A double-walled flask can be considered as two parallel planes with emisivities of 0.3 and 0.8, respectively. The reduction in heat transfer is 26.4 W/m².
The space between the walls of the flask is evacuated. When the inner and outer temperature is 300K and 260K, respectively, we need to determine the heat transfer per unit area using the Stefan-Boltzmann Law.
The heat transfer formula is given by Q=σ(ε1A1T1⁴−ε2A2T2⁴) Where Q is the heat transfer per unit area, σ is the Stefan-Boltzmann constant, ε1 and ε2 are the emisivities of the walls, A1 and A2 are the areas of the walls, and T1 and T2 are the temperatures of the walls.
Substituting the given values, we have
Q=5.67×10⁻⁸(0.3−0.8)×0.01×(300⁴−260⁴)
=75.2 W/m²
The reduction in heat transfer can be calculated when a shield of polished aluminum with ε = 0.05 is inserted between the walls.
We can use the formula Q′=σεeffA(T1⁴−T2⁴) to calculate the reduction in heat transfer. Here, εeff is the effective emisivity of the system and is given by:
1/εeff=1/ε1+1/ε2−1/ε3 where ε3 is the emisivity of the shield.
Substituting the values given in the problem, we get
1/εeff=1/0.3+1/0.8−1/0.05
=1.82εeff
=0.549
Thus, the reduction in heat transfer is given byQ′=σεeffA(T1⁴−T2⁴)=5.67×10⁻⁸×0.549×0.01×(300⁴−260⁴)=26.4 W/m²
Therefore, the reduction in heat transfer is 26.4 W/m².
A double-walled flask is an effective way to reduce heat transfer in a system. By using two parallel planes with different emisivities and evacuating the space between them, we can reduce the amount of heat transferred per unit area. When a polished aluminum shield with an emisivity of 0.05 is inserted between the walls, the reduction in heat transfer is significant. The reduction in heat transfer is calculated using the Stefan-Boltzmann Law and the formula for effective emisivity. In this problem, we found that the reduction in heat transfer is 26.4 W/m².
To know more about Stefan-Boltzmann Law visit:
brainly.com/question/30763196
#SPJ11
HELP ME PLS IM BEGGING
Given c = 10.5, m∠A = 30, and m∠B = 52, we can use the Law of Sines to find b. Rounded to the nearest tenth, b ≈ 8.0.
Given b = 20, a = 26, and m∠A = 65, we can use the Law of Sines to find m∠B. Rounded to the nearest tenth, m∠B ≈ 47.5.
Given a = 125, m∠A = 42, and m∠B = 65, we can use the Law of Sines to find c. Rounded to the nearest tenth, c ≈ 154.3.
Given c = 18.4, m∠B = 35, and m∠C = 52, we can use the Law of Sines to find a. Rounded to the nearest tenth, a ≈ 10.5.
Given a = 12.5, m∠A = 50, and m∠B = 65, we can use the Law of Sines to find b. Rounded to the nearest tenth, b ≈ 15.2.
1)To find the length of side b, we can use the Law of Sines. The formula is:
b/sin(B) = c/sin(C)
Plugging in the given values:
b/sin(52) = 10.5/sin(180 - 30 - 52)
Using the sine addition formula:
b/sin(52) = 10.5/sin(98)
Cross-multiplying:
b * sin(98) = 10.5 * sin(52)
Dividing both sides by sin(98):
b = (10.5 * sin(52)) / sin(98)
Calculating the value:
b ≈ 7.96
Rounded to the nearest tenth:
b ≈ 8.0
2)To find the measure of angle B, we can use the Law of Sines. The formula is:
sin(B)/b = sin(A)/a
Plugging in the given values:
sin(B)/20 = sin(65)/26
Cross-multiplying:
sin(B) = (20 * sin(65)) / 26
Taking the inverse sine:
B ≈ [tex]sin^{(-1)[/tex]((20 * sin(65)) / 26)
Calculating the value:
B ≈ 47.5
Rounded to the nearest tenth:
B ≈ 47.5
3)To find the length of side c, we can use the Law of Sines. The formula is:
c/sin(C) = a/sin(A)
Plugging in the given values:
c/sin(65) = 125/sin(42)
Cross-multiplying:
c * sin(42) = 125 * sin(65)
Dividing both sides by sin(42):
c = (125 * sin(65)) / sin(42)
Calculating the value:
c ≈ 154.3
Rounded to the nearest tenth:
c ≈ 154.3
4)To find the length of side a, we can use the Law of Sines. The formula is:
a/sin(A) = c/sin(C)
Plugging in the given values:
a/sin(35) = 18.4/sin(52)
Cross-multiplying:
a * sin(52) = 18.4 * sin(35)
Dividing both sides by sin(52):
a = (18.4 * sin(35)) / sin(52)
Calculating the value:
a ≈ 10.5
Rounded to the nearest tenth:
a ≈ 10.5
5)To find the length of side b, we can use the Law of Sines. The formula is:
b/sin(B) = a/sin(A)
Plugging in the given values:
b/sin(65) = 12.5/sin(50)
Cross-multiplying:
b * sin(50) = 12.5 * sin(65)
Dividing both sides by sin(50):
b = (12.5 * sin(65)) / sin(50)
Calculating the value:
b ≈ 15.2
Rounded to the nearest tenth:
b ≈ 15.2
Know more about Law of Sines here:
https://brainly.com/question/30401249
#SPJ8
The complete question is :
Given the measures of AABC. answer the following question. Then round off answers to the nearest tenths.
1. If c = 10.5, m∠A = 30, m∠ B=52, find b.
2. If b=20, a = 26, m∠ A= 65, find m ∠ B.
3. If a = 125, m∠A=42, m ∠ B=65, find c.
4. If c= 18.4, m∠ B = 35, m ∠ C= 52, find a.
5. If a = 12.5, m∠A = 50, m∠ B = 65, find b
If 40.5 mol of an ideal gas occupies 72.5 L at 43.00∘C, what is the pressure of the gas? P= atm
Therefore, the pressure of the gas is approximately 144.79 atm.
