A fuel-filled rocket is at rest. It burns its fuel and expels hot gas. The gas has a momentum of 1,500 kg m/s backward. So, The momentum of the rocket is -1500 kg m/s.
According to the law of conservation of momentum, in a closed system, the total momentum before and after a process remains constant.
A fuel-filled rocket that is initially at rest expels hot gas as it burns its fuel. The gas has a momentum of 1500 kg m/s backward.
We are required to determine the momentum of the rocket.
Consider the fuel-filled rocket as a system.
We have: Momentum before the burn = 0 kg m/s (since the rocket was at rest initially)Momentum after the burn = momentum of the expelled gas
We can therefore say that the initial momentum of the system was zero (0), and after the burn, the total momentum of the system remains the same as the momentum of the expelled gas.
Therefore: Momentum of rocket = - momentum of expelled gas
The negative sign signifies that the rocket's momentum is in the opposite direction of the expelled gas.
Hence, the momentum of the rocket is -1500 kg m/s.
For more questions on momentum
https://brainly.com/question/1042017
#SPJ8
In a location in outer space far from all other objects, a nucleus whose mass is 3.894028 x 10⁻²⁵ kg and that is initially at rest undergoes spontaneous alpha decay. The original nucleus disappears, and two new particles appear: a He-4 nucleus of mass 6.640678 x 10⁻²⁷ kg (an alpha particle consisting of two protons and two neutrons) and a new nucleus of mass 3.827555 x 10 kg. These new particles move far away from each other, because they repel each other electrically (both are positively charged). Because the calculations involve the small difference of (comparatively large numbers, you need to keep seven significant figures in your calculations, and you need to use the more accurate value for the speed of light, 2.99792e8 m/s. Choose all particles as the system. Initial state: Original nucleus, at rest. Final state: Alpha particle + new nucleus, far from each other. (a) What is the rest energy of the original nucleus? Give seven significant figures. (b) What is the sum of the rest energies of the alpha particle and the new nucleus? Give seven significant figures. (c) Did the portion of the total energy of the system contributed by rest energy increase or decrease? (d) What is the sum of the kinetic energies of the alpha particle and the new nucleus?
(a) The rest energy of the original nucleus is 3.50397 × 10⁻¹⁰ J.
(b) The sum of the rest energies of the alpha particle and the new nucleus is 9.36837 × 10⁻¹⁰ J.
(c) The portion of the total energy of the system contributed by rest energy decreased.
(d) Sum of the kinetic energies of the alpha particle and the new nucleus is 0 J
a) The rest energy of the original nucleus can be calculated by using the mass-energy equivalence equation.
The equation is as follows;
E = mc²
Where,
E = Rest energy of the object
m = Mass of the object
c = Speed of light
Substitute the values,
E = (3.894028 × 10⁻²⁵ kg) × (2.99792 × 10⁸ m/s)²
= 3.50397 × 10⁻¹⁰ J.
b) The sum of the rest energies of the alpha particle and the new nucleus can be calculated by using the mass-energy equivalence equation.
The equation is as follows;
E = mc²
Rest energy of the Alpha particle,
E₁ = m₁c²
= (6.640678 × 10⁻²⁷ kg) × (2.99792 × 10⁸ m/s)²
= 5.92347 × 10⁻¹⁰ J
Rest energy of the new nucleus,
E₂ = m₂c²
= (3.827555 × 10⁻²⁵ kg) × (2.99792 × 10⁸ m/s)²
= 3.44490 × 10⁻¹⁰ J
The sum of the rest energies of the alpha particle and the new nucleus = E₁ + E₂
= 5.92347 × 10⁻¹⁰ J + 3.44490 × 10⁻¹⁰ J
= 9.36837 × 10⁻¹⁰ J
c) The portion of the total energy of the system contributed by rest energy decreased.
Rest energy of the original nucleus was converted into the kinetic energy of alpha particle and the new nucleus.
So, the total energy of the system remains the same. This is according to the Law of Conservation of Energy.
d) The sum of the kinetic energies of the alpha particle and the new nucleus can be calculated by using the following formula;
K = (1/2)mv²
Where,
K = Kinetic energy
m = Mass of the object
v = Velocity of the object
Kinetic energy of alpha particle, K₁ = (1/2) m₁v₁²
The alpha particle is formed by the decay of the original nucleus.
The original nucleus was initially at rest.
Therefore the kinetic energy of the alpha particle,K₁ = 0.
Kinetic energy of new nucleus, K₂ = (1/2) m₂v₂²
The new nucleus moves far away from the alpha particle.
Therefore, the initial velocity of the new nucleus is 0.
Hence, its kinetic energy, K₂ = 0
Sum of the kinetic energies of the alpha particle and the new nucleus = K₁ + K₂= 0 J + 0 J= 0 J
Learn more about the rest energy:
brainly.com/question/32399627
#SPJ11
A 2.00-µF and a 7.00-µF capacitor can be connected in series or parallel, as can a 33.0-kΩ and a 100-kΩ resistor. Calculate the four RC time constants possible from connecting the resulting capacitance and resistance in series.
(a) resistors and capacitors in series
s
(b) resistors in series, capacitors in parallel
s
(c) resistors in parallel, capacitors in series
s
(d) capacitors and resistors in parallel
s
Answer: options (a), (b), (c), and (d) all have different time constants.
The time constant of an RC circuit is the time it takes for the voltage across the capacitor to reach 63.2% of its maximum possible value. This is true no matter how the resistor and capacitor are connected. Capacitors and resistors can be connected in series or parallel. A 2.00-µF and a 7.00-µF capacitor can be connected in series or parallel, as can a 33.0-kΩ and a 100-kΩ resistor.
Therefore, the four RC time constants possible from connecting the resulting capacitance and resistance in series are:
(a) Resistors and capacitors in series: R = 33.0 kΩ + 100 kΩ = 133 kΩC = 1 / (1/2.00 µF + 1/7.00 µF) = 1.5 µFRC time constant = R x C = 133 kΩ × 1.5 µF = 199.5 seconds.
(b) Resistors in series, capacitors in parallel: R = 33.0 kΩ + 100 kΩ = 133 kΩC = 2.00 µF + 7.00 µF = 9.00 µFRC time constant = R x C = 133 kΩ × 9.00 µF = 1197 seconds.
(c) Resistors in parallel, capacitors in series: R = 1 / (1/33.0 kΩ + 1/100 kΩ) = 25.5 kΩC = 1 / (1/2.00 µF + 1/7.00 µF) = 1.5 µFRC time constant = R x C = 25.5 kΩ × 1.5 µF = 38.25 milliseconds.
(d) Capacitors and resistors in parallel: R = 1 / (1/33.0 kΩ + 1/100 kΩ) = 25.5 kΩC = 1 / (1/2.00 µF + 1/7.00 µF) = 1.5 µFRC time constant = R x C = 25.5 kΩ × 1.5 µF = 38.25 milliseconds.
Therefore, options (a), (b), (c), and (d) all have different time constants.
