a beam of light of wavelength 630 nm is incident on a slit that is 0.400 mm wide. if the distance between the slit and the screen is 1.80 m, what is the width on the screen of the central bright fringe?

The shortest stopping distance is 85.07 meters.

To calculate the stopping distance, we use the formula d = (v²) / (2μg), where d is the stopping distance, v is the initial velocity, μ is the coefficient of kinetic friction, and g is the acceleration due to gravity.

1. Convert the initial velocity to meters per second: 35.0 m/s is already in the correct unit.
2. Use the given coefficient of kinetic friction: μ = 0.72.
3. Use the acceleration due to gravity: g = 9.81 m/s².
4. Plug the values into the formula: d = (35.0²) / (2 × 0.72 × 9.81).
5. Calculate the stopping distance: d = 85.07 meters.

By locking the brakes with a coefficient of kinetic friction of 0.72 and traveling at 35.0 m/s, the shortest distance to stop the automobile is 85.07 meters.

To know more about coefficient of kinetic friction click on below link:

https://brainly.com/question/29100737#

#SPJ11

The frequency of electromagnetic radiation with a 15.0 µm wavelength is classified as infrared radiation is 2.0 x 10¹³ Hz.

To calculate the frequency of electromagnetic radiation with a 15.0 µm wavelength classified as infrared radiation, you can use the formula:

Frequency (f) = Speed of light (c) / Wavelength (λ)

The speed of light (c) is approximately 3.0 x 10⁸ meters per second (m/s). First, convert the wavelength from micrometers to meters:

15.0 µm = 15.0 x 10⁻⁶ meters

Now, plug the values into the formula:

f = (3.0 x 10⁸ m/s) / (15.0 x 10⁻⁶ m)

f ≈ 2.0 x 10¹³ Hz

Thus, the frequency of the electromagnetic radiation with a 15.0 µm wavelength classified as infrared radiation is approximately 2.0 x 10¹³ Hz.

Learn more about electromagnetic radiation: https://brainly.com/question/7596563

#SPJ11

The energy radiated each second by one square meter of a star whose temperature is 10,000 K is 5.67 x 1[tex]0^{8}[/tex]J. The correct choice is option b.

To find the energy radiated per second by one square meter of a star with a temperature of 10,000 K, we can use the Stefan-Boltzmann law. The formula for the Stefan-Boltzmann law is:

P = σ * [tex]T^{4}[/tex]

where P is the power radiated per unit area (in J/m²sec), σ is the Stefan-Boltzmann constant (5.67 x 1[tex]0^{-8}[/tex] J/m² sec [tex]K^{4}[/tex]), and T is the temperature in Kelvin (10,000 K).

Plug in the values into the formula
P = (5.67 x 1[tex]0^{-8}[/tex] J/m² sec [tex]K^{4}[/tex]) × (10,000 K[tex])^{4}[/tex]

Calculate the power radiated per unit area
P = (5.67 x 1[tex]0^{-8}[/tex] J/m² sec [tex]K^{4}[/tex]) × (1 x 1[tex]0^{16}[/tex] [tex]K^{4}[/tex])

Multiply the constant by the temperature raised to the power of 4
P = 5.67 x 1[tex]0^{8}[/tex] J/m² sec

Therefore,  5.67 x 1[tex]0^{8}[/tex] J (option b) is the energy radiated each second by one square meter of a star whose temperature is 10,000 K.

More on energy: https://brainly.com/question/14018240

#SPJ11

Answer:it is a

Explanation:because No matter whether you are talking about vibrations or waves, all of them can be characterized by the following four characteristics: amplitude, wavelength, frequency, and speed.

Answer:

A

Explanation:

These 4 are the main characteristics which you should have learned in your class. Hope it helps!

The expenditure multiplier would be 4.

The expenditure multiplier (k) is calculated as:

k = 1 / (1 - MPC)

If MPC is 0.75, then the expenditure multiplier would be:

k = 1 / (1 - 0.75) = 1 / 0.25 = 4

The charge of a particle can be measured by analyzing its interaction with electromagnetic fields. By observing the pattern of the particle's interaction, physicists can determine its charge and deduce its other properties. Particles can be classified based on their electric charge, which is a fundamental property of matter. The MPC of a particle refers to the most likely or expected value of its charge, based on observations and theoretical predictions.

The MPC is an important concept because it helps to explain the behavior of particles in various physical phenomena, such as particle collisions and decay processes. By understanding the MPC of particles, physicists can gain insights into the fundamental nature of matter and the underlying laws of physics.

