A plane is heading due west and climbing at the rate of 80 km/hr. If its airspeed is 540 km/hr and there is a wind blowing 80 km/hr to the northwest, what is the ground speed of the plane?

Answers

Answer 1

Answer:

599.245km/hr

Explanation:

A plane is heading due west and climbing at the rate of 80 km/hr. If its airspeed is 540 km/hr and there is a wind blowing 80 km/hr to the northwest, what is the ground speed of the plane?

We solve the above question using vectors

In vector form Air speed is -540i + 0j Wind speed is (-80/√2)i + (80/√2)j

Vector notation wind speed is given as: -56.5685 i + 56.5685j

The vector for the ground speed of the plane =

-540i + 0j -56.5685i + 56.5685j

= -596.56854249i + 56.5685j

The the ground speed of the plane √[(596.56854249)² + (56.5685)²]

= √359094.021081 km/hr

= 599.24454197 km/hr

Approximately

= 599.245km/hr


Related Questions

Light from two lasers is incident on an opaque barrier with a single slit of width 4.0 x 10-5 m. One laser emits light of wavelength 4.0 x 10-7 m and the other is 6.0 x 10-7 m. A screen to view the light intensity pattern is 2.0 m behind the barrier. What is the distance from the center of the pattern to the nearest completely dark spot (dark for both colors)?

Answers

Answer:

y = 6 10⁻² m

Explanation:

This is a diffraction exercise which is described by the expression

          a sin θ = m λ

we can use trigonometry to find the distance from the inside of the screen to the dark point (y)

          tan θ = y / L

angles are very small in diffraction experiments, so we can approximate

          tan θ = sin θ /cos θ = sin θ

          sin θ = y / L

substituting

         a (y / L) = m λ

Let's find the points where the intensity becomes zero

         y = m L λ / a

λ₁ = 4.0 10⁻⁷ m

m = 1

          y = 1 2.0 4.0 10⁻⁷/ 4.0 10⁻⁵

          y = 2 10⁻² m

m = 2

          y = 4 10⁻² m

λ₂ = 6.0 10⁻⁷ m

m = 1

          y = 1 2.0 6.0 10⁻⁷ / 4.0 10⁻⁵

          y = 3 10⁻² m

m = 2

          y = 6 10⁻² m

if we want a point where the two colors are dark, we set the two expressions equal

          y₁ = y₂

          m₁ L  λ₁ / a = m₂ L  λ₂ / a

          m₁/m₂ =  λ₂/λ₁

          m₁ / m₂ = 6 10⁻⁷ / 4 10⁻⁷

          m₁ / m₂ = 1.5

since the quantities m must be integers, the smallest relation that the relation fulfills is

            m₁ = 3

            m₂ = 2

the distance for this destructive interference is

           y = 3 2 4.0 10⁻⁷ / 4.0 10⁻⁵

           y = 6 10⁻² m

this is the first point where the minimum of the two wavelengths coincide

it is the question 12 part okay​

Answers

Answer:

Yeah it's ok I think. Also, I can't see the answer you gave so maybe updating the question would be nice.

So if you fall into icy water your gonna freeze that’s a given but you can stop it if you get out fast and get in a real hot bath and then get a towel on and you get Hypothermia because your body physically can’t take the cold so it decides to freeze your insides until your heart eventually just stops because it’s frozen.

Can I pls have brainliest :)

what happens to the strength of an electromagnet when the voltage in the coils of the solenoid is decreased

Answers

Answer:

Make sure you look at the wording!

Explanation:

if the last word is increased, the answer is increased

if the last word is decreased, the answer is it decreases!

Temporary Wind Turbines-

Answers

Answer:

lol what

Explanation:

If the total mechanical energy of the block spring system is 512 J, what is the amplitude for this oscillation?

