A piece of metal that has a density of 5.2 g/cm3 and a mass of 100 g was placed in a full jar of water. How many mL of water was spilled out of the jar? Note: one cm^3 = one mL​

Answers

Answer 1

Answer:

100g / (5.2g/cm3)

= 100g / (5.2g / 1cm3)

= 100g x 1cm3 / 5.2 g

= 19.2 cm3

Since 1 cm3 = 1 ml, your answer is 19.2 ml.

Answer 2

The given density and mass of the metallic piece can be used to estimate the volume of the substance. The metal with a mass of 100 gm and a density of 5.2 g/cm³ has a volume of 19.23 ml.

What is the relation between density and volume?

The density of the substance has been given by the ratio of mass to the volume of the substance in g/cm³ or g/mL. It shows the packaging of the molecules in the substances and has been in inverse relation to the volume.

The mass being constant and an increase in volume decreases the density of the substance and vice versa. The volume can be calculated as:

Volume = mass ÷ density

Given,

Density of the metal (ρ) = 5.2g/cm³

Mass of the metal piece (m) = 100g

Volume = V

Substituting the values above as:

ρ = m ÷ V

V = m ÷ ρ

V = 100 ÷ 5.2

= 19.23 mL

Therefore, 19.23 mL is the volume of water that spilled out of the jar.

Learn more about volume and density, here:

https://brainly.com/question/13799762

#SPJ2


Related Questions


Scott and James work at a grocery store. After the grocery
store closed, they were playing a game with a shopping cart
and Scott's skateboard. They crashed the skateboard and
the shopping cart two times. The shopping cart had more non

Answers

Answer: b) Crash 2; the force on the cart was stronger in this crash, so the force on the skateboard was also stronger.

Explanation:

The speed of light in plastic is 2.0 x 108 m/s. Calculate the index of refraction for
plastic.

Answers

Answer:

n=c/v.

1.5=3×10^8/v

v=3×10^8/1.5

v=2×10^8 m/s

Hope this helps :)

The index of refraction for plastic, when speed of light in plastic is 1.5.

How do we calculate refraction index?

Refraction index of any substance will be calculated by using the below equation:

n = c/v, where

c = speed of light in vaccum = 3×10⁸ m/s

v = speed of light in plastic = 2×10⁸ m/sec

On putting values in the above equation, we get

n = 3×10⁸ / 2×10⁸ = 1.5

Hence the refractive index of plastic is 1.5.

To know more about refractive index, visit the below link:
https://brainly.com/question/83184

#SPJ2

How many hydrogen atoms are in 2h2+02—2h20?

Answers

Answer: Two hydrogen atoms

Explanation:

A water molecule (formally known as dihydrogen monoxide) is composed of two hydrogen atoms and one oxygen atom. But you can't simply take two hydrogen atoms and stick them onto an oxygen atom. The actual reaction to make water is a bit more complicated: 2H2 + O2 = 2H2O + Energy.

Which of the following elements would be brittle?
Sulfur
Magnesium
Rubidium
Lithium

Answers

Answer:

Sulfur

Explanation:

Sulfur because it is a dull and brittle

Write the chemical symbols for three different atoms or atomic cations with 26 electrons.

Answers

A neutral iron atom (Fe)

Mn-1 (a manganese that has gained one electron)

Co+1 (a cobalt that has lost on electrons)

All three of these atoms/ions are isoelectronic, meaning that they all have the same number of electrons!

The chemical symbols for three different atoms or atomic cations with 26 electrons are Fe, [tex]Co^+[/tex], [tex]Ni^{2+}[/tex]

Explanation:

The atomic number of an atom is equal to the number of protonsAn atom is neutral, it has an equal number of electrons and protons.Element with atomic number 26 is Iron, Fe.A neutral atom of iron has an equal number of protons and electrons.Cobalt has an atomic number of 27.A neutral atom of cobalt has an equal number of protons and electrons.Cobalt has 27 electrons and by losing one electron it will form a cobalt (I) ion with 26 electrons.The cobalt (I) ion has 26 electrons, [tex]Co^+[/tex].Nickel has an atomic number of 28.A neutral atom of nickel has an equal number of protons and electrons.Nickel has 28 electrons and by losing two electrons it will form a nickel(II) ion with 26 electrons.The nickel (II) ion has 26 electrons,[tex]Ni^{2+}[/tex].

