A hot stovetop transfers thermal energy by the method of

This is due to the contact between the bottom of a
cooler pot with the warmer burner on the stove.

Answer:

3V

Explanation:

From the question given above, we can see clearly that the resistors are arranged in parallel connection. Hence, the same voltage will pass through the resistors i.e

Total voltage = voltage of 3 Ω = voltage of 6 Ω

From the question given above,

The total voltage = 3 V

Therefore,

Voltage of 3 Ω = total voltage

Voltage of 3 Ω = 3V

Thus, option 3 gives the correct answer to the question.

Answer: Potential energy is at almost 0%, and kinetic energy is at almost 100%

Explanation: took the exam

The roller coaster will lost its potential energy when its starts to excite the vertical loop and its kinetic energy will be maximum. Hence, option D is correct.

Kinetic energy of a body is generated by its motion. Kinetic energy is proportional to the mass and square of the velocity of the object. Thus, as the speed of the object increase, kinetic energy increases.

Potential energy of a body is generated by virtue of its position. When a moving body slows down to stop, it gains potential energy and its kinetic energy starts decreasing.

When the roller coaster excites the vertical loop of the closed path, it loses its potential energy and  kinetic energy increases to maximum since its moving the down loop with greater velocity. Thus, option D is correct.

To find more on kinetic energy, refer here:

https://brainly.com/question/26472013

#SPJ2

Answer:

pH value is between 6.5 and 6.8

Explanation:

Explanation:

Milk fresh from the cow typically has a pH between 6.5 and 6.7. The pH of milk changes over

Explanation:

When you pull the sock off of the blanket, the socks gain electrons out of blanket. This makes socks slightly negatively charged. The potential energy of the socks rise whereas potential energy of the blanket reduces. This happens because of exchange of electrons between socks and blanket.

Answer:

Average speed is 60 km/hr whereas average velocity is 0 km/ hr.

Explanation:

The average speed of the boat is 60 km/ hr while on the other hand, the average velocity of the boat is 0 km/ hr because average speed is the total distance covered by the boat in total time and average velocity is the displacement covered by the boat in total time. The total distance covered by the boat is 60 km and the total time is 60 minutes which is equals to one hour so the answer is 60 km/hr whereas the displacement is the shortest distance between initial and final position which is 0 in this case so 0 divided by 60 minutes or one hour is also 0.

Answer:65.28

Explanation:

A long string has a standing wave with 2 loops at a frequency. The speed of the waves in the string is 65.28 m/s

The frequency is the number of cycles completed per second.

Given the length of the string l = is 1.70 m, no of loops n =2, frequency of wave f =38.4 Hz, then the speed of the waves is

f = nv /2l

Substitute the following values, we get

v = 38.4 x 2 x 1.70 / 2

v =65.28 m/s

Thus, the speed of the waves in the string is 65.28 m/s.

Learn more about frequency.

https://brainly.com/question/14316711

#SPJ2

Answer

?????

Explanation:

Answer:

Thus 1 Ampere is the current is defined as flow of 1 coulomb charge through a conductor in 1 second.

Explanation:

Hope it helps

Answer:

36.m/s/s

Explanation:

Answer:

A) It requires extremely high pressure.

Explanation:

The reasons why we haven't been able to harness power from fusion is that its energy requirements are unbelievably, terribly high.

The correct statement is: "nuclear fusion requires extremely high pressure."

To find the correct statement among all the options, we need to know about nuclear fusion.

What is nuclear fusion?

How much pressure is required for nuclear fusion?

How much energy is released during nuclear fusion?

What is the comparison of energy that released in nuclear fusion and fission?

How does we get energy in the nuclear fusion reaction?

Thus, we conclude that option (A) is correct.

Learn more about nuclear fusion here:

https://brainly.com/question/17870368

#SPJ2

Answer:

t = 0.28 seconds

Explanation:

Given that,

Force acting on a firework, F = 700 N

The momentum of the firework, p =200 kg-m/s

We need to find the time before it explodes. Ket the time be t. We know that, the rate of change of momentum is equal to external frce. So,

[tex]F=\dfrac{P}{t}\\\\t=\dfrac{P}{F}\\\\t=\dfrac{200}{700}\\t=0.28\ s[/tex]

So, the required time is equal to 0.28 seconds.