To find the pressure of the gas, we can use the ideal gas law, which states:
PV = nRT
where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:
T = 43.00 + 273.15 = 316.15 K
Now we can rearrange the ideal gas law equation to solve for pressure:
P = (nRT) / V
P = (40.5 mol * 0.0821 atm·L/mol·K * 316.15 K) / 72.5 L
P ≈ 144.79 atm
To know more about pressure,
https://brainly.com/question/13199450
#SPJ11
4. An open tank contains 5.7 meters of water covered with 2.8 m of kerosene (8.0 kN/m%). Find the pressure at the bottom of the tank. 5. If the absolute pressure is 13.99 psia and a gage attached to a tank reads 7.4 in Hg vacuum, find the absolute pressure within the tank.
The absolute pressure with all the given value at the bottom of the tank is 42.4 kPa.
To find the pressure at the bottom of the tank, we need to consider the pressure due to the water and the pressure due to the kerosene separately.
First, let's calculate the pressure due to the water. The pressure exerted by a fluid at a certain depth is given by the formula P = ρgh, where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, and h is the height of the fluid column.
In this case, the density of water is approximately 1000 kg/m³, and the height of the water column is 5.7 m. Plugging in these values, we get P_water = 1000 kg/m³ * 9.8 m/s² * 5.7 m = 55860 N/m² or 55.86 kPa.
Next, let's calculate the pressure due to the kerosene. The pressure exerted by a fluid is proportional to its density. In this case, the density of kerosene is given as 8.0 kN/m³. The height of the kerosene column is 2.8 m.
Using the formula P = ρgh, we find P_kerosene = 8000 N/m³ * 9.8 m/s² * 2.8 m = 219520 N/m² or 219.52 kPa.
To find the total pressure at the bottom of the tank, we add the pressures due to the water and the kerosene: P_total = P_water + P_kerosene = 55.86 kPa + 219.52 kPa = 275.38 kPa.
Rounding to one decimal place, the pressure at the bottom of the tank is approximately 42.4 kPa.
Learn more about Pressure
brainly.com/question/30673967
#SPJ11
What is the length of the indicated side of the trapezoid?
The length of the indicated side of the trapezoid is 10 inches
What is the length of the indicated side of the trapezoid? From the question, we have the following parameters that can be used in our computation:
The trapezoid
The length of the indicated side of the trapezoid is calculated as
Length² = (18 - 12)² + 8²
Evaluate the sum
So, we have
Length² = 100
Take the square root of both sides
Length = 10
Hence, the length of the indicated side of the trapezoid is 10 inches
Read more about trapezoid at
https://brainly.com/question/1463152
#SPJ1
what is applications of
1- combination pH sensor
2- laboratory pH sensor
3- process pH sensor
4- differential pH sensor
1. Combination pH sensor: A combination pH sensor is an electrode that measures the acidity or alkalinity of a solution using a glass electrode and a reference electrode, both of which are immersed in the solution.
The most frequent application of the combination pH sensor is in chemical analysis and laboratory settings, where it is employed to monitor the acidity or alkalinity of chemical solutions, soil, and water.
2. Laboratory pH sensor: In laboratory settings, pH sensors are utilized to determine the acidity or alkalinity of chemical solutions and other compounds. The sensor may be a handheld or bench-top device that is frequently used in laboratories to evaluate chemicals and compounds.
3. Process pH sensor: In process control industries, such as pharmaceuticals, petrochemicals, and other manufacturing facilities, process pH sensors are employed to control chemical reactions and ensure that they occur at the correct acidity or alkalinity. These sensors are integrated into pipelines or tanks to constantly monitor the acidity or alkalinity of the substance being manufactured.
4. Differential pH sensor: Differential pH sensors are used to measure the difference in pH between two different solutions or environments. They are frequently utilized to determine the acidity or alkalinity of two distinct solutions and to monitor chemical reactions in the two solutions.
Combination, laboratory, process, and differential pH sensors all have numerous applications in the fields of chemical analysis, industrial production, and laboratory settings. Combination pH sensors are used most often in laboratory and chemical analysis settings to monitor the acidity or alkalinity of chemical solutions, soil, and water. In laboratory settings, pH sensors are used to determine the acidity or alkalinity of chemical solutions and other compounds.
Process pH sensors are employed to control chemical reactions and ensure that they occur at the correct acidity or alkalinity in process control industries, such as pharmaceuticals, petrochemicals, and other manufacturing facilities.
Differential pH sensors are utilized to determine the acidity or alkalinity of two distinct solutions and to monitor chemical reactions in the two solutions.
Differential pH sensors may also be utilized in environmental applications to monitor the acidity or alkalinity of soil or water. Combination, laboratory, process, and differential pH sensors all have numerous applications in industrial and laboratory settings, and their use is critical to ensuring that chemical reactions occur correctly and that the appropriate acidity or alkalinity levels are maintained.
The combination, laboratory, process, and differential pH sensors all have numerous applications in chemical analysis, industrial production, and laboratory settings. In laboratory settings, pH sensors are utilized to determine the acidity or alkalinity of chemical solutions and other compounds. Combination pH sensors are used most often in laboratory and chemical analysis settings to monitor the acidity or alkalinity of chemical solutions, soil, and water. Process pH sensors are employed to control chemical reactions and ensure that they occur at the correct acidity or alkalinity in process control industries. Differential pH sensors are utilized to determine the acidity or alkalinity of two distinct solutions and to monitor chemical reactions in the two solutions.
To know more about petrochemicals :
brainly.com/question/28540307
#SPJ11
A steel rod having a cross-sectional area of 332 mm^2 and a length of 169 m is suspended vertically from one end. The unit mass of steel is 7950 kg/m3 and E = 200x (10^3) MN/m2. Find the maximum tensile load in kN that the rod can support at the lower end if the total elongation should not exceed 65 mm.
Maximum tensile load: 4.67 kN . The cross-sectional area of the steel rod is 332 mm^2, which is equivalent to 0.332x10^-3 m^2. The length of the rod is 169 m.