Answers

Answer:

A = 2.26 m

Explanation:

Given that,

The total mechanical energy of the block spring system is 512 J

Let the spring constant, k = 200 N/m

We need to find the amplitude for this oscillation. The mechanical energy of the spring mass system is given by :

[tex]E=\dfrac{1}{2}kA^2[/tex]

k is spring constant

[tex]A=\sqrt{\dfrac{2E}{k}} \\\\A=\sqrt{\dfrac{2\times 512}{200}} \\A=2.26\ m[/tex]

So, the amplitude of the oscillation is 2.26 m

The current theory of the structure of the Earth, called plate tectonics, tells us that the continents are in constant motion.
Assume that the North American continent can be represented by a slab of rock 4450 km on a side and 31 km deep and that the rock has an average mass density of 2620 kg/m3.
The continent is moving at the rate of about 1 cm/year.
What is the mass of the continent? Answer in units of kg.
(part 2 of 3)
What is the kinetic energy of the continent? Answer in units of J.
(part 3 of 3)
A jogger (of mass 77 kg) has the same kinetic energy as that of the continent.
What would his speed be? Answer in units of m/s.

Answers

Answer:

1) The mass of the continent is approximately [tex]1.608\times 10^{21}[/tex] kilograms.

2) The kinetic energy of the continent is approximately [tex]8.04\times 10^{16}[/tex] joules.

3) The speed of the 77 kg-jogger would be approximately [tex]45.698\times 10^{6}[/tex] meters per second.

Explanation:

1) The mass of the North American continent can be estimated by using the following formula under the assumption that rock has an uniform density:

[tex]m = \rho \cdot L^{2}\cdot h[/tex] (1)

Where:

[tex]m[/tex] - Mass of the continent, measured in kilograms.

[tex]\rho[/tex] - Average density of the rock, measured in kilograms per cubic meter.

[tex]L[/tex] - Side of the continent, measured in meters.

[tex]h[/tex] - Depth of the continent, measured in meters.

If we know that [tex]\rho = 2620\,\frac{kg}{m^{3}}[/tex], [tex]L = 4.450\times 10^{6}\,m[/tex] and [tex]h = 31\times 10^{3}\,m[/tex], then the mass of the continent is:

[tex]m = \left(2620\,\frac{kg}{m^{3}} \right)\cdot (4.450\times 10^{6}\,m)^{2}\cdot (31\times 10^{3}\,m)[/tex]

[tex]m = 1.608\times 10^{21}\,kg[/tex]

The mass of the continent is approximately [tex]1.608\times 10^{21}[/tex] kilograms.

2) By assuming that continent can be represented as a particle, we define its kinetic energy as:

[tex]K = \frac{1}{2}\cdot m \cdot v^{2}[/tex] (2)

Where:

[tex]K[/tex] - Translational kinetic energy, measured in joules.

[tex]v[/tex] - Motion rate of the continent, measured in meters per second.

If we know that [tex]m = 1.608\times 10^{21}\,kg[/tex] and [tex]v = 1\times 10^{-2}\,\frac{m}{s}[/tex], then the kinetic energy of the continent is:

[tex]K = \frac{1}{2}\cdot (1.608\times 10^{21}\,kg)\cdot \left(1\times 10^{-2}\,\frac{m}{s} \right)^{2}[/tex]

[tex]K = 8.04\times 10^{16}\,J[/tex]

The kinetic energy of the continent is approximately [tex]8.04\times 10^{16}[/tex] joules.

3) The speed of the jogger is derived from the definition of translational kinetic energy:

[tex]v = \sqrt{\frac{2\cdot K}{m} }[/tex]

If we know that [tex]K = 8.04\times 10^{16}\,J[/tex] and [tex]m = 77\,kg[/tex], then the expected speed of the jogger is:

[tex]v = \sqrt{\frac{2\cdot (8.04\times 10^{16}\,J)}{77\,kg} }[/tex]

[tex]v\approx 45.698\times 10^{6}\,\frac{m}{s}[/tex]

The speed of the 77 kg-jogger would be approximately [tex]45.698\times 10^{6}[/tex] meters per second.