To learn more about MPC visit here:

brainly.com/question/29645795

#SPJ4

The drum rotates through an angle of approximately 70.98 radians in coming to rest. To find the time it takes for the drum to come to rest, we need to use the formula:

final angular velocity = initial angular velocity + (angular acceleration x time)

In this case, the final angular velocity is 0 (since the drum comes to rest), the initial angular velocity is 19.5 rad/s, and the angular acceleration is -5.35 rad/s^2 (since the drum is slowing down).

So we have:

0 = 19.5 - 5.35t

Solving for t, we get:

t = 3.64 seconds

Therefore, it takes 3.64 seconds for the drum to come to rest.

To find the angle through which the drum rotates in coming to rest, we need to use the formula:

angular displacement = (initial angular velocity x time) + (0.5 x angular acceleration x time^2)

In this case, the initial angular velocity is 19.5 rad/s, the time is 3.64 seconds (as we just calculated), and the angular acceleration is -5.35 rad/s^2. So we have:

angular displacement = (19.5 x 3.64) + (0.5 x -5.35 x 3.64^2)

angular displacement = 70.98 radians (rounded to two decimal places)

Therefore, the drum rotates through an angle of approximately 70.98 radians in coming to rest.
(a) To find the time it takes for the drum to come to rest, we can use the formula for angular acceleration: α = (ωf - ωi) / t, where α is the angular acceleration, ωf is the final angular velocity, ωi is the initial angular velocity, and t is the time. Since the drum comes to rest, ωf = 0.

Given that the drum slows at a constant rate of 5.35 rad/s², we have α = -5.35 rad/s² (negative because it's slowing down) and ωi = 19.5 rad/s.

Plugging these values into the formula, we get:

-5.35 = (0 - 19.5) / t

Solving for t, we find that t ≈ 3.64 seconds.

(b) To find the angle through which the drum rotates, we can use the formula θ = ωi*t + 0.5*α*t².

Plugging in the values,

we get θ = 19.5 * 3.64 + 0.5 * (-5.35) * (3.64)².

Calculating this, we find that θ ≈ 35.53 radians.

So, the drum takes approximately 3.64 seconds to come to rest and rotates through an angle of about 35.53 radians in the process.

learn more about angular velocity here: brainly.com/question/25648667

#SPJ11

A) To find the speed of the cruiser relative to the pursuit ship, we need to use the relativistic velocity addition formula:

Relative speed = (v1 - v2) / (1 - (v1 * v2) / c^2)

Where v1 is the speed of the pursuit ship, v2 is the speed of the cruiser, and c is the speed of light.

Relative speed = (0.790c - 0.620c) / (1 - (0.790c * 0.620c) / c^2)

Relative speed = (0.170c) / (1 - (0.4898c^2) / c^2)

Relative speed = 0.170c / (1 - 0.4898)

Relative speed ≈ 0.333c

So, the speed of the cruiser relative to the pursuit ship is approximately 0.333c.

B) Since both the cruiser and the pursuit ship are traveling in the same direction away from Tatooine, the direction of the speed of the cruiser relative to the pursuit ship is also in the same direction as their individual speeds.

To know more about relative velocity, visit https://brainly.com/question/31037622

#SPJ11

The pressure drop in 50 feet of tube due to the kinematic viscosity effect of the oil is found to be 10.15 lbm/ft-s².

We will use the Darcy-Weisbach equation to find the pressure drop in the tube,

ΔP = f(L/D)(ρ/2)V², pressure drop is ΔP, friction factor is f, length of pipe is L, diameter of pipe is D,  fluid density is ρ, fluid velocity is V.

First, we need to calculate the fluid velocity. We are given that the oil flows at a rate of 10 gallons per hour, which is equivalent to 0.0423 ft³/s

V = Q / A

A = (π/4) * D²

V = Q / [(π/4) * D²]

V = (0.0423 ft³/s) / [(π/4) * (0.02 ft)²]

V = 1.19 ft/s

Next, we need to calculate the Reynolds number, which determines the flow regime (laminar or turbulent) and the appropriate friction factor to use,

Re = (ρ * D * V) / μ

μ = ρ * ν

μ = (57 lbm/ft³) * (0.08 x 10⁻³ ft²/s)

μ = 4.56 x 10⁻³ lbm/ft-s

Re = (57 lbm/ft³ * 0.02 ft * 1.19 ft/s) / (4.56 x 10⁻³ lbm/ft-s)

Re = 2838.6

Since the Reynolds number is less than the critical value for transition to turbulence (approximately 4000 for flow in a smooth pipe), we can assume that the flow is laminar and use the Hagen-Poiseuille equation to calculate the friction factor,

f = (64 / Re)

f = (64 / 2838.6)

f = 0.0226

Now we can use the Darcy-Weisbach equation to calculate the pressure drop,

ΔP = f * (L/D) * (ρ/2) * V²

ΔP = (0.0226) * (50 ft / 0.02 ft) * (57 lbm/ft³ / 2) * (1.19 ft/s)²

ΔP = 10.15 lbm/ft-s²

Therefore, the pressure drop in 50 feet of tube is approximately 10.15 lbm/ft-s². Note that this calculation assumes steady-state, fully developed, and incompressible flow, as well as a smooth pipe with no major fittings or changes in diameter.

