A designer is creating an obstacle for an obstacle course where a person starts on a moveable platform of height H from the ground. The person grabs a rope of length L and swings downward. At the instant the rope is vertical, the person lets go of the rope and attempts to reach the far side of a water-filled moat. The left side of the moat is directly below the position where the person will let go of the rope. The designer runs several tests in which the rope has different lengths and moves the platform such that the rope is always initially horizontal. The designer notices that the person cannot land on the other side if the length L is very short. The designer also notices that the person also cannot land on the other side if the length L is very close to the height H.
Assume the size of the person is much smaller than the lengths L and H. Let D represent the horizontal distance from below the release point to where the person lands.
Required:
a. Why does the person land in the moat if the rope's length is very short?
b. Why does the person land in the moat if the length is nearly the same as the height of the platform?
Answers
Answer:
* when L → H chord too long
in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross
* when L → 0 very short string
the speed of the platform is very small, so we do not have the minimum required value
vox = √ (g / (2 (H)) D
Explanation:
For this exercise we are going to solve it using conservation of energy to find the velocity of the body and the launch of projectiles to find the velocity to cross the well.
Let's start with the projectile launch
as the body leaves the vertical its velocity must be horizontal
x = v₀ₓ t
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
when reaching the ground its height of zero (y = 0) and the initial vertical velocity is zero
t = √ 2 y₀ / g
we substitute
x = vox √2y₀ / g
v₀ₓ = √(g / 2y₀) x
In the exercise, it tells us that the width of the well is D (x = D) and the initial height is the height of the platform minus the length of the rope (I = H - L)
v₀ₓ = √(g /(2 (H -L)) D
this is the minimum speed to cross the well.
Now let's use conservation of energy
starting point. On the platform
[tex]Em_{o}[/tex] = U = m g H
final point. At the bottom of the swing
Em_{f} = K + U = 1 / 2m v² + m g (H -L)
as there is no friction the mechanical energy is conserved
Em_{o} = Em_{f}
m g H = 1 / 2m v² + m g (H -L)
v = √ (2gL)
let's write our two equations
the minimum speed to cross the well
v₀ₓ = √ (g /(2 (H -L)) D
the speed at the bottom of the oscillatory motion
v = √ (2g L)
we analyze the extreme cases
* when L → H chord too long
in this case we see that the speed to cross the well grows a lot (it goes towards infinity) therefore we do not have enough speed in the movement to cross
* when L → 0 very short string
the speed of the platform is very small, so we do not have the minimum required value
vox = √ (g / (2 (H)) D
From this analysis we see that there is a range of lengths that allows us to have the necessary speeds to cross the well
V₀ₓ = v
g / (2 (H -L) D² = 2g L
4 L (H- L) = D²
4 H L - 4 L2 - D² = 0
L² - H L - D² / 4 = 0
let's solve the quadratic equation
L = [H ± √ (H2-D2)] / 2
we assume that H> D
L = ½ H [1 + - RA (1 - (D / H) 2)]
The two values of La give the range of values for which the two speeds are equal
A) The person lands in the moat if the rope's length is very short because :
The speed of the platform is less than the required minimum speedB) The person lands in the moat if the rope length is similar to the height of the platform because :
The speed required to cross the moat approaches infinityFollowing the assumptions;
size of the person is much smaller than L and H
D = horizontal distance
The conditions that will cause the person to land on the moatThe person will land in the moat when the rope's length is very short because as the rope reduces in length the speed reduces as well such that the speed of the platform goes below the required minimum speed which will enable the person cross over. while As the magnitude of the length tends towards the same magnitude of the height the speed required to cross the moat increases towards infinity and this speed cannot be attained by the person hence he will land in the moat.Hence we can conclude that The person lands in the moat if the rope's length is very short because The speed of the platform is less than the required minimum speed and The person lands in the moat if the rope length is similar to the height of the platform because,the speed required to cross the moat approaches infinity.
Learn more about obstacle course : https://brainly.com/question/241926
Related Questions
The light bulbs are identical. Initially both bulbs are glowing. What happens when the switch is closed
Answers
Answer:
They turn off
Explanation:
1. A hot air balloon weighing 30 N is tied to the ground by a string to prevent
from floating off the ground. The volume of the balloon is 20 m and the
density of air is 1.3 kgm ?. Find:
a. upthrust acting on the balloon. Take g = 10 ms 2.
b. force exerted by the rope on the balloon?