Is Natural Gas nonrenewable or renewable? Why? Use in your own words.

Answers

Answer:

Natural gas is non renewable energy.

Explanation:

Because they were formed from the buried reamains of plants and animals that live a million years ago. It is formed from fossil fuels.

Explain what it means when we say a substance is magnetic.


Discuss the relationship between electric and magnetic fields.


Which types of wires (cooper, aluminum, or string) are ferromagnetic metals?​

Answers

Answer: See the explanation.

Explanation:

When we say a substance is magnetic it means the atoms are lined in a way that created a magnetic field that goes from one side to the other

These are essentially two aspects of the same thing, because a changing electric field creates a magnetic field, and a changing magnetic field creates an electric field. This is the relationship.

Answer: Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String does have a ferromagnetic property

10- The coefficient of volumetric expansion for gold is 4.20 x 10°/C°. The density of gold is
19 300 kg/m at 0.0 °C. What is the density of gold at 1050 °C?
(a) 20 200 kg/m
(b) 19 000 kg/m
(c) 18 500 kg/m
(d) 19 300 kg/m
(e) 18 800 kg/m

Answers

Answer:

 ρ = 19215 kg / m³ , the answer the correct  is D

Explanation:

All materials are sold when heated, in first approximation

              ΔV = β V₀ (T -T₀)

for this case

              ΔV = 4.20 10⁻⁶ Vo (1050 - 0)

              ΔV = 4.41 10⁻³ Vo m³

              V-Vo = 4.41 10⁻³ Vo

              V = 1.00441 Vo

density is defined by

           ρ = m / V

a T = 0ºc

            ρ₀ = m / Vo

aT= 1050ºC

             

           ρ = m / V

           ρ = m / (1,00441 Vo)

           ρ = 1 / 1.00441      m/Vo

          ρ = 0.9956 ρ₀

          ρ = 0.9956 19300

          ρ = 19215 kg / m³

when checking the answers the correct one is D

A baseball player exerts a force of 100 N on a ball for a distance of 0.5 mas he throws it. If the ball has a mass of 0.15 kg, what is its velocity as it leaves his hand?

Answers

Answer:

25.82 m/s

Explanation:

We are given;

Force exerted by baseball player; F = 100 N

Distance covered by ball; d = 0.5 m

Mass of ball; m = 0.15 kg

Now, to get the velocity at which the ball leaves his hand, we will equate the work done to the kinetic energy.

We should note that work done is a measure of the energy exerted by the baseball player.

Thus;

F × d = ½mv²

100 × 0.5 = ½ × 0.15 × v²

v² = (2 × 100 × 0.5)/0.15

v² = 666.67

v = √666.67

v = 25.82 m/s

This question involves the concepts of the law of conservation of energy and kinetic energy.

The baseball leaves the hand with a velocity of "25.82 m/s".

From the law of conservation of energy the work done on the ball must be equal to the kinetic energy of the ball:

[tex]W=K.E\\\\Fd=\frac{1}{2}mv^2\\\\v=\sqrt{\frac{2Fd}{m}}\\\\v=\sqrt{\frac{2(100\ N)(0.5\ m)}{0.15\ kg}}[/tex]

where,

F = force applied = 100 N

d = displacement of ball = 0.5 m

m = mass of ball = 0.15 kg

v = 25.82 m/s

Learn more about the law of conservation of energy here:

brainly.com/question/20971995?referrer=searchResults

The attached picture explains the law of conservation of energy.

Why is the metric system used globally, but we use the US customary units?

Answers

Answer:

The biggest reasons the U.S. hasn't adopted the metric system are simply time and money. When the Industrial Revolution began in the country, expensive manufacturing plants became a main source of American jobs and consumer products.