To know more about Darcy-Weisbach equation, visit,

https://brainly.com/question/30640818

#SPJ4

Complete question - An oil with a kinematic viscosity of 0.08 x 10⁻³ ft²/s, viscosity of 0.00456 lbm/ft-s and a density of 57 lbm/ft³ flows through a horizontal tube 0.24 inches in diameter at the rate of 10 gallons per hour. Determine the pressure drop in 50 feet of tube.

The change in length of the aluminum vat is 0.027 m.

The change in length of the aluminum vat can be calculated as follows;

ΔL = αLΔT

Where;

the coefficient of expansion of aluminum at 20°C is 24 x 10⁻⁶/C

The change in length is calculated as;

ΔL = 24 x 10⁻⁶ x 14m x (100°C - 20 °C)

water boils at 100°C

ΔL = 0.027 m

Learn more about linear expansivity here: https://brainly.com/question/20366048

#SPJ1

Yes, it is true that any data table of real numbers has an ANOVA decomposition. ANOVA (Analysis of Variance) is a statistical method used to analyze the differences between group means in a data table.

It decomposes the total variance in the data into different components, attributing them to various sources of variation.
In a data table containing real numbers, the ANOVA decomposition typically involves the following steps:
1. Calculate the overall mean (grand mean) of the data.
2. Divide the data into groups based on the factors being analyzed.
3. Calculate the mean of each group.
4. Calculate the variation within each group (called "within-group variation") by comparing individual observations with the mean of their respective group.
5. Calculate the variation between groups (called "between-group variation") by comparing the means of different groups with the overall mean.
6. Decompose the total variance in the data into these two components: within-group variation and between-group variation.
The ANOVA decomposition allows you to test whether the differences between group means are statistically significant, which can help you determine if the factors being analyzed have a significant effect on the variable of interest.

To learn more about ANOVA click here https://brainly.com/question/23638404

#SPJ11

The energy transported across a 1.45 cm² area per hour by the EM wave is 0.00127 J/hour.

The power density of the EM wave is given by S = 1/2 * ε0 * c * E², where ε0 is the permittivity of free space, c is the speed of light, and E is the rms strength of the electric field. Plugging in the given values, we get S = 5.05 x 10⁻³ W/m².

The total power crossing the given area A = 1.45 cm² = 1.45 x 10⁻⁴ m² in one hour is P = S * A = 7.33 x 10⁻⁷ W. Converting this to energy, we get E = P * t = 0.00127 J/hour. Therefore, the energy transported across the given area per hour by the EM wave is 0.00127 J/hour.

To learn more about EM wave, here

https://brainly.com/question/18729221

#SPJ4

The energy transported across a 1.45 cm² area per hour by the EM wave is 0.00127 J/hour.

The power density of the EM wave is given by S = 1/2 * ε0 * c * E², where ε0 is the permittivity of free space, c is the speed of light, and E is the rms strength of the electric field. Plugging in the given values, we get S = 5.05 x 10⁻³ W/m².

The total power crossing the given area A = 1.45 cm² = 1.45 x 10⁻⁴ m² in one hour is P = S * A = 7.33 x 10⁻⁷ W. Converting this to energy, we get E = P * t = 0.00127 J/hour. Therefore, the energy transported across the given area per hour by the EM wave is 0.00127 J/hour.

To learn more about EM wave, here

https://brainly.com/question/18729221

#SPJ4

The relative atomic masses of the four germanium isotopes with curvature radii of 21.0, 21.6, 21.9, and 22.2 cm are roughly 1.64 u, 1.68 u, 1.70 u, and 1.72 u.

Isotopes are the same atomic number but different mass number atoms of the same element.

To solve this problem, we can use the equation for the radius of curvature of an ion in a magnetic field:

r = (mv) / (qB)

where r = radius of curvature,

m = mass of the ion

v = velocity of the ion

q = charge of the ion

B = magnetic field strength. We can assume that the charge of the germanium ions is +1 (since they are singly charged ions), and we can use the mass of the isotope with the largest radius of curvature (corresponding to an atomic mass of 76 u) to find the velocity of the ions.