Answers
Answer:
a) FB = 260 [N]
b) FT = 230 [N]
Explanation:
In order to solve this problem we must use a static analysis, since Globe does not move. For a better understanding in solving this problem, a free body diagram with the forces acting on the globe is attached.
The buoyant force acts upward as it causes the balloon to tend to float, the weight of the balloon tends to lower the balloon and the downward tension force does not allow the balloon to float
The buoyant force is defined by the following equation:
FB = Ro*V*g
where:
FB = Buoyant force [N]
Ro = density of the air = 1.3 [kg/m^3]
V = volume of the balloon = 20 [m^3]
g = gravity acceleration = 10 [m/s^2]
FB = 1.3*20*10 = 260 [N]
Now we do a sum of forces equal to zero in the y-axis
FB - 30 - FT = 0
260 - 30 = FT
FT = 230 [N]
The speed of a car is decreasing from 35 m/s to 15 m/s in 4s
Answers
a = -20/4 = -5 m/s^2
A man walking at 3.56 m/s accelerates at 2.50 m/s2 for 9.28 s. How far does he get?
141 m
26.8 m
44.6 m
248 m
Answers
Which of these statements best describes the impact of ocean thermal power and current power on the environment?
A. Current power may decrease the fish population.
B. Current power may decrease the gravitational pull of the moon.
C. Ocean thermal power may increase the fish population.
C. Ocean thermal power may increase the gravitational pull of the moon.
Answers
Answer:
A. Current power may decrease the fish population.
Explanation:
The statement that best describes the impact of ocean thermal power and current power on the environment is that current power may decrease the fish population.
The environment is made up of living and non-living components that co-exist and interact with one another.
Harnessing current power from ocean movement will seriously affect the fish population. Most fishes are not sedentary. They move and glide through the water. When current power causes a change in the environment of the fish. This will definitely affect the normal condition prevalent in the body of water.Answer:
A
Explanation:
I took the test good luck :D
A model rocket is shot directly upward, rises to its maximum height and then returns to its launch position in 10.0 s. Assuming free fall conditions, what was the rocket's initial upward velocity?
a. 98.0 m/s
b. 123 m/s
c. 24.5 m/s
d. 49.0 m/s
Answers
d. 49.0 m/s
this is your answer. ....OK. ..
please mark me as brainliest. .....
follow me.....my friend. .....
a Venus fly trap is an......... plant.
Answers
Answer:
A Venus flytrap is a perennial carnivorous plant.
I hope it helps
plant that eats meat
a motor boat is traveling at 25 knots towards 340 degree on a river flowing at 20 knots towards 175 degrees. What is the actual speed of the boat as seen by a helicopter piolet hovering above?
Answers
Answer:
Vbx = 25 * cos 340 = 23.5 knot x-component of boats speed
Vrx = 20 cos 175 = -19.9 knot x-component of rivers speed
Vx = 3.58 knot x-component of boat and river speed
Vby = 25 sin 340 = -8.55 knot y-component of boat speed
Vry = 20 sin 175 = 1.74 knot y-component of river speed
Vy = -6.81 knot y-component of boat and river speed
V = (Vx^2 + Vb^2)^1/2 = (3.58^2 + 6.81^2)^1/2 = 7.69 knots
Grass and plants get energy from
А
the sun.
B
eating food.
с
windmills.
D
electrons.
Answers
Answer:
From the Sun
Explanation:
Plants can't eat any food. They don't ue or need windmills to get energy. They are plants so they don't have any electrons. The only way that they can recive energy from is the sun. Sometimes plants die when they don't get enough sun because they don't have any energy to live.
Two charged objects are separated by distance, d. The first charge has a larger magnitude (size) than the second charge. Which one exerts the most force?
Answers
A studious physics student is interrupted by a swarm of bees and chased off a cliff. Since she has her calculator in hand she quickly punches in numbers to figure out the initial velocity she needs to make it into the lake below. The cliff is 10 m high and the lake is 15 m away from the edge of the cliff. Find the time it takes her to drop. Find her initial velocity,
Answers
Answer:
The time is 1.4 sec
The initial velocity is 10.7 m/s.
Explanation:
Given that,
Height = 10 m
Distance = 15 m
We need to calculate the time
Using equation of motion
[tex]s=ut-\dfrac{1}{2}gt^2[/tex]
Put the value into the formula
[tex]10=0+\dfrac{1}{2}\times9.8\times t^2[/tex]
[tex]t^2=\dfrac{2\times10}{9.8}[/tex]
[tex]t=\sqrt{\dfrac{2\times10}{9.8}}[/tex]
[tex]t=1.4\ sec[/tex]
We need to calculate the initial velocity
Using formula of velocity
[tex]v=\dfrac{d}{t}[/tex]
Put the value into the formula
[tex]v=\dfrac{15}{1.4}[/tex]
[tex]v=10.7\ m/s[/tex]
Hence, The time is 1.4 sec
The initial velocity is 10.7 m/s.