The kinetic energy is calculated by work done, The work done is equal to the change in kinetic energy when the object is at rest.

Kinetic energy (KE) is calculated using the formula:

KE = (1/2) × mass × velocity²

However, if you don't have the velocity value, it is not possible to calculate the kinetic energy accurately. Velocity is a crucial component in determining kinetic energy because it quantifies the object's speed and direction of motion.

But there is a special case when the object is at rest the change in velocity is equal to the work done.

Therefore, The kinetic energy is calculated by work done, The work done is equal to the change in kinetic energy when the object is at rest.

To know more about kinetic energy:

https://brainly.com/question/999862

#SPJ6

Answer:

The speed of the student just before she lands, v₂ is approximately 8.225 m/s

Explanation:

The given parameters are;

The mass of the physic student, m = 43.0 kg

The height at which the student is standing, h = 12.0 m

The radius of the wheel, r = 0.300 m

The moment of inertia of the wheel, I = 9.60 kg·m²

The initial potential energy of the female student, P.E.₁ = m·g·h₁

Where;

m = 43.0 kg

g = The acceleration due to gravity ≈ 9.81 m/s²

h = 12.0 h

∴ P.E.₁ = 43 kg × 9.81 m/s² × 12.0 m = 5061.96 J

The kinetic rotational energy of the wheel and kinetic energy of the student supporting herself from the rope she grabs and steps off the roof, K₁, is given as follows;

[tex]K_1 = \dfrac{1}{2} \cdot m \cdot v_{1}^2+\dfrac{1}{2} \cdot I \cdot \omega_{1}^2[/tex]

The initial kinetic energy, 1/2·m·v₁² and the initial kinetic rotational energy, 1/2·m·ω₁² are 0

∴ K₁ = 0 + 0 = 0

The final potential energy of the student when lands. P.E.₂ = m·g·h₂ = 0

Where;

h₂ = 0 m

The final kinetic energy, K₂, of the wheel and student is give as follows;

[tex]K_2 = \dfrac{1}{2} \cdot m \cdot v_{2}^2+\dfrac{1}{2} \cdot I \cdot \omega_{2}^2[/tex]

Where;

v₂ = The speed of the student just before she lands

ω₂ = The angular velocity of the wheel just before she lands

By the conservation of energy, we have;

P.E.₁ + K₁ = P.E.₂ + K₂

∴ m·g·h₁ + [tex]\dfrac{1}{2} \cdot m \cdot v_{1}^2+\dfrac{1}{2} \cdot I \cdot \omega_{1}^2[/tex] = m·g·h₂ + [tex]\dfrac{1}{2} \cdot m \cdot v_{2}^2+\dfrac{1}{2} \cdot I \cdot \omega_{2}^2[/tex]

Where;

ω₂ = v₂/r

∴ 5061.96 J + 0 = 0 + [tex]\dfrac{1}{2} \times 43.0 \, kg \times v_{2}^2+\dfrac{1}{2} \times 9.60 \, kg\cdot m^2 \cdot \left (\dfrac{v_2}{0.300 \, m} }\right ) ^2[/tex]

5,061.96 J = 21.5 kg × v₂² + 53.[tex]\overline 3[/tex] kg × v₂² = 21.5 kg × v₂² + 160/3 kg × v₂²

v₂² = 5,061.96 J/(21.5 kg + 160/3 kg) ≈ 67.643118 m²/s²

v₂ ≈ √(67.643118 m²/s²) ≈ 8.22454363 m/s

The speed of the student just before she lands, v₂ ≈ 8.225 m/s.

Answer:

In a machine, friction reduces the mechanical advantage, or the ratio of output to input: an automobile, for instance, uses one-quarter of its energy on reducing friction. Yet, it is also friction in the tires that allows the car to stay on the road, and friction in the clutch that makes it possible to drive at all

Explanation:

hope it will help you

Answer:

Explanation:

Explanation: total displacement =3√2m. and total distance covered=14m. I hope this is right and helps u.

Answer:

B

Explanation:

atoms with equal or similar electronegativity form covalent bonds in which the valence electrons are shared between the two atom

During the formation of a chemical bond, the expected result is that the electrons will complete a noble gas configuration in both atoms. Hence, option (C) is correct.