Learn more about capacitor: https://brainly.com/question/21851402
#SPJ11
a) The general form of Newton's Law of cooling is: T(t) = Ta +(T(0) – Tale-ke where T is the temperature at any time, t in minutes. Ta is the surrounding ambient temperature in °C and k is the cooling con- stant. Consider a cup of coffee at an initial temperature, T(0) of 80°C placed into the open air at 15°C. After 5 minutes the coffee cools to 65°C. Using these initial conditions: i) Calculate the cooling constant, k. ii) What will be the temperature of the coffee after exactly 13 minutes? iii) How long will it take for the coffee to reach 25°C?
i) The cooling constant (k) is approximately 0.6667.
ii) After exactly 13 minutes, the temperature of the coffee will be around 19.3°C.
iii) It will take approximately 43.7 minutes for the coffee to reach a temperature of 25°C.
i) To calculate the cooling constant (k):
k = (T(0) - Ta - T(t)) / (T(t) - Ta)
= (80 - 15 - 65) / (65 - 15)
= 0.6667
ii) To find the temperature of the coffee after exactly 13 minutes, we can substitute t = 13, T(0) = 80, Ta = 15, and k = 0.6667 into the Newton's Law of cooling equation:
T(13) = 15 + (80 - 15 - 15)e(-0.6667*13) ≈ 19.3°C
iii) To determine the time required for the coffee to reach 25°C:
t = ln((T(0) - Ta) / (T(0) - T)) / k
= ln((80 - 15) / (80 - 25)) / 0.6667
≈ 43.7 minutes
learn more about Temperature here:
https://brainly.com/question/32515222
#SPJ4
L2 L3 N -Q11 380V BUS 3/PE: 50HZ -KM11 2 III. Calculation (20 points) -F12 4 6 V W PE M -M11 in the list below. (a)Breaker, and decide the setting multiples of in and iz. (1) Max current ipk: 35kA; 50kA: 65kA; 80KA (2) Rated current in: 16, 25, 32, 40, 50, 63, 80, 100, 125, 160, 200, 250 (b) Contactor 09,12,18,25,32,38, 40,50,65,80,95,115, 150,170,205,245,300 410,475,620 U 3 Parameters are as following: 1. Transformer: SN: 1600KVA UN: 0.38kV u%: 6% 2. Motor: PN: 22kW UN: 380V COSON: 0.85 3. Cable: 200m, copper wire, 10mm2 The resistivity of copper: 0.0185 mm2/m Calculation and Choose the right equipment (c) Thermal relay 0.63-1 1-1.6 1.6 -2.5 25-4 4-6 5.5-8 7-10 9-13 12-18 17-25 23-32 30-38 17-25 23-32 30-40 37-50 48-65 55-70 63-80 LRD1508 LRD1510 LRD 1512 LRD1514 LRD1516 LRD1521 LRD1522 LRD1532 LRD325L LRD332L LRD340L LRD350L LRD 365L LRD-3353C LRD-3355C LRD-3357C LRD-3359C LRD-3361C LRD-3363C
I. The resistivity of copper being 0.0185 mm²/m. II. The appropriate breaker to be used for the circuit should have a maximum current rating of 80 A and a breaking capacity of 50 kA. III. The thermal overload relay to be selected from the given list of relays for the following motor is LRD1508.
I. Data (10 points). A 22kW motor is connected to a 1600kVA transformer rated at 0.38kV and a line to line voltage of 380V. The cos ø = 0.85, and cable length is 200 m with a copper wire of 10 mm² with the resistivity of copper being 0.0185 mm²/m.
II. Circuit Breaker (10 points)The first step in circuit breaker selection is to determine the short-circuit current at the supply point. Then, the breaking capacity of the circuit breaker required to interrupt the short-circuit current is determined. The short-circuit current is calculated as follows: Isc = (3 × Un × k) / (Ud × √3)where Un = 0.38 kVk = 6% (0.06)Ud = 410 V (Voltage drop). Isc = (3 × 0.38 × 1000 × 0.06) / (410 × √3)Isc = 2.8 kA. The short-circuit current is 2.8 kA. The selection of the circuit breaker should be made in such a way that it should be able to interrupt the short-circuit current and also capable of handling the maximum load current.
III. Thermal Relay (10 points): The thermal overload relay to be selected from the given list of relays for the following motor is LRD1508.
Let's learn more about motor:
https://brainly.com/question/28852537
#SPJ11
Sue is on planet X which is a distance 6.6x109 km from a certain star which has a radius 7000 km. Sue measures the maximum intensity of light on the surface of the planet to be 9000 W m2. Planet X has no atmosphere and so there is no absorption of light between the star and the surface of the planet. Calculate the temperature of the star, which can be assumed to be a black body. a. 6.1e5K O b. 5.78 K O c. 2.0e5K O d. 6.0e6 K e. 6.0e8 K
Sue is on planet X which is a distance 6.6x109 km from a certain star which has a radius 7000 km. the correct option is (a) [tex]6.1 * 10^5 K.[/tex]
To calculate the temperature of the star, we can use the Stefan-Boltzmann Law, which states that the power radiated by a black body is proportional to the fourth power of its temperature (T):
Power = σ * A * T^4
Where:
Power is the total power radiated by the star
σ is the Stefan-Boltzmann constant (approximately 5.67 × 10^-8 W/(m^2·K^4))
A is the surface area of the star
First, we need to calculate the surface area of the star. Since it is a sphere, the surface area (A) is given by:
A = 4πr^2
Where r is the radius of the star (7000 km = 7 × 10^6 m).
A = 4π * (7 × 10^6)^2
A = 4π * 4.9 × 10^13
A ≈ 2.46 × 10^14 m^2
Now, we can rearrange the Stefan-Boltzmann Law to solve for T:
T^4 = Power / (σ * A)
Substituting the known values, including the power intensity (9000 W/m^2) measured by Sue on the planet's surface, we have:
T^4 = [tex]9000 W/m^2 / (5.67 * 10^{-8} W/(m^2.K^4) * 2.46 * 10^{14} m^2)[/tex]
T^4 ≈ [tex]6.48 * 10^{11} K^4[/tex]
Taking the fourth root of both sides:
T ≈ (6.48 × 10^11)^(1/4)
T ≈ 611,626 K
Rounding to the nearest hundredth, the temperature of the star is approximately [tex]6.1 * 10^5 K.[/tex]
Therefore, the correct option is (a)[tex]6.1 * 10^5 K.[/tex]
Learn more about Boltzmann Law here:
https://brainly.com/question/30763196
#SPJ11
Which axis is drawn to the longest dimension of an elliptical orbit? Major Axis Minor Axis Eccentricity
The major axis is drawn to the longest dimension of an elliptical orbit.The minor axis, on the other hand, is drawn perpendicular to the major axis and represents the shortest dimension of the ellipse.
In an elliptical orbit, the major axis is the line segment that connects the two farthest points of the ellipse. It is also referred to as the longest dimension of the ellipse. The major axis passes through the center of the ellipse and is perpendicular to the minor axis.
The major axis determines the overall size and shape of the elliptical orbit. It represents the maximum distance between the two foci of the ellipse. The foci are the two fixed points within the ellipse, and the sum of their distances to any point on the ellipse remains constant.
By drawing the major axis, we can define the major axis length, which helps determine the size and scale of the elliptical orbit.
Learn more about elliptical orbit here:
https://brainly.com/question/31868148
#SPJ11
A radio station transmits isotropically (that is, in all directions) electromagnetic radiation at a frequency of 94.6 MHz. At a certain distance from the radio station, the intensity of the wave is I=0.355
wm?
a) What will be the intensity of the wave three times the distance from the radio station?
b) What is the wavelength of the transmitted signal?If the power of the antenna is 8 MW.
c) At what distance from the source will the intensity of the wave be 0.177 W/m2?
d) and what will be the absorption pressure exerted by the wave at that distance?
e) and what will be the effective electric field (rms) exerted by the wave at that distance?
The intensity of an electromagnetic wave transmitted by a radio station at a certain distance is given. By using the inverse square law. a) [tex]I=0.0394 W/m^2[/tex] b)wavelength = 3.17 meters c) r = 3786 m d)absorption pressure = [tex]5.9*10^-^1^0 N/m^2 e[/tex]) electric field = [tex]5.57*10^-^4[/tex] V/m
a) For finding the intensity three times the distance from the radio station, the inverse square law is used. Since the intensity decreases with the square of the distance, the new intensity will be [tex](1/3)^2[/tex] times the original intensity. Thus, the intensity will be (1/9) times the original intensity, which is
[tex]I=0.355/9=0.0394 W/m^2[/tex].
b) The wavelength of the transmitted signal can be calculated using the formula:
wavelength = speed of light/frequency
Given that the frequency is[tex]94.6 MHz (94.6*10^6 Hz)[/tex], and the speed of light is approximately [tex]3*10^8[/tex] m/s,
substitute these values into the formula to find the wavelength: wavelength = [tex](3*10^8 m/s) / (94.6*10^6Hz) = 3.17 meters[/tex].
c) Rearranging the formula for intensity,
I = power / [tex](4\pi r^2)[/tex], solve for the distance (r) where the intensity is 0.177 W/m².
