A boat sails along the shore. To an observer, the boat appears to move at a speed of 11 m/s, and a man on the boat walking forward appears to have a speed of 12.4 m/s. How long does it take the man to move 6 m relative to the boat? A. 0.48 s B. 4.29 s C. 0.55 s D. 1.5 s

Answers

Answer 1

Answer:

B. 4.29s

Explanation:

If the man appears to move 12.4m/s when the boat appears to move 11m/s, it means that the man moves 1.4m on the boat (12.4-11=1.4). So if the man moves 1.4m per second then it will take him 6/1.4=4.29s to move 6 m relative to the boat.

Hope this helped!


Related Questions

Which characteristic is shared by extrusions, intrusions, and faults?
O
All are cracks.
All are igneous rocks.
O All cause gaps in the geologic record.
All are younger than surrounding rocks.

Answers

Answer:D

Explanation:

The characteristic shared by extrusions, intrusions, and faults is  all are younger than surrounding rocks.

The correct option is fourth.

What is extrusion?

Extrusion is a process of extruding.

Intrusion is the process of intruding. The forced entry of molten rock or magma into two different rock formations. It is also the intruded magma.

The movement of magma over the surface of the Earth coming out through volcano craters and cracking in the earth's crust forms igneous rock.

The characteristic shared by extrusions, intrusions, and faults is  all are younger than surrounding rocks.

The surrounding rocks are already present. After that the entry of magma occurs which forms new rock. So, in age surrounding rocks are older than the middle.

Thus, the correct option is fourth.

Learn more about extrusion.

https://brainly.com/question/1452197

#SPJ6

Which is one piece of information that astronomers use to calculate the age of the universe?

Answers

Answer:

the age of the oldest stars patterns of background radiation how fast distant galaxies are moving away from us

Explanation:

According to the NASA, astronomers can estimate how old the universe is by comparing the age of the oldest stars and the rate of expansion of the universe. The rate of expansion of the universe is based on the Big Bang theory and it states that our universe is continuously expanding since it first developed. Astronomers measure Cosmic Microwave Background radiation resulting from the Big Bang.

Answer:

Patterns of background radiation

Explanation: well astronomy states that they are able to tell by the radiation gaps

differences differences between gravity and acceleration due to gravity​

Answers

Look at this table. Accleration of gravity means gravitational constant.

Write a explanation explaining why red is a beautiful color is not a hypothesis

Answers

Answer:

Please find the explanation below

Explanation:

A hypothesis in science is a testable explanation that is yet to be tested via experimentation. It is a predictive statement or suggested solution to an observation. A hypothesis aims at finding a possible explanation/answer to a question, which is subject to testing. One important aspect of formulating a hypothesis is that it tends to connect the independent variable with the dependent/measurable variable.

The statement "RED IS A BEAUTIFUL COLOR" cannot be considered a hypothesis because it does not aim to answer a question that can undergo experimental testing. This statement can not be measured via experimentation. The statement is not a possible answer to a question but rather a personal opinion about something.

describe the motion of an object has an acceleration of 0 m/s2

Answers

Answer:

The object is either traveling at a constant speed or is not moving.

Explanation:

It is not possible for the position of an object to be changing and the acceleration to be zero. Acceleration is the change in velocity divided by the change in time.

There are only two possible situations if the motion of an object has an acceleration of 0 m/s²,

Either the object is at rest or the object is moving at a uniform velocity

What is acceleration?

The rate of change of the velocity with respect to time is known as the acceleration of the object. Generally, the unit of acceleration is considered as meter/seconds².

As we know the rate of change of velocity is known as acceleration

acceleration =change in velocity/change in time

As given in the problem statement the motion of an object has an acceleration of 0 m/s²

Considering that every moving particle has zero overall acceleration. The particle will then experience zero overall applied force.

Newton's first law states that if all forces acting on a moving object are equal to zero, the object will be traveling in a straight line at a constant speed.

When there is no acceleration, the particle's motion will continue in the same direction. Additionally, the particle's velocity will not remain constant if the direction of motion changes.