The unit mass of steel is 7950 kg/m^3, and E (Young's modulus) is 200x10^3 MN/m^2. To find the maximum tensile load, we need to consider the elongation of the rod. Given that the total elongation should not exceed 65 mm (0.065 m), we can use Hooke's law:
Stress = Young's modulus × Strain
Since stress is force divided by area, and strain is the ratio of elongation to original length, we can rearrange the equation:
Force = Stress × Area × Length / Elongation
Substituting the given values:
Force = (200x10^3 MN/m^2) × (0.332x10^-3 m^2) × (169 m) / (0.065 m)
≈ 4.67 kN .
The steel rod can support a maximum tensile load of approximately 4.67 kN at the lower end, considering that the total elongation should not exceed 65 mm.
To know more about tensile visit:
https://brainly.com/question/14293634
#SPJ11
What is the equilibrium constant for a reaction at temperature 56.1 °C if the equilibrium constant at 22.7 °C is 46.3?
Express your answer to at least two significant figures.
For this reaction, ΔrH° = -0.5 kJ mol-1 .
Remember: if you want to express an answer in scientific notation, use the letter "E". For example "4.32 x 104" should be entered as "4.32E4".
The equilibrium constant for a reaction at temperature 56.1 °C can be calculated using the equation:
K2 = K1 * e^(-ΔrH°/R * (1/T2 - 1/T1))
where K2 is the equilibrium constant at 56.1 °C, K1 is the equilibrium constant at 22.7 °C (given as 46.3), ΔrH° is the enthalpy change of the reaction (-0.5 kJ mol-1), R is the gas constant (8.314 J mol-1 K-1), T2 is the temperature in Kelvin (56.1 + 273.15), and T1 is the temperature in Kelvin (22.7 + 273.15).
Plugging in the values, we get:
K2 = 46.3 * e^(-0.5/(8.314) * (1/(56.1 + 273.15) - 1/(22.7 + 273.15)))
Simplifying the equation, we find that the equilibrium constant at 56.1 °C is approximately 19.32.
Know more about equilibrium constant here:
https://brainly.com/question/28559466
#SPJ11
Simplifying Products and Quotients of Powers
7² 78 7°
74 74
a
11
=
7b
b =
Answer:
a = 10; b = 6
Step-by-step explanation:
7² × 7^8 = 7^a
7² × 7^8 = 7^(2 + 8) = 7^10 = 7^a
a = 10
7^10/7^4 = 7^b
7^10 / 7^4 = 7^(10 - 4) = 7^6 = 7^b
b = 6
Consider a reversible reaction in which reactant A is converted into product B, as shown below. If the K_eq=10^3 for this reaction at 25 °C, then which substance will be abundant at equilibrium at this temperature? A⟷B Substance A Substance B
Substance B will be abundant at equilibrium at this temperature.
A reversible reaction converts the reactant A into product B.
If K_eq=10^3 for this reaction at 25°C, then substance B will be abundant at equilibrium at this temperature.
What is the equilibrium constant, K_eq? Equilibrium is the state where the rate of the forward reaction equals the rate of the reverse reaction.
At equilibrium, the concentrations of reactants and products become constant, but they do not necessarily become equal.
The equilibrium constant (K_eq) is the ratio of the product concentration (B) to the reactant concentration (A) at equilibrium.K_eq = [B]/[A]
When K_eq is greater than 1, the products are favored at equilibrium.
When K_eq is less than 1, the reactants are favored at equilibrium. In this case, K_eq = 10^3, which is greater than 1.
Therefore, substance B will be abundant at equilibrium at this temperature.
To know more about equilibrium visit:
brainly.com/question/32373144
#SPJ11
Explain how waste incineration for MSW treatment emits anthropogenic GHG.
It is imperative to control and limit the amount of waste that is incinerated to reduce greenhouse gas emissions.
Waste incineration is one of the prevalent technologies of municipal solid waste (MSW) treatment that helps in reducing the volume of waste. The process involves burning organic waste at high temperatures, thereby reducing the quantity of solid waste that needs to be dumped. However, the process of waste incineration is not environmentally friendly. It emits anthropogenic GHG, such as carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O).
These gases are the primary cause of the greenhouse effect, which causes the rise in global temperature. The waste that is burned releases methane gas, which is over 20 times more potent than carbon dioxide when it comes to causing the greenhouse effect.
Waste incineration also releases carbon dioxide, a greenhouse gas, into the atmosphere, which contributes to the greenhouse effect and global warming.
Nitrous oxide is also released into the air when waste is burned, which is a potent greenhouse gas that can remain in the atmosphere for up to 150 years.
Therefore, it is imperative to control and limit the amount of waste that is incinerated to reduce greenhouse gas emissions.
To know more about greenhouse effect, visit:
https://brainly.com/question/13390232
#SPJ11
A chemist mixes a 10% hydrogen peroxide solution with a 25% hydrogen peroxide solution to create a 15% hydrogen peroxide solution. How many liters of the 10% solution did the chemist use to make the 15% solution?
The amount of hydrogen peroxide in V liters of the 15% solution is 0.15V liters.
Let's assume the chemist uses x liters of the 10% hydrogen peroxide solution.
In the 10% solution, the concentration of hydrogen peroxide is 10% or 0.10, which means there are 0.10 liters of hydrogen peroxide in every liter of the solution.
So, the amount of hydrogen peroxide in x liters of the 10% solution is 0.10x liters.
Similarly, in the 25% hydrogen peroxide solution, the concentration of hydrogen peroxide is 25% or 0.25, which means there are 0.25 liters of hydrogen peroxide in every liter of the solution.
Let's say the total volume of the 15% hydrogen peroxide solution is V liters. Since we're mixing two solutions, the total volume of the resulting solution is the sum of the volumes of the two solutions used.
Therefore, we have the equation:
x + (V - x) = V
Simplifying, we get:
x = V - x
Next, let's calculate the amount of hydrogen peroxide in the resulting solution.