A chef places an open sack of flour on a kitchen scale. The scale reading of
40 N indicates that the scale is exerting an upward force of 40 N on the sack. The magnitude of this force equals the magnitude of the force of Earth’s gravitational attraction on the sack. The chef then exerts an upward force of
10 N on the bag and the scale reading falls to 30 N.Draw a free-body diagram of the latter situation.
Answers
Answer:
Explanation:
Given
Initial reading on scale =40 N
So, we can conclude that weight of the sack is 40 N
After this a 10 N force is applied upward on the sack such that the net force becomes (40-10) N downward (because downward force is more)
This net downward force is the resultant of earth graviational pull and the applied upward force.
So, this downward force acts on the machine which inturn applies an upaward force of same magnitude called Normal reaction.
This situation can be diagramatically represented by figure given below
Answer:
40N
Explanation:
trust
Describe four ways in which improving your muscular fitness would have a positive affect in your life
Answers
Four ways in which improving our muscular fitness would have a positive affect on our lives are given below:
Injury preventionBody compositionChronic disease prevention.Lifetime muscle and bone healthMuscular fitnessMuscle fitness simply means having muscles that can lift heavier objects or muscles that will work longer before becoming exhausted.
It helps us improves when a person does activities that build or maintain muscles or that increase how long a person can use his or her muscles.
Learn more about muscular fitness:
https://brainly.com/question/2415901
50 POINTS!!! PLEASE!!!!!! Pls help me with this been stuck on it in like FOREVER!! PLSS.
Answers
Answer:
it will move in 356.5g in diagonal direction(resultant or between the both direction)
Explanation:
285+428/2=356.5g
Hope u like it
PLZ MARK ME AS BRAINLIEST
(A) Electricity and Magnetism
A). Three point charges are aligned along the x axis as shown in
Fig. Find the electric field at (a) the position (2, 0) and (b) the
position (0, 2).
Answers
electricity
Explanation:
the position (2,o
The world’s fastest car can accelerate from rest to 60 mph(27m/s) in 2.2 seconds. What is the magnitude of its acceleration?
Answers
Hi there! :)
12.27 m/s²Find the acceleration by finding the change in velocity over time:
(vf - vi) / (time) = acceleration over the interval
*Remember, an object at rest has a velocity of 0 mph, and use the correct units for speed that would result in an acceleration involving meters / seconds.*
(27 - 0) / (2.2) = 27 / 2.2 ≈ 12.27 m/s²
2. It is now 10:29 a.m., but when the bell rings at 10:30 a.m. Suzette will be late for French class for the third time this week. She must get from one side of the school to the other by hurrying down three different hallways. She runs down the first hallway, a distance of 35.0 m, at a speed of 3.50 m/s. The second hallway is filled with students, and she 4covers its 48.0 m length at a speed of 1.20 m/s. The final hallway is empty, and Suzette sprints its 60.0 m length at a speed of 5.00 m/s. How long does it take Suzette to make to class? Did Suzette beat the bell?
Answers
Answer:
62 secondsnoExplanation:
The total travel time Suzette experiences is the sum of the times in each hallway. Using
time = distance/speed
we can add the times.
(35.0 m)/(3.50 m/s) +(48.0 m)/(1.20 m/s) +(60 m)/(5.0 m/s)
= 10 s + 40 s + 12 s
= 62 s
It takes Suzette 62 seconds to get to class. She does not beat the bell.
A car takes 8 s to increase its velocity from 10 m/s to
30 m/s. What is its average acceration?
Answers
Answer:
Average acceleration is 2.5 m/s^2.
Explanation:
Average acceleration can be found by dividing the change in speed by the change in time.
We know that the initial velocity=10m/s, the final velocity=30m/s and time elapsed is t=8s.
a= (Final velocity-Initial Velocty)/t
a=(30-10)/8=20/8=2.5 m/s^2
Determine the electrical force of attraction between two balloons
that are charged with the opposite type of charge but the same
quantity of charge. The charge on the balloons is 6.0 x 10-7 C and they
are separated by a distance of 0.50 m.