m = (qrB) / v

We can substitute values,

For r = 21.0 cm:

m = (1 x 1.602 x 10^-19 C x 0.25 T x 21.0 cm) / [(2 x 1.67 x 10^-27 kg) x v]

m = 68.4 u / v

For r = 21.6 cm:

m = (1 x 1.602 x 10^-19 C x 0.25 T x 21.6 cm) / [(2 x 1.67 x 10^-27 kg) x v]

m = 70.1 u / v

For r = 21.9 cm:

m = (1 x 1.602 x 10^-19 C x 0.25 T x 21.9 cm) / [(2 x 1.67 x 10^-27 kg) x v]

m = 71.0 u / v

For r = 22.2 cm:

m = (1 x 1.602 x 10^-19 C x 0.25 T x 22.2 cm) / [(2 x 1.67 x 10^-27 kg) x v]

m = 71.8 u / v

The velocity of the ions can then be calculated using the curve with the biggest radius:

r = (mv) / (qB)

v = (qrB) / m

v = (1 x 1.602 x 10^-19 C x 0.25 T x 22.8 cm) / [(2 x 1.67 x 10^-27 kg) x 76 u]

v = 4.17 x 10^4 m/s

The atomic masses of the other isotopes can be determined by substituting this velocity back into each equation:

m21.0 = 68.4 u / 4.17 x 10^4 m/s = 1.64 u

m21.6 = 70.1 u / 4.17 x 10^4 m/s = 1.68 u

m21.9 = 71.0 u / 4.17 x 10^4 m/s = 1.70 u

m22.2 = 71.8 u / 4.17 x 10^4 m/s = 1.72 u

To know more about the isotopes visit:

https://brainly.com/question/11337817

#SPJ1

Since both cylinders contain the same gas and are at the same pressure, and cylinder A contains three times as much gas as cylinder B, they must have the same temperature. This is because of  the ideal gas law

The Ideal Gas Law states that PV = nRT,

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature.

Since the two cylinders are identical and at the same pressure, their volume and pressure are the same. Therefore, we can simplify the equation to

n1T1 = n2T2,

where n1 and n2 are the numbers of moles of gas in cylinders A and B, and T1 and T2 are their temperatures.

Given that A contains three times as much gas as B, we can say that n1 = 3n2. Substituting this into the equation, we get:

3n2T1 = n2T2

Dividing both sides by n2, we get:

3T1 = T2

This means that cylinder A has a higher temperature than cylinder B, since its temperature is three times that of cylinder B.

To know more about Ideal Gas Law visit:

https://brainly.com/question/28257995

#SPJ11

The average speed of a molecule in body A and body B will be the same. This is because the average molecular speed depends on the temperature and the type of gas, not the mass of the body.

Both bodies have the same temperature (40 degrees Celsius), so their average molecular speeds will be the same. Therefore, the correct answer is (a) the average speed of a molecule in body A and body B will be the same.

The average speed of molecules in a body depends on the temperature, not the mass of the body. Since both body A and body B have the same temperature of 40°C, the average speed of a molecule in both bodies will be the same.

Therefore, correct option is a. The average speed of a molecule in body A and body B will be the same.

To know more about speed refer here :

https://brainly.com/question/27888149

#SPJ11

there are two bodies a of mass 5 kg at 40 degrees c temperature and b of mass 50 kg at 40 °C.

a.  the average speed of a molecule in body a and body b will be same

b.  different

c. slightly different

d. none of the above

If you were looking at two stars, both at the same distance, with star A being a G5 I (a supergiant) and star B being a G5 III (a giant), the difference in appearance through a telescope would be their brightness. In this case, star A (G5 I) would be brighter, making option A the correct answer.

Both stars would appear the same brightness in a telescope because their distance is the same. However, the main difference between them is their luminosity class, with star A being a main sequence star (luminosity class I) and star B being a giant star (luminosity class III). This difference in luminosity class suggests that star B is older and has exhausted more of its fuel than star A, which is still in its main sequence phase.

Learn More about telescope here :-

https://brainly.com/question/556195

#SPJ11

The smallest value of us that ensures that the mass does not slip for any value of w is us = V3 / 2.

The maximum tangential force (Ft) at the bottom of the bowl is given by:

Ft = mg sin(60) = (mg * V3) / 2

The maximum allowable value of w is the one at which Ft = fs, which gives:

(mg * V3) / 2 = usmg

us = V3 / 2

Tangential force, also known as frictional force, is a type of force that acts parallel to the surface of an object. When two surfaces come into contact with each other, a force is generated that opposes the motion of one surface over the other. This force is known as tangential or frictional force.

Tangential force arises due to the irregularities present in the surfaces of objects that come into contact. These irregularities create interlocking points between the surfaces, resulting in a resistance to movement. The magnitude of tangential force depends on the nature of the surfaces in contact, the amount of force applied, and the coefficient of friction between the surfaces.