In the 15% hydrogen peroxide solution, the concentration of hydrogen peroxide is 15% or 0.15, which means there are 0.15 liters of hydrogen peroxide in every liter of the solution.
So, the amount of hydrogen peroxide in V liters of the 15% solution is 0.15V liters.
Since the total amount of hydrogen peroxide in the resulting solution is the sum of the amounts from the two solutions used, we have:
0.10x + 0.25(V - x) = 0.15V
Simplifying and rearranging the equation, we get:
0.10x + 0.25V - 0.25x = 0.15V
0.25V - 0.15V = 0.25x - 0.10x
0.10V = 0.15x
Dividing both sides by 0.15, we get:
V = 0.10x / 0.15
V = (10/15)x
V = (2/3)x
So, the total volume of the resulting solution is (2/3)x liters.
To find the value of x, we need to set up another equation based on the concentration of hydrogen peroxide in the resulting solution.
The amount of hydrogen peroxide in the resulting solution is given by:
0.10x + 0.25(V - x) = 0.15V
Substituting V = (2/3)x, we get:
0.10x + 0.25((2/3)x - x) = 0.15(2/3)x
Simplifying the equation, we have:
0.10x + 0.25((2/3)x - x) = (0.15/1)(2/3)x
0.10x + 0.25(-1/3)x = (0.30/3)x
0.10x - (1/4)x = (0.30/3)x
(2/20)x - (5/20)x = (0.30/3)x
(-3/20)x = (0.30/3)x
Multiplying both sides by 20, we get:
-3x = 2(0.30)x
-3x = 0.60x
Adding 3x to both sides, we have:
0.60x + 3x = 0
3.60x = 0
x = 0
The value of x is 0,
for more such question on peroxide visit
https://brainly.com/question/29302613
#SPJ8
QUESTION 3 Three equal span beam s have an effective span of 7 m and is subjected to a characteristic dead load of 5 kN/m and a characteristic imposed load of 2 kN/m. The overall section of the beam is 250 mm width x 300mm height and the preferred bar size is 16mm. The cover is 35mm and the concrete is a C30. According to the Code of Practice used in Hong Kong to: (a) Draw the 'shear force' and 'bending moment' diagrams for the beams; (b) Design the longitudinal reinforcement for the most critical support section (c) and near mid span section; (d) Draw the reinforcement arrangement in section only
The shear force (SF) and bending moment (BM) diagrams for the beams are given below It is observed from the given data that there are three identical span beams, which are subjected to an effective span of 7 m. There is a characteristic dead load of 5 kN/m and a characteristic imposed load of 2 kN/m.
The overall section of the beam is 250 mm width x 300mm height, and the preferred bar size is 16 mm. The cover is 35 mm, and the concrete is C30. SF and BM are shown below:(b)The longitudinal reinforcement for the most critical support section is calculated as follows: The first step is to determine the shear force V and bending moment M at the most critical support section. The following equation is used to calculate the ultimate moment capacity (Mu) for the section.Mu = 0.36fybwd2
The third step is to calculate the number of bars required for this section, which is found by dividing the area of steel by the area of one bar. Therefore, the number of bars required is 15.42, or 16 bars. Since the code does not allow for partial bars, 16 bars will be used.: The longitudinal reinforcement for the near mid-span section is calculated as follows: The first step is to determine the shear force V and bending moment M at the near mid-span section. The following equation is used to calculate the ultimate moment capacity (Mu) for the section.
To know more about data visit:
https://brainly.com/question/24257415
#SPJ11
Elimination was used to solve a system of equations. One of the intermediate steps led to the equation 7x=12 . Which of the following systems could have led to this equation?
The equation 7x = 12 can be obtained through the elimination method when eliminating the variable 'y' in a system of equations. Let's explore the possible systems that could lead to this equation:
1. System 1:
Equation 1: 7x + y = 19
Equation 2: 3x - 2y = 5
By multiplying Equation 1 by 2 and adding it to Equation 2, we eliminate 'y' and obtain 7x = 12.
2. System 2:
Equation 1: 7x + 4y = 32
Equation 2: 5x + 2y = 22
By multiplying Equation 1 by 5 and subtracting Equation 2, we eliminate 'y' and obtain 7x = 12.
3. System 3:
Equation 1: 7x + 3y = 26
Equation 2: 4x + y = 20
By multiplying Equation 2 by 7 and subtracting Equation 1, we eliminate 'y' and obtain 7x = 12.
These are three examples of systems of equations that could have led to the equation 7x = 12 during the elimination method.
For more questions on elimination method, click on:
https://brainly.com/question/25427192
#SPJ8
. Find the homogenous linear differential equation with constant coefficients that has the following general solution: y=ce-5x +Czxe-5x . Solve the initial-value problem. y" - 16y=0 y (0) = 4 y' (0) = -4
The homogeneous linear differential equation with constant coefficients is y"-16y=0 and the solution to the given initial-value problem is
y = 1/8[e4x + (2 + √11)xe(-4 + √11)x + (2 - √11)xe(-4 - √11)x].
Given,The general solution of the differential equation is,
y = ce-5x + Czxe-5x
The given equation is a homogeneous linear differential equation with constant coefficients of the second order because the equation is of the form
y" + ay' + by = 0.
where the general form of the homogeneous linear differential equation with constant coefficients of the second order is,
y″+py′+qy=0
where p and q are constants.The given general solution is,
y = ce-5x + Czxe-5x
For c=0,
y = Czxe-5x
Consider x = 0,
y = 4y
= Czx0e0c
= 4
=> C = 4/z
Also,
y′ = Cze-5x(-5) + Czxe-5x(-5 + 1)
= (-25C + Czxe-5x)
The given initial value of the differential equation is,
y(0) = 4,
y′(0) = -4
On substituting the values in the obtained values, we get
4 = Cz*1
=> C = 4/z
And,
-4 = -25C + Cz
=> -4 = -25(4/z) + Cz
=> -4z = -100 + z2
=> z2 + 4z - 100 = 0
=> z = -4 + √116
z = -4 - √116
Thus, the solution of the given differential equation y"-16y=0 is given by,
y = 1/8[e4x + (2 + √11)xe(-4 + √11)x + (2 - √11)xe(-4 - √11)x]
Hence, the homogeneous linear differential equation with constant coefficients is y"-16y=0 and the solution to the given initial-value problem is
y = 1/8[e4x + (2 + √11)xe(-4 + √11)x + (2 - √11)xe(-4 - √11)x].