Answers
Answer:
F=1.3x10^-2N
Explanation:
Fe= k(6x10^-7C)^2/(0.5)^2
Electrical force of attraction between the balloons is F=1.3x10^-2N
The electric force of attraction between two balloons should be F=1.3x10^-2N.
Calculation of the electric force;Since The charge on the balloons is 6.0 x 10-7 C and they are separated by a distance of 0.50 m.
So, here the electric force is
Fe= k(6x10^-7C)^2/(0.5)^2
F=1.3x10^-2N
hence, The electric force of attraction between two balloons should be F=1.3x10^-2N.
Learn more about force here: https://brainly.com/question/19848845
Question 16 1 pts Jessie feels pressured by his parents to get a job. This is an example of the law of?
readiness
disuse
effect
belonging
Answers
Can we cure aging? Support your answer?
Answers
Answer: yes it can
Explanation:
Answer:
Yes you can. You need to eat healthy and have the proper diet and always exercise and build muscles, this can slow down aging, and most importantly, we must always be calm. However there is no way to stop aging for that’s part of life.
Explanation:
How much would a 15.0 kg object weigh on that planet? Round the answer to the nearest whole number.
Answers
Answer:
168
Explanation:
Answer: a 15 kg object would weigh the most on Neptune
168 N
-. What is the acceleration of 4 kg trolling bag pulled by a girl with a
force of 3 N?
Answers
Answer:
Acceleration(a) = 0.75 m/s²
Explanation:
Given:
Force(F) = 3 N
Mass of thing(m) = 4 kg
Find:
Acceleration(a)
Computation:
Force(F) = ma
3 = (4)(a)
Acceleration(a) = 3/4
Acceleration(a) = 0.75 m/s²
What is the maximum torque on a 150-turn square loop of wire 18.0 cm on a side that carries a 50.9 A current in a 1.60 T field
Answers
Answer:
The maximum torque on the loop is 395.80 N.m.
Explanation:
Given;
number of turns of the wire, N = 150 turns
length of the square loop, L = 18.0 cm = 0.18 m
current in the wire, I = 50.9 A
Magnetic field, B = 1.6 T
Maximum torque on the loop is given by;
τ = NIAB
τ = (150)(50.9)(0.18²)(1.6)
τ = 395.80 N.m
Therefore, the maximum torque on the loop is 395.80 N.m.
A curve that has a radius of is banked at an angle of . If a -kg car navigates the curve at without skidding, what is the minimum coefficient of static friction between the pavement and the tires
Answers
Answer:
0.65
Explanation:
For whatever reasons, the parameters are not giving. So, I will assume by myself to make the calculations easier. You can substitute whatever it is to it from your question.
Given that
Radius of the road, r = 63 m
Speed of the car, v = 20 m/s
The relationship between a car that is passing through a curve and it's frictional force is said to be
U(s) * g = v²/r
In the formula above,
U(s) = coefficient of static friction
g = acceleration due to gravity, 9.8 m/s²
v = velocity of the car
r = radius of the road
Now when we substitute the earlier stated values, we have
U(s) * 9.8 = 20² / 63
U(s) * 9.8 = 400 / 63
U(s) * 9.8 = 6.35
U(s) = 6.35 / 9.8
U(s) = 0.65
Thus, our coefficient of static friction, based on the stated values is 0.65
21. A toy car starts from rest and begins to
accelerate at 11.0 m/s2. What is the toy car's
final velocity after 6.0 seconds?
Answers
Answer:
v = 66 m/s
Explanation:
Given that,
The initial velocity of a car, u = 0
Acceleration of the car, a = 11 m/s²
We need to find the final velocity of the toy after 6 seconds.
Let v is the final velocity. It can be calculated using first equation of motion. It is given by :
v = u +at
v = 0 + 11 m/s² × 6 s
v = 66 m/s
So, the final velocity of the car is 66 m/s.
Please help me! What is Ohm's law?
Answers
Ohm's law shows the relationship between voltage, current, and the resistance of a energy bond. The formula for Ohm's law is:
voltage = current x resistance
This formula tells you that current and resistance is the voltage of an energy bond.
Hope this helps you!
Answer: What is Ohm’s Law?
Ohm's Law is a formula used to calculate the relationship between voltage, current and resistance in an electrical circuit.
Ohm's Law (E = IR) is as fundamentally important as Einstein's Relativity equation (E = mc²) is to physicists.
E = I × R
It means voltage = current × resistance, or volts = amps × ohms, or V = A × Ω.