So, from this, we can write chemical symbols for three different atoms or atomic cations with 26 electrons are Fe, [tex]Co^+[/tex], [tex]Ni^{2+}[/tex].

Learn more about ions here:

brainly.com/question/238050?referrer=searchResults

brainly.com/question/491497?referrer=searchResults

A
Carpet is beaten to
beaten to remove dust​

Answers

Answer:

It's Clean?

Explanation:

Please help brainiest is award!

Answers

Answer: A.

Explanation:

The molecular formula for glucose is C6H12O6. This means that there are 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms bonded together to make one molecule of glucose.

Hopes this helps!

Which materials sink in water? Hint: There is more than one nightanswer. Rubber Wooden Ball Ice Granite Titanium​

Answers

Answer:

Granite and Titanium​ will sink

Explanation:

Granite and Titanium will sink in water.Granite and Titanium will sink in water because density of Granite and Titanium is higher then water. Also there raw shape does not help them to float on water.

Which of the following is true about pure substances? A. A pure substance has the same chemical properties throughout. All pure substances are unable to be separated by any means. c. A pure substance can only be made up of one kind of atom. D. A pure substance can always be separated by physical means.​

Answers

Answer:first one

Explanation:

A pure substance has same chemical properties throughout , it cannot be  separated by any means and it is made up of one kind of atom.

What are chemical properties?

These properties are defined as those properties which become evident during or after a chemical reaction after the identity of the substance is changed during chemical reaction.

These properties cannot be determined externally just by viewing the substance ,these change immensely after a substance undergoes a chemical change.These are used for identification of unknown substances and for building up chemical classifications.

The major chemical properties are flammability,toxicity,reactivity,acidity and heat of combustion.For a chemical property to be apparent , it is necessary that the structure of the substance is altered.

Learn more about chemical properties,here:

https://brainly.com/question/1935242

#SPJ2

Elements in group to are cold alkaline earth metals what is most similar about alkaline earth metals how many protons and neutrons they have which Chemical properties he have how many total electrons they have which period They have most often found in

Answers

Answer:

explanations below

Explanation:

The alkaline earth metals are the 6 chemical elements that can be found in group two of the periodic table. These elements have a lot of properties in common, in the sense that they are generally shiny, reactive at standard temperature and pressure and they are also silvery-white. The elements are beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra)

These metals have two electrons at their orbits, which can be easily lost to form cations (with charge +2, and an oxidation state of +2)  

Below are some of their details

Name: Beryllium  

Number of Protons/Electrons: 4  

Number of Neutrons: 5  

Name: Magnesium  

Number of Protons/Electrons: 12  

Number of Neutrons: 12  

Name: Calcium  

Number of Protons/Electrons: 20  

Number of Neutrons: 20  

Name: Strontium  

Number of Protons/Electrons: 38  

Number of Neutrons: 50  

Name: Barium  

Number of Protons/Electrons: 56  

Number of Neutrons: 81  

Name: Radium  

Number of Protons/Electrons: 88  

Number of Neutrons: 138  

Describe how calcium and fluorine bond together to form calcium fluoride. The electron arrangement of each atom is shown.

Answers

Answer:

Detail is given below.

Explanation:

Calcium is alkaline earth metal. It has two valance electron. Thus calcium needs six more electron to complete the octet. Thus, its very easy for calcium to remove its two electron and get complete octet.

Electronic configuration of Ca:

Ca₂₀ = [Ar] 4s²

While,

Fluorine is halogen. It has seven valance electrons. It needed only one electron to complete the octet. When it combine with calcium , calcium loses two electrons thus two atom of fluorine combine with one atom of fluorine and stable compound calcium fluoride is formed.