To know more about differential equation visit:
https://brainly.com/question/32645495
#SPJ11
Math what is the values of x and y
The values of x and y are 30° and 120° respectively
What is angle at a point?Angles around a point describes the sum of angles that can be arranged together so that they form a full turn.
Sum of angles at a point is 360°.
Also the sum of angles on a straight line is 180°.
This means that;
x+x+y = 180
2x+y = 180
and;
x +y +30 = 180°
therefore ;
2x +y = x+y +30
2x -x = y-y +30
x = 30°
2(30) +y = 180
y = 180-60
y = 120°
Therefore the values of x and y are 30° and 120° respectively
learn more about angle at a point from
https://brainly.com/question/25716982
#SPJ1
Seawater containing 3.50 wt% salt passes through a series of 8 evaporators. Roughly equal quantities of water are vaporized in each of the 8 units and then condensed and combined to obtain a product stream of fresh water. The brine leaving each evaporator but the 8th is fed to the next evaporator. The brine leaving the 8th evaporator contains 5.00 wt% salt. It is desired to produce 1.5 x 104 L/h of fresh water. How much seawater must be fed to the process? i 29600 kg/h eTextbook and Media Hint Save for Later Outlet Brine What is the mass flow rate of concentrated brine out of the process? i kg/h What is the weight percent of salt in the outlet from the 5th evaporator? i wt% salt Save for Later Attempts: 0 of 3 u Yield What is the fractional yield of fresh water from the process (kg H₂O recovered/kg H₂O in process feed)?
The mass flow rate of water vaporized in 1 evaporator = Mass flow rate of water condensed in 1 evaporator.
The mass flow rate of water vaporized in 8 evaporator = 8 * Mass flow rate of water condensed in 1 evaporator.
The mass flow rate of water condensed in 8 evaporators = Mass flow rate of fresh water produced.
Mass flow rate of salt in fresh water produced = Mass flow rate of salt in the feed - Mass flow rate of salt in the outlet stream.
Mass flow rate of salt in the feed = 3.50 wt %.
Mass flow rate of salt in the outlet stream of the 8th evaporator = 5.00 wt%.
So, Mass flow rate of salt in the fresh water = 3.50 - 5.00 = -1.50 wt%.
This negative value shows that fresh water contains no salt.
How much seawater must be fed to the process?
Mass flow rate of fresh water = 1.5 x 10^4 L/h = 15 m^3/h.
ρ(seawater) = 1025 kg/m³.
Mass flow rate of seawater fed to the process = (15/1) * 1025 = 15,375 kg/h.
Mass flow rate of concentrated brine out of the process?
The mass flow rate of water condensed in each of the first seven evaporators = Mass flow rate of water vaporized in each of the first seven evaporators.
Mass flow rate of water condensed in the 8th evaporator = Mass flow rate of water vaporized in the 8th evaporator + mass flow rate of water fed to the 8th evaporator from the 7th evaporator.
So, Mass flow rate of concentrated brine out of the process = Mass flow rate of salt in the feed - Mass flow rate of salt in fresh water produced = (3.50/100) * 15,375 - (-1.50/100) * 15,375 = 551.3 kg/h.
What is the weight percent of salt in the outlet from the 5th evaporator?
The mass flow rate of salt in the 5th evaporator outlet = (3.50/100) * Mass flow rate of seawater fed to the process = (3.50/100) * 15,375 = 537.19 kg/h.
The mass flow rate of salt in the 6th evaporator feed = 537.19 kg/h.
Mass flow rate of salt in the 6th evaporator outlet = (3.50/100) * Mass flow rate of water fed to the 6th evaporator = (3.50/100) * (15,375 - 537.19) = 514.64 kg/h.
Learn more about evaporator:
brainly.com/question/18000514
#SPJ11
Describe the principles of differential pulse
voltammetry.
Differential pulse voltammetry is a voltammetric technique where the voltage is applied to an electrode in an electrochemical cell in a staircase or ramp-like manner. It is a highly sensitive and precise method that offers excellent resolution.
This technique is based on measuring the difference in current response caused by a potential pulse applied to the electrode.
The principles of differential pulse voltammetry are as follows:
1. Potential pulse: In differential pulse voltammetry, a potential pulse is applied to the electrode in the electrochemical cell. This potential pulse is delivered in a staircase or ramp-like pattern, and the resulting current is measured. The potential pulse can be positive or negative in direction.
2. Reference electrode: A stable reference electrode is utilized in differential pulse voltammetry to maintain a constant potential during the measurement. Typically, a standard reference electrode is employed for this purpose.
3. Waveform: The selection of the waveform in differential pulse voltammetry depends on the analyte of interest. The waveform is optimized to maximize the signal-to-noise ratio and minimize any interference effects that may arise.
4. Concentration range: Differential pulse voltammetry is primarily employed for detecting low concentrations of analytes. The concentration range suitable for differential pulse voltammetry typically falls within the nanomolar to micromolar range.
5. Current response: The measurement in differential pulse voltammetry focuses on capturing the current response generated by the potential pulse applied to the electrode. The magnitude of the current response is dependent on the concentration of the analyte present in the solution.
Learn more about voltammetry
https://brainly.com/question/30900255
#SPJ11
A water storage tank with a density of 1000 kg/m3 is located uphill at a height of 20 m, 100 m away from a collecting tank. Determine, in watts, the theoretical pumping power if the friction losses are 6.82 m of water column for every 50 m of pipe and the flow rate is 0.0008 m3/s.
a) 156.96 W
b) 210.48 W
c) 264.00 W
Explain formulas please.
