Answer:
m(Ag) = 227.5g
Explanation:
...what is the mass of the piece of silver?
The heat given for the piece of silver is the same heat that is absorbed for the water, that is:
m(Ag)×C(Ag)×ΔT(Ag) = m(Water)×C(Water)×ΔT(Water)
m is mass of water in solution: 26.0mL = 26g of water
And m(Ag) is the mass of Ag, our incognite.
C is specific heat (0.240J/g°C for Ag), and 4.184J/g°C for water
ΔT is change in temperature (93.8°C - 44°C = 49.8°C) for Ag ad (44°C - 19°C = 25°C)
Replacing:
m(Ag)×C(Ag)×ΔT(Ag) = m(Water)×C(Water)×ΔT(Water)
m(Ag)×0.240J/g°C×49.8°C = 26g×4.184J/g°C×25°C
m(Ag)* 11.952J/g = 2719.6J
m(Ag) = 227.5g
observe the long-term effects OT erosion on
1.
Click Play ( )). Wait for about 20,000 simulated years, then click Pause ( 1 ). If you want,
you can drag the landscape to rotate the view. How much does the landscape change?
Several erosive agents affect the soil structure and composition. Selecting sandstone, 100cm/yr precipitation, 20ºC, and 50% vegetation cover, there is 45% of eroded rock. The general landscape appearance changes little.
ErosionErosion is the process of fertile soil loss.
It is due to several external agents that damage the ground and drag the exposed material from the superficial layer of the earth.
Erosive agents
Some of the erosive agents are water, wind, ice, gravity, or animal trampling.
Phases
Three main phases compose the erosion process
a) particles landslide
b) transport of superficial free particles
c) deposit/sedimentation.
Soil erosion leads to its degradation.
Since its regeneration is extremely slow, erosion produces several negative events that lead to soil loss as a non-renewable natural resource.
Vegetation cover
All the erosive agents act together modifying the soil composition, shape, and structure. The loss of plant cover increases, even more, the erosive effects.
Soil vegetation cover reduces erosion because the aerial part of the plant protects the surface, while roots protect the ground structure and retain water.
The less vegetation cover there is, the more exposed the soil is, and the more severe effects the erosive agents cause.
In the exposed example, we have many variables to control and analyze their effect on soil erosion. Before playing the simulation, I chose the followings
Stones ⇒ sandstone Precipitation ⇒ 100 cm/yrTemperature ⇒20 ºCVegetation cover ⇒ 50%Under these conditions, after 20,000 years there was 0.42 km³ of eroded rock.
The general aspect of the landscape changed very little, suggesting that erosion occurs slowly.
Probably, if we change the values of the variables, we will observe a sharper change. For instance, if we take the vegetable cover to less than 20% and increase the levels of precipitation and temperature, we will observe a faster erosion process and a wider affected area.
You can learn more about erosion at
https://brainly.com/question/2635044
https://brainly.com/question/159207
Potassium cyanide is a toxic substance, and the median lethal dose depends on the mass of the person or animal that ingests it. The median lethal dose of KCN for a person weighing 215 lb (97.5 kg ) is 8.84×10−3 mol .
What volume of a 0.0250 M KCN solution contains 8.84×10−3 mol of KCN?
Express the volume to three significant figures and include the appropriate units.
Answer:
0.354L
Explanation:
Given parameters:
Molarity of KCN = 0.025M
Number of moles = 8.84 x 10⁻³mol
Unknown:
Volume of KCN = ?
Solution:
The molarity of a substance is expressed as;
Molarity = [tex]\frac{number of moles }{volume }[/tex]
Volume of KCN = [tex]\frac{number of moles }{molarity}[/tex]
Now insert the parameters and solve;
Volume of KCN = [tex]\frac{0.00884}{0.025}[/tex] = 0.354L
How to do this question plz answer me
Answer: Ionic
Explanation: It is a type of chemical bond that generates two oppositely charged ions.
Which type of bond involves valence electrons constantly moving between atoms, like a sea of electrons?
a. Ionic
b. Covalent
c. Molecular
d. Metallic
Can be a solid,liquid,or gas A)Metal B)Nonmetal C)Both
Answer:
I think it's B. Nonmetal
(I'm so sorry if it's wrong)
Hope this Helps!
Answer:
I personally think it's both I'm sorry if this is wrong
what type of a solid contains particles that are jumbled and form no particular pattern?
a. high-pressure
b. high-viscosity
c. crystaline
d, amorphous
Amorphous solids have two characteristic properties. When cleaved or broken, they produce fragments with irregular, often curved surfaces; and they have poorly defined patterns when exposed to x-rays because their components are not arranged in a regular array. An amorphous, translucent solid is called a glass
How many electrons are transferred in total in this
reaction?
2 NH3 + 2 O2 – N2O + 3 H2O
4 electrons
10 electrons
8 electrons
6 electrons
Answer:
10.