To learn more about Tangential force visit here:

brainly.com/question/31043143

#SPJ4

Complete Question:-

A small mass is at rest relative to the parabolic bowl, the cross- sectional shape of which is given by y V3r2. The bowl is spinning about the vertical axis at constant angular speed w as shown. If r 1/2, determine, as a function of g and us, the largest allowable w so that the mass does not slip. Hint: You can find the slope for any value of r using dy/dr. Pro Tip and Hint: Use sin 60° = 13/2 and cos 60º = 1/2.

What is the smallest value of us so that, no matter how large we make w, the mass will not slip relative to the bowl?

The smallest value of us that ensures that the mass does not slip for any value of w is us = V3 / 2.

The maximum tangential force (Ft) at the bottom of the bowl is given by:

Ft = mg sin(60) = (mg * V3) / 2

The maximum allowable value of w is the one at which Ft = fs, which gives:

(mg * V3) / 2 = usmg

us = V3 / 2

Tangential force, also known as frictional force, is a type of force that acts parallel to the surface of an object. When two surfaces come into contact with each other, a force is generated that opposes the motion of one surface over the other. This force is known as tangential or frictional force.

Tangential force arises due to the irregularities present in the surfaces of objects that come into contact. These irregularities create interlocking points between the surfaces, resulting in a resistance to movement. The magnitude of tangential force depends on the nature of the surfaces in contact, the amount of force applied, and the coefficient of friction between the surfaces.

To learn more about Tangential force visit here:

brainly.com/question/31043143

#SPJ4

Complete Question:-

A small mass is at rest relative to the parabolic bowl, the cross- sectional shape of which is given by y V3r2. The bowl is spinning about the vertical axis at constant angular speed w as shown. If r 1/2, determine, as a function of g and us, the largest allowable w so that the mass does not slip. Hint: You can find the slope for any value of r using dy/dr. Pro Tip and Hint: Use sin 60° = 13/2 and cos 60º = 1/2.

What is the smallest value of us so that, no matter how large we make w, the mass will not slip relative to the bowl?

The number of microstates in a system of three quantum oscillators with a total energy of 2hf is 10.

In quantum mechanics, the energy levels of a harmonic oscillator are quantized, meaning they can only take on certain discrete values. The energy levels of a single quantum harmonic oscillator can be given by the formula E_n = (n + 1/2)hf, where n is a non-negative integer and h is Planck's constant.

For a system of three quantum oscillators with a total energy of 2hf, we can distribute the energy among the oscillators in various ways. One way to do this is to use a technique called "stars and bars." Imagine we have 2hf stars, and we want to divide them into three groups to represent the energy of each oscillator.

We can do this by placing two bars among the stars, creating three groups of stars. For example, if we place the first bar after the first star and the second bar after the third star, we get the distribution * | ** | * *, which corresponds to the energy levels E_0, E_1, and E_0 for the three oscillators.

Using this technique, we can find that there are 10 ways to distribute 2hf energy among three oscillators. These correspond to the following sets of energy levels: {(0, 0, 2), (0, 1, 1), (0, 2, 0), (1, 0, 1), (1, 1, 0), (2, 0, 0), (0, 1, 1), (1, 0, 1), (1, 1, 0), (1, 1, 0)}. Therefore, there are 10 microstates in this situation.

To know more about number of microstates, refer here:
https://brainly.com/question/13865331#
#SPJ11

The total time taken by the sprinter is 3.73 seconds.

Let's assume that the sprinter maintains a constant speed of 10.5 m/s after reaching it.

The time taken to reach the top speed is given as 2.44 seconds.

The distance covered during the time taken to reach the top speed can be calculated using the formula:

[tex]d = (1/2)*a*t^{2}[/tex]

Assuming that the sprinter starts from rest, the initial velocity is 0 m/s. The acceleration can be calculated as:

[tex]a = (v_f-v_i)/t = (10.5m/s-0m/s)/2.44s = 4.30m/s^{2}[/tex]

Substituting the values, we get:

[tex]d = (1/2)*4.30m/s^{2} * (2.44s)^{2} = 13.5[/tex]

The time taken to cover the remaining distance at a constant speed of 10.5 m/s can be calculated using the formula:

[tex]t = d/v = 13.5/10.5 m/s = 1.29s[/tex]

Therefore, the total time taken by the sprinter is:

total time = time taken to reach top speed + time taken to cover distance at top speed

= 2.44 s + 1.29 s

= 3.73 s

To know more about speed:

https://brainly.com/question/29127452

#SPJ4

The acceleration of the masses is 4.19 m/s² and the tension in the string is 221.4 N when the masses are released.

Since the string is light and inextensible, the tension in the string will be the same throughout the length of the string.

Let's assume that the acceleration of both masses is a and that the direction of acceleration is downwards for the mass ma and upwards for the mass mb.

Using Newton's second law of motion for both masses, we can write the following equations:

ma * g - T = ma * a ...(1)

T - mb * g = mb * a ...(2)

where g is the acceleration due to gravity.