Substituting the given intensity and power [tex](8 MW = 8*10^6 W)[/tex],
[tex]0.177 = (8*10^6 W) / (4\pi r^2)[/tex]
Solving for r:
r = [tex]\sqrt[/tex][tex][(8*10^6 W) / (4\pi *0.177 W/m^2)] \approx 3786 meters[/tex].
d) The absorption pressure exerted by the wave at that distance can be calculated using the formula:
absorption pressure = intensity/speed of light.
Substituting the given intensity and the speed of light,
absorption pressure = [tex]0.177 W/m^2 / (3*10^8 m/s) \approx 5.9*10^-^1^0 N/m^2[/tex].
e) The effective electric field (rms) exerted by the wave at that distance can be calculated using the formula:
effective electric field = [tex]\sqrt[/tex](2 × intensity/permeability of free space × speed of light).
Substituting the given intensity, the permeability of free space ([tex]\mu_0 = 4\pi*10^-^7 T.m/A[/tex]), and the speed of light,
effective electric field = [tex]\sqrt(2 * 0.177 W/m^2 / (4\pi*10^-^7 T.m/A * 3*10^8 m/s)) \approx 5.57*10^-^4 V/m[/tex].
Learn more about electromagnetic wave here:
https://brainly.com/question/29774932
#SPJ11
The counter-clockwise circulating current in a solenoid is increasing at a rate of 4.54 A/s. The cross-sectional area of the solenoid is 3.14159 cm², and there are 395 tums on its 21.4 cm length. What is the magnitude of the self-induced emf & produced by the increasing current? Answer in units of mV. Answer in units of mV part 2 of 2 Choose the correct statement 11 The & attempts to move the current in the solenoid in the clockwise direction x 2 The E tries to keep the current in the solenoid flowing in the counter-clockwise direction 03 The does not effect the current in the solenoid 4 Not enough information is given to determine the effect of the E By the right hand rule, the E produces mag- 5. netic fields in a direction perpendicular to the prevailing magnetic field
The emf tries to keep the current in the solenoid flowing in the counter-clockwise direction. When something moves in the opposite direction to the way in which the hands of a clock move round in known as counterclockwise.
To calculate the magnitude of the self-induced electromotive force (emf) produced by the increasing current in the solenoid, we can use Faraday's law of electromagnetic induction, which states that the emf induced in a coil is equal to the rate of change of magnetic flux through the coil.
The formula to calculate the emf is:
emf = -N * dΦ/dt
where N is the number of turns in the solenoid and dΦ/dt is the rate of change of magnetic flux.
Rate of change of current (di/dt) = 4.54 A/s (since current is increasing at this rate)
Cross-sectional area (A) = 3.14159 cm² = 0.000314159 m²
Length of the solenoid (l) = 21.4 cm = 0.214 m
Number of turns (N) = 395
First, we need to calculate the magnetic flux (Φ) through the solenoid.
The magnetic flux is given by the formula:
Φ = B * A
where B is the magnetic field and A is the cross-sectional area.
To calculate the magnetic field, we use the formula:
B = μ₀ * (N / l) * I
where μ₀ is the permeability of free space, N is the number of turns, l is the length of the solenoid, and I is the current.
Permeability of free space (μ₀) = 4π × 10⁻⁷ T·m/A
Calculations:
B = (4π × 10⁻⁷ T·m/A) * (395 / 0.214 m) * (4.54 A/s)
B ≈ 0.0332 T
Now, we can calculate the rate of change of magnetic flux (dΦ/dt):
dΦ/dt = B * A * (di/dt)
dΦ/dt = 0.0332 T * 0.000314159 m² * (4.54 A/s)
dΦ/dt ≈ 4.20 × 10⁻⁶ Wb/s
Finally, we can calculate the magnitude of the self-induced emf:
emf = -N * dΦ/dt
emf = -395 * (4.20 × 10⁻⁶ Wb/s)
emf ≈ -1.66 mV
The magnitude of the self-induced emf produced by the increasing current is approximately 1.66 mV.
Regarding the second part of your question, according to the right-hand rule, the self-induced emf tries to keep the current in the solenoid flowing in the same direction, which in this case is the counter-clockwise direction. So, the correct statement is: The emf tries to keep the current in the solenoid flowing in the counter-clockwise direction.
To knwo more baout electromotive force (emf)
https://brainly.com/question/31833293
#SPJ11
When your instructor came to your house, she was approaching straight at you on a very fast-moving car and was frantically making a monotone sound with a pipe with one open end and one closed end, whose length was 0.67 m. According to her text message, she was making the 7th harmonic. But to you, it sounded like the sound was in its 9th harmonic. How fast was she moving? Use 343 m/s for the speed of sound. O 76 m/s 0 440 m/s 270 m/s 098 m/s
The instructor was moving at a speed of approximately 76 m/s.
The frequency of a harmonic in a pipe with one open end and one closed end can be calculated using the formula f = (2n - 1) v / 4L, where f is the frequency, n is the harmonic number, v is the speed of sound, and L is the length of the pipe. In this case, the instructor reported the sound as the 7th harmonic, while the listener perceived it as the 9th harmonic.
Let's set up two equations based on the given information. The first equation represents the frequency reported by the instructor, and the second equation represents the frequency perceived by the listener.
For the instructor: f₁ = (2 × 7 - 1) v / 4L
For the listener: f₂ = (2 × 9 - 1) v / 4L
By dividing the second equation by the first equation, we can eliminate the variables v and L:
f₂ / f₁ = [(2 × 9 - 1) / (2 × 7 - 1)]
Simplifying the equation, we find:
f₂ / f₁ = 17 / 13
Since the speed of sound (v) is given as 343 m/s, we can solve for the ratio of frequencies and find:
f₂ / f₁ = v₂ / v₁ = 17 / 13
Therefore, the ratio of the velocities is:
v₂ / v₁ = 17 / 13
Now we can plug in the given value of v₁ = 343 m/s and solve for v₂:
v₂ = (v₁ × 17) / 13
v₂ = (343 × 17) / 13 ≈ 76 m/s
Hence, the instructor was moving at a speed of approximately 76 m/s.
Learn more about speed here:
https://brainly.com/question/32673092
#SPJ11
A vibrating tuning fork of frequency 730 Hz is held above a tube filled with water. Assume that the speed of sound is 340 m/s. As the water level is lowered, consecutive maxima in intensity are observed at intervals of about A) 107.4 cm B) 46.6 cm C) 11.6 cm D214.7 cm EU 23.3 cm
The interval between consecutive maxima in intensity is approximately 46.58 cm i.e., the correct answer is B) 46.6 cm.
To determine the interval between consecutive maxima in intensity, we can use the formula:
λ = v/f
where λ is the wavelength, v is the speed of sound, and f is the frequency.
Given that the frequency of the tuning fork is 730 Hz and the speed of sound is 340 m/s, we can calculate the wavelength:
λ = 340 m/s / 730 Hz ≈ 0.4658 m
Now, we need to convert the wavelength to centimeters to match the options provided.
There are 100 centimeters in a meter, so:
0.4658 m × 100 cm/m ≈ 46.58 cm
Therefore, the interval between consecutive maxima in intensity is approximately 46.58 cm.
Among the options provided, the closest one to 46.58 cm is option B) 46.6 cm.
So, the correct answer is B) 46.6 cm.