Explanation:

If Earth’s Moon were replaced with a typical neutron star, what would the angular diameter of the neutron star be as seen from Earth?

Answers

Answer:

[tex]0.00005202\ \text{rad}=0.003^{\circ}[/tex]

Explanation:

d = Diameter of typical neutron star = 20 km = 20000 m

D = Distance between Earth and Moon = [tex]384.4\times 10^6\ \text{m}[/tex]

Here, [tex]D>>d[/tex] so we use small angle approximation

[tex]\delta=\dfrac{d}{D}\\\Rightarrow \delta=\dfrac{20000}{384.4\times 10^6}\\\Rightarrow \delta=0.00005202\ \text{rad}=\dfrac{0.00005202\times 180}{\pi}=0.003^{\circ}[/tex]

The angular diameter of the neutron star would be [tex]0.00005202\ \text{rad}=0.003^{\circ}[/tex] from Earth.

A cyclist is riding his bike up a mountain trail. When he starts up the trail, he is going 8 m/s. As the trail gets steeper, he slows to 3 m/s in 1 minute. What is the cyclist’s acceleration?

Answers

Answer:

[tex]\boxed {\boxed {\sf a\approx -0.08 \ m/s^2}}[/tex]

Explanation:

Acceleration can be found by dividing the change in velocity by the time.

[tex]a=\frac{v_f-v_i}{t}[/tex]

The final velocity is 3 meters per second. The initial velocity is 8 meters per second.

We need to convert the time to seconds.

t= 1 minute 60 seconds = 1 minute t=60 seconds

So, we know that:

[tex]v_f=3 \ m/s \\v_i= 8 \ m/s\\t= 60 \ s[/tex]

Substitute the values into the formula.

[tex]a=\frac{3 \ m/s - 8 \ m/s}{60 \ s}[/tex]

Solve the numerator.

3 m/s - 8 m/s = -5 m/s

[tex]a=\frac{-5 \ m/s}{60 \ s}[/tex]

Divide.

[tex]a=-0.0833333333 \ m/s/s[/tex]

Let's round to the nearest hundredth.

The 3 in the thousandth place tells us to leave the 8 in the hundredth place.

[tex]a\approx -0.08 \ m/s^2[/tex]

The cyclist's acceleration is about [tex]\boxed {-0.08 m/s^2}[/tex]

HELP THIS IS DUE IN 5 MINUTES!!!!!!!!!!!! WILL GIVE BRAINLIEST

what is the definition of total velocity?

Answers

Answer:

Image result for total velocity definition

The average speed of an object is defined as the distance traveled divided by the time elapsed.

Explanation:

An object moves in along the x-axis with an acceleration given by: a = 5t (m/s2). The position of the object at t=0.0 is 6 m, and its velocity at t=0.0 s is 4 m/s. Calculate the position at t=5 s.​

Answers

Answer:

The position of the object at [tex]t = 5\,s[/tex] is 130.167 meters.

Explanation:

Let [tex]a(t) = 5\cdot t\,\left[\frac{m}{s^{2}} \right][/tex] the acceleration experimented by the object along the x-axis. We obtain the equation for the position of the object by integrating in acceleration formula twice:

Velocity

[tex]v(t) = \int {a(t)} \, dt[/tex] (1)

[tex]v(t) = 5\int {t} \, dt[/tex]

[tex]v(t) = \frac{5}{2}\cdot t^{2}+v_{o}[/tex] (2)

Where [tex]v_{o}[/tex] is the initial velocity of the object, measured in meters per second.

Position

[tex]s(t) = \int {v(t)} \, dt[/tex] (3)

[tex]s(t) = \frac{5}{2}\int {t^{2}} \, dt+v_{o}\int \, dt[/tex]

[tex]s(t) = \frac{5}{6}\cdot t^{3}+v_{o}\cdot t + s_{o}[/tex] (4)

Where [tex]s_{o}[/tex] is the initial position of the object, measured in meters per second.