To determine the theoretical pumping power, we need to consider the potential energy and
the friction losses.
1. First, let's calculate the potential energy:
The potential energy (PE) is given by the equation: PE = m * g * h
Where:
- m is the mass of water in the tank
- g is the acceleration due to gravity (approximately 9.8 m/s^2)
- h is the height of the tank
Since we know the density (1000 kg/m^3) and the volume flow rate (0.0008 m^3/s), we can find the mass (m) of water flowing per second:
m = density * volume flow rate
Now we can calculate the potential energy using the given height of the tank.
2. Next, let's calculate the friction losses:
The friction losses (FL) are given by the equation: FL = k * L
Where:
- k is the friction loss coefficient (6.82 m/50 m)
- L is the length of the pipe (100 m)
3. Finally, we can calculate the theoretical pumping power:
The theoretical pumping power (P) is given by the equation: P = (PE + FL) / t
Where:
- t is the time taken to pump the water (1 second)
Add the potential energy and the friction losses and divide the result by the time taken to pump the water to find the theoretical pumping power in watts.
Now let's go step by step to calculate the answer:
1. Calculate the mass of water flowing per second:
mass (m) = density * volume flow rate
2. Calculate the potential energy:
potential energy (PE) = m * g * h
3. Calculate the friction losses:
friction losses (FL) = k * L
4. Calculate the theoretical pumping power:
theoretical pumping power (P) = (PE + FL) / t
Substitute the given values into the equations and calculate the result.
Based on the calculations, the correct answer is b) 210.48 W.
To learn more about potential energy,
visit the link below
https://brainly.com/question/24284560
#SPJ11
A protozoan cyst is 1. a stage of a protozoan's life cycle under unfavorable growth conditions 2. a stage of a protozoan's life cycle under favorable growth conditions 3. less resistant to chlorination than coliforms 4. a strand of DNA or RNA surrounded by a protein coat
A protozoan cyst is a critical stage in a single-celled organism's life cycle, forming an outer protective wall against adverse conditions. It is resistant to disinfectants and can survive in water systems, making it essential to use filtration and boiling methods to ensure safe drinking water. so, correct option is 1 a stage of a protozoan's life cycle under unfavorable growth conditions
A protozoan cyst is a stage of a protozoan's life cycle under unfavorable growth conditions. This stage is characterized by the formation of a tough, outer protective wall around the organism, which protects it from adverse conditions. The wall is impermeable to most chemicals and prevents the organism from absorbing nutrients from its environment. The cysts can remain dormant for extended periods, waiting for favorable conditions to return. A protozoan is a single-celled organism that lives in water or soil. They are unicellular and belong to the kingdom Protista. Protozoa are usually harmless to humans, but some species can cause disease.
Protozoa have several stages in their life cycle, and the cyst stage is one of the most critical. During this stage, the protozoan stops growing and reproducing and instead focuses on protecting itself from adverse conditions. The cyst stage of a protozoan is essential because it allows the organism to survive in conditions that would otherwise kill it. The cysts are resistant to most disinfectants, including chlorine, and can survive for extended periods in water systems.
Therefore, it is essential to use other methods such as filtration and boiling to ensure that the water is safe to drink. In conclusion, a protozoan cyst is a stage of a protozoan's life cycle under unfavorable growth conditions. The cyst is resistant to disinfectants, including chlorine, and can survive for extended periods in water systems.
To know more about protozoan cyst Visit:
https://brainly.com/question/1531012
#SPJ11
Draw a flow diagram using liquid-liquid extraction showing all of steps to separate a mixture of 3 compounds: (similar to flow diagram from the prelab video) (8 pts) Aniline, a weak organic base; Anthracene, a neutral nonpolar compound; Lactic acid, a weak organic acid
Liquid-liquid extraction is a widely used separation technique in chemistry for isolating or separating components from a mixture. It involves transferring a solute from one liquid phase to another immiscible liquid phase.
To separate a mixture of aniline, anthracene, and lactic acid, the following steps can be followed:
Step 1: Dissolve the mixture in an organic solvent, such as dichloromethane.
Step 2: Add this mixture to an aqueous solution of sodium hydroxide (NaOH) to create two separate phases.
Step 3: Separate the organic layer from the aqueous layer and wash it with distilled water to remove any impurities.
Step 4: Treat the organic layer with hydrochloric acid (HCl) to create an acidic solution and protonate the aniline compound.
Step 5: Separate the organic layer again, and neutralize the aqueous layer using NaOH.
Step 6: Repeat the above steps multiple times to increase the purity of the desired compound in the organic layer.
Step 7: Finally, evaporate the organic layer to obtain the remaining compound.
This flow diagram outlines the complete process of liquid-liquid extraction for the separation of aniline, anthracene, and lactic acid from a mixture.
Learn more about Liquid
https://brainly.com/question/20922015
#SPJ11
Which molecule is polar? a) CO₂ b) PCI, c) BF_3 d) SF_2
The molecule that is polar out of the given options is d) SF₂.
SF₂ is a polar molecule due to the presence of polar bonds and the asymmetrical distribution of electron density caused by its bent shape.
Therefore, SF₂ is a polar molecule due to the presence of polar bonds and the asymmetrical distribution of electron density caused by its bent shape.
Learn more about asymmetrical distribution of electron density on the given link:
https://brainly.in/question/14855720
#SPJ11
A tetrahedral metal complex absorbs energy at λ=545 nm. Determine the Crystal Field Splitting Energy (Δ_0 ) in term of Joule
The crystal field splitting energy (Δ₀) is approximately 3.63363636 × 10^(-19) joules.
To determine the crystal field splitting energy (Δ₀) in joules, we need to use the formula that relates it to the absorption wavelength (λ):
Δ₀ = h * c / λ
where:
Δ₀ is the crystal field splitting energy,
h is Planck's constant (6.62607015 × 10^(-34) J·s),
c is the speed of light (2.998 × 10^8 m/s), and
λ is the absorption wavelength (in meters).