Thus, If an object's motion has an acceleration of 0 m/s², there are only two possible outcomes: either the object is at rest or it is moving at a constant speed.

Learn more about acceleration from here

brainly.com/question/2303856

#SPJ2

what is the dot product and cross product of of two vectors if the angle is between them is 90 degree?​

Answers

[tex]\sf{\pink{\underline{\underline{\blue{GIVEN:-}}}}}[/tex]

The angle between the two vectors is 90° .

[tex]\sf{\pink{\underline{\underline{\blue{TO\: FIND:-}}}}}[/tex]

The dot product of two vectors .The cross product of two vectors .

[tex]\sf{\pink{\underline{\underline{\blue{SOLUTION:-}}}}}[/tex]

⚡ Let [tex]\rm{\vec{a}}[/tex] and [tex]\rm{\vec{b}}[/tex] are the two vectors .

✍️ We have know that,

[tex]\orange\bigstar\:\rm{\pink{\boxed{\green{\vec{a}\:.\:\vec{b}\:=\:ab\cos{\theta}\:}}}}[/tex]

Where,

θ = 90°

[tex]\rm{\implies\:\vec{a}\:.\:\vec{b}\:=\:ab\cos{90^{\degree}}\:}[/tex]

cos 90° = 0

[tex]\rm{\implies\:\vec{a}\:.\:\vec{b}\:=\:ab\times{0}\:}[/tex]

[tex]\rm{\implies\:\vec{a}\:.\:\vec{b}\:=\:0\:}[/tex]

[tex]\rm{\red{\therefore}}[/tex] [1] The dot product of two vectors is “ 0 ” .

✍️ We have know that,

[tex]\orange\bigstar\:\rm{\pink{\boxed{\green{\vec{a}\:\times\:\vec{b}\:=\:ab\sin{\theta}\:}}}}[/tex]

Where,

θ = 90°

[tex]\rm{\implies\:\vec{a}\:\times\:\vec{b}\:=\:ab\sin{90^{\degree}}\:}[/tex]

sin 90° = 1

[tex]\rm{\implies\:\vec{a}\:\times\:\vec{b}\:=\:ab\times{1}\:}[/tex]

[tex]\rm{\implies\:\vec{a}\:\times\:\vec{b}\:=\:ab\:}[/tex]

[tex]\rm{\red{\therefore}}[/tex] [2] The cross product of two vectors is “ ab ” .

the dot and cross product will become zero if the angle becomes 90°

hope it helps you...

#from india ✌✌✌

Which are characteristics of refraction

Answers

Answer:

When light travels from one medium to another, the frequency of light does not change. However, the velocity and wavelength change.

Explanation:

Pls mark me as brainliest

which formula gives the value of velocity ratio of wheel and axle?​

Answers

Answer:

measurement of force amplification

A long distance runner sees the finish line and accelerates at a rate in 1.2 m/s2 for
the last 3 seconds to win the race. If he was initially running at speed of 3.2 m/s,
how far did he travel?

Answers

Answer: he did travel 15 meters.

Explanation:

We have the data:

Acceleration = a = 1.2 m/s^2

Time lapes = 3 seconds

Initial speed = 3.2 m/s.

Then we start writing the acceleration:

a(t) = 1.2 m/s^2

now for the velocity, we integrate over time:

v(t) = (1.2 m/s^2)*t + v0

with v0 = 3.2 m/s

v(t) = (1.2 m/s^2)*t + 3.2 m/s

For the position, we integrate again.

p(t) = (1/2)*(1.2 m/s^2)*t^2 + 3.2m/s*t + p0

Because we want to know the displacementin those 3 seconds ( p(3s) - p(0s)) we can use p0 = 0m

Then the displacement at t = 3s will be equal to p(3s).

p(3s) = (1/2)*(1.2 m/s^2)*(3s)^2 + 3.2m/s*3s = 15m

Neglecting air resistance, which of the following statements is true regarding an object in freefall?Lector inmersivo A. An object’s acceleration increases at a constant rate. B. An object maintains a constant velocity. C. An object falls an equal distance in between each second. D. An object’s velocity and acceleration both increase at a constant rate. E. An object’s velocity changes at a constant rate, and its acceleration remains constant.

Answers

Answer:

E. An object’s velocity changes at a constant rate, and its acceleration remains constant.

Explanation:

When an object is in freefall, it implies that the object is falling freely under gravity. If it falls towards the earth surface, the fall is in the direction of the Earth's gravitational force.

At the point of release of the object, its initial velocity is zero because it is at rest. But when released, its velocity increases at a constant rate until it is acted upon by an external force. But its acceleration remains constant, acceleration due to gravity.

Jennifer, who has a mass of 50.0 kg, is riding at 35.0 m/s in her red sports car when she must suddenly slam on the brakes to avoid hitting a deer crossing the road. She strikes the air bag, that brings her body to a stop in 0.500 s. What average force does the seat belt exert on her

Answers

Answer:

Average force = 3.5 kN

Explanation:

Given:

Mass of Jennifer (m) = 50 kg

Initial velocity = 35 m/s

Time taken to stop body = 0.5 s

Find:

Average force

Computation:

v = u + at

0 = 35 + a(0.5)

Acceleration (a) =  - 70 m/s² = 70 m/s²

Average force = ma

Average force = (50(70)

Average force = 3500 N

Average force = 3.5 kN

In terms of matter and resources, Earth is essentially a(n) ________ system ; in terms of energy, Earth is a(n) ________ system.

Answers

Answer:

b

Explanation:

two teams are playing tug of war. Team A pulls to the right with a force of 450 N. Team B pulls to the left with a force of 415 N

Answers

Answer:

team A - team B = 450 N - 415 N

                                               = 35 N

Explanation:

net force on the rope is 35 N and the direction is towards A.since the two teams are pulling away from each other with the given forces, the net force can be calculated by subtracting the forces.

The net force on the rope is 35N in right direction

What is Net Force? The net force is the vector sum of forces acting on an object,How to calculate the Net force?The force applied by Team A is 450N to the right (Given)The force applied by Team B is 415 N to the left (Given)We need to find the Net force applied on the rope and the direction

As We know that ,

[tex]F_{net} = F_1+F_2[/tex]

Now as The direction of the Team A is right so the Force applied will be positive, that is 450N

Simultaneously , The direction of Team B is left so the Force applied will be negative , that is -415N

Here,

F1 = 450N

F2 = -415N

[tex]F_{net} = F_1+F_2[/tex]

= 450+ (-415N)

= 450-415

=35N

Hence the net force applied is 35N and as the net force is positive the direction will be right

Learn more about Net force here

https://brainly.com/question/11556949

#SPJ2

what oversimplified assumption does the graph make about number of types of products the society produces?

Answers

Answer:

CAN'T UNDERSTAND YOUR QUERY

Explanation:

What is your qurey. plz explain properly.

6
Question 2 (1 poin)
A rocket traveling at 39.09 m/s is accelerated uniformly to 99.03 m/s over a 22.82 s
interval. What is its displacement during this time

Answers

Answer: a

Explanation:

Which of the following is an example of technology influencing science?
A.Use of recording devices to view the growth of plants.
B.Use of X-ray machines for airport security.
C.Invention of the microscope to observe cells.
D.Invention of the thermometer to measure heat.

Answers

Answer:A and C

Explanation:

Answer:

a

Explanation:

If multiple measurements are taken and they vary quite a bit from each other, the measurements are

Answers

Answer:

precise

Explanation:

usatestprep

The degree of agreement between two or more measurements is what is referred to as a substance's precision. Your measurement is incredibly exact, but not necessarily correct if you weigh the same substance five times and obtain 3.2 kg each time.

What precision vary quite a bit from each other?

The level of agreement between measurements of the same thing is known as precision. Accuracy is not necessary for precision. In other words, it is possible to be accurate without being exact, as well as to be highly precise but not particularly accurate.

As was mentioned before, you can be extremely exact but inaccurate. You can also be precise while being inaccurate. For instance, you have accuracy without precision if, on average, your measurements for a specific substance are close to the known value, but the measurements are far apart.

Therefore, The standard deviation, or the amount and frequency of measurement variation, is what determines precision. A high standard deviation indicates low precision, according to the metric.

Learn more about precision here:

https://brainly.com/question/28336863

#SPJ2

Marissa is an extremely curious sixth grader. During a snow day she looked out her window and saw a truck spreading something all over the road. After the truck went past Marissa's house, she had a snack, put on her snow boots, hat, coat and gloves and went outside to play. She walked over to the edge of her driveway and observed salt all over the roadway, but not the sidewalks or her driveway. She also observed some of the snow and ice had melted off the roadway but not her driveway or sidewalks. She wondered if the ice and snow melting was due to the salt?

Answers

Answer:yes

Explanation:

ice melter because it causes freezing point depression.This means that salt helps in lowering the freezing point.


A 300 g walking stick is placed on a pivot and balanced by a 100 g mass, as shown in
Figure 5.20. Calculate the distance of the centre of gravity of the stick from the pivot.​

Answers

Answer:

Purplemath

The first term in the binomial is "x2", the second term in "3", and the power n is 6, so, counting ... x12 + 18x10 + 135x8 + 540x6 + 1215x4 + 1458x2 + 729 ... So memorize the Theorem and get the easy points.

Answer:

the distance of the center of gravity of the stick from

Δ = 5 cm to make it equilibrium or balance.

Explanation:

         100 g

______Π___________________________________)

             |<--- 15-----Δ--- x--->|

weight of stick (w) = 300 g acting on center with x distance from support Δ.

to get the x distance to make stick and a block balance, take moment from support.

ΣM at Δ = 0

0 = 100 (15) - 300(x)

0 = 1500 - 300x

300x = 1500

x = 1500 / 300

x = 5

therefore, the distance of the center of gravity of the stick from Δ = 5 cm

                  to make it equilibrium or balance.

Must be 8 letters (Dimensional Analysis escape room)

Answers

Answer: A-B-C-E-G-K-H-I

Explanation:

Ok, we start at A.

16 pints = x gallons.

We know that:

1 pint = 0.125 al

then:

16pint = 16*(0.125gal) = 2 gal.

The second letter is B.

Now we have:

12,320 yd = X mi

And we know that:

1 mi = 1760 yd.

Then 12,320yd = (12,320/1760) mi = 7mi

the letter is C.

Now we have:

432 cups = X gals

and:

1 cup = 0.0625 gal

then 432 cups = 432*(0.0625 gal) = 27 gal.

The next letter is E.

Now we have:

1/4 ton = X pounds.

And 1 ton = 2000 pounds

then 1/4 ton = (1/4)*2000 pounds = 500 pounds

The next letter is G.

Now we have:

3.5 gal = X ounces.

and we know that:

1 gal = 128 oz

Then:

3.5 gal = 3.5*(128oz) = 448oz

The next letter is K.

Now we have:

1/2 day = x minutes.

and we know that:

1 day = 24*60 min = 1440 min

then 1/2 day = (1/2)*1440 min = 720 min.

The next letter is H.

Now we have:

360 in = x yd

And we know that:

1yd = 36 inches.

then 360 in = (360/36) = 10 yd.

The next letter is I

Now we have:

56 cups = x quarts.

and we know that;

1cup = 0.25 quart

then: 56 cups = 56*0.25 quart = 14

So here this ends.

Then the code is:

A-B-C-E-G-K-H-I

How many nanoCoulombs are there in a milliCoulomb

Answers

Answer:

1 millicoulomb = 1000000 nanocoulombs.

Explanation:

The SI unit for electric charge is Coulomb.

1 coulomb = 1000000000 nC (nanocoulombs)

1 coulomb = 1000 mC (millicoulombs)

katie measured the distance her friend morgan ran on a straight track every 2s. her measurements are recorded in the table below. what was morgan’s average speed? what was her acceleration for the entire trip?