If we know that [tex]s_{o} = 6\,m[/tex], [tex]v_{o} = 4\,\frac{m}{s}[/tex] and [tex]t = 5\,s[/tex], then the position of the object is:

[tex]s(5) = \frac{5}{6}\cdot (5)^{3}+\left(4\right)\cdot (5)+6[/tex]

[tex]s(5) = 130.167\,m[/tex]

The position of the object at [tex]t = 5\,s[/tex] is 130.167 meters.

200. Un automóvil se desplaza

hacia la izquierda con

velocidad constante v,

en el momento en que se

deja caer un saco de lastre

desde un globo en reposo.

El vector que representa

la velocidad del saco vista

desde el automóvil en ese

instante en que se suelta es

Answers

Skajwopwpoe eueusjjeww

A ball is launched from a 300m cliff and lands 380m away from the cliff in 9 seconds. Calculate the initual speed and the angle of the ball when it was launched.​

Answers

Answer:

Explanation:

Given

Maximum height H = 300m

Range (horizontal distance) = 380m

Required

Initial speed U and the angle of the ball when it was launched.​

Range = U√2H/g

380 = U√2(300)/9.8

380 = U√600/9.8

380 = 7.8246U

U = 380/7.8246

U = 48.57m/s

The initial speed is 48.57m/s

b) Using the formula for calculating time of flight;

T = 2Usin theta/g

9 = 2(48.57)sin theta/9.8

9*9.8 = 97.14sin theta

88.2 = 97.14sin theta

88.2/97.14 = sin theta

sin theta = 0.9079

theta = sin^-1(0.9079)

theta = 65.23°

hence the angle when the ball was launched is 65.23°

1) 1000 kg car takes travels on a circular track having radius 100 m with speed 10 m/s. What is the magnitude of the centripetal force acting on the car? *

1 point

1 N

100 N

1000 N

10000 N


2) 1000 kg car takes travels on a circular track having radius 100 m with speed 10 m/s. What is the magnitude of the acceleration of the car? *

1 point

0.1 m/s^2

1 m/s^2

10 m/s^2

100 m/s^2

Answers

Answer:

(1) 1000 N (2) 1 m/s²

Explanation:

(1) Given that,

The mass of a car, m = 1000 kg

Radius of a circular track, r = 100 m

Speed of the car, v = 10 m/s

We need to find the magnitude of the centripetal force acting on the car. The magnitude of the centripetal force is given by :

[tex]F=\dfrac{mv^2}{r}\\\\F=\dfrac{1000\times (10)^2}{100}\\\\F=1000\ N[/tex]

So, the correct option is (c) i.e. 1000 N

(2).The mass of a car, m = 1000 kg

Radius of a circular track, r = 100 m

Speed of the car, v = 10 m/s

We need to find the magnitude of the centripetal acceleration of the car. The magnitude of the centripetal acceleration is given by :

[tex]a=\dfrac{v^2}{r}\\\\a=\dfrac{(10)^2}{100}\\\\a=1\ m/s^2[/tex]

So, the correct option is (b) i.e. [tex]1\ m/s^2[/tex]

Please answer my question

Answers

Answer:

Answer is (b) Mercury, venus and Mars.

Explanation:

i think b is correct!!

;-) :-) :-) :-)

Erma built the simple motor shown below with a battery, a permanent magnet, a copper coil of wire, and an iron bar. When the motor is turned on, the iron bar and coil spin in a circle The motor transforms _______ energy into _______ energy. Question 27 options: mechanical; chemical electrical; mechanical mechanical; electrical thermal; electrical

Answers

Answer:

electrical to mechanical

Explanation:

A current-carrying wire passes through a region of space that has a uniform magnetic field of 0.96 T. If the wire has a length of 2.7 m and a mass of 0.79 kg, determine the minimum current needed to levitate the wire.