....................
.......
What is the Molecular mass of sodiumcholoride ?
Answer:
58.5g/mol
Explanation:
Given substance:
Sodium chloride = NaCl
Unknown:
Molecular mass = ?
Solution:
The molecular mass of a compound is the gram-formula mass or gram-molecular weight of the compound.
It is determined by adding its component atomic masses and then express in grams per mole;
Atomic mass of Na = 23g
Atomic mass of Cl = 35.5g
NaCl = 23 + 35.5 = 58.5g/mol
Can sedimentation and decantation be used for all types of mixtures? Explain
Is there a relationship between the mass of an object and the rate of settling? Explain.
Explanation:
1. Sedimentation and decantation cannot be used for all types of mixtures.
Decantation is a separation technique in which is used to separate immiscible liquids or mixtures containing liquid and solids within them.
In decantation, gravity is used to bring the denser materials to settle at the bottom.
For homogenous mixtures, it is not possible to use decantation. A solution of sugar and water will not decant.
2. Yes, mass of an object reduces the settling time of such object in a mixture.
The higher the mass, the faster the rate of settling. Also, as we know, mass is directly proportional to density. A body with a high density will settle faster in solution.
What do acids react with in limestone to form giant cave systems?
Answer:
Giant cave systems have formed through the reaction of acids with carbonates the that make up limestone. Caves are formed as a result of dissolution of limestone, through a type of chemical weathering known as carbonation.
Explanation:
.
Answer:
It's C: Carbonates
Explanation:
Its on ed
The formula for calculating density, D, is D=MV, where M represents mass and V represents volume. For liquids, volume is often given in cubic centimeters (cc), which is the same as cm 3. If the density of an unknown liquid is 1.6 g/cc, what is the mass of 800 cc of the unknown liquid in grams (g)? 0.002 g 1.6 g 500 g 1280 g
please anwser asap!!!!!!!
Answer:
500g
Explanation:
Just divide by all the numbers and the one that equals 1.6 is the answer
what is the number of moles in 2.43 g Mg
I need help! Thanks!
Answer:
C. As speed increases, kinetic energy increase exponentially
Explanation:
As you can see on the graph, the further right we move on the x-axis, the higher the values on the y-axis. This means that as one value increases, the other value also increases. The only answer choice that says this is C.
Hope this helps :)
is C because i did it on the quiz
What determines the appearance of the moon from earth?
To solve this we must be knowing each and every concept related to satellite. Therefore, moon phases and moon placements have a role the appearance of the moon from earth.
What is satellite?Any object that circles a planet in a curved route is considered a satellite. There are several man-made (manufactured) satellites, most of which are closer to Earth than the moon, which is Earth's original natural satellite.
We must revisit our buddy Newton in order to comprehend why satellites move in this manner. Gravity, according to Newton, is a force that unites all of the universe's objects. Moon phases and moon placements have a role in determining this. The only major factor affecting the Moon's phase is where it is in relation to Earth and the Sun.
Therefore, moon phases and moon placements have a role the appearance of the moon from earth.
To learn more about satellite, here:
https://brainly.com/question/21034894
#SPJ2
3.04 Quiz: Chemical Reactions
Word bank please help fill.
Answer:
1. Chemical reactions
2.Substances
3. Properties
4. Precipitate
5. Light
6. Temperature
7. Color
8. Gas
Explanation:
During chemical reactions, new substances that possess new properties are formed. During the process of chemical reactions, evidences are found. Some of the evidences are formation of precipitate or light gel, production of gases and changes in colour and temperature.
Chemical reactions start with the substances or compounds which are known as reactants. The reactants react to form new substances known as the products which possess new properties.
Mitochondria are found within: A) All prokaryotic cells B) A cell's plasma membrane C) A cell's nucleus D) Eukaryotic cells E) None of these answers are correct
Answer:
The correct answer is - D) Eukaryotic cells.
Explanation:
The mitochondrion is found in all eukaryotic organisms with the exception of a few. It is a double-membrane-bound organelle within the cytoplasm of the cell that takes in nutrients, breaks them down, and creates energy that makes it the powerhouse of the cell.
It turns the chemical energy from nutrients in the cell to generate energy in a form usable to the host cell which is ATP. Prokaryotic cells lack mitochondria and other double membrane-bound organelles and it s found outside of the nucleus in the eukaryotic cells.
What is the concept of Dimensional Analysis?