Learn more about wavelength here:
https://brainly.com/question/30481673
#SPJ11
A string with a linear density of 7.11 × 10 ^- 4 k g / m and a length of 1.14m is stretched across the open end of a closed tube that is 1.39m long. The diameter of the tube is very small. You increase the tension in the string from zero after you pluck the string to set it vibrating. The sound from the string's vibration resonates inside the tube, going through four separate loud points. What is the tension in the string when you reach the fourth loud point? Assume the speed of sound in air is 343m/s.
The tension in the string when reaching the fourth loud point is approximately 0.725 Newtons. The fundamental frequency is 61.97 Hz. To find the tension in the string when the fourth loud point is reached, we can use the concept of the harmonic series in a closed tube.
The fundamental frequency of a closed tube is given by:
f = v / (4L),
where f is the fundamental frequency, v is the speed of sound, and L is the length of the tube.
In this case, the length of the tube is given as 1.39 m, so we can calculate the fundamental frequency:
f = 343 m/s / (4 * 1.39 m)
≈ 61.97 Hz
The fundamental frequency corresponds to the first loud point. Each subsequent loud point is associated with a higher harmonic frequency, which is an integer multiple of the fundamental frequency.
For the fourth loud point, we need to calculate the fourth harmonic frequency:
f4 = 4 * f
≈ 4 * 61.97 Hz
≈ 247.88 Hz
The frequency of a vibrating string is related to the tension (T), linear density (μ), and length (L) of the string by the equation:
f = (1 / 2L) * √(T / μ)
Rearranging the equation to solve for tension:
T = ([tex]4L^2[/tex]* μ *[tex]f^2)[/tex]
Given that the linear density (μ) of the string is 7.11 × [tex]10^(-4)[/tex] kg/m, the length (L) of the string is 1.14 m, and the frequency (f) is 247.88 Hz (fourth harmonic frequency), we can calculate the tension (T):
T = (4 * ([tex]1.14 m)^2 * 7.11 * 10^(-4)[/tex]kg/m * (247.88 [tex]Hz)^2)[/tex]
≈ 0.725 N
Therefore, the tension in the string when reaching the fourth loud point is approximately 0.725 Newtons.
Learn more about tension here:
https://brainly.com/question/30037765
SPJ11
A 1000 kg motor vehicle starts from an initial velocity 1 m/s and after traveling at a distance of 113 m on a straight-line path, its speed is found to be 28 m/s. What is the magnitude of the average net acceleration of the car during the travel on this straight-line path? No need to write the unit. Please write the answer in one decimal place. (eg 1.234 should be written as 1.2).
Answer:
The acceleration is 3.5.
Explanation:
According to the question, the initial velocity is given as 1 m/s, the distance travelled is given as 113 m and the final velocity is given as 28 m/s.
Observe equation 1, [tex]v^{2} = u^{2} +2a s[/tex] where v is the final velocity, u is the initial velocity, a is the acceleration and s is the distance. Rearranging for acceleration gives
[tex]a = \frac{v^{2} -u^{2} }{2s}[/tex]
Thus, [tex]a = \frac{28^{2}-1^{2} }{226}[/tex]
Therefore, acceleration is 3.4646 which is 3.5 to 1 decimal place.
Three resistors of 12.0, 18.0, and 14.3 2 are connected in series. A 10.0V battery is connected to the combination. What is the current flowing through the 12.0 S resistor? Please enter a numerical answer below. Accepted formats are numbers or "e" based scientific notation e.g. 0.23, -2, 1e6, 5.23e-8
The current flowing through the 12.0 Ω resistor is 0.225 A (or 2.25e-1 A).Answer: 0.225
Given information: Three resistors of 12.0, 18.0, and 14.3 2 are connected in series. A 10.0V battery is connected to the combination.We can use Ohm's law to find the current flowing through the 12.0 Ω resistor. Ohm's law: V = IRwhereV is the potential difference (voltage)I is the current R is the resistance The current is the same for all the resistors because they are connected in series.
Electric charge flowing across a circuit is referred to as current. It measures how quickly electric charges, most often electrons, flow through a conductor. The letter "I" stands for current, which is denoted by the unit amperes (A). In a closed loop circuit, current travels through the conductor and back to the negative terminal of a power source, such as a battery. An electric potential difference, or voltage, across the circuit, is what drives the flow of current.
Therefore, we can use the total resistance and the total potential difference to find the current.I = V/RtwhereV is the potential differenceRt is the total resistanceTotal resistance:Rt = R₁ + R₂ + R₃whereR₁ = 12.0 ΩR₂ = 18.0 ΩR₃ = 14.3 ΩRt = 12.0 Ω + 18.0 Ω + 14.3 ΩRt = 44.3 Ω
Now, we can find the current using the total resistance and the potential difference.I = V/RtwhereV = 10.0 VI = 10.0 V/44.3 ΩI = 0.225 A
The current flowing through the 12.0 Ω resistor is 0.225 A (or 2.25e-1 A).Answer: 0.225
Learn more about current here:
https://brainly.com/question/31256947
#SPJ11
A long straight wire has a current of 18.0 A flowing upwards. An electron is traveling parallel to the wire, in the same direction as the current, and at a speed of 125,000 m/s. If the electron is 15.0 cm from the wire, what is the magnitude and direction of the magnetic force on the moving electron?
Hence, the magnitude of the magnetic force acting on the electron is 5.12 × 10^-14 N and its direction is in the right-hand direction.
When a current-carrying wire is placed in a magnetic field, it experiences a force. The right-hand rule for magnetic force can be used to determine the direction of the force. When a current-carrying wire is placed in a magnetic field, it experiences a force. The right-hand rule for magnetic force can be used to determine the direction of the force. The direction of the force is perpendicular to both the magnetic field and the current in the wire.
Given:
The current in the wire is 18.0 A flowing upwards.
The electron is traveling parallel to the wire, in the same direction as the current, and at a speed of 125,000 m/s.
The electron is 15.0 cm from the wire.
Force experienced by the electron moving with velocity v and charge q in a magnetic field B is given by the formula:F = q(v×B)
Here, q = -1.6 × 10^-19 C, v = 125,000 m/s, and B is given by B = μ₀I/2πr
μ₀ = 4π×10^-7 Tm/A
The magnitude of magnetic force on the electron is given as:F = (1.6 × 10^-19 C) × (125,000 m/s) × [4π×10^-7 Tm/A × 18.0 A/(2π × 0.15 m)]
F = 5.12 × 10^-14 N
As the direction of the current in the wire is upwards and the electron is traveling parallel to the wire, in the same direction as the current, so the direction of the magnetic force on the electron will be in the right-hand direction.
Hence, the magnitude of the magnetic force acting on the electron is 5.12 × 10^-14 N and its direction is in the right-hand direction.
To know more about magnetic field visit:
https://brainly.com/question/31743819
#SPJ11
A glass sheet 1.30 μm thick is suspended in air. In reflected light, there are gaps in the visible spectrum at 547 nm and 615.00 nm. Calculate the minimum value of the index of refraction of the glass sheet that produces this effect.
The case of light reflected from the upper surface of the film, we found that the minimum value of the refractive index of the glass sheet that produces the gaps in the visible spectrum at 547 nm and 615.00 nm is 1.466. Therefore, we can conclude that this is the answer.
Given data:Thickness of glass sheet (t) = 1.30 μmGaps in the visible spectrum at 547 nm and 615.00 nmWe know that when light is reflected from a thin film, we see colored fringes due to interference of light waves.
The conditions for minimum reflection from a thin film are:When the thickness of the film is odd multiples of λ/4 i.e. t = (2n+1)(λ/4)when there is no phase change at the reflection i.e. when the reflected wave is in phase with the incoming wave.