Electronic configuration of F:

F₉  = [He] 2s² 2p⁵

Chemical equation:

Ca  + F₂     →     CaF₂

Count the total number of atoms in CH4:

Answers

Answer:

5 atoms

Explanation:

there is 1 carbon atom and 4 hydrogen atoms

will give brainlliest

Which noble gas is closest to sulfur, S, on the periodic table? What has to happen for a sulfur atom in order to have an electron arrangement similar to the nearest noble gas?

Answers

Answer: argon

What must happen to a sulfur atom in order for it to have an electron arrangement similar to that of a noble gas? Answer: The noble gas closest to sulfur is argon. A sulfur atom gains two electrons to have an electron arrangement similar to that of argon.

Explanation:

Un estudiante preparo 200 ml de solución de acetato de potasio (CH3COOH ; Masa molar = 98 g/mol ; Ka CH3COOH = 1,8 x 10-5), disolviendo 3,5 g de ácido, la que denomino "Solución A". Posteriormente preparo otra solución de menor concentración del mismo soluto que denomino "solución B" y para ello tomo un volumen de 5,5 ml de la solución A y agrego agua hasta 70 ml de solución. Señale el pH de solución A y B y, la concentración molar de CH3COO- en la solución b.

Answers

Answer:

mirar respuesta abajo

Explanation:

Muy bien. Antes de responder lo que piden en el problema, vamos a calcular la concentración inicial de la solución A:

1) Concentración de la solución A:

En este caso, se sabe que se usaron 3,5 g de la sal, se puede calcular los moles usando el peso molecular y la masa:

n = m/PM  (1)

Aplicando tenemos:

n = 3,5 / 98 = 0,0357 moles

Conociendo los moles, podemos calcular la concentración:

M = n/V (2)

Aplicando la formula tenemos:

M = 0.0357 / 0.200 = 0.1785 M

Esta es la concentración del ácido etiquetado como "Solución A".

Ahora podemos ver la concentración de la solución B, para luego calcular las concentraciones molares de los iones en solución y sus respectivos pH.

2) Concentración del ácido en la solución B:

Con la concentración de "A", se puede determinar la concentración de la solución B. Aqui podemos esperar que sea un valor mas bajo, puesto que es una dilución la que estamos haciendo. Por lo tanto.

Si se toma 5.5 mL de la solución A, entonces:

n = 0.1785 * 0.0055 = 0.00098 moles

Con esto, se calcula la nueva concentración:

M = 0.00098 / 0.070 = 0.014 M

Esta es la concentración de la solución B. Ahora para calcular pH y concentraciones de los iones en equilibrio, hay que plantear la reacción acido base en equilibrio. Como es el mismo compuesto, usaremos la misma ecuación.

3) pH de las soluciones A y B:

Planteamos la reacción de equilibrio:

CH₃COO⁻ + H₂O <------> CH₃COOH + OH⁻     Kb

Calculando el Kb, sería asi:

Kb = Kw/Ka

Kb = 1x10⁻¹⁴ / 1.8x10⁻⁵ = 5.56x10⁻¹⁰

Ahora reescribimos la ecuación y hacemos una tabla de equilibrio:

       CH₃COO⁻ + H₂O <------> CH₃COOH + OH⁻     Kb = 5.56x10⁻¹⁰

i)        0.1785                                    x              x

eq)    0.1785-x                                  x              x

Kb = [OH⁻] [CH₃COOH] / [CH₃COO⁻]

Reemplazando nos queda:

5.56 * 10⁻¹⁰ = x² / (0.1785-x)      

Y como Kb es muy pequeño, se asume que el valor de x será también pequeño, asi que podemos redondear la resta a simplemente 0.1785, quedando tan solo:

5.56 * 10⁻¹⁰ = x² / (0.1785)

x² = 5.56*10⁻¹⁰ * 0.1785

x = √9.9246*10⁻¹¹

x = 9.96*10⁻⁶ M

Esta es la concentración de [OH⁻] y [CH₃COO⁻] en la solución A.