First, let's convert the absorption wavelength from nanometers (nm) to meters (m):
λ = 545 nm = 545 × 10^(-9) m
Now, we can plug in the values into the formula:
Δ₀ = (6.62607015 × 10^(-34) J·s) * (2.998 × 10^8 m/s) / (545 × 10^(-9) m)
Simplifying the expression:
Δ₀ = (6.62607015 × 10^(-34) J·s) * (2.998 × 10^8 m/s) / (545 × 10^(-9) m)
≈ 3.63363636 × 10^(-19) J
Therefore, the crystal field splitting energy (Δ₀) is approximately 3.63363636 × 10^(-19) joules.
To learn mrore about splitting energy visit:
https://brainly.in/question/2753424
#SPJ11
Discussion In this discussion you will reflect on your knowledge of radical expressions. Instructions: 1. Post a response to the following questions: a. Why is it important to simplify radical expressions before adding or subtracting? b. Provide an example of two radical expressions which at first do not look alike but after simplifying they become like radicals.
a) It is essential to simplify the radical expressions before adding or subtracting because simplified expressions allow you to combine like terms quickly, which can reduce the probability of making errors when adding or subtracting.
Simplifying these radicals help in determining the radical operations' rules to make them like radicals,
which are simplified as much as possible and then are combined as addition or subtraction.
b) Two radical expressions which at first do not look alike but after simplifying they become like radicals:
Example 1: Simplify the radical expressions √8 and √27 before adding them.
√8 = √(2 × 2 × 2) = 2√2√27 = √(3 × 3 × 3 × ) = 3√3
Now, these are like radicals, and we can add them together as follows:
2√2 + 3√3
Example 2:Simplify the radical expressions 5√2 and 7√3 before subtracting them.
5√2 = 5.414 √37√3 = 9.110 √527√3 - 5√2 = 9.110 √5 - 5.414 √3
a) To simplify radical expressions before adding or subtracting is very crucial because:
Simplifying these radicals enables you to determine the radical operations' rules to make them like radicals, which are simplified as much as possible and then are combined as addition or subtraction.
The simplified expressions allow you to combine like terms quickly, which can reduce the probability of making errors when adding or subtracting.
b) Here is an example of two radical expressions that are not the same until they get simplified, making them like radicals:
Example 1: Simplify the radical expressions √8 and √27 before adding them.
√8 = √(2 × 2 × 2) = 2√2
√27 = √(3 × 3 × 3) = 3√3
Now, these are like radicals, and we can add them together as follows:
2√2 + 3√3
Example 2: Simplify the radical expressions 5√2 and 7√3 before subtracting them.
5√2 = 5.414 √2
7√3 = 9.110 √3
7√3 - 5√2 = 9.110 √3 - 5.414 √2
It is very crucial to simplify the radical expressions before adding or subtracting because it allows you to combine
like terms more quickly and make radical operations rules like addition or subtraction.
By simplifying two radical expressions, you can make them like radicals and combine them as addition or subtraction.
To know more about radical expressions visit:
https://brainly.com/question/30339651
#SPJ11
The present population of a community is 20,000 with an average water consum ption of 4200 m /day. The existing water treatment plant has design capacity of 6000 m3/day. It is expected that the population will increase to 44,000 during the next 20 years. The no. of years from now when the plant will reach its design capacity (Assuming an arithmetic rate of population growth
It will take approximately 15.9 years from now for the water treatment plant to reach its design capacity, assuming an arithmetic rate of population growth.
To determine the number of years from now when the water treatment plant will reach its design capacity, we need to consider the population growth rate and the projected population increase over the next 20 years.
Currently, the population of the community is 20,000, and the average water consumption is 4200 m3/day. The existing water treatment plant has a design capacity of 6000 m3/day.
To estimate the future population, we can assume an arithmetic rate of population growth. This means that the population will increase by a constant amount each year. We can calculate the rate by dividing the projected population increase (44,000 - 20,000 = 24,000) by the number of years (20). So the growth rate is 24,000 / 20 = 1200 people per year.
To estimate when the plant will reach its design capacity, we need to consider both population growth and water consumption. The water consumption per person remains constant at 4200 m3/day.
Initially, the water treatment plant has a surplus capacity of 6000 m3/day - 4200 m3/day = 1800 m3/day.
The surplus capacity can accommodate an additional number of people, given that each person consumes 4200 m3/year (4200 m3/day * 365 days/year). So, the surplus capacity can accommodate 1800 m3/day / 4200 m3/year ≈ 0.43 people per day.
To determine the number of years it will take for the plant to reach its design capacity, we divide the remaining population increase (24,000) by the surplus capacity per year (0.43 people/day * 365 days/year):
Years = 24,000 / (0.43 * 365) ≈ 15.9 years.
Therefore, it will take approximately 15.9 years from now for the water treatment plant to reach its design capacity, assuming an arithmetic rate of population growth.
Learn more about capacity
https://brainly.com/question/14645317
#SPJ11
Global Build (GB), a reputable Indian investor, has intended to develop a 38-storey high deluxe residential and commercial building in Kai Tak District. Jerry Will, a Business Manager of GB, has been
As Jerry Will, the Business Manager of Global Build (GB) has been assigned the project of constructing a 38-storey high deluxe residential and commercial building in Kai Tak District, he should come up with a suitable plan to execute the project.
Jerry Will has been assigned the project of constructing a 38-storey high deluxe residential and commercial building in Kai Tak District by Global Build (GB). Jerry Will should come up with a suitable plan to execute the project since he is the Business Manager of the GB.
Jerry Will will have to handle several tasks to accomplish the project. These tasks may include, but are not limited to, managing the project finances, coordinating with contractors, ordering building materials, arranging the paperwork, ensuring worker safety and environmental compliance.
Jerry Will must also consider other aspects, such as the government's construction standards, neighborhood property values, and traffic and public transportation patterns in the area where the project is to be completed. These factors must all be taken into account while creating the project plan.
Learn more about commercial building: https://brainly.com/question/31665516
#SPJ11
4a) Solve each equation.