Assuming the light is reflecting from the upper surface of the film, we can find the refractive index (n) of the glass sheet using the formula: t = [(2n + 1) λ1]/4where λ1 is the wavelength of light in air.The gaps are seen at λ = 547 nm and λ = 615 nm
Therefore, applying above formulae for both wavelengths and taking the difference of the refractive indices: t = [(2n + 1) λ1]/4When λ = 547 nm ⇒ λ1 = λ/n = 547/nTherefore, t = [(2n + 1) λ]/4⇒ 1.3 × 10⁻⁶ = [(2n + 1) × 547 × 10⁻⁹]/4⇒ 2n + 1 = 4 × 1.3/547 ⇒ 2n + 1 = 0.0095n = 2⇒ Refractive index (n) = λ/λ1 = 547/λ1t = [(2n + 1) λ1]/4When λ = 615 nm ⇒ λ1 = λ/n = 615/n
Therefore, t = [(2n + 1) λ]/4⇒ 1.3 × 10⁻⁶ = [(2n + 1) × 615 × 10⁻⁹]/4⇒ 2n + 1 = 4 × 1.3/615 ⇒ 2n + 1 = 0.0085n = 2⇒ Refractive index (n) = λ/λ1 = 615/nDifference in refractive indices (Δn) = n(λ=547) - n(λ=615)= 547/n - 615/n = 547/2 - 615/2= -34To produce the effect of minimum reflection, the minimum value of the refractive index of the glass sheet is 1.5 - 0.034 = 1.466.
For the case of light reflected from the upper surface of the film, we found that the minimum value of the refractive index of the glass sheet that produces the gaps in the visible spectrum at 547 nm and 615.00 nm is 1.466. Therefore, we can conclude that this is the answer.
Learn more about Spectrum here,
https://brainly.com/question/19042165
#SPJ11
Four identical railway trucks, each of mass m, were coupled together and are at rest on a smooth horizontal track. A fifth truck of mass m and moving at 5.00 m/s collides and couples with the stationary trucks. What is the speed of the trucks after the impact?
The velocity of the trucks after the collision is 5/9 m/s.
The given problem involves an elastic collision between a moving body and a stationary one. After the impact, the two bodies stick together. We have to find out the speed of the trucks after the impact.Four identical railway trucks, each of mass m, were coupled together and are at rest on a smooth horizontal track. A fifth truck of mass m and moving at 5.00 m/s collides and couples with the stationary trucks.
What is the speed of the trucks after the impact?The initial momentum of the moving truck is m * 5.00 = 5m.The initial momentum of the stationary trucks is 0. The total momentum before the impact is 5m.After the collision, the trucks move together as one system. Let us assume that the final velocity of the combined system is v. Since the trucks are identical, the center of mass of the system is at the center of the 5-truck system. Let us apply the law of conservation of momentum for the combined system.5m = (5m + 4m)v9m v = 5mv = 5/9 m/sTherefore, the velocity of the trucks after the collision is 5/9 m/s.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
Write the Lagrange's equation of lagrangian L(x, x, y,ỹ, t) and the constraint force f(x, y). Is the total energy conserved?, explain why. astogint force
The Lagrange's equation for a system described by a Lagrangian function L(x, ẋ, y, ỹ, t) is given by d/dt (∂L/∂ẋ) - (∂L/∂x) = f(x, y), where x and y are the generalized coordinates, ẋ and ỹ are their respective velocities, t is time, and f(x, y) represents the constraint force. The total energy of the system is conserved if the Lagrangian is not explicitly dependent on time (i.e., ∂L/∂t = 0).
Lagrange's equation is a fundamental principle in classical mechanics that describes the dynamics of a system in terms of its Lagrangian function. It states that the time derivative of the momentum (∂L/∂ẋ) minus the derivative of the Lagrangian with respect to the generalized coordinate (x) is equal to the external forces acting on the system, represented by the constraint force f(x, y).
Regarding the conservation of total energy, it depends on the properties of the Lagrangian. If the Lagrangian does not explicitly depend on time (i.e., ∂L/∂t = 0), then the total energy of the system, which is the sum of the kinetic and potential energies, is conserved. This is a consequence of Noether's theorem, which states that if a Lagrangian has a continuous symmetry, such as time translation symmetry, there is a conserved quantity associated with it.
However, if the Lagrangian explicitly depends on time, the total energy may not be conserved, and energy can be transferred into or out of the system. In such cases, the Lagrangian represents a system with time-dependent external forces or dissipative effects.
In summary, the Lagrange's equation describes the dynamics of a system using the Lagrangian function and constraint forces. The conservation of total energy depends on whether the Lagrangian is explicitly dependent on time or not. If it is not, the total energy is conserved; otherwise, energy may be transferred in or out of the system.
Learn more about Lagrangian here:
https://brainly.com/question/14309211
#SPJ11
A tank was initially filled with 100 gal of salt solution containing 1 lb of salt per gallon. Fresh brine containing 2 lbs of salt/gal runs into the tank at a rate of 5 gal/min, and the mixture, assumed uniform, runs out at the same rate. At what time will the concentration of the salt in the tank become? Select one: O a. 55 min O b. 28 min O c. 32 min O d. 14 min
The concentration of salt in the tank will become 2 lbs/gal after 14 minutes. Hence, the correct option is (d) 14 min.
The initial volume of the tank = 100 galInitial salt concentration = 1 lb/gal.Salt solution = 100 × 1 = 100 lbs.Initially, we have a total of 100 lbs of salt in the tank.Let us assume that after t minutes, the concentration of salt in the tank will become x.Now, we need to write a differential equation for this mixture. The amount of salt in the mixture is equal to the amount of salt that flows in minus the amount of salt that flows out.dA/dt = (C1 × V1 - C2 × V2) /V.
Where, A = amount of salt in the mixture.C1 = initial salt concentration = 1 lb/gal.C2 = salt concentration in incoming brine = 2 lb/gal.V1 = volume of salt solution in the tank at any time = (100 + 5t) galV2 = volume of incoming brine = 5 galV = volume of the mixture at any time = (100 + 5t) gal.dA/dt = (1 × (100 + 5t) - 2 × 5)/ (100 + 5t) ... (1)On simplifying the above equation, we getdA/dt = (100 - 5t)/ (100 + 5t) ... (2)Separating variables and integrating, we get∫ (100 + 5t) / (100 - 5t) dt = ∫ dA / A∫ (100 + 5t) / (100 - 5t) dt = ln |A| + C... (3)On integrating (3), we get-10 ln |100 - 5t| = ln |A| + C (solving for constant).
Therefore,-10 ln |100 - 5t| = ln |100| + C... (4)When t = 0, the salt concentration is 1 lb/gal. So,100 lbs of salt and 100 gallons of solution are there in the tank.Therefore,100 = V × 1 => V = 100 gallonsSubstitute this in equation (4).-10 ln |100 - 5t| = ln |100| + ln |A| (simplifying C = ln |A|)ln |100 - 5t|^(-10) = ln (100 × |A|)... (5)ln |100 - 5t| = -ln (100 × |A|)^(1/10)ln |100 - 5t| = -ln (|A|)^(1/10) × ln (100)^(1/10)ln |100 - 5t| = -0.5 ln |A| ... (6)Let the salt concentration becomes 2 lb/gal after time t.So, we need to find the value of t such that x = 2 lb/gal.
The amount of salt in the mixture at any time A = V × xA = (100 + 5t) × 2A = 200 + 10tOn substituting A = 200 + 10t and x = 2 in equation (6), we getln |100 - 5t| = -0.5 ln (200 + 10t)... (7)Solving for t in equation (7)100 - 5t = (200 + 10t)^(-0.5)100 - 5t = (2 + t)^(-1)100 - 5t = 1 / (2 + t)t = 14 minutes (approx)Therefore, the concentration of salt in the tank will become 2 lbs/gal after 14 minutes. Hence, the correct option is (d) 14 min.
Learn more about equation here,
https://brainly.com/question/29174899
#SPJ11
A microscope has a circular lens with focal length 31.6 mm and diameter 1.63 cm. What is the smallest feature in micrometers (µm) that can be resolved with the microscope when specimens are observed with light of wavelength 665 nm? (State answer with 2 digits right of decimal. Do not include unit in answer.)
