names of the functional groups with the names of the parent organic compounds provides a way to distinguish compounds.

The atoms of a functional group are linked together and to the rest of the compound by covalent bonds. The first carbon atom that attaches to the functional group is referred to as the alpha carbon; the second, the beta carbon; the third, the gamma carbon, etc. Similarly, a functional group can be referred to as primary, secondary, or tertiary, depending on if it is attached to one, two, or three carbon atoms.  

Answer:

See explanation

Explanation:

Number of moles of Copper sulphate = 0.18 M × 6.5/1000= 1.17 × 10^-3 moles of CuSO4

From;

number of moles = mass/molar mass

Molar mass of copper II sulphate = 160g/mol

1.17 × 10^-3 moles = mass/160g/mol

Mass = 1.17 × 10^-3 moles ×160

Mass = 0.187 g

If 1 mole contains 6.02 × 10^23 molecules

1.17 × 10^-3 moles contains 1.17 × 10^-3 moles × 6.02 × 10^23/1 = 7 × 10^20 molecules

From;

C1 V1=C2 V2

0.18 × 6.5 =C2 × 10.5

C2 = 0.18 × 6.5/10.5

C2=0.11 M

CuSO4(aq) + 2NaOH(aq) ----> Cu(OH)2(s) + Na2SO4(aq)

1 mole of CuSO4 yields 1 mole of Cu(OH)2

1.17 × 10^-3 moles of CuSO4 yields 1.17 × 10^-3 moles of Cu(OH)2

Mass of Cu(OH)2 = 1.17 × 10^-3 moles × 98g/mol= 0.11g of Cu(OH)2

Answer:

B porque si :) y eso Jsksjs

Answer:A

Because it's an amino acid and all amino acids are key to any part of your body.

Answer:

be is the answer to your question

Answer:

Density

Explanation:

The mass of an element is the average weight that the isotope of the particular element contains. Its characteristic indicates the amount of substance present in an element.

However, the volume of an element on the other hand is the mole of an element that is contained in a room temperature.

The relation joining both the mass and volume of an element is density.

This is because density showcase the relationship between the mass of an element to space in occupies in terms of volume.

It is given by the formula:

Density = mass/volume

Answer:

18%.0

Explanation:

hipe it helps

pa brainlist

Answer:

Y = 92.5 %

Explanation:

Hello there!

In this case, since the reaction between lead (II) nitrate and potassium bromide is:

[tex]Pb(NO_3)_2+2KBr\rightarrow PbBr_2+2KNO_3[/tex]

Exhibits a 1:2 mole ratio of the former to the later, we can calculate the moles of lead (II) bromide product to figure out the limiting reactant:

[tex]0.125L*0.150\frac{molPb(NO_3)_2}{L} *\frac{1molPbBr_2}{1molPb(NO_3)_2} =0.01875molPbBr_2\\\\0.145L*0.200\frac{molKBr}{L} *\frac{1molPbBr_2}{2molKBr} =0.0145molPbBr_2[/tex]

Thus, the limiting reactant is the KBr as it yields the fewest moles of PbBr2 product. Afterwards, we calculate the mass of product by using its molar mass:

[tex]0.0145molPbBr_2*\frac{367.01gPbBr_2}{1molPbBr_2} =5.32gPbBr_2[/tex]

And the resulting percent yield:

[tex]Y=\frac{4.92g}{5.32g} *100\%\\\\Y=92.5\%[/tex]

Regards!

Answer: Rank in order the strongest to the weakest acid is [tex]CCl_{3}COOH[/tex] >  [tex]CBr_{3}COOH[/tex] >  [tex]CH_{3}COOH[/tex].

Explanation:

More readily a substance is able to donate a hydrogen ion more will be its acidic strength. Hence, stronger will be the acid.

More is the electronegativity of atoms attached to the acid more easily it will donate a proton. Hence, more will be its acidic strength.

Chlorine is more electronegative in nature as compared to bromine. So,

[tex]CCl_{3}COOH[/tex] is more acidic than [tex]CBr_{3}COOH[/tex].

Since there is no electronegative group attached to [tex]CH_{3}COOH[/tex] so it is least acidic than [tex]CCl_{3}COOH[/tex] and [tex]CBr_{3}COOH[/tex].

Thus, we can conclude that rank in order the strongest to the weakest acid is [tex]CCl_{3}COOH[/tex] >  [tex]CBr_{3}COOH[/tex] >  [tex]CH_{3}COOH[/tex].