A battery consists of
solution.
and an electrolyte, wh
Select one:
O a. Two dissimilar metals
b. An insulator material separating the metals
c. Both A and B
O d. Neither A nor B
Clear my choice

The return type of the method and the value returned by is SaltWater method are incompatible.

What is method?
A process connected to a message and an object is referred to as a method with object-oriented programming (OOP). An object is made up of state information and behaviour, which together make up the interface that outlines how any of the object's numerous consumers may use it. A method is a consumer-parametrized behaviour of an object. Behaviors are represented as methods, while data is represented as an object's properties. For instance, a Window object might contain properties like open and close while also having methods like open and close. In class-based programming, objects are instances of a certain class, and methods are defined within the class. One of the most crucial features that a method offers is method overriding, which allows the same name (for example, area) to be used for numerous distinct types of classes.

To learn more about method
https://brainly.com/question/28273269
#SPJ4

Both technicians are correct in saying that a car will typically pull to the side with the most positive camber and that a progressive-rate spring provides a smooth ride while also being able to support a heavier load.

Positive Camber: When your wheels are slanted outward, your vehicle's stability is increased. Negative Camber: High performance cars with superior cornering requirements frequently use negative camber because it gives the driver more control. Positive camber will make your automobile pull to either side, which will make it easier to steer and more stable on uneven terrain. Because of this, off-road vehicles frequently employ positive camber. It can also be observed on vintage race vehicles with softer suspension systems. It is applied to steering and suspension design. Positive camber refers to a wheel's top being farther out than its bottom (or tilted away from the axle).

Learn more about Camber here:

https://brainly.com/question/16447343

#SPJ4

The steady operating conditions are established, and the cross-sectional area of the exit opening is 0.15 inc then the Exit velocity is 34.04 ft/s

The amount of liquid that has

evaporated

m = V/V6

Now V = 0 6 gal

V = 0. 6 * 0 .13 3 68 ft

V = 0 080208 4 3

m =0 . 080208/0.016ft

M= 4. 765 cbm

The mass flowrate of exiting steam liquid becomes

m=m/Δt

& Δt= 45 min

At = 45 x 60 sec

m = 4 . 765/45 x 60

n = 0.00 1 765 ( lbm/s )

Now the exit velocity is

V = m v/A

& A = 0 15 in 2

A=0 .15/( 12 )²ft²

A = 0.001042 ( ft² )

" . V = 0 . 001 7 65 x 20. 093/0.00 1 042

V = 34. 04 ( ft² )

.Exit velocity is 34.04 ( ( ft²/s )

Learn more about velocity  here:

https://brainly.com/question/18084516

#SPJ4

Both technician  are correct tire pressures for the vehicle are located on the driver's side door pillar tire placard and the maximum tire pressure is located on the tire sidewall

The right tire pressure varies according to the vehicle's make, model, and type. Tire pressure for cars typically ranges from 30 to 35 PSI. Consult your car's manual or the driver-side door frame to determine the ideal pressure. Typically, the recommended tire pressure ranges from 30 to 35 PSI. You should consult your vehicle's owner's handbook or the placard that is often printed inside the driver's door with tyre and loading information to determine the proper tire pressure for your vehicle. The recommended tire pressure for your car can be found in the owner's manual or printed on the inside of the fuel tank flap or the sill of the driver's door of vehicle. For the front and rear tires on your car, the manufacturer might advise using different tyre pressures.

Learn more about pressure here:

https://brainly.com/question/14611102

#SPJ4

Answer:

This form examines literature selectively in order to support or refute an argument, deeply imbedded assumption, or philosophical problem already established in the literature. The purpose is to develop a body of literature that establishes a contrarian viewpoint

It's critical to keep in mind that cloud providers will store sensitive data when assessing the security of enterprise systems based on the cloud. altered copies of

What is enterprise systems?
defined as the massive, complicated computing systems that manage enormous amounts of data and allow organisations to coordinate and integrate their business activities. They ensure that information may be shared across all functional levels & management hierarchies and are typically a single system at the heart of organisations. Building Situational Applications in Virtual Enterprises has further information. Enterprise systems are pieces of software that offer services to a unified business structure. Software Implementation for Enterprise Resource Systems has further information. Information solutions that enable businesses to synchronise information across all of their operations. Integrating Enterprise Systems has more information.

To learn more about enterprise systems
https://brainly.com/question/13390630
#SPJ4

The flash converter should have a resolution of 3 bits in order to accurately represent the 1kHz sinusoid with an amplitude of 5-volt p-p.

What is volt?
The definition of a "volt," a measure of electric potential, commonly known as electromotive force, is "the potential difference between the two points of the a conducting wire carrying a continuous current equal to 1 ampere, when the power consumed between these points was equal to 1 watt." In other words, when a current of just one ampere travels through a resistance of one ohm, a potential of one volt emerges across that resistance. Similar to water pressure, "voltage" (V) represents the potential of energy to travel. Voltage has properties similar to those of water flowing through pipes. It's called the "water-flow analogy" in this case.