A microscope has a circular lens with focal length 31.6 mm and diameter 1.63 cm. the smallest feature that can be resolved by the microscope is approximately 3.13 µm.
The smallest feature that can be resolved by a microscope is determined by the concept of angular resolution, which is dependent on the wavelength of light and the numerical aperture of the lens system. The formula for the angular resolution is given by:
Angular resolution = 1.22 * (Wavelength / Numerical aperture)
The numerical aperture (NA) is a characteristic of the microscope lens system and can be calculated as the ratio of the lens diameter to twice the focal length:
Numerical aperture = Lens diameter / (2 * Focal length)
Given the values in the problem, the diameter of the lens is 1.63 cm and the focal length is 31.6 mm (or 3.16 cm). Plugging these values into the numerical aperture formula, we get:
Numerical aperture = 1.63 cm / (2 * 3.16 cm) ≈ 0.258
Now, we can calculate the angular resolution using the given wavelength of light (665 nm or 0.665 µm) and the numerical aperture:
Angular resolution = 1.22 * (0.665 µm / 0.258) ≈ 3.13 µm
Therefore, the smallest feature that can be resolved by the microscope is approximately 3.13 µm.
Learn more about angular resolution here:
https://brainly.com/question/30657782
#SPJ11
Only an experiment can show:
OA. how people act in a natural environment.
OB. how children develop over time.
C. how one thing causes another.
OD. what a large number of people believe.
SUBMIT
Among the given options, the statement "Only an experiment can show option C. how one thing causes another" is the most accurate.
Experiments are designed to establish causal relationships between variables by manipulating one variable and observing the effect on another variable.
Here's why experiments are essential for understanding causality:
Control over variables: Experiments allow researchers to control and manipulate variables to isolate the causal relationship of interest. By systematically varying one factor while keeping others constant, researchers can assess the effect of the manipulated variable on the outcome.
know more about experiment here:
https://brainly.com/question/32058774
#SPJ8
Calculate Earth's mass given the acceleration due to gravity at the North Pole is measured to be 9.832 m/s2 and the radius of the Earth at the pole is 6356 km. Answer 7. Calculate the acceleration due to gravity on the surface of the Sun. Ans 8. A neutron star is a collapsed star with nuclear density. A particular neutron star has a mass twice that of our Sun with a radius of 12.0 km. What would be the weight of a 100−kg astronaut on standing on its surface?
Earth's mass is 5.98 x 10^24 kg.2.Answer 7. The acceleration due to gravity on the surface of the Sun is 274 m/s². Answer 8. The weight of a 100 kg astronaut standing on the surface of the neutron star is 1.32 x 10^14 N.
1. Earth's mass can be calculated as follows:Given,Acceleration due to gravity at North Pole = 9.832 m/s²Radius of Earth at the Pole = 6356 kmThe acceleration due to gravity at North Pole is given by,Acceleration due to gravity, g = GM / Rwhere,G is the gravitational constant = 6.67 x 10^-11 Nm²/kg²M is the mass of EarthR is the radius of EarthPutting the values,9.832 = (6.67 x 10^-11)M / (6,356,000)Therefore,M = (9.832 x 6,356,000²) / (6.67 x 10^-11) = 5.98 x 10^24 kgHence, Earth's mass is 5.98 x 10^24 kg.2.
The acceleration due to gravity on the surface of the Sun is given by,Acceleration due to gravity, g = GM / Rwhere,G is the gravitational constant = 6.67 x 10^-11 Nm²/kg²M is the mass of Sun = 1.989 x 10^30 kgR is the radius of Sun = 6.96 x 10^8 mPutting the values, g = [(6.67 x 10^-11) x (1.989 x 10^30)] / (6.96 x 10^8)²Therefore, g = 274 m/s²3.
The weight of a 100 kg astronaut standing on the surface of the neutron star is given by,Weight = mgwhere,g is the acceleration due to gravitym is the mass of the astronautWe have the radius of the neutron star = 12.0 km = 12.0 x 10^3 mg = (G(M / R²)) x mwhere,G is the gravitational constant = 6.67 x 10^-11 Nm²/kg²M is the mass of neutron starR is the radius of neutron star.
Putting the values,g = (6.67 x 10^-11) x [(2 x 1.989 x 10^30) / (12.0 x 10^3)²]g = 1.32 x 10^12 m/s²Therefore, Weight = mg = 100 x 1.32 x 10^12 = 1.32 x 10^14 NAns: Earth's mass is 5.98 x 10^24 kg. The acceleration due to gravity on the surface of the Sun is 274 m/s². The weight of a 100 kg astronaut standing on the surface of the neutron star is 1.32 x 10^14 N.
Learn more about Neutron star here,
https://brainly.com/question/30114728
#SPJ11
What do you need to find the intensity of an electromagnetic wave?
Both the electric and magnetic field strengths.
Either the electric or magnetic field strength.
Only the electric field strength.
Only the magnetic field strength.
To find the intensity of an electromagnetic wave, we need to know the electric and magnetic field strengths as they are interdependent. The correct option is 1) Both the electric and magnetic field strengths.
The intensity of an electromagnetic wave is given by the energy transferred per unit area per unit time and is proportional to the square of the electric and magnetic field strengths. Therefore, if either the electric or magnetic field strength is missing, it will be impossible to determine the intensity accurately. The electric and magnetic fields oscillate perpendicular to each other and the direction of propagation of the wave. They have the same amplitude, frequency, and wavelength, but they differ in phase.
The intensity of an electromagnetic wave can also be determined by measuring the average power per unit area over a period. In summary, both electric and magnetic field strengths are required to calculate the intensity of an electromagnetic wave accurately. It is important to note that these fields are interdependent on each other, and a change in one can affect the other. Therefore, accurate measurements are crucial in the determination of the intensity of electromagnetic waves.
Learn more about electromagnetic wave here:
https://brainly.com/question/29774932
#SPJ11
A 2100 kg truck is travelling at 31m/s [E] and collides with a 1500 kg car travelling 24m/s[E]. The two vehicles lock bumpers and continue as one object. What is the decrease in kinetic energy during the inelastic collision?
A 2100 kg truck is moving at 31m/s[E] and crashes into a 1500 kg car traveling at 24m/s[E]. The two cars lock bumpers and continue as one object. The decrease in kinetic energy during the inelastic collision is 870194 J. The law of conservation of momentum is used to determine the final velocity of the combined vehicles.
An inelastic collision is one in which the kinetic energy is not conserved. Instead of bouncing off each other, the two colliding objects stick together after the collision. The decrease in kinetic energy during an inelastic collision is related to the amount of energy that is transformed into other forms such as sound, heat, or deformation energy. During the inelastic collision between a 2100 kg truck and a 1500 kg car, the two vehicles lock bumpers and continue as one object. First, it is necessary to calculate the total initial kinetic energy before the collision occurs. Kinetic energy = 0.5 x mass x velocity²The kinetic energy of the truck before the collision = 0.5 x 2100 kg x (31 m/s)² = 1013395 J. The kinetic energy of the car before the collision = 0.5 x 1500 kg x (24 m/s)² = 864000 JThe total initial kinetic energy = 1013395 J + 864000 J = 1877395 JThe total mass of the two vehicles after the collision = 2100 kg + 1500 kg = 3600 kg. Now, we can calculate the final velocity of the combined vehicles after the collision using the law of conservation of momentum: Momentum before collision = Momentum after collision2100 kg x 31 m/s + 1500 kg x 24 m/s = 3600 kg x vfVf = (2100 kg x 31 m/s + 1500 kg x 24 m/s) / 3600 kgVf = 26.08 m/sThe kinetic energy of the combined vehicles after the collision = 0.5 x 3600 kg x (26.08 m/s)² = 1007201 J. Therefore, the decrease in kinetic energy during the inelastic collision is 1877395 J - 1007201 J = 870194 J.For more questions on kinetic energy
https://brainly.com/question/8101588
#SPJ8
Show all of your work in the space provided.(If needed you can use extra paper).Show all of your work, or you will not get any credit. 1. Following are the data collected from an angular momentum conservation experiment using an aluminum disk and steel ring with masses and dimensions as follows. Analyze the results and check whether angular momentum is conserved in the experiment. Obtain the - \% difference L 1
ω 1
and L 2
ω 2
.(20 points) ४ Mass of Aluminum Dise (m in Kg)=0.106Kg * Radius of Aluminum Disc (r in m)=0.0445 m 4 Mass of Steel ring (M in Kg)=0.267 Kg, Inner Radius of Steel Disc (r 1
in m)= 0.0143m, Outer Radius of Steel Disc (r 2
inm)=0.0445m Moment of Inertia of disk is given by I= 2
1
mr 2
Moment of Inertia of ring is given by I s
= 2
1
M(r 1
2
+r 2
2
) Angular momentum I 2.Calculate the equivalent resistances of the following four circuits, compare the values with the experimental values in the table and calculate the \% difference between experimental and theoretical values. Series Circut: R eq
=R 1
+R 2
+R 3
+⋯ Parallel Circut: R eq
1
= R 1
1
+ R 2
1
+ R 3
1
+⋯
The aluminum disk will reach the bottom of the incline first.