Aplicando lo mismo para la solución B (Cambiando solo el dato de concentración) nos queda:

x = √5.56*10⁻¹⁰ * 0.014

x = 2.79x10⁻⁶ M = [OH⁻] = [CH₃COO⁻]

Finalmente, para calcular pH, se calcula primero el pOH y luego el pH:

pH = 14 - pOH

pOH = -log[OH⁻]

Para la solución A:

pOH = -log(9.96*10⁻⁶) = 5

pH = 14 - 5

pH = 9

En el caso de la solución B:

pOH = -log(2.79*10⁻⁶) = 5.55

pH = 14 - 5.55

pH = 8.45

Espero te ayude

A student lives in an apartment complex next to a park and train tracks. The student observes that they can hear the train coming sooner and from farther away when they are in front of their apartment and can only barely hear the train when they are in the park despite both being the same distance from the railroad tracks.





The student developed the model above. Using the model, identify two potential wave phenomena that occur and are the reason behind why the student can only hear the train in front of the apartment complex.



A.
The train can be heard more easily in front of the apartment complex because of reflection and interference. As the sound comes from the train, the sound waves reflect off of the complex and interfere with each other increasing the amplitude of the wave to make it easier to hear.

B.
The train can not be heard as easily in the park because of reflection and diffraction. The sound reflects off of the trees in the park and diffract between the trees, this causes the waves to bend too much to be heard.

C.
The train can be heard more easily in front of the apartment complex because of diffraction and refraction. The sound waves diffract between the other buildings aiming them towards the apartment complex and then the sound refracts through the apartment complex which makes it more difficult to hear in the park.

D.
The train can not be heard as easily in the park because of interference and reflection. The other buildings in front of the park cause interference of the sound waves from the train and the trees in the park cause reflection making it too hard to hear the train.

Answers

Answer:

The answer is A

Explanation:

A piece of metal with a volume of 2.45 mL has a density of 4.255g/mL. What is the mass of the metal?

Answers

Answer:

The answer is 10.42 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question

volume = 2.45 mL

density = 4.255g/mL

We have

mass = 2.45 × 4.255 = 10.42475

We have the final answer as

10.42 g

Hope this helps you

On the periodic table, the period number can identify the number of energy levels an element will contain.


False

True


i need help

Answers

Answer: True.
Hope this helps!!

Does the use of lithium cause human health problems?

Answers

Answer:

Yes

Explanation:

Lithium can cause nausea, diarrhea, dizziness, change in heart rhythm, muscle weakness, fatigue, and a dazed feeling

Continued use of Lithium could mean fine tremor, frequent urination, and thirst

Source: Webmd.com

How does a heat affect the chemical reaction? ​

Answers

Answer:

Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions. It is only these collisions (possessing at least the activation energy for the reaction) which result in a reaction.

Explanation:

What the first one said

How many atoms are in this formula? 2Fe

Answers

Answer:

two

Explanation:

There are two atoms in 2 Fe, more correctly written as 2Fe or Fe2. Both atoms are from the same element, iron.

Answer:

2

Explanation:

There are two atoms of the same element in 2Fe.

Hope this helps! :)

Where do rivers usually begin?

at the ocean
at groundwater outlets
in mountainous regions
in lakes and larger rivers

Answers

Answer:

in mountainous regions

Explanation:

The rivers usually begins in mountainous regions. A river's source is typically located in a high area, such a mountain or a hill. A river may have several sources. Some rivers start where an underground natural spring discharges water.

What is a mountain ?

A mountain is an elevated area of the crust of the Earth, typically with steep sides that reveal a substantial amount of bedrock that has been exposed.

Although definitions vary, a mountain is often taller than a hill, rising normally at least 300 meters above the surrounding terrain, and differs from a plateau in having a constrained peak region.

Every river has a beginning place where the water flow starts. We refer to this source as a headwater. Some rivers have their beginnings in hills or mountains, where rainwater or snowmelt gathers and creates little channels.

It is possible for the headwater to originate from mountain snowmelt or rainfall, but it is also possible for it to bubble up from the ground or develop at the edge of a lake or big pond.