The sinusoid should have a 2.5-volt dc level, so the signal should swing between 0 and 5 volts. The flash converter should use an LM339 and a priority encoder 74LS148.

To learn more about volt
https://brainly.com/question/28632127
#SPJ4

The correct answer is a. brittle deformation. therefore the correct option is (a) option.

Brittle deformation is when rocks fail as rigid solids. The rocks will break, rather than bend, under these conditions to produce fractures. Brittle deformation occurs along discrete planes in the rock instead of involving the rock body as a whole.Brittle materials include glass, ceramic, graphite, and some alloys with extremely low plasticity, in which cracks can initiate without plastic deformation and can soon evolve into brittle breakage.

To learn more about Brittle deformation click the link below:

brainly.com/question/15116378

#SPJ4

Yes, the shapes are the same despite variation in translation, rotation, and scaling.

What is variation?
Variation is defined as a departure from the usual, such as the diversity of colours found in nature. A deviation from a recognised norm may be crucial. A doctor may be alerted to the possibility of a heart attack by a change in the pattern of the patient's heartbeat, for instance. Temperature variations from expected ranges show that global warming is causing a change in our climate. However, not all variation is unfavourable. One characteristic that makes each puppy individually appealing is the enormous variance in coloration of dogs, even between breeds.

To learn more about variation
https://brainly.com/question/14722489
#SPJ4

Check for leaks and fix the chiller. The ideal way to decrease refrigerant loss from a purge unit on a cfc-11 chiller is to take action.

In air conditioning and heat pump systems and chiller, refrigeration leaks are fairly prevalent and can be challenging to find. It requires the appropriate tools and a lot of practise. According to Refrigeration Technologies, the company that created the BigBlu Micro Leak Detector Solution, there are several sorts of leaks. During your maintenance experience, you will come into contact with each one at some point.

Standing Leaks (SL) are leaks that can be found when the system is fully equalised and at rest (off). This must include defrosted freezer evaporative coils. Thankfully, SL leaks are the most frequent of all.

Learn more about Chiller here:

https://brainly.com/question/17438851

#SPJ4

Both Technician are correct  hat is better to use a 6-point box-end wrench when possible to minimize the risk of stripping the head of the fastener,the ends are offset to continue to loosen or tighten a fastener.

When applying torque to turn or prevent the turning of objects—typically rotary fasteners like nuts and bolts—a wrench or spanner is used to provide grip and mechanical advantage. Wrenches come in many different sizes and shapes, and they are used to grip, fasten, turn, tighten, and loosen items like pipes, pipe fittings, nuts, and bolts. Any device you hold in your hands and use to carry out a specific type of task is referred to as a tool. For instance, a hammer, a saw, etc. You place a nut in between your finger and this tiny device, which is placed on the end of your finger. As a result, you can grasp a nut with just your finger tip and reach inside to grab it.

Learn more about wrench here:

https://brainly.com/question/799217

#SPJ4

Written a c program to compute the maximum absolutecolumn sum norm.

#include <iostream>    //In c program            

#include <cmath>

using namespace std;                                    

const int ROWCAP = 100;              

const int COLCAP = 100;

void initialiseMatrix(float matrix[][COLCAP],int rows,int columns);

float findNorm(float matrix[][COLCAP],int rows,int columns);

int main()

{

   int rows,columns;

   float matrix[ROWCAP][COLCAP];

   cout<<"Enter the number of rows: ";              

   cin>>rows;

   cout<<"Enter the number of columns: ";        

   cin>>columns;

   initialiseMatrix(matrix,rows,columns);              

 float L21 = findNorm(matrix,rows,columns);            

   cout<<"\nThe L21 norm is "<<L21;                

   return 0;

}

void initialiseMatrix(float matrix[][COLCAP],int rows,int columns)

{

   cout<<"Enter the matrix:\n";

   for(int i=0;i<rows;i++)                              

   {

       for(int j=0;j<columns;j++)

       {

          cin>> matrix[i][j];        

       }

   }

   cout<<"\nThe matrix entered was:\n";

   for(int i=0;i<rows;i++)                        

   {

       for(int j=0;j<columns;j++)

       {

           cout<<(int)matrix[i][j]<<" ";

       }

       cout<<"\n";

   }

}

float findNorm(float matrix[][COLCAP],int rows,int columns)          

{

    float L21=0;

    for(int j=0;j<columns;j++)

    {

        int squareSum = 0;          

      for(int i=0;i<rows;i++)

      {

         squareSum = squareSum + matrix[i][j]*matrix[i][j];        

      }

      L21 = L21 + sqrt(squareSum);        

    }

    return L21;

}

Learn more about program here:

https://brainly.com/question/7344518

#SPJ4

Shift register components can be found in the data route as A, B, C, and D. Take tmp0, tmp1, tmp2, and tmp3 as the outputs of the flip-flops A, B, C, and D, respectively. After the initial shift, when tmp ld is set to 1, the following occurs:

tmp0 (o/p of A) = CT

similarly, tmp1 (o/p of B) = tmp0

tmp2 (o/p of C) = tmp1

tmp3 (o/p of D) = tmp2.