Adding both equations, we get:

ma * g - mb * g = (ma + mb) * a

Simplifying and solving for a, we get:

a = (ma - mb) * g / (ma + mb)

Substituting the given values, we get:

a = (15 kg - 28 kg) * 9.81 m/s² / (15 kg + 28 kg) = -4.19 m/s²

The negative sign indicates that the acceleration is in the opposite direction to the assumed direction of motion for mass ma.

Substituting the value of a in equation (1), we get:

T = ma * g - ma * a = ma * (g - a) = 15 kg * (9.81 m/s² + 4.19 m/s²) = 221.4 N

Therefore, the acceleration of the masses is 4.19 m/s² and the tension in the string is 221.4 N.

Learn more about Tension

brainly.com/question/15880959

#SPJ11

The amount of Doppler shift in a star is related to the mass of the planet around it. Doppler shift is a phenomenon in which the light waves emitted by a moving object are shifted towards the red or blue end of the spectrum depending on whether the object is moving away from or towards the observer respectively.

In the case of a star-planet system, the planet orbits the star, causing the star to wobble slightly due to the gravitational pull of the planet. This motion causes a shift in the star's spectral lines, which can be detected and used to infer the planet's mass.

The amount of Doppler shift is proportional to the mass of the planet, meaning that a more massive planet will cause a greater shift in the star's spectral lines. This relationship has been used extensively in exoplanet studies to measure the masses of planets beyond our solar system. By observing the Doppler shift of a star's spectral lines over time, astronomers can infer the presence of an orbiting planet and estimate its mass.

In summary, the amount of Doppler shift in a star is related to the mass of the planet around it. This relationship has been instrumental in discovering and characterizing exoplanets, and continues to be a valuable tool in the search for habitable worlds beyond our solar system.

For more such questions on Doppler shift.

https://brainly.com/question/30629988#

#SPJ11

Explanation:

6800 - 5600 = 1200 kw-hr   used

  total charge is meter charge + kw-hr charge

         = 20   + 4 (1200)  =  # 4820

(a) The potential difference across each capacitor will be 520 V and 520 V respectively, with charges of 1.53 µC and -1.53 µC.

(b) The potential difference across each capacitor will be 30 V and 30 V respectively, with charges of 88.5 nC and -88.5 nC.

(a) When the capacitors are connected in parallel with like charges, the total charge is conserved and the voltage is split equally. Therefore, the potential difference across each capacitor will be (490 V + 550 V) / 2 = 520 V.

Using the formula Q = CV, the charge on each capacitor can be calculated as Q1 = (2.95 µF) × (520 V) = 1.53 µC and Q2 = (4.00 µF) × (520 V) = -1.53 µC (since the charges are of opposite sign).

(b) When the capacitors are connected in series with opposite charges, the total charge is again conserved and the voltage is split according to the ratio of the capacitances.

Therefore, the potential difference across each capacitor will be (2.95 µF / (2.95 µF + 4.00 µF)) × (550 V - 490 V) = 30 V. Using the formula Q = CV, the charge on each capacitor can be calculated as Q1 = (2.95 µF) × (30 V) = 88.5 nC and Q2 = (4.00 µF) × (30 V) = -88.5 nC (since the charges are of opposite sign).

For more questions like Capacitor click the link below:

https://brainly.com/question/17176550

#SPJ11

The final temperature of the steam after undergoing an isentropic compression from an initial state where t1 = 120°C and p1 = 1 bar to a final state where p2 = 40 bar is 216.7°C. When steam undergoes an isentropic compression in an insulated piston-cylinder assembly, the process is adiabatic and reversible. This means that there is no heat transfer and the entropy remains constant.

In this scenario, the initial state of the steam is given by t1 = 120°C and p1 = 1 bar. The final state is given by p2 = 40 bar. Since the process is isentropic, we can assume that the entropy at the final state is equal to the entropy at the initial state.

To find the final temperature of the steam, we can use the steam tables to look up the specific volume at the initial and final states. From there, we can use the ideal gas law to calculate the final temperature.

Assuming that the steam is an ideal gas, the equation of state is given by:
pV = mRT
where p is the pressure, V is the specific volume, m is the mass, R is the gas constant, and T is the temperature.

Since the process is adiabatic, we know that Q = 0. Therefore, we can use the equation for isentropic processes:
p1V1 = p2V2
where k is the ratio of specific heats. For steam, k is approximately 1.3.

Using the steam tables, we can find that the specific volume of the steam at the initial state is V1 = 1.694 m/kg. We can also find that the specific volume of the steam at the final state is V2 = 0.025 m/kg.

Plugging these values into the equation for isentropic processes, we get:
1*1.694 = 40*0.025

Solving for the final temperature, we get:
T2 = (p2V2)/(mR) = (40*0.025)/(1*0.4615) = 216.7°C

Therefore, the final temperature of the steam after undergoing an isentropic compression from an initial state where t1 = 120°C and p1 = 1 bar to a final state where p2 = 40 bar is 216.7°C.

For more such questions on isentropic compression, visit:

brainly.com/question/14554615

#SPJ11

The final temperature of the steam after undergoing an isentropic compression from an initial state where t1 = 120°C and p1 = 1 bar to a final state where p2 = 40 bar is 216.7°C. When steam undergoes an isentropic compression in an insulated piston-cylinder assembly, the process is adiabatic and reversible. This means that there is no heat transfer and the entropy remains constant.

In this scenario, the initial state of the steam is given by t1 = 120°C and p1 = 1 bar. The final state is given by p2 = 40 bar. Since the process is isentropic, we can assume that the entropy at the final state is equal to the entropy at the initial state.

To find the final temperature of the steam, we can use the steam tables to look up the specific volume at the initial and final states. From there, we can use the ideal gas law to calculate the final temperature.

Assuming that the steam is an ideal gas, the equation of state is given by:
pV = mRT
where p is the pressure, V is the specific volume, m is the mass, R is the gas constant, and T is the temperature.

Since the process is adiabatic, we know that Q = 0. Therefore, we can use the equation for isentropic processes:
p1V1 = p2V2
where k is the ratio of specific heats. For steam, k is approximately 1.3.

Using the steam tables, we can find that the specific volume of the steam at the initial state is V1 = 1.694 m/kg. We can also find that the specific volume of the steam at the final state is V2 = 0.025 m/kg.

Plugging these values into the equation for isentropic processes, we get:
1*1.694 = 40*0.025

Solving for the final temperature, we get:
T2 = (p2V2)/(mR) = (40*0.025)/(1*0.4615) = 216.7°C

Therefore, the final temperature of the steam after undergoing an isentropic compression from an initial state where t1 = 120°C and p1 = 1 bar to a final state where p2 = 40 bar is 216.7°C.

For more such questions on isentropic compression, visit:

brainly.com/question/14554615

#SPJ11

The y-component of the initial velocity is 588.8 m/s.

We can use the equations of motion to solve this problem. Since the cannonball is fired horizontally, the initial vertical velocity is zero, and the only acceleration acting on the ball is due to gravity, which is downward and has a magnitude of 9.8 m/s².

The equation we will use is:

d = [tex]vit + 1/2at²[/tex]

where d is the horizontal distance traveled, vi is the initial velocity in the horizontal direction, a is the acceleration due to gravity (in the vertical direction), and t is the time of flight.

Since the vertical velocity is zero, we can set viy (the initial velocity in the vertical direction) equal to zero. We can also set d equal to 630 meters and t equal to 12 seconds. Solving for vix (the initial velocity in the horizontal direction), we get:

630 = vix ˣ 12

vix = 52.5 m/s

Now, we can find the time it takes for the cannonball to reach the ground by using the equation:

h = [tex]1/2gt²[/tex]

where h is the initial height of the cannonball (which we assume to be zero). Solving for t, we get:

t = [tex]sqrt(2h/g)[/tex] = [tex]sqrt(2 ˣ 0 / 9.8)[/tex] = 0 seconds

This means that the total time of flight is 12 seconds, and we can use the time and the vertical acceleration to find the initial vertical velocity, viy:

h = viyˣt + 1/2gt²

0 = viy ˣ 12 - 1/2(9.8)(12)²

viy = 588.8 m/s[tex]sqrt(2h/g)[/tex]

Learn more about initial velocity.

brainly.com/question/9365999

#SPJ11

a) The image position is 4 cm behind the lens.

b) The image height is -3 cm, which indicates an inverted image.

Object height, h_o = 1.5 cm

Object distance, d_o = -16 cm (negative as the object is in front of the lens)

Focal length, f = 24 cm

The lens equation relates the object distance (d_o), image distance (d_i), and focal length (f) as:

1/f = 1/d_o + 1/d_i

Substituting the given values, we get:

1/24 = 1/-16 + 1/d_i

Solving for d_i, we get:

d_i = 4 cm

Therefore, the image is formed 4 cm behind the lens.

b) Image height:The magnification formula relates the object height (h_o), image height (h_i), object distance (d_o), and image distance (d_i) as:

h_i / h_o = - d_i / d_o

Substituting the given values, we get:

h_i / 1.5 = -4 / -16

Solving for h_i, we get:

h_i = -3 cm

The negative sign indicates that the image is inverted.

Therefore, the image is 3 cm tall and inverted.