Thus, option C is correct.

To learn more about mountain, follow the link;

https://brainly.com/question/10690247

#SPJ6

helppppppppppppp plzzzzzzzz Identify each structure based on its label.

Compound A is a
amine.
Compound B is a
amine.
Compound C is a
amine.
Compound D is
.

Answers

A I hope it helps :)

Answer:

kldja

Explanation:

A.) primary

B.) tertiary

C.) secondary

D.) ammonia

edge2020

Help ASAP plzzzz!!!!!!!!

Answers

Answer:

Granite Solid

Milk Liquid

Neon is gas

Wood Is solid

Paper is solid

Helium is Gas

Water is liquid

Air is Gas

Alcohol is liquid

Metal is solid

Nitrogen is gas

Juice is liquid

Oil is liquid

Water Vapor is Gas

Brick is Solid

Propane is Gas

Fabric is solid

Gasoline is Liquid

Explanation:

Hope Dis helped :D :3

I agree with the person above, me you can search those up or look on the periodic table for some of them because metals are to the left and non-metals are to the right.

If a p-wave arrives at 2:10:00 and the s-wave arrives at 2:15:20, how many kilometers from the epicenter is a location?

Answers

Answer:

2.67 x 10⁷km

Explanation:

Given parameters:

    Time of arrival of p-waves  = 2: 10: 00

    Time of arrival of s-waves = 2: 15: 20

Unknown:

Distance of wave from epicenter  = ?

Solution:

 To find the distance of the wave from the epicenter;

     Distance = 3 x 10⁸ x time interval

Time interval = Time of arrival of p-waves  - Time of arrival of s-waves

                       =  2: 10: 00 - 2: 15: 20

                       = 5min 20s

                       = 320s

Now, we need to convert the time to hrs;

        3600s  = 1hr

         320s  = [tex]\frac{320}{3600}[/tex]  = [tex]\frac{4}{45}[/tex]hr

So,

   Distance =  3 x 10⁸  x [tex]\frac{4}{45}[/tex]   = 2.67 x 10⁷km

What is ionization energy?

Answers

The minimum amount of energy required to move most loosely bound electron of a isolated neutral gas atom or molecule

if atom X has 6 protons,6 neutrons and 6 electrons and aton Z has 6 protons,7neutrons and 6 electrons,atom x and atom z are isotopes of the element

Answers

the answer is 89! okay thank you

Your science teacher removed the gas from a birthday balloon. They discovered that the gas is made of the element helium. Inside that atom is:
A. A new substance
B. Protons, neutrons and electrons
C. A different element
D. All of the above

Answers

D is the answer I think
The answer would be “B” because a substance and element represent a structure larger than a single atom. Please mark as Brainliest answer!

IUPAC name for BaSO3

Answers

Answer:

Barium Sulfite

Explanation:

Barium Sulfite

The IUPAC name for BaSO₃ is barium sulfite.

"Ba" stands for barium, which is the chemical symbol for the element with atomic number 56. Barium is an alkaline earth metal and belongs to Group 2 of the periodic table.

"SO₃" stands for sulfite, which is a polyatomic ion composed of one sulfur atom (S) and three oxygen atoms (O). The chemical formula for the sulfite ion is SO₃²⁻. The sulfur atom in the sulfite ion has a +4 oxidation state.

When barium (Ba) reacts with the sulfite ion (SO₃²⁻), they combine to form barium sulfite (BaSO₃). The balanced chemical equation for the reaction is:

Ba²⁺ + SO₃²⁻ → BaSO₃

Barium sulfite is an ionic compound, where the Ba²⁺ ion and the SO₃²⁻ ion are held together by electrostatic attractions (ionic bonds). In its solid form, barium sulfite appears as a white crystalline powder.