Answer:
In engineering and science, dimensional analysis is the analysis of the relationships between different physical quantities by identifying their base quantities (such as length, mass, time, and electric charge) and units of measure (such as miles vs. kilometers, or pounds vs. kilograms) and tracking these dimensions as
Explanation:
27. The fundamental SI unit of length is the meter. How-
ever, we often deal with larger or smaller lengths or
distances for which multiples or fractions of the fun-
damental unit are more useful. For each of the fol-
lowing situations, suggest what fraction or multiple
of the meter might be the most appropriate mea-
surement.
a. the distance between Chicago and Saint Louis
b. the size of your bedroom
c. the dimensions of this textbook
d. the thickness of a hair
Answer:
A) Km
B) m
C) cm
D) mm
Explanation:
A) The distance between Chicago and Saint Louis is quite a distance and would be best presented in the largest multiple of the SI unit of length.
For example if the distance is 500000 m, it's a bit bogus to write, so we can simplify by writing in terms of 10^(-3) m which is in km.
Thus, we can write as 500000 × 10^(-3) km = 500 km
B) By standard measurement, the size of a bedroom is usually: 3.6 m × 3.6 m.
This not complex to write and can be kept as it is in metres.
C) The average dimension of a textbook is around 0.25 m by 0.2 m.
Let's get rid of the decimal by converting to terms of 10² m which is expressed as cm.
Thus, dimension is now: (0.25 × 10²) by (0.2 × 10²) = 25 cm by 20 cm
D) Average thickness of a hair in metres is 8 × 10^(-5) m.
Now this is a bit long. So we can express is in terms of 10^(3) m which is an expression denoted by millimeter (mm).
Thus, thickness is 8 × 10^(-5) × 10³ = 0.08 mm
Is Steel a compound?
Steel is a mixture of iron and carbon fused together with one or more other metals or nonmetals. Because steel is a mixture rather than a chemical compound, steel does not have a set chemical compound formula.
Answer:
No
Explanation:
Steel is a mixture of iron and carbon fused together with one or more other metals or nonmetals. Because steel is a mixture rather than a chemical compound, steel does not have a set chemical compound formula.
HELP PLEASE ANSWER ASAP!!!!!
When atoms react, they often lose, gain, or share electrons to form a more stable version of themselves. For example, alkali metals such as sodium (Na) lose their outer shell electron in their reactions to form compounds. The electron configuration of alkali metals would then resemble those of which group of the periodic table in the compounds they form?
a. 7A or group 17
b. 8A or group 18
c. 2A or group 2
d. 1A or group 1
Answer:
D
Explanation:
An astronaut is working outside a spaceship and realizes that the cord attaching him to the
spaceship has been broken. To move back to the spaceship in the vacuum condition, he
throws a heavy tool to the opposite direction from the spaceship. Which law of motion does
he apply?
Does he apply:
A. Newton’s Second Law of Motion
B. Law of Conservation of Energy
C. Newton’s Third Law of Motion
D. Newton’s First Law of Motion
Need helpASAP
A 1.5 m block of tungsten has a mass of 28 875 kg.
Write down the equation that links density, mass and volume.
Explanation:
Density is an intensive property of any matter. Any given pure sample of a substance will have the same density value.
Density is the mass per unit volume of a compound;
Mathematically;
D = [tex]\frac{M}{V}[/tex]
where M is the mass
V is the volume
D is the density
which of the following is an oxyanion?
Answer:
please give the answer choice.
True or False;
aa is faster moving lava than pahoehoe?
Answer:
It is false :l
Explanation:
Pahoehoe is a smooth and continuous lava crust. Pahoehoe forms when the effusion rate is low and consequently the velocity of lava flow is slow. Pahoehoe lava flow is usually at least 10 times slower than typical aa lava flow.
:/
1. How many valence electrons does lodine
have?
Why is it that no two elements have the exact same emission spectrum?
Answer:
When atoms are excited they emit light of certain wavelengths which correspond to different colors. Each element produces a unique set of spectral lines. Since no two elements emit the same spectral lines, elements can be identified by their line spectrum.
Explanation:
Calculate the number of moles in 7g of nitrogen gas
Answer:
0.2498mol[tex]N_{2}[/tex]Explanation:
7gN2 x [tex]\frac{1 mol}{2(14.01) g}[/tex]
=0.2498mol N2
Nitrogen gas has the formula [tex]N_{2}[/tex] so therefore that means you would have to multiply the mass in the molar by 2. To solve for the number of moles you need to cancel out the grams, you do this by using the molar mass of nitrgoen gas. You get the value on in the denominator from the periodic table (atomic mass of element). The grams will cancel out, leaving you with the number of moles when you divide 7/2(14.01).
HELP ME PLEASEEEEEEEEEEEEEEE
(I really dont know the subject i just know science)
Answer:
B
Explanation:
weight , w= mg where m is the mass of the object (unit is kg ) and g is the gravitational force acting on the object ( unit is m/s^2 )
hope it helps
Which is the best example and explanation that a physical change has occurred?
The diagram below shows an oxygen molecule formed when two oxygen atoms bond. Which is likely to be the nature of bonding formed?
Answer:
Covalent bonding
Explanation:
covalent bonding