Now, the output of A, B, C, and D would all be zero because tmp0, tmp1, and tmp2 were all initialised to zero. Flip flop A alone has the output, which is CT. These outputs are added in two stages: first, A is added to B (i.e., CT+tmp0), then C is added to D (i.e., tmp1+tmp2), and finally, the outputs of the first stage are added in the second stage before being shifted right by two bits, or divided by four. As a result, E flipflop stores the average of all the outputs, which is (CT + tmp0 + tmp1 + tmp2) /4.

So, A= tmp0 which eventually gets CT,

B=tmp1 which eventually gets tmp0 (=0),

C=tmp2 which eventually gets tmp1 (=0),

D=tmp3 which eventually gets tmp2 (=0),

E= avg of tmp0,tmp1,tmp2,tmp3 (=CT/4).

What is tmp?

A temporary file, or tmp is one that has been created to hold data temporarily, either for a program's interim needs or for later transfer to a permanent file. Computer programmes may produce it for a variety of reasons, including as when they are unable to allot enough memory for their duties, when they are working with data that is larger than the architecture's address space, or as a crude kind of inter-process communication.

To learn more about tmp

https://brainly.com/question/2456631

#SPJ4

The thermal observations suggest that the areas with jet plumes are colder than the areas without jet plumes.

A plume is a fluid motion whose primary source of kinetic energy and momentum flux is body forces. Forced plumes or buoyant jets are terms used to describe flows whose motion is changing from a jet to a plume. When a jet's fluid density deviates from the surrounding fluid density, it almost always turns into a plume. Groundwater pollution can result from pollutants that have been discharged into the environment. A plume is the name given to the resulting body of contaminated water within an aquifer, and plume fronts are the names given to its eroding edges. Water droplets may form at the air discharge due to condensation of warm, humid discharge air upon contact with colder ambient air after leaving the equipment.

Learn more about plume here:

https://brainly.com/question/13942024

#SPJ4

Workers of machine operations, inc. (mo), who lose their jobs with mo have a right to continued health-care coverage under mo's group plan unless they have their hours decreased from full-time to part-time.

How Employee Benefits from Company-Sponsored Health Insurance Plans?

One of the most significant advantages of full-time employment these days is eligibility for the employer's group health insurance plan. And, as healthcare reform evolves and affects the lives and finances of individuals and families, group health coverage through an employer becomes an increasingly valuable perk.

It can be quite reassuring to have a significant portion of medical expenses covered by an employer's benefit package. After all, with the exception of the extremely wealthy, an individual without health insurance is literally just one major injury or illness away from financial ruin.

To learn more about Health Care in Enginerring field, visit: https://brainly.com/question/14017920

#SPJ4

Yes,  {a,b},L is {w|w contains more 1s than 0s}. Idea: this is similar to the language where the ... a's and b's differ, unioned with all strings not of the form aibj.

This language requires at least two a's in a string. Given that any string of b's can be positioned in front of the first a, behind the second a, or in between the two a's, and given that the regular expression b* can be used to represent any string of b's, b*a b*a b* is a regular expression for this language.

The regular phrase (a + b)* (aa + ba + bb)b)(a + b)* (aa + ba + bb) + a + b + c)b* ab* ad)b* aa b* corresponds to the language of all strings over the alphabet "a, b."

The expression "a,b" =,L i="w|w has more 1s than 0s" Idea: Unioning any strings that are not of the form aibj, this is akin to the language where the... a's and b's differ.      

To learn more about String refer to:

brainly.com/question/25324400

#SPJ4

The answer of the array will be:

You should set the <code>maxSubsetSize</code> to <code>1</code> initially. Otherwise, the <code>maxSubsetSize</code> would be bigger than the size of the actual subset.

<code>int size = A.size();
int maxSubsetSize = 1;
int subsetSize = 1;
int andProduct = A[0];

for (int i = 1; i &lt; size; ++i) {
   if (andProduct &amp; A[i] == 0) { // if AND product is 0, reset the subset
size
       subsetSize = 1;
       andProduct = A[i];
   } else {
       ++subsetSize;
       andProduct &amp;= A[i];
       if (subsetSize &gt; maxSubsetSize) {
           maxSubsetSize = subsetSize;
       }
   }
}
return maxSubsetSize;
</code>

What is array?
An array is a type of data structure used in computer science that contains a set of elements (values and variables), each of which is identified by an array index or key. An array is stored in a way that allows a mathematical formula to determine each element's position given its index tuple. A linear array, sometimes referