A car moving with a velocity of 30 ms-1 is stopped by the application of brakes which imparts a radiation of 6 ms-2 to the car.
1. how long does it take for the car to come to stop
2. how far does the car travel during the time the brakes are applied
somebody please help me solve this and do explain..​

Answer:

i = 0.483 A

Explanation:

B = [tex]\frac{U.i}{2pi*r}[/tex]

So, here the r is 0.225 m

The Magnetic field is 4.29 x [tex]10^{-7}[/tex] t

U. = 4π x [tex]10^{-7}[/tex] x i

4.29 x [tex]10^{-7}[/tex] = (4π x [tex]10^{-7}[/tex] x i) / (2π * 0.225)

Cutting  [tex]10^{-7}[/tex]

4.29 = [tex]\frac{4π * i}{2π * 0.225}[/tex]

4π and 2π canceled, left with 2

4.29 = [tex]\frac{2i}{0.225}[/tex]

4.29*0.225 = 2i

0.96525 = 2i

i = [tex]\frac{0.96525}{2}[/tex]

i = 0.482625 A

Rounding to 3 digits after decimal, we get

∴ i = 0.483 A

The magnitude of the electric field inside the conductor will be 0.208 N/C.

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

Given data;

length of rod = 25 cm = 0.25 m

Potential Difference = 52 mV = 0.052 Volts

The electric field is found as the ratio of the potential difference and the length;

[tex]\rm E =\frac{0.052}{0.25} \\\\ E=0.208 \ N/C[/tex]

Hence,the magnitude of the electric field inside the conductor will be 0.208 N/C.

To learn more about the electric field refer to the link;

https://brainly.com/question/26690770

#SPJ1

Answer:

Approximately [tex]21.6\; {\rm m\cdot s^{-1}}[/tex], assuming that the coefficient of kinetic friction between the tires and the ground stays the same.

Explanation:

Let [tex]\mu_{k}[/tex] denote the coefficient of kinetic friction between the tires and the ground.

Let [tex]m[/tex] denote the mass of the truck. Let [tex]g[/tex] denote the gravitational field strength. The weight of this truck would be [tex]m\, g[/tex]. Since the curve is flat, the magnitude of the normal force [tex]F_\text{normal}[/tex] between the truck and the ground would also be [tex]m\, g\![/tex].

Let [tex]v = 32.5\; {\rm m\cdot s^{-1}}[/tex] denote the speed at which the truck goes around the curve with a radius of [tex]150\; {\rm m}[/tex]. The (horizontal) centripetal acceleration of the truck would be:

[tex]\displaystyle a = \frac{v^{2}}{r}[/tex].

The horizontal net force on the truck (of mass [tex]m[/tex]) would need to be exactly:

[tex]\displaystyle F_\text{net} = m\, a = \frac{m\, v^{2}}{r}[/tex].

The friction between the tires of the truck and the ground is the only horizontal force on the truck. Thus, this friction would need to supply the entirety of this horizontal net force:

[tex]\displaystyle F_\text{friction} = F_\text{net} = \frac{m\, v^{2}}{r}[/tex].

Notice that increasing [tex]v[/tex] would require an increase in the kinetic friction between the truck, [tex]F_\text{friction}[/tex]. However, since [tex]F_\text{friction}\![/tex] is at most [tex]\mu_{k}\, F_\text{normal}[/tex] (which is equal to [tex]\mu_{k}\, m\, g[/tex]):

[tex]\begin{aligned}\frac{m\, v^{2}}{r} &= F_\text{friction} \\ & \le \mu_{k}\, F_\text{normal} \\ &= \mu_{k}\, m\, g\end{aligned}[/tex].

Therefore, when the radius of the curve is [tex]r^{\prime}[/tex], the maximum velocity of this truck would be:

[tex]\begin{aligned}v^{\prime} &= \sqrt{\mu_{k}\, g\, r^{\prime}}\end{aligned}[/tex].

Likewise, it is possible to express [tex]\mu_{k}[/tex] in terms of [tex]r[/tex], [tex]g[/tex], and max speed [tex]v[/tex]:

[tex]\displaystyle \mu_{k} = \frac{v^{2}}{r\, g}[/tex].