Answers

Answer:

The average speed of her is 2 m/s.

The acceleration for the entire trip is 0.2 m/s²

Explanation:

Given that,

katie measured the distance her friend morgan ran on a straight track every 2s.

According to given chart,

We need to calculate the average speed

Using formula of average speed

[tex]v_{avg}=\dfrac{D}{T}[/tex]

Where, D = total distance

T = total time

Put the value into the formula

[tex]v_{avg}=\dfrac{20}{10}[/tex]

[tex]v_{avg}=2\ m/s[/tex]

We need to calculate the acceleration for the entire trip

Using equation of motion

[tex]v=u+at[/tex]

[tex]2=0+a\times10[/tex]

[tex]a=\dfrac{2}{10}[/tex]

[tex]a=0.2\ m/s^2[/tex]

Hence, The average speed of her is 2 m/s.

The acceleration for the entire trip is 0.2 m/s²

It takes a person 22 seconds to swim in a straight line from the south end of the pool to the north end of the pool a distance of 28 meters. What is the swimmers velocity? A. 0.8 m/s south b. 1.3 m/s north C. 1.3 m/s north D. 0.8 me north

Answers

Answer:1.3 m/s north

Explanation:

just did it on apex

Mad scientists looked at the growth of claw size in mutant lobsters due to drinking different amounts of seawater contaminated with Pepsi. Independent Variable: Dependent Variable: Controlled Variable:

Answers

Answer:

Dependent Variable: growth of claw size in mutant lobsters

Independent variable: different amounts of seawater contaminated with Pepsi

Controlled variable: Mutant Lobsters

Explanation:

A dependent variable is one that depends on another factor to get it's result.

An independent variable is one that doesn't rely on another factor/variable to derive it's result.

A controlled variable is one which is constant and remains unchanged throughout the course of the experiment/investigation. Which means it verifies the behavior between the dependent and independent variables.

Now, in the question, the growth of claw size in the mutant lobsters depends on the different amounts of seawater contaminated with Pepsi.

Thus growth of claw size in mutant lobsters is a dependent variable while different amounts of seawater contaminated with Pepsi is an independent variable.

The mutant lobsters would be used throughout the investigation to know the relationship between the dependent and independent variable and wouldn't be changed. Thus, they are controlled variable.

8. Do you need to show your work on ANY problem that requires a calculation to receive full credit?
Yes
No

Answers

Answer:

Yes

Explanation:

Which of the following is true of the structures labeled A in the cell membrane?
Choose 1 answer:
(Choice A) A They are membrane proteins.

(Choice B) B They are entirely hydrophobic.

(Choice C) C They are phospholipids.

(Choice D) D They are carbohydrates.

Answers

Answer: a, they are membrane proteins

Explanation:

Awnser A is the correct awnser

Describe the abiotic factors that are essential for your organism to survive

Answers

Answer:

Abiotic factors include water, sunlight, oxygen, soil and temperature. Water (H²0) is a very important abiotic factor - it is often said that "water is life." All living organisms need water. Plants must have water to grow.... Without the sun, plants could not live, and without plants, animals could not live!

Explanation:

*Hope this helps*

Abiotic factors include water, sunlight, oxygen, soil and temperature. Water (H2O) is a very important abiotic factor – it is often said that “water is life.” All living organisms need water. Plants must have water to grow. ... Without the sun, plants could not live, and without plants, animals could not live!

The value of atmospheric pressure at sea level​

Answers

Answer:101.325 kilopascals

Explanation:

what acceleration of a 45 kg mass pushed with 15 N of force?

Answers

Explanation:

Fnet = ma.

Assume that there is no resistance acting on the mass. Therefore a = 15N / 45kg = 0.33N/kg or 0.33m/s^2.