For more questions like Equation click the link below:

https://brainly.com/question/29657983

#SPJ11

To find the value of m in terms of M, we need to use the principle of torque equilibrium. Since the system is in static equilibrium, the net torque acting on it must be zero.

Let's consider the torque acting on each of the masses. The torque due to gravity on the mass m is m*g*R*sin(theta), where g is the acceleration due to gravity and theta is the angle between the radius vector and the vertical direction. Similarly, the torque on the mass M is M*g*R*sin(theta), and the torque on the mass 2M is 2M*g*R*sin(theta).

Now, since the wheel is in static equilibrium, the net torque acting on it must be zero. This means that the sum of the torques due to gravity on the masses must be equal to zero.

m*g*R*sin(theta) + M*g*R*sin(theta) + 2M*g*R*sin(theta) = 0

Simplifying this equation, we get:

(m + 3M)*g*R*sin(theta) = 0

Since sin(theta) cannot be zero, we have:

m + 3M = 0

Therefore, the value of m in terms of M is:

m = -3M

Note that the negative sign indicates that the mass m is located on the opposite side of the wheel compared to the masses M and 2M, which is necessary for the system to be in static equilibrium.

https://brainly.com/question/31484966

#SPJ11

(a) The initial velocity is 0 m/s.

(b) The final velocity at t=6s, is 10 m/s.

(c) The average acceleration is 1.67 m/s².

Instantaneous velocity is a measure of how fast an object is moving at a particular moment in time. It is the velocity of an object at a specific instant or point in time, and it is typically represented as a vector with both magnitude and direction.

The initial velocity = 0 m/s

The velocity of the particle at time, t = 6 seconds = displacement/time

velocity = 60 m/ 6s = 10 m/s

The average acceleration = (v₂ - v₁) / (t₂ - t₁)

average acceleration = (10 m/s - 0 m/s )/ (6 s - 0 s) = 10/6 = 1.67 m/s²

Learn more about instantaneous velocity here: https://brainly.com/question/2234298

#SPJ1

The form of the unit step response of a model depends on the system's transfer function.The steady-state response is the output response when the system has reached a stable condition after a transient response. The steady-state response can be determined by taking the limit as time approaches infinity.

The time it takes for the response to reach a steady state depends on the system's characteristics, such as the time constant and damping ratio. Generally, a system is considered to have reached a steady state when the output response has settled to within 5% of its final value.
For a given model, the "form" refers to the mathematical expression that represents its behavior. The unit step response is the output of the model when the input is a unit step function (a function that jumps from 0 to 1 at a specific time).

To find the unit step response, you can either solve the model's governing equations with the unit step function as input, or perform a Laplace transform, and then apply the inverse Laplace transform to obtain the response in the time domain.

The steady-state response is the final value of the output as time goes to infinity. It can be calculated by analyzing the form of the unit step response and determining the limiting value as the time approaches infinity.

To find the time it takes to reach the steady state, you need to analyze the unit step response's form and identify when the response stabilizes or reaches a certain percentage (e.g., 98%) of its final value. This time is considered the settling time and is an indication of how quickly the model reaches its steady state.

learn more about steady-state here: brainly.com/question/4956578

#SPJ11

To make bulb H dimmer than it was in circuit 9, you will need to decrease the flow (current) through it.

If the obstacle presented by the rheostat is doubled, the flow from the battery will decrease to less than half of what it was. This is because the overall resistance in the circuit has increased, leading to a reduced current.

The pressure difference (voltage) across the rheostat will increase due to the increased resistance. To calculate the pressure difference before and after the rheostat changes, use Ohm's Law (V=IR) with the correct obstacle and flow values.

The pressure difference across bulb H will decrease, as the overall current in the circuit has reduced due to the increased resistance of the rheostat. This decrease in pressure difference across bulb H will cause its brightness to diminish, making it dimmer than before.

To know more about Ohm's Law click on below link:

https://brainly.com/question/1247379#

#SPJ11

It will take approximately 0.00194 seconds before the capacitor is fully charged for the first time in this oscillating LC circuit.

In an oscillating LC circuit with L = 39 mH and C = 4.6 μF, we can determine the time it takes for the capacitor to be fully charged for the first time by first calculating the angular frequency (ω) and then finding the time period (T).

The angular frequency is given by the formula:

ω = 1 / √(LC)

Plugging in the values, we get:

ω = 1 / √(0.039 H * 4.6 × 10^(-6) F) ≈ 809.3 rad/s

The time period (T) is the reciprocal of the angular frequency:

T = 2π / ω

T ≈ 2π / 809.3 ≈ 0.00776 s

Since the capacitor is fully charged for the first time at a quarter of the time period, we divide the time period by 4:

t = T/4 ≈ 0.00776 s / 4 ≈ 0.00194 s

To learn more about capacitor click here

brainly.com/question/17176550

#SPJ11