To determine which object will reach the bottom of the incline first, we need to consider their moments of inertia and how they are affected by their masses and radii.
The moment of inertia (I) is a measure of an object's resistance to changes in its rotational motion. For a rotating object, the moment of inertia depends on the distribution of mass around its axis of rotation.
The moment of inertia for a solid disk is given by the formula:
[tex]I_{disk} = (1/2) * m_{disk} * r_{disk^2}[/tex]
where[tex]m_{disk }[/tex]is the mass of the aluminum disk and [tex]r_{disk}[/tex] is the radius of the aluminum disk.
The moment of inertia for a ring is given by the formula:
[tex]I_{ring} = m_{ring} * (r_{ring^2})[/tex]
where[tex]m_{ring}[/tex] is the mass of the steel ring and [tex]r_{ring }[/tex]is the radius of the steel ring.
Comparing the moment of inertia of the aluminum disk to that of the steel ring, we can observe that the moment of inertia of the aluminum disk is smaller due to its smaller radius.
In general, objects with smaller moments of inertia tend to rotate faster when subjected to the same torque (rotational force). Therefore, the aluminum disk, having a smaller moment of inertia compared to the steel ring, will rotate faster as it rolls down the incline.
To know more about moments of inertia, here
brainly.com/question/33002666
#SPJ4
--The complete Question is, Following are the data collected from an angular momentum conservation experiment using an aluminum disk and steel ring with masses and dimensions as follows:
Mass of the aluminum disk: 0.5 kg
Mass of the steel ring: 0.3 kg
Radius of the aluminum disk: 0.2 meters
Radius of the steel ring: 0.1 meters
Initial angular velocity of the aluminum disk: 5 rad/s
Question: When the aluminum disk and steel ring are released from rest and allowed to roll down an incline simultaneously, which object will reach the bottom of the incline first? --
An electron (mass 9 x 10⁻³¹ kg) is traveling at a speed of 0.91c in an electron accelerator. An electric force of 1.6 x 10 N is applied in the direction of motion while the electron travels a distance of 2 m. You need to find the new speed of the electron. Which of the following steps must be included in your solution to this problem? (a) Calculate the initial particle energy Yimc of the electron. (b) Calculate the final particle energy y&mc? of the electron. (c) Determine how much time it takes to move this distance. (d) Use the expression m[512 to find the kinetic energy of the electron. (e) Calculate the net work done on the electron. (f) Use the final energy of the electron to find its final speed. What is the new speed of the electron as a fraction of c?
The new speed of the electron as a fraction of c is 0.9655.
Mass of electron = m = 9 x 10⁻³¹ kg
Speed of electron = u = 0.91c
Electric force = F = 1.6 x 10 N
Crossing distance = s = 2 m
Electric force = F = ma
where, F = Electric force, m = Mass of the electron, a = Acceleration of the electron.
Using above equation, we get, a = F/ma = F/m = 1.6 x 10 / 9 x 10⁻³¹ a = 1.78 x 10⁴ m/s²
Now, we can calculate the time taken by electron to travel a distance of 2m using s = ut + ½ at²
where, u = Initial speed of electron, t = Time taken by electron to travel distance s, a = Acceleration of electron, s = Distance travelled by electron.
So, t = s / (u/2 + ½ a)
We get, t = 2 / [0.91c/2 + 1/2 * 1.78 x 10⁴]
= 5.71 x 10⁻¹⁰ s
Kinetic energy = [m / √(1- (v/c)²)] c² - mc²
where, Kinetic energy = Final kinetic energy of electron, m = Mass of the electron, v = Final speed of the electron.
So, K.E = [9 x 10⁻³¹ / √(1-(v/c)²)] c² - (9 x 10⁻³¹) c²
Now, calculate the net work done on the electron. Wnet = K.E - K.Eo
where, Wnet = Net work done on electron, K.E = Final kinetic energy of electron, K.Eo = Initial kinetic energy of electron.
K.Eo = [9 x 10⁻³¹ / √(1-(u/c)²)] c² - (9 x 10⁻³¹) c²
we get, Wnet = [9 x 10⁻³¹ / √(1-(v/c)²)] c² - [9 x 10⁻³¹ / √(1-(u/c)²)] c²
Simplify this expression, Wnet = 0.5 x 9 x 10⁻³¹ [(1/√(1-(v/c)²)] c² - [(1/√(1-(u/c)²)] c²
= 0.5 x m [(1/√(1-(v/c)²)] c² - [(1/√(1-(u/c)²)] c²
Finally, use the work-energy principle. We know that, Wnet = ΔK.E
Wnet = Work done on the particle, ΔK.E = Change in kinetic energy of the particle.
Since the electron is being accelerated, the force acting on it is in the same direction as the direction of motion and hence, the work done is positive. So, we can write Wnet = K.E - K.Eo.
Now, put the values of Wnet, ΔK.E, K.E and K.Eo, we get,0.5 x m [(1/√(1-(v/c)²)] c² - [(1/√(1-(u/c)²)] c²
= [(9 x 10⁻³¹ / √(1-(v/c)²)] c² - [(9 x 10⁻³¹ / √(1-(u/c)²)] c² - [(9 x 10⁻³¹ / √(1-(u/c)²)] c²
Now, we can calculate the final kinetic energy of the electron, Kinetic energy = (Wnet + K.Eo)K.E = 0.5 x m [(1/√(1-(v/c)²)] c² + [(9 x 10⁻³¹ / √(1-(u/c)²)] c²K.E
= [9 x 10⁻³¹ / √(1-(v/c)²)] c²v/c
= √[1 - ((m/m+1)(c/u²t²))]v/c
= √[1 - ((9 x 10⁻³¹/10⁻³¹ + 1)(3 x 10⁸/(0.91 x 3 x 10⁸)² x (5.71 x 10⁻¹⁰)²))]v/c = 0.9655
Therefore, the new speed of the electron as a fraction of c is 0.9655.
Learn more about new speed of electron: https://brainly.com/question/29573654
#SPJ11
A capacitor has a capacitance of 3.7 x 10-6 F. In the charging process, electrons are removed from one plate and placed on the other plate. When the potential difference between the plates is 610 V, how many electrons have been transferred?
Approximately 1.4106 x 10^16 electrons have been transferred during the charging process of the capacitor.
To find the number of electrons transferred during the charging process of a capacitor, we can use the equation:
Q = CV
Where:
Q is the charge transferred (in Coulombs),
C is the capacitance of the capacitor (in Farads),
V is the potential difference across the capacitor (in Volts).