Substitute this expression for [tex]\mu_{k}[/tex] back into the expression for [tex]v^{\prime}[/tex]:

[tex]\begin{aligned}v^{\prime} &= \sqrt{\mu_{k}\, g\, r^{\prime}} \\ &= \sqrt{\frac{v^{2}}{r\, g}\, g\, r^{\prime}} \\ &= \sqrt{v^{2}\, \frac{r^{\prime}}{r}}\end{aligned}[/tex].

Given that [tex]v = 32.5\; {\rm m\cdot s^{-1}}[/tex], [tex]r = 150\; {\rm m}[/tex], and [tex]r^{\prime} = 66.0\; {\rm m}[/tex]:

[tex]\begin{aligned}v^{\prime} &= \sqrt{v^{2}\, \frac{r^{\prime}}{r}} \\ &= \sqrt{(32.5\; {\rm m\cdot s^{-1}})^{2} \times \frac{66.0\; {\rm m}}{150\; {\rm m}}} \\ &\approx 21.6\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Answer:

an instrument for measuring the density of liquids.

Explanation:

Based on the calculations, the radius of this cone is equal to 4 inches.

Mathematically, the volume of a cone is calculated by using this formula:

V = 1/3 × r²h

Where:

Making r the subject of formula, we have:

r = √(3V/πh)

Substituting the given parameters into the formula, we have;

r = √(3 × 96π/π × 18)

r = √(288/18)

r = √16

Radius, r = 4 inches.

Read more on radius here: https://brainly.com/question/10584345

#SPJ4

a is the correct answer

Explanation:

no.of proton defines atomic number in an atom

Answer: a

Explanation:

An atomic number is the number of protons found in the nucleus. The number of protons is equal to the number of electrons. The atomic mass the atomic number add the amount of neutrons.

Answer:

Continental polar.

Explanation:

it should be a continental polar air mass because, it is cold.

Charging by rubbing needs physical contact, and charging by sharing does not need any contact.

When the matter is put in an electromagnetic field, it has an electric charge, which causes it to experience a force. Similar charges repel each other, whereas dissimilar charges attract each other.

An electrical charge is created when two distinct insulating materials are rubbed together.

Charge sharing is a signal degradation phenomenon that occurs when charges are transferred from one electronic domain to another.

Electrostatics is the phenomenon of charging by rubbing, whereas induction is the phenomenon of charging by sharing.

Hence, charging by rubbing needs physical contact, and charging by sharing does not need any contact.

​

To learn more about the charge refer to the link;

https://brainly.com/question/24391667

#SPJ1

Answer: True

Explanation:

A scalar quantity is those quantities that only have magnitude and no direction. Therefore the value doesn't change with direction.

Answer:

V = f λ     speed of wave in terms of frequency and wavelength

t = S / V      time for wave to travel a distance S

t = 91.4 m / 344.5 m/s = .265 sec        time to travel 91.4 m

(a) The mass of the car is 1,795.92 kg

(b) The initial momentum of the car is 44,897.96 kgm/s.

(c) the change in momentum for the car is 44,897.96 kgm/s..

(d) The time it takes the braking force to bring the car to rest is 69.4 s.

The mass of the car is calculated as follows;

W = mg

m = W/g

m = (17,600)/9.8

m = 1,795.92 kg

Pi = mvi

Pi = 1,795.92 x 25

Pi = 44,897.96 kgm/s

ΔP = Pf - Pi

ΔP = 0(1,795.92) - 44,897.96 kgm/s

ΔP =  - 44,897.96 kgm/s

F = ma

-650 = 1,795.92(a)

a = -650/1,795.92

a = -0.36 m/s²

v = u + at

0 = 25 - 0.36t

0.36t = 25

t = 69.4 s

Learn more about momentum here: https://brainly.com/question/7538238

#SPJ1

Answer:

5730 yr

Explanation:

25  = 100 (1/2)^11460/x       where x = half life

.25 = (1/2)^11460/x

log .25 / log.5   = 11460/x

x = 5730 yr

Answer:

The object obeys the equation

F = M a     on both the earth and the moon (mass does not depend on location)

The problem is a little misleading because if an object has a mass of

10 kg then its weight is 10 kg * 9.8 m/s^2 = 98 Newtons

That means that weight is not expressed in Kg but rather in Newtons

Newton's Law is true on the moon as it is on the earth and F = M a

An object that weighed 10 N on earth would weigh 10 / 6 = 1.67 N on the moon

One must take care in describing a force in units of Newtons not in Kg

The evidence that supports continental drift and plate tectonics includes different fossils, the same rocks and the shapes of continents that fit together.