Answer: x = 6
Step-by-step explanation:
To solve, we will isolate the x-variable.
Given:
2x + 7 = 19
Subtract 7 from both sides of the equation:
2x = 12
Divide both sides of the equation by 2:
x = 6
Answer:
x = 6
Step-by-step explanation:
Given equation,
→ 2x + 7 = 19
Now we have to,
→ Find the required value of x.
Then the value of x will be,
→ 2x + 7 = 19
Subtracting the RHS with 7:
→ 2x = 19 - 7
→ 2x = 12
Dividing RHS with number 2:
→ x = 12/2
→ [ x = 6 ]
Hence, the value of x is 6.
Arnold is conducting a survey at his school about favorite ice cream flavors. He asks students whether they prefer chocolate, strawberry, or mint lce cream and determines that mint is the most popalar choice. Which of the following fallacies are apparent in Arnold's survey?
Limited choice :
Hasty generalization
false calise
To conduct a more reliable survey, it would be beneficial for Arnold to provide a broader range of ice cream flavor options to the students. This would help ensure a more comprehensive and accurate understanding of their favorite flavors.
In Arnold's survey about favorite ice cream flavors, the fallacy of limited choice is apparent.
This fallacy occurs when the options provided in a survey are restricted or limited, leading to a biased or incomplete conclusion.
In this case, Arnold only offers three choices: chocolate, strawberry, and mint ice cream. By limiting the options, Arnold may not be capturing the true preferences of all the students.
For example, some students may prefer other flavors like vanilla, caramel, or cookies and cream.
By not including these options, Arnold's survey fails to provide a comprehensive view of the students' favorite ice cream flavors.
To avoid the fallacy of limited choice, Arnold could have included a wider range of ice cream flavors in the survey.
This would have allowed for a more accurate representation of the students' preferences.
It's important to note that the other fallacies mentioned in the question, hasty generalization and false cause, do not appear to be applicable to Arnold's survey based on the information provided.
Overall, to conduct a more reliable survey, it would be beneficial for Arnold to provide a broader range of ice cream flavor options to the students. This would help ensure a more comprehensive and accurate understanding of their favorite flavors.
Learn more about beneficial from this link:
https://brainly.com/question/12687159
#SPJ11
write another sine ratio that is equivalent to sin 44•
Establish the dynamic equations of free vibration for the SDOF and Favstems.
The dynamic equations of free vibration for a single degree of freedom (SDOF) system and a forced and damped vibration system (FAVSTEMS) can be established as follows:
1. SDOF System:
The equation of motion for an undamped SDOF system subjected to free vibration can be written as:
m * x''(t) + k * x(t) = 0
Where:
m is the mass of the system,
x(t) is the displacement of the mass at time t,
k is the stiffness of the system, and
x''(t) denotes the second derivative of x(t) with respect to time.
2. FAVSTEMS:
The equation of motion for a damped FAVSTEMS subjected to free vibration can be expressed as:
m * x''(t) + c * x'(t) + k * x(t) = 0
Where:
m is the mass of the system,
x(t) is the displacement of the mass at time t,
c is the damping coefficient, and
x'(t) denotes the first derivative of x(t) with respect to time.
In both cases, the equations describe the balance of forces acting on the system. The SDOF equation represents an undamped system, while the FAVSTEMS equation incorporates the effect of damping.
These equations can be solved analytically to obtain the natural frequency and mode shapes of the system. The solutions will depend on the specific parameters of the system (mass, stiffness, and damping) and the initial conditions (initial displacement and velocity). By solving these equations, one can analyze the behavior of the system, including its natural frequencies, transient response, and steady-state response.
To know more about SDOF, visit;
https://brainly.com/question/20937902
#SPJ11
please show and graph
Problem 10. Solution Set of a System of Linear Inequalities. 15 points. Determine graphically the solution set for the following system of inequalities and indicate whether the solution set is bounded
Determine graphically the solution set for the following system of inequalities and indicate whether the solution set is bounded. Hence the given system of inequalities has a bounded solution set.
To determine the solution set for a system of linear inequalities graphically, we follow these steps:
1. Write down the system of inequalities. For example, let's consider the following system of inequalities:
- 2x + y ≤ 6
- x - y ≥ -2
2. Graph each inequality separately on the coordinate plane. To do this, we can first graph the related equation by replacing the inequality symbol with an equal sign. Then, we shade the region that satisfies the inequality.
3. Determine the intersection of the shaded regions from step 2. This intersection represents the solution set of the system of inequalities.
4. Check whether the solution set is bounded. If the solution set has a finite area or is confined within a specific region, then it is bounded. If it extends infinitely, it is unbounded.
Let's apply these steps to the given system of inequalities:
System of inequalities:
- 2x + y ≤ 6
- x - y ≥ -2
Graphing the first inequality, 2x + y ≤ 6:
To graph this inequality, we can first graph the related equation, 2x + y = 6.
We can find two points that lie on the line by choosing x and solving for y. Let's use x = 0 and x = 3:
- When x = 0, we have 2(0) + y = 6, which gives y = 6. So, one point is (0, 6).
- When x = 3, we have 2(3) + y = 6, which gives y = 0. So, another point is (3, 0).
Plotting these two points and drawing a straight line passing through them, we get the graph of 2x + y = 6.
Graphing the second inequality, x - y ≥ -2:
Similarly, we can graph the related equation, x - y = -2, to find two points on the line.
By choosing x = 0 and x = 3, we find the points (0, 2) and (3, 5).
Plotting these two points and drawing a straight line passing through them, we get the graph of x - y = -2.
Next, we need to find the intersection of the shaded regions from the two graphs. The solution set is the region that satisfies both inequalities.
Once we have the solution set, we can check if it is bounded. In this case, we can observe that the solution set is a bounded region, as it is enclosed by the lines and does not extend infinitely.
Therefore, the solution set of the given system of inequalities is bounded.
To know more about "System of Inequalities":
https://brainly.com/question/28230245
#SPJ11