If, as is typical, each of them breathes about 500 cm3 of air with each breath, approximately what volume of air (in cubic meters) do these astronauts breathe in a year

Answers

Answer:

a) 12614.4 m^3

b) 28.8 m

Explanation:

The complete question is

Four astronauts are in a spherical space station. (a) If, as is typical, each of them breathes about 500 cm^3 of air with each breath, approximately what volume of air (in cubic meters) do these astronauts breathe in a year? (b) What would the diameter (in meters) of the space station have to be to contain all this air?

The average breathing rate is 12 breaths per minute

there are 60 minutes x 24 hours x 365 days in a year = 525600 minutes in a year

if an average human takes 12 breath per minute, then in a year an average human take 12 x 525600 = 6307200 breath

For the four astronauts, the amount of breath = 4 x 6307200 = 25228800 breath in total.

The volume of air per breath = 500 cm^3

1 cm^3 = 10^-6 m^3

500 cm^3 = [tex]x[/tex] m^3

[tex]x[/tex] = 500 x 10^-6 = 5 x 10^-4 m^3

Therefore in a year, the volume of these astronauts breath in a year = 5 x 10^-4 x 25228800 = 12614.4 m^3

b) If the space station is spherical, the volume will be given as = [tex]\frac{4}{3} \pi r^3[/tex]

where r is the radius of the space station

This volume of the space station must be able to contain all the volume of breath produced by the astronauts which is = 12614.4 m^3

Equating, we have

12614.4 = [tex]\frac{4}{3} \pi r^3[/tex]

12614.4 = [tex]\frac{4}{3}*3.142*r^3[/tex]

12614.4 = 4.1893[tex]r^{3}[/tex]

[tex]r^{3}[/tex] = 12614.4/4.1893 = 3011.1

r = [tex]\sqrt[3]{3011.1}[/tex] = 14.4 m

diameter of the space station = 14.4 m x 2 =  28.8 m

Other Questions
Irrigation systems are generally used to deliver water toA fountainsB. swimming poolsC. lakes and riversD. trees and plantsPlease select the best answer from the choices providedABCD Find the distance between the endpoints (7,8) (4,2) A.10.8 B.2.2 C.6.7 D.14.9 What is 12.510 to the six power The propagation of fatigue cracks in various aircraft parts has been the subject of extensive study in recent years. The accompanying data consists of propagation lives (flight hours/104) to reach a given crack size in fastener holes intended for use in military aircraft (A????1Statistical Crack Propagation in Fastener Holes Under Spectrum Loading,A????1 J. Aircraft, 1983: 1028A????11032):.736 .863 .865 .913 .915 .937 .983 1.007 1.011 1.064 1.109 1.132 1.140 1.153 1.253 1.394Compute and compare the values of the sample mean and median.By how much could the largest sample observation be decreased without affecting the value of the median? H--1HLook carefully at the structural drawing for ethanol above.How many carbons (C) does an ethanol molecule have?2361HELPPPPPPPP What climate conditions led to the formation of worlds earliest known civilization what happens in romeo and juliet What are the differences among the four levels of managers in the organizational pyramid? 1). find the adjectives including the articles a,an, and the in the following sentence and the words being modified."ten girls were running for homecoming Queen."adjective: modifies:adjective: modifies: When using websites to research a topic, which domain tags indicate the most credible sources? Select threeoptions..com.edu.govunet.org 2 tons is what percent of 206 tons? What is the square root of 75 in simplest form How did the interests of the countries differ? what does edward abbey believe will happen if the dam is shut down and the reservoir is drained Simplify the following numerical expressions.Choose from the numbers in parentheses|-7| - 7 = distributive property Use the distributive property to match each expression with its equivalent expression. 15 POINTS Match each ecosystem with its location. (5 points) Group of answer choices Alpine Tundra Grassland Deciduous forest Desert Which is the least dense liquid? What does onii-San mean? Answer correct or I report. The consumer price index measures: ____________.a. The prices of a fixed basket of goods and services in the United States b. The prices of goods and services in Bolivia c. The average change in prices of a fixed basket of goods and services of urban consumers d. The change in prices of a fixed basket of goods and services around the world