Continental drift is a theory that states continents once were part of one big landmass known as Pangea.

Nowadays, the theory of continental drift proposed by Alfred Wegener has been replaced by plate tectonics.

In conclusion, the evidence that supports continental drift and plate tectonics includes fossils, the same rocks and the shapes of continents that fit together.

Learn more on the continental drift here:

https://brainly.com/question/394265

#SPJ1

The characteristic of waves that remains unchanged when it enters a distinct medium is the frequency (Option B).

The expression 'wave frequency' indicates the period of time or occurrence of a particular type of wave.

In conclusion, the characteristic of waves that remains unchanged when it enters a distinct medium is the frequency (Option B).

Learn more about wave frequency here:

https://brainly.com/question/3148541

#SPJ4

Answer: B. frequency

Explanation: plato answer :)

Answer:

By ADDING the forces

Explanation:

Answer:

E = V Q        voltage * charge

Since the charge on an electron is      e = 1.6E-19    coulombs

the energy of 1 eV is 1.6E-19 joules

E = 2.88E-18 joules / 1.6E-19 joules/electron volt

E = 18 eV

[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]

According to first law of reflection, we know that :

Angle made by the incident ray and normal [ i.e angle of incidence ] is always equal to Angle made by the reflected ray and normal [ i.e Angle of reflection ]

Therefore, we can say that the missing angle (angle of reflection) has the same value as the angle of incidence which is equal to 45°

Please read the statement through to understand the procedure ~

All the following are momentum oscillators except Advance/Decline Line.

Momentum oscillators measure the amount that a security's price has changed over a given period of time.

Thus, all the following are momentum oscillators except Advance/Decline Line.

Learn more about momentum oscillators here: https://brainly.com/question/13504964

#SPJ4

Answer:

You would need to be 33 feet deep.

Explanation:

Net force

As it's negative the box will move left

Answer:

Texture is how something feels.

Answer:

Earth rotates eastward, in prograde motion. As viewed from the north pole star Polaris, Earth turns counterclockwise.

The time it takes Earth to rotate so the sun appears in the same position in the sky, known as a solar day, is 24 hours. However, the time it takes Earth to complete one full rotation on its axis with respect to distant stars is actually 23 hours 56 minutes 4.091 seconds, known as a sidereal day.

Earth's axis is an imaginary pole going right through the center of Earth from "top" to "bottom." Earth spins around this pole, making one complete turn each day. That is why we have day and night, and why every part of Earth's surface gets some of each. Earth has seasons because its axis doesn't stand up straight.

Earth and sun are part of the solar system, with the sun at its centre. An Earth day is 24 hours because the Earth spins on its axis once every 24 hours. At any one time half of the Earth's sphere is in sunlight (day) while the other half is in darkness (night).

The Earth's axis runs from the North Pole to the South Pole. It takes the Earth 24 hours, or one day, to make one complete rotation around this invisible line. As the Earth rotates, each area of its surface gets a turn to face and be warmed by the sun. This is important to all life on Earth

Answer:

The momentum will quadruple

Explanation:

Original momentum

momen = mv

now increase both

 momen = 2m * 2v = 4 mv  <====== the momentum has quadrupled

The acceleration of the truck is 45.5 m/s² and the velocity of the truck is 27.8 m/s.

The acceleration of the truck is calculated as follows;

F = ma

a = F/m

a = (2.685 x 10⁵)/(5900)

a = 45.5 m/s²

a = v²/r

v² = ar

v² = 45.5 x 17

v² = 773.64

v = 27.8 m/s

Learn more about acceleration here: https://brainly.com/question/14344386

#SPJ1

The simplest compound of hydrocarbon is methane

The electron structure attached

Answer: Acceleration =3m/s^2

Explanation:

Plasma osmolarity increases when you give a severely dehydrated person large amounts of pure water.

The electrolyte–water balance of the body is measured by plasma osmolality. This amount can be determined in a variety of ways, including measurement and computation.

Osmolality and osmolarity are two separate measurements that are used interchangeably in everyday situations.

When you are dehydrated, osmolality rises, and when you have too much fluid in your blood, it drops.

The way your body regulates osmolality is unique. When your body's osmolality rises, your body produces antidiuretic hormone.

Hence,plasma osmolarity increases when you give a severely dehydrated person large amounts of pure water.

To learn more about the plasma osmolarity refer:

https://brainly.com/question/16045788

#SPJ1