The given problem is based on the concepts and fundamentals of chemical bonds. The chemical bonds between the two atomic species is formed by sharing the electrons.

Thus, we can conclude that during the formation of a chemical bond, the expected result is that the electrons will complete a noble gas configuration in both atoms. Hence, option (C) is correct.

Learn more about the chemical bonds here:

https://brainly.com/question/23882847

Answer:

-7.5

Explanation:

edge 2021

Answer:

1. (a) The final velocity is 20 m/s

(b) The distance travelled is20 meters

2. The distance travelled by the train in the 30 seconds is 825 meters

3. The most correct option is;

(d) 53 km

4. The heat, developed by the electric iron is 15,000 joules

5. a) In the first network the resistance between A and B is 2 Ω

b) In the second network the resistance between A and B is 4Ω

c) In the third network the resistance between A and B is 6Ω

d) In the fourth network the resistance between A and B is 2Ω

Explanation:

1. (a) The parameters of the cheetahs motion are;

The initial motion (velocity) of the cheetah = 0 m/s (The cheetah starts from rest)

The acceleration of the cheetah, a = 2 m/s²

The duration of the acceleration of the cheetah, t = 10 seconds

The kinematic equation of the motion of uniform acceleration, of the cheetah can be written in the following form;

v = u + a·t

s = u·t + 1/2·a·t²

Where;

v = The final velocity

u = The initial velocity = 0 m/s

a = The acceleration of the cheetah = 2 m/s²

s = The distance traveled

∴ v = 0 + 2 × 10 = 20

The final velocity, v = 20 m/s

(b) From s = u·t + 1/2·a·t², we have;

s = 0 × 10 + 1/2 × 10 × 2² = 20

The distance travelled, s = 20 meters

2. The given details of the motion of the train are;

The initial velocity of the train, u = 20 m·s⁻¹

The acceleration of the train, a = 0.5 m·s⁻²

The duration of the train's acceleration, t = 30 seconds

Therefore, the distance travelled, 's', is given by; s = u·t + 1/2·a·t²

∴ s = 20 × 30 + (1/2) × 0.5 × 30² = 825

The distance travelled by the train in the 30 seconds, s = 825 meters

3. The given distance the truck covers with the average speed of 80 km/h, d₁ = 40 km

The distance the truck then covers with the average speed of 40 km/h, d₂ = 40 km

[tex]Average \ speed = \dfrac{Total \ distance}{Time}[/tex]

[tex]\therefore time, \, t = \dfrac{Total \ distance}{Average \ speed}[/tex]

The time it takes the truck to cover the 40 km at 80 km/h = 40 km/(80 km·h) t₁ = 0.5 hour

The time it takes the truck to cover the 40 km at 80 km/h = 40 km/(40 km·h) t₂ = 1 hour

The total time taken to cover both 40 km distances, t = t₁ + t₂

∴ The total time taken to cover both 40 km distances, t = (0.5 + 1) hour = 1.5 hours

The total distance covered at both speeds, d = d₁ + d₂

∴ d = 40 km + 40 km = 80 km

The average speed of the truck for the total distance, [tex]v_{average}[/tex] = d/t

∴ [tex]v_{average}[/tex] = 80 km/1.5 hours = 53.[tex]\overline 3[/tex] km/h ≈ 53 km/h

The average speed of the truck for the total distance, [tex]v_{average}[/tex] ≈ 53 km/h

The correct option is (d) 53 km

4. The heat, 'H', developed by the electric iron is given by the following formula;

H = I²·R·t

Where;

I = The current flowing in the electric iron = 5 A

R = The resistance of the iron = 20Ω

t = The time duration of the flow of the current = 30 s

∴ H = (5 A)² × 20 Ω × 30 s = 15,000 joules

The heat, developed by the electric iron, H = 15,000 joules

5. Let 'R' represent the resistance between A and B in each network

a) For the first network, we have;

1/R = 1/(2 + 2) + 1/(2 + 2) = 1/4 + 1/4 = 1/2

∴ R = 2 Ω

∴ The resistance between A and B is 2 Ω

b) For the second network, we have;