Answers

Answer:

I = 2.99 A

Explanation:

magnetic field, B = 0.96 T, length of wire, l = 2.7 m, mass of wire, m = 0.79 kg.

Since it is expected that the wire would vibrate or move in the magnetic field, from Newton's second law of motion;

F = mg

where F is the force on the wire, m is the mass of the wire and g is the acceleration due to gravity.

But,

F = BIL

⇒ BIL = mg

0.96 x I x 2.7 = 0.79 x 9.8

2.592I = 7.742

I = [tex]\frac{7.742}{2.592}[/tex]

 = 2.9869

I = 2.99 A

The required minimum current is 2.99 A.

The electron dot diagram shows the arrangement of dots without identifying the element.

? with 2 dots above and 1 dot each right, below, left.

Which element’s symbol could replace the question mark in the diagram?

boron (B)
neon (Ne)
rubidium (Rb)
arsenic (As)

Answers

Answer:

Arsenic (As)

Explanation:

Arsenic is the only answer choice that has five valence electrons like the electron dot structure shows.

Answer:

Arsenic (As)

Explanation:

You are explaining to friends why astronauts feel weightless orbiting in the space shuttle, and they respond that they thought gravity was just a lot weaker up there. Convince them and yourself that it isn't so by calculating how much weaker gravity is 200 above the Earth's surface.
Delta G/G = ? %

Answers

Answer:

The gravity is 87.4% as strong as at the Earth’s surface.

Explanation:

Hope this helped!

An oscilloscope is set on a TIME/DIV setting of 50 ms. There are 10 divisions on the time scale. A sinewave on the oscilloscope display has exactly three full cycles of the sine wave that fit on the 10 divisions. What is the frequency of the wave?

Answers

Answer:

f= 6 Hz

Explanation:

Since the TIME/DIV setting is set to 50 ms, and there 10 divisions on the time scale, that means that full scale display is 500 msec.If a sinewave has exactly three full cycles of the sine wave that fit on the 10 div, this means that one cycle is just one-third of the 10 div value, as follows:

       [tex]T = \frac{500 msec}{3} = 166.7 msec (1)[/tex]

Since the frequency of a wave is just the number of cycles per unit time, can be written as follows:F = 1/T = 1/(166.7 msec) = 6 Hz

A sample of gas, initially with a volume of 1.0 L, undergoes a thermodynamic cycle. Find the work done by the gas on its environment during each stage of the cycle described below. (Enter your answers in J.)

Answers

Answer:

(a) W₁ = 3293.06 J = 3.293 KJ

(b) W₂ = 0 J

(c) W₃ = - 506.625 J = - 0.506 KJ

(d) W₄ = 0 J

(e) W = 2786.435 J = 2.786 KJ

Explanation:

The complete question has following parts:

(a) First gas expands from a volume of 1 L to 6 L at a constant pressure of 6.5 atm

(b) Second, the gas is cooled at constant volume until the pressure falls to 1 atm

(c) Third, the gas is compressed at a constant pressure of 1 atm from a volume of 6 L to 1 L.

(d) Finally the gas is heated until its pressure from 1 atm to 6.5 atm at constant volume

(e) what is the net work?

ANSWERS:

(a)

The work done by a gas at constant pressure is given as follows:

W = PΔV

where,

W = Work done by the gas

P = Constant Pressure of the Gas

ΔV = Change in Volume of The gas

Therefore, for the first step:

P = P₁ = (6.5 atm)(1.01325 x 10⁵ Pa/1 atm) = 6.58613 x 10⁵ Pa

ΔV = ΔV₁ = 6 L - 1 L = (5 L)(0.001 m³/1 L) = 5 x 10⁻³ m³

W = W₁

Therefore,

W₁ = (6.58613 x 10⁵ Pa)(5 x 10⁻³ m³)

W₁ = 3293.06 J = 3.293 KJ

(b)

