Answer:
CSS
Explanation:
cascading style sheets improves the design of html, and is combined with html.
what is destination email address
Answer:
Explanation:
The E-mail Destination allows you to send data from your forms in text format to various different email addresses.
How to reset apple watch after too many passcode attempts.
Answer:
"Press and hold the Digital Crown, then tap Reset. After the reset finishes and your Apple Watch restarts, you need to pair your Apple Watch with your iPhone again—open the Apple Watch app on your iPhone, then follow the instructions shown on your iPhone and Apple Watch."
Explanation:
How to reset apple watch after too many passcode attempts is mentioned below.
What is passcode ?A passcode is a string of digits or letters that is used to protect access to a computer, an account, or data. It serves the same purpose as a password but usually only has a short string of digits, making it simpler to enter on gadgets with constrained input options, like a smartphone or tablet. Typically, a passcode is used to unlock a device, grant access to a specific app or feature, or verify a user's identity when making a purchase. To increase security and prevent unauthorized access, passcodes are typically set by the user and can be changed as needed.
Here's a step-by-step process to reset an Apple Watch after too many passcode attempts:
Put your Apple Watch on its charger and make sure that it has a charge.
On your iPhone, open the Watch app.
Tap the My Watch tab, then tap your Apple Watch at the top of the screen.
Tap General, then tap Reset.
Tap Erase Apple Watch Content and Settings.
Enter your Apple ID password, then tap Turn Off.
Wait for the process to finish.
After the reset is complete, you'll need to pair your Apple Watch with your iPhone again and set it up as new.
Note: If you can't reset your Apple Watch using the above steps, you may need to use the Apple Support website or contact Apple support for assistance.
To know more about passcode check:
https://brainly.com/question/14637277
#SPJ6
Darla is going to start writing the HTML code for a web page. What would she start with?
Answer:
opening
Explanation:
Your answer would be opening
you can turn the Caps lock key on, and that will give you a more _______ curser.
accurate
hope this helps
scav
list and explain 3 commonly used high-level languages
look the image
hope it helps
Why don't we use a for each loop when doing a sequential (linear) search?
Answer:Linear search (aka Sequential Search) is the most fundamental and important of all algorithms. It is simple to understand and implement, yet there are more subtleties to it than most programmers realize.
The input to linear search is a sequence (e.g. an array, a collection, a string, an iterator, etc.) plus a target item. The output is true if the target item is in the sequence, and false otherwise. If the sequence has n items, then, in the worst case, all n items in the sequence must be checked against the target for equality. Under reasonable assumptions, linear search does O(n) comparisons on average. In practice, this is often too slow, and so, for example, BinarySearching or hashing or TreeSearching are speedier alternatives.
Here's an implementation of linear search on an array (in Java):
Explanation:
What is the difference between a program counter, an instruction register, and the program status word
Answer:
You will need both always. The program
counter (PC) holds the address of the next instruction
to be executed, while the instruction register (IR) holds
the encoded instruction. Upon fetching the instruction,
the program counter is incremented by one "address
value" (to the location of the next instruction)
What type of dns record is used to map hostnames to ipv6 addresses?.
Answer:
IP Version 6 Address record (AAAA Record)
Explanation:
Address Mapping record (A Record)—also known as a DNS host record, stores a hostname and its corresponding IPv4 address. IP Version 6 Address record (AAAA Record)—stores a hostname and its corresponding IPv6 address.
Elena wrote the following code in Scratch to have the sprite move and then turn around. However, the code does not work as expected. What should be done to fix the error?
Change "move 20 steps" to "move 10 steps"
Change "turn left 180 degrees" to "turn left 90 degrees"
Change "turn left 90 degrees" to "turn right 180 degrees"
Change "turn right 90 degrees" to "turn left 90 degrees"
Sprites are program objects used to create animations
What should be done to fix the error is to (d) Change "turn right 90 degrees" to "turn left 90 degrees"
How to fix the errorFrom the question, we have the following highlights
The sprite is to move forwardAnd then turns aroundThe first line of the code segment moves the sprite 20 steps forward;
This step is correct, and it does not need to be changed.
For the sprite to turn, then it must rotate 360 degrees in a direction.
From the code segment, we have the following rotations
180 degrees left90 degrees left90 degrees rightWhen the angles of rotation are added, we have:
[tex]\theta = 180 + 90 - 90[/tex]
[tex]\theta = 180[/tex]
i.e. the code segment implements a 180 degrees rotation
In order to turn the sprite around, she needs to change the 90 degrees right to 90 degrees left.
So, we have:
[tex]\theta = 180 + 90 + 90[/tex]
[tex]\theta = 360[/tex]
Hence, the fix to the error is (d) Change "turn right 90 degrees" to "turn left 90 degrees"
Read more about sprites at:
https://brainly.com/question/26549550
An _________ conditon is when a computed result goes beyond what can be stored given the computer's architecture.
Which of the following is not harmful to the computer?
a) Trojan
b) Rootkit
c)Malware
Answer:
rootkit
Explanation:
because Trojan and malware will both harm your computer trust me
Tim would like to send a confidential, encrypted message to Kellie using asymmetric cryptography. What key should Tim use to create the message?
Tim uses the public key is used to create the message
Asymmetric cryptographyAsymmetric (public key) encryption allows the sharing of an encrypted message without a shared secret key. Public key encryption uses two keys, one public and one private. To send a message, asymmetric algorithm with the public key is used to create the message while the private key is used for the message decryption. The encryption function can only encrypt data.
Find out more on Asymmetric cryptography at: https://brainly.com/question/4357828
how to write an algorithm to find area and perimeter of diamond .
Dominic is an industrial designer who's developing an office chair that is more comfortable for tall individuals. He hires a software engineering firm to develop a simulation that can simulate the chair used by a person working at a desk, and then come up with an estimate of the resulting comfort level.
Which detail is least necessary for this simulation?
A. The heights of the most popular office desks
B. The three-dimensional shape of the chair
C. The range of colors available for the chair’s fabric
D. The tendency of the chair to incline backward in response to pressure from the user
Answer:
C. The range of colors available for the chair’s fabric
hope this helps
scav
what is a procedure in a python?
Answer:
A procedure allows us to group together code blocks under a name of a certain condition / nest.
Lourdes is going to create a company logo. She will create it in a vector format so that she can resize it without distortion. Which software works best for her needs
Explanation:
military
hope this helps you
Your Windows system boots to a blue screen stop error and no Start screen or desktop. What do you do first
Answer:
Attempt to boot into Windows RE using the Windows setup DVD or a recovery Drive
Explanation:
I need help NOW with my java script!! 1. What will the code below output to the console and why? const person = {
age: 20,
name: 'Ben'
};
const peopleArray = [person, person, person];
peopleArray[1].name = 'Joe';
console.log(peopleArray[0].name);
Using a JS console when using the following code:
const person = {
age: 20,
name: "Ben"
};
const peopleArray = [person, person, person];
peopleArray[1].name = 'Joe';
console.log(peopleArray[0].name); (Returns: Joe)
An IPv4 address has 32 bits, so there are 232 (over 4 billion) possible IPv4 addresses. Since the Internet is gaining devices quickly, we will soon surpass 232 unique devices on the Internet.
In anticipation of all the new Internet devices, we are in the process of switching to IPv6, which uses 128 bits for a single address. That’s 96 extra bits to represent one address!
Which of the following statements correctly describes how many more addresses will be possible to represent by switching from IPv4 to IPv6?
i. 96 more addresses can be represented with IPv6
ii. 296 more addresses can be represented with IPv6
iii. 96 times as many addresses can be represented with IPv6
iv. 296 times as many addresses can be represented with IPv6
Answer:
Explanation:IPv4 is almost used up due to the constant increase in devices so therefore IPv6 was implemented to combat this issue, IPv6 uses 128 bit addresses, allowing 3.4 x 1038 unique IP addresses. This is equal to 340 trillion trillion trillion IP addresses. IPv6 is written in hexadecimal notation, separated into 8 groups of 16 bits by the colons, thus (8 x 16 = 128) bits in total. Which essentially means both me and you wont see IPv6 run out in our life times nor will you kids kids.
The 96 times as many addresses can be represented with IPv6. Hence option 3 is correct.
What are addresses?Addresses are defined as the address, street name, and town name where a person resides or works and where mail can be sent: her home and office addresses. a shift in address. Memory addresses are used by computer programs to execute machine code and store and retrieve data. A device or CPU uses a memory address as a specific identifier to track data. The CPU can keep track of where each memory byte resides in the system by using this binary address, which is determined by an ordered and finite sequence.
The magnitude of IP addresses is the fundamental distinction between IPv4 and IPv6. Unlike IPv6, which has a 128-bit hexadecimal address, IPv4 has a 32-bit address. Compared to IPv4, IPv6 has a broad address space and a straightforward header.
Thus, the 96 times as many addresses can be represented with IPv6. Hence option 3 is correct.
To learn more about addresses, refer to the link below:
https://brainly.com/question/29065228
#SPJ5
What is the use of the Mode option shown in the given image?
The Mode option is used to change how the colors in a particular layer blend with colors that are contained in another layer.
What is Photoshop?Photoshop can be defined as a software program that is designed and developed to enable the use of an artistic process and tools for the creation of art works or graphic designs such as logos.
In a graphic design software such as Adobe Photoshop, the Mode option is used to change how the colors in a particular layer blend with colors that are contained in another layer.
In conclusion, the Mode option is used to blend colors for Photoshop layers.
Read more on layers here: https://brainly.com/question/14354492
Make your own Multimedia Presentation using Microsoft Powerpoint. The presentation must be all
about yourself. Make it presentable with animations and transformations, attach file, audio or
images to make it more fun and exciting. Limit it to 5 slides only, tell something about yourself,
your hobbies, dreams, aspirations, achievements, likes and dislikes, etc. Attach your output upon
submission to the assignment given.
How would you write 100111 as a byte
Answer:
100111 converts to 39 byte
Explanation:
Hope this helped
Linda works from home occasionally and needs to set up her computer at work so she can remote in from her home office. Which tools should she use
Explanation:
Check the type of hard drive installed.
hope this helps you ❣️
A list block can be defined under another list is called as _ list
Answer:
Nested list is the term used to define it..
Answer:
Nested
Explanation:
Your answer is A list block can be defined under another list is called as NESTED list.
I hope it helps! Have a great day!
Lilac~
Difference between passing argument or return value
The argument is any string you pass to your function when you call it. The return value is the number of words.
In this exercise we have to use python programming knowledge to describe a function, so the code is:
The code is in the attached image.
What is string in programming?Strings are strings of characters that store textual data and, therefore, can store information for the most diverse purposes. The content of a string can represent a fact in itself, or information.
In a simpler way we have that the code in python will be:
#include <stdio.h>
#include <string.h>
int main()
{
/* String Declaration*/
char nickname[20];
printf("Enter your Nick name:");
/* I am reading the input string and storing it in nickname
* Array name alone works as a base address of array so
* we can use nickname instead of &nickname here
*/
scanf("%s", nickname);
/*Displaying String*/
printf("%s",nickname);
return 0;
}
See more about python at brainly.com/question/26104476
Which is not a method for updating your dts personal profile?.
An insurance organization has data on a large number of claims made by policyholders. The management has a process in place to regularly check the data warehouse for fake claims. Which application of data mining does the organization use? A. market segmentation B. customer retention C. fraud detection D. direct marketing
The application of data mining the organization uses is known as : Fraud detection.
What is data mining?Data mining refers to the process of retrieving data that can be worked on from a large set of data, to solve business problems and reduce risk.
In a data mining process, the aim is to find anomalies and correlation so that outcomes can be predicted using different types of techniques.
Hence, the application of data mining the organization uses is known as fraud detection.
Learn more about data mining here : https://brainly.in/question/2000228
Answer:
C. Fraud Detection
Explanation:
Byte pair encoding is a data encoding technique. The encoding algorithm looks for pairs of characters that appear in the string more than once and replaces each instance of that pair with a corresponding character that does not appear in the string. The algorithm saves a list containing the mapping of character pairs to their corresponding replacement characters.
For example, the string "THIS_IS_THE_BEST_WISH" can be encoded as "%#_#_%E_BEST_W#H" by replacing all instances of "TH" with "%" and replacing all instances of "IS" with "#".
For which of the following strings is it NOT possible to use byte pair encoding to shorten the string’s length?
a) "BANANA"
b) "LEVEL_UP"
c) "MEET_ME_LATER"
d) "NEITHER_HERE_NOR_THERE"
Answer:
The encoding algorithm looks for pairs of characters that appear in the string more than once and replaces each instance of that pair with a corresponding character that does not appear in the string. ... Byte pair encoding is an example of a lossy transformation because it discards some of the data in the original string.
Explanation:
hope it helps!!
which choice is not a form of antivirus scanning that compares known virus patterns to scanned files
The choice that is not a form of antivirus scanning that compares known virus patterns to scanned files is called; Heuristic scanning
Antivirus DetectionThe correct answer is Heuristic Scanning from the options seen online. This is because Heuristic scanning is a method utilized by many computer antivirus programs to detect previously unknown computer viruses, as well as new variants.
Thus, heuristic scanning doesn't compare known virus patterns to scanned files.
Read more about antivirus detection at; https://brainly.com/question/17209742
The range of port 1024 to port 4999 is the usual range for ________ port numbers. Group of answer choices well-known ephemeral both A and B neither A nor B
The range of port 1024 to port 4999 is the usual range for EPHEMERAL port numbers. It is a communication endpoint.
What is an ephemeral port?An ephemeral port can be defined as an endpoint for transporting a layered protocol of the IP suite.
The ephemeral port is always employed during a very short interval of time in a given session.
Some number examples of ephemeral ports include, among others, HTTPS = 443, HTTP = 80, and RPC = 13.
Learn more about ephemeral ports here:
https://brainly.com/question/2663754