Learn more about IUPAC name from the link given below.

https://brainly.com/question/33646537

#SPJ6

Please help ASAP 100 points points help I will mark you as brainlister

Answers

this is lithium ion with a +1 charge

Lithium ion with 1+ charge

3.58 x 1023 molecules of propane C8H8 would occupy how much space at STP

Answers

Answer: At STP, a mole of gas takes up 22.4 Liters. The 22.4 Liters/mole quantity can be derived from the Ideal Gas Law, PV = nRT, plugging in STP conditions for P and T, and solving for V/n, which gets 22.4 Liters/mole.

Explanation:

Other Questions
write a letter to your friend telling him or her to do to remain healthy ~PLEASE HELP ME~The warming of the atmosphere by the trapping of heat being radiated to space is calleda)condensation b)evaporationc)the greenhouse effect d)radiation 75 (1+2z) simplified Bruce bought two books. One book costs $4.00 more than three times the other. Together, the two books cost him $72. After visiting several automobile dealerships, Richard selects the used car he wants. He likes its $10,000 price, but financing through the dealer is no bargain. He has $2,000 cash for a down payment, so he needs an $8,000 loan. In shopping at several banks for an installment loan, he learns that interest on most automobile loans is quoted at add-on rates. That is, during the life of the loan, interest is paid on the full amount borrowed even though a portion of the principal has been paid back. Richard borrows $8,000 for a period of four years at an add-on interest rate of 11 percent. What is the total interest on Richards loan? What is the total cost of the car? What is the monthly payment? What is the annual percentage rate (APR)? What are the three angle measures in thetriangle shown below?5x - 711x 43x + 1 DO NOT ANSWER IF YOU DO NOT KNOW, Will give brainliest, like, comment, and 5 points to answer Each of these is a pair of equivalent ratios, for each pair explain why they are equivalent. 5:1 and 15:310.2 and 25.5198:1,287 and 2:13 find the x intercept and y intercept of3x - 9y =18 Define symbolism.o the use of symbols to represent ideas or qualitieso the moral of the storyO the things that you bang together in bandO repetition of sound Plz help me, fast!Which statement about signal phrases is true? Select one: a. Signal phrases should be worded the same way throughout an informational text.b. Signal phrases are only needed when a writer uses a direct quote from an article.c. Signal phrases should provide just enough information to show the reader that the source is a valid one that can be trusted.d. Signal phrases should provide name, job, and source of every fact used in a text. replace the noun with a pronoun Liz and ray played tag 2(7y1)= 40 what is y? What plan will you do to keep the food stay cold longer if the powergo out On January 1, 2021, The Barrett Company purchased merchandise from a supplier. Payment was a noninterest-bearing note requiring five annual payments of $25,000 on each December 31 beginning on December 31, 2021, and a lump-sum payment of $150,000 on December 31, 2025. A 10% interest rate properly reflects the time value of money in this situation. Required: Calculate the amount at which Barrett should record the note payable and corresponding merchandise purchased on January 1, 2021. Put a lid on it! The supplier is considering two changes to reduce to 1% thepercentage of its large-cup lids that are too small. One strategy is to adjust themean diameter of its lids. Another option is to alter the production process,thereby decreasing the standard deviation of the lid diameters,a. If the standard deviation remains at o = 0.02 inch, at what value should thesupplier set the mean diameter of its large-cup lids so that only 1% are toosmall to fit?b. If the mean diameter stays at = 3.98 inches, what value of the standarddeviation will result in only 1% of lids that are too small to fit?c. Which of the two options in parts (a) and (b) do you think is preferable? Justifyyour answer. (Be sure to consider the effect of these changes on the percent oflids that are too large to fit.) Daisy made 6 phone calls in 13 hour. At that rate, how many phone calls can she make in 1 hour? What is the next fraction in this sequence? Simplify your answer.23 , 35 , 815 , 715 , ... 5. Michael wanted to see what kitchen cleaner worked best for cleaning her counters. He used Lysol, Clorox, Pine-sol, and just water. For each cleaner, he put 5 milliliters of grape juice on the counter, sprayed the cleaner, and wiped it with one paper towel. Which country was the first to sign a treaty of alliance with the UnitedStates? Please answer correctly, Ill give brainlest.