The work done at a constant volume by a gas is always zero due to no change in volume:

W₂ = P₂ΔV₂

W₂ = P₂(0)

W₂ = 0 J

(c)

For the third step:

P = P₃ = (1 atm) = 1.01325 x 10⁵ Pa

ΔV = ΔV₃ = 1 L - 6 L = (- 5 L)(0.001 m³/1 L) = - 5 x 10⁻³ m³

W = W₃

Therefore,

W₃ = (1.01325 x 10⁵ Pa)(-5 x 10⁻³ m³)

W₃ = - 506.625 J = - 0.506 KJ

(d)

The work done at a constant volume by a gas is always zero due to no change in volume:

W₄ = P₄ΔV₄

W₄ = P₄(0)

W₄ = 0 J

(e)

Hence, the net work is given as follows:

W = W₁ + W₂ + W₃ + W₄

W = 3293.06 J + 0 J + (- 506.625 J) + 0 J

W = 2786.435 J = 2.786 KJ

Sitting in a parked bu s, you suddenly look up at a bus moving alongside and it appears that you are moving. Why is this? How about with both buses moving in opposite directions?

Answers

Answer:

Explained below

Explanation:

When one sits in a parked bus, and another bus is moving alongside, it means the other bus is moving relative to you. However, this makes the brain register in such a way that it's feels the bus you are in is the one moving.

In the second case where both buses are moving in opposite directions, the brain will register it in such a way that it seems the bus in which you are at is moving at a far higher speed than the speed in which it is actually moving.

This is because the relative velocity of the other vehicle is higher and it is therefore what makes your brain think your bus is moving at a faster speed.

You are designing a flywheel. It is to start from rest and then rotate with a constant angular acceleration of 0.200 rev/s^2. The design specifications call for it to have a rotational kinetic energy of 330 J after it has turned through 30.0 revolutions.

What should be the moment of inertia of the flywheel about its rotation axis?
Express your answer with the appropriate units.

Answers

Answer: 1.14 kg*m/s

Explanation:

The first person explained everything right, they just forgot to convert the angular acceleration to rads/sec^2 from revs/sec^2. Once that is converted, your answer should come out right.

Another small thing, the answer there has an extra unnecessary step. It tells you to find the square root of w^2 to find w but that is unnecessary since the final equation asked for w^2. Hope this helps! :)

The moment of inertia I of the flywheel about its rotation axis is

[tex]1.39Kgm^2[/tex]

Given

Angular displacement,

[tex]\theta = 30rev \\\\\theta = (30) * 2\pi rad \\\\\theta = 188.495rad[/tex]

Therefore, Final angular velocity (w) will be:

[tex]w^2 = 2\alpha\theta\\\\w^2 = 2 * (0.200 * 2\pi) * (188.49)\\\\w^2 = 473.73\\\\w = 21.76 rad/s[/tex]

Therefore,

moment of inertia

[tex]I = 2 * K / w^2[/tex]

[tex]I = 2 * 330 / 473.73[/tex]

[tex]I = 1.39kgm^2[/tex]

For more information on moment of inertia

https://brainly.com/question/19557854?referrer=searchResults

A rollercoaster moves from the bottom of a hill and approaches the top of the hill. If friction between the wheels and the track is ignored, which statement describes the components of the total energy?

*answer choices pic attached*

{If anyone has the answers to the Energy Flows Quick Check or others please let me know}.

Answers

Answer:

The kinetic energy remains same and gravitational potential energy increases.

Explanation:

KINETIC ENERGY:

As, we know that the kinetic energy depends upon the speed of the object. Hence, the kinetic energy is given as:

K.E = (1/2)mv²

where,

m = mass

v = speed

K.E = Kinetic Energy

Since, the friction is ignored, therefore the speed of roller coaster will remain same.

Therefore, its Kinetic Energy will also remain same.