Resistance cannot be measured in an operating circuit, so Ohm's Law is especially useful when it needs to be calculated. Rather than shutting off the circuit to measure resistance, a technician can determine R using the above variation of Ohm's Law.
Plz mark brainliest:)
A block of mass m1 = 18.5 kg slides along a horizontal surface (with friction, μk = 0.22) a distance d = 2.3 m before striking a second block of mass m2 = 7.25 kg. The first block has an initial velocity of v = 8.25 m/s.
Assuming that block one stops after it collides with block two, what is block two's velocity after impact in m/s?
How far does block two travel, d2 in meters, before coming to rest after the collision?
Answers
Answer:
19.5 m/s
87.8 m
Explanation:
The acceleration of block one is:
∑F = ma
-m₁gμ = m₁a
a = -gμ
a = -(9.8 m/s²) (0.22)
a = -2.16 m/s²
The velocity of block one just before the collision is:
v² = v₀² + 2aΔx
v² = (8.25 m/s)² + 2 (-2.16 m/s²) (2.3 m)
v = 7.63 m/s
Momentum is conserved, so the velocity of block two just after the collision is:
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
m₁u₁ = m₂v₂
(18.5 kg) (7.63 m/s) = (7.25 kg) v
v = 19.5 m/s
The acceleration of block two is also -2.16 m/s², so the distance is:
v² = v₀² + 2aΔx
(0 m/s)² = (19.5 m/s)² + 2 (-2.16 m/s²) Δx
Δx = 87.8 m
The velocity of block 2 and the distance traveled by it prior to being at rest post-collision are 19.5 m/s and 87.8 m. Check the calculations below:
FrictionGiven that,
[tex]m_{1}[/tex] = 18.5 kg
d = 2.3m
To find,
Acceleration of block 1:
∑[tex]F = ma[/tex]
⇒ -m₁gμ = m₁a
⇒ a = -gμ
⇒ a [tex]= -(9.8 m/s^2) (0.22)[/tex]
∵ a [tex]= -2.16 m/s^2[/tex]
Now,
To determine the velocity of block one prior to the collision:
We know,
The initial velocity of block 1 = 8.25 m/s
⇒ [tex]v^2 = v_{o}^2 + 2[/tex]aΔx
⇒ [tex]v^2 = (8.25 m/s)^2 + 2 (-2.16 m/s^2) (2.3 m)[/tex]
∵ [tex]v = 7.63 m/s[/tex]
We also know,
[tex]m_{2}[/tex] = 7.25 kg
Now,
The velocity of block 2 post collision:
⇒ [tex]m_{1} u_{1} + m_{1} u_{1} = m_{1} v_{1} + m_{2} v_{2}[/tex]post-collision
Through this,
⇒ [tex](18.5 kg) (7.63 m/s) = (7.25 kg) v[/tex]
∵[tex]v = 19.5 m/s[/tex]
The distance can be found through:
⇒ [tex]v^2 = v_{o} ^{2} + 2[/tex][tex]a[/tex]Δ[tex]x[/tex]
⇒ [tex](0 m/s)^2 = (19.5 m/s)^2 + 2 (-2.16 m/s^2)[/tex]Δ[tex]x[/tex]
∵ Δ[tex]x = 87.8 m[/tex]
Thus, 19.5 m/s and 87.8 m are the correct answers.
Learn more about "Friction" here:
brainly.com/question/13357196
Open Box. Consider a hollow box with the top missing. The sides have negligible thickness and each has length L and mass m. (a) Find the x-coordinate of the center of mass.
Answers
Answer:
x_{cm} = L / 2
Explanation:
The center of mass is defined by
[tex]x_{cm}[/tex] = 1 / M ∑ m_{i} x_{i}
where M is the total mass of the system
in this case the system is continuous so, for which we use the density
ρ = dm / dx
dm = ρ dx
substituting
x_{cm} = 1 / M ∫ x ρ dx
x_{cm} = ρ / M ∫ x dx
we integrate and evaluate from x = 0 to x = L
x_{cm} = ρ / M (L² /2 -0)
we introduce the density which is constant
ρ = M / L
x_{cm} = 1 /M (M/L) L² / 2
x_{cm} = L / 2
What does the principle of superposition help scientists determine?
A) The super powers of a rock layer
B) The exact and absolute age of a rock layer
C) The relative age of a rock layer
D) The position of a fossil
Answers
Answer:
B
Explanation:
the exact and absolute age of a rock layer
Answer:
The relative age of a rock layer.
Explanation:
The answer is C.