R = 1/(1/2 + 1/2) + 3 = 4

R = 4Ω

∴ The resistance between A and B is 4 Ω

c) For the third network, we have;

R = 2 + 1/(1/4 + 1/4) + 2 = 6

R = 6Ω

∴ The resistance between A and B is 6 Ω

d) For the fourth network, we have;

R = 1/(1/2 + 1/2) + 1/(1/2 + 1/2) = 2

R = 2Ω

∴ The resistance between A and B is 2 Ω

Answer:

[tex]Vg=200mile/hr[/tex]

[tex]\theta=153 \textdegree[/tex]

Explanation:

From the question we are told that:

Plane airspeed [tex]v_p=190mil/h[/tex]

Plane direction [tex]\angle=150 \textdegree[/tex]

Wind current speed [tex]V_w=30mil/h[/tex]

Wind direction [tex]\angle=150 \textdegree[/tex]

Generally the vector form of the forces is mathematically given by

For plane

[tex]\angle Q_p=90-150 \textdegree[/tex]

[tex]V_p=170(cos60 \textdegree ,sin60 \textdegree)[/tex]

[tex]V_p=(85,-147.224)[/tex]

For wind

[tex]\angle Q_w=90-170 \textdegree[/tex]

[tex]V_w=30(cos-80 \textdegree ,sin-80 \textdegree)[/tex]

[tex]V_w=(5.2,-29.54)[/tex]

Generally the equation for resultant force is mathematically given by

[tex]v_r=V_a+V_w[/tex]

[tex]v_r=(85,-147.224)+(5.2,-29.54)[/tex]

[tex]v_r=(90.21,-176.76)[/tex]

[tex]v_r=198.45\angle -63[/tex]

Therefore ground speed

[tex]V_g=198.5miles/hr[/tex]

[tex]Vg=200mile/hr[/tex]

Direction

[tex]\theta=(90+63)=153 \textdegree[/tex]

[tex]\theta=153 \textdegree[/tex]

Answer:

Explanation:

Its resistor

Answer:

40.6°

Explanation:

The angle of refraction, when light passes from air into water at an angle of 60° from the normal, is 40.6°

It states that the ratio of sine of angle of incidence and angle of refraction is equal to the refractive index of second medium to the first medium.

sini/sinr =n₂ / n₁

Given, the light passes from air into water at an angle of 60° from the normal, the angle of incidence i = 60°, refractive index of air n₁ =1, refractive index of water n₂ = 1.333, then the angle of refraction is

sinr = sini x (n₁/n₂)

Plug the values, we get

sinr = sin60 x (1/1.333)

sinr = 40.6°

The angle of refraction is less than angle of incidence due to refraction.

Thus, the angle of refraction is 40.6°

Learn more about Snell's law.

https://brainly.com/question/10112549

#SPJ2

Answer:

a = 4 m/s²

Explanation:

Given: 28 N, 7 kg

To find: Acceleration (a)

Solution: To find (a), divide force by weight

A = F ÷ m

=  28 ÷  7

= 4 m/s²

Newtons are derived units, equal to 1 kg-m/s². In other words, a single Newton is equal to the force needed to accelerate one kilogram one meter per second squared.

Answer:

Ok.............

hfjjjjjjlnggmm

Answer:

it is B

Explanation:

it is a compound lol

Answer:

The first option- Sun shining through clouds

Explanation:

Answer:

""gravity. the force that pulls on objects and causes acceleration if the objects are not balanced by an opposing force. speed. distance traveled per unit time. Newton's Second Law of Motion.""

Explanation:

Answer:

it is B

Explanation:

B

Statement B describes one way that nuclear fission differs from nuclear fusion in that nuclear fission can occur spontaneously.

The utilization of nuclear reactions to generate energy is known as a nuclear power. Nuclear fission, nuclear decay, and nuclear fusion processes are all sources of nuclear energy.

Nuclear power facilities currently produce the great bulk of the electricity generated by nuclear fission of uranium and plutonium.

Statement B describes one difference between nuclear fission and nuclear fusion in that nuclear fission can occur spontaneously.

Hence,option B is correct.

To learn more about nuclear power refer to the link;

https://brainly.com/question/9859575

#SPJ5