POTENTIAL ENERGY:

The potetial energy od a body depends upon its height, as follows:

P.E = mgh

where,

P.E = potential Energy

m = mass

g = acceleration due to gravity

h = height

As, the roller coaster moves up hill its height increases.

Therefore, its potential energy will also increase.

hence, the correct option is:

The kinetic energy remains same and gravitational potential energy increases.

Which temperature is warmer than the freezing point of water?
O A. OK
O B. 33K
O C. 1°C
O D.O°F

Answers

C. 1 Degree
The freezing point and melting point is 0 Degrees or 32 Degrees Fahrenheit

Answer:

C 1 degree

Explanation:

someone help please


waves disturb ____, but do not transmit it.

a. energy
b. matter
c. sound
d. none of the above

Answers

Answer:

b. matter

Explanation:

Waves disturb matter but do not transmit it.

Waves are disturbances that transmit energy from one point to another. Although they cause disturbances, they do not transfer the matters in the medium.

Energy is propagated by a wave. When for example, sound waves are produced, the disturbance is propagated via particle - particle interaction But after the wave train moves, the particles remain.
Other Questions
PLEASEHELP!!!Jacob and Matthew are pulling a 20 kg box filled with chocolate along the ground, while Savannah is trying to pull it back in the other direction. Jacob is pulling with 50 N, Matthew with 40 N, and Savannah is pulling with 60 N in a negative direction. Draw an FBD; it should have 5 forces on it. Find the net Force. Then calculate the acceleration of the box. Lastly, calculate the acceleration if Mathew decides to run for his life and stop pulling. how many moles of ethanol C2H6O, are in a 10.0g sample From Mickey Grace to Everyone:Grace is 4 years older than Elena. If Grace is 9years old, how old is Elena? Grace is The type of wireless access that uses a modem to connect to cell towers is called ___ broadband. The occasional moments of light or hope in the book serve what purpose?They give the reader hope.They heighten the symbol of darkness.They highlight different characters.They move the plot along. how is atmospheric carbon in the form of CO2 converted into a molecule that is usable to all organisms? Quiz 2: percent and percentagesolve: 24% of 80= A. 19.2B. 38.4C. 192D. 384 "Do you think Tecumseh's confederacy helped or hurt the cause of the Native Americans?" Find the value of P for which the inflows will equal the outflows. Find the effective rate first. Rate 8% p y c dYear Outflows Inflows 0 -P 1 -2P 2 -4P 3 -8P 4 -16P 5 $24,000 6 $30,000 7 $36,000 8 $42,000 9 $48,000 10 $54,000 I announced to the entire playground that "there's nobetter four-square player than Mitchell Pritchett."Submit answerReport a problem Pure copper was mixed with a 10% copper alloy to produce an alloy tht was 25% copper. How much of the pure copper and how much 10% alloy were used to produce 36 kg of 25% alloy? 1. What did you learn today about the impact the slave trade had on Africa?2. What was something you didn't know before this week about the Atlantic Slave Trade?3. Why do you think it is important to learn about this part of our World History? Can someone help me with this? Help Me on this palzz how many students in your class have set off firecrackers by imitating others or at the behest of someone. (what mean by this question and give a answer) A financial institution that makes loans using a borrower's car as collateral is called a:A. payday lenderB. retail bank.C. title pawn lender.D. credit union. What was the result of the Assyrian invasion of the Kingdom of Israel? The Assyrians conquered the Kingdom of Israel and outlawed Judaism. The Israelites rebelled against the Assyrian Empire and reunited with Judah. The Assyrians fought the Babylonians to gain control over the Kingdom of Israel. The Israelites held off the Assyrians and protected the Temple of Solomon. SOMEONE PLEASE HELP ME A rectangular poster is 50 cm long and 25 cm wide. If 1 cm is approximately .4 inches What is the perimeter of the poster john rides his bike with a constant speed of 20 km/h . how far can he travel in 2 hours?