Given:
C = 3.7 x 10^(-6) F
V = 610 V
Substituting these values into the equation, we have:
Q = (3.7 x 10^(-6) F)(610 V)
Q = 2.257 x 10^(-3) C
Now, we know that the charge of one electron is approximately 1.6 x 10^(-19) C. To find the number of electrons transferred, we can divide the total charge by the charge of one electron:
Number of electrons = Q / (1.6 x 10^(-19) C)
Number of electrons = (2.257 x 10^(-3) C) / (1.6 x 10^(-19) C)
Performing the calculation, we get:
Number of electrons = 1.4106 x 10^(16)
Therefore, approximately 1.4106 x 10^16 electrons have been transferred during the charging process of the capacitor.
Learn more about capacitor
https://brainly.com/question/31057014
#SPJ11
A parallel plate capacitor, in which the space between the plates is filled with a dielectric material with dielectric constant k = 10.1, has a capacitor of C= 6.2μF and it is connected to a battery whose voltage is V = 5.9V and fully charged. Once it is fully charged, it is disconnected from the battery and without affecting the charge on the plates, dielectric material is removed from the capacitor. How much change occurs in the energy of the capacitor (final energy minus initial energy)? Express your answer in units of mJ (mili joules) using two decimal places
The change in energy of the capacitor (final energy minus initial energy) is 2.11 mJ.
When the dielectric material is removed from the capacitor, the capacitance decreases, and the voltage across the plates increases to keep the charge constant. Let's calculate the initial energy stored in the capacitor as well as the final energy stored in the capacitor.Energy stored by a capacitor is given by:U = 1/2 CV²Initial energy,U1 = 1/2 × 6.2 × (5.9)² U1 = 102.43 mJWhen the dielectric material is removed from the capacitor, the capacitance changes.
Capacitance without the dielectric material,C2 = C / k C2 = 6.2 μF / 10.1 C2 = 0.613 μFThe voltage across the plates increases.V2 = V × k V2 = 5.9 V × 10.1 V2 = 59.59 VFinal energy,U2 = 1/2 × 0.613 × (59.59)² U2 = 104.54 mJChange in energy,ΔU = U2 - U1 ΔU = 104.54 - 102.43 ΔU = 2.11 mJTherefore, the change in energy of the capacitor (final energy minus initial energy) is 2.11 mJ.
Learn more about Energy here,
https://brainly.com/question/2003548
#SPJ11
marbles rolling down the ramp and horizontally off your desk consistently land 48.0 cm from the base of your desk. ypur desk is 84.0 cm high. if you pull your desk over to the window of your second story room and launch marbles to the ground (6.56 meters below the desk top), how far out into the yard will the marbles land?
The marbles will land approximately 0.479 meters, or 47.9 centimeters, out into the yard.
To determine how far the marbles will land in the yard, we can use the principle of projectile motion. Since the marble is launched horizontally, its initial vertical velocity is 0 m/s.
We can use the following kinematic equation to find the horizontal distance traveled by the marble:
d = v_x * t
where:
d is the horizontal distance traveled,
v_x is the horizontal velocity of the marble, and
t is the time of flight.
First, let's calculate the time of flight. We can use the equation for vertical displacement in free fall:
y = (1/2) * g * t^2
where:
y is the vertical displacement,
g is the acceleration due to gravity (approximately 9.8 m/s^2), and
t is the time of flight.
Given that the vertical displacement is 6.56 meters, we can rearrange the equation to solve for time:
t = sqrt(2y/g)
t = sqrt(2 * 6.56 / 9.8)
t ≈ 1.028 seconds
Now, let's calculate the horizontal velocity. Since there is no horizontal acceleration, the horizontal velocity remains constant throughout the motion. We can use the horizontal distance traveled on the desk (48.0 cm = 0.48 meters) and the time of flight to find the horizontal velocity:
d = v_x * t
0.48 = v_x * 1.028
v_x ≈ 0.466 m/s
Finally, we can calculate the horizontal distance the marble will travel to the ground (in the yard) using the horizontal velocity and the time of flight:
d = v_x * t
d = 0.466 * 1.028
d ≈ 0.479 meters
Therefore, the marbles will land approximately 0.479 meters, or 47.9 centimeters, out into the yard.
Learn more about vertical velocity
https://brainly.com/question/29026497
#SPJ11
Two m = 4.0 g point charges on 1.0-m-long threads repel each other after being charged to q = 110 nC , as shown in the figure. What is the angle θ ? You can assume that θ is a small angle.
The angle θ between the two charged point charges is approximately 89.97 degrees.
To find the angle θ between the two charged point charges, we can use the concept of electrostatic forces and trigonometry.
Given:
- Mass of each point charge: m = 4.0 g = 0.004 kg
- Length of the threads: l = 1.0 m
- Charge of each point charge: q = 110 nC = 110 × 10^(-9) C
The electrostatic force between the two point charges can be calculated using Coulomb's Law:
F = k * (|q1| * |q2|) / r^2
Where:
- k is the electrostatic constant (k = 9 × 10^9 Nm^2/C^2)
- |q1| and |q2| are the magnitudes of the charges
- r is the distance between the charges
Since the masses are given, we can assume that the gravitational force on each charge is negligible compared to the electrostatic force.
At equilibrium, the electrostatic force will be balanced by the tension in the threads. The tension in each thread is equal to the weight of the mass attached to it.
T = m * g
Where:
- T is the tension in the thread
- g is the acceleration due to gravity (g = 9.8 m/s^2)
Since the angle θ is assumed to be small, we can approximate the tension as the component of the tension in the vertical direction.
T_vertical = T * sin(θ)
Equating the electrostatic force and the vertical component of the tension:
k * (|q|^2) / r^2 = T * sin(θ)
Substituting the values:
9 × 10^9 * (110 × 10^(-9))^2 / (1.0)^2 = (0.004 kg * 9.8 m/s^2) * sin(θ)
Simplifying the equation:
99 = 0.0392 * sin(θ)
Now, we can solve for the angle θ:
sin(θ) = 99 / 0.0392
θ = arcsin(99 / 0.0392)
Using a calculator, we find:
θ ≈ 89.97 degrees
Therefore, the angle θ between the two charged point charges is approximately 89.97 degrees.
Learn more about Coulomb's Law
https://brainly.com/question/506926
#SPJ11
To find the angle θ between the two point charges, use the equation tan(θ) = (F×r)/(k×q²), where F is the force, r is the length of the thread, k is Coulomb's constant, and q is the charge.
Explanation:To find the angle between the two point charges, we can use trigonometry. The electrical force between the charges causes the wire to twist until the torsion balances the force. As the wire twists, the angle between the wire and the x-axis increases.
We can use the equation tan(θ) = (F×r)/(k×q²) to find the angle θ, where F is the force, r is the length of the thread, k is Coulomb's constant, and q is the charge. Plugging in the values from the problem, we can calculate the value of θ.
Learn more about angle between the two point charges here:https://brainly.com/question/33265676
#SPJ12
Solve for the angular frequency using your SHM equations for each of the systems described below:
a) Horizontal spring-mass system
b) Simple Pendulum
c) Physical Pendulum
a) The angular frequency for a horizontal spring-mass system is given by ω = √(k/m).
b) The angular frequency for a simple pendulum is given by ω = √(g/l).
c) The angular frequency for a physical pendulum is given by ω = √(mgh/I).
a) For a horizontal spring-mass system, the angular frequency is determined by the stiffness of the spring (k) and the mass (m) attached to it. The greater the spring constant or the smaller the mass, the higher the angular frequency.
b) For a simple pendulum, the angular frequency depends on the acceleration due to gravity (g) and the length of the pendulum (l). The longer the pendulum or the stronger the gravitational force, the lower the angular frequency.
c) In the case of a physical pendulum, the angular frequency is influenced by the mass of the pendulum (m), the acceleration due to gravity (g), the distance between the pivot point and the center of mass (h), and the moment of inertia (I) of the pendulum. Higher mass, larger distance, or larger moment of inertia result in lower angular frequency.
learn more about angular frequency here:
https://brainly.com/question/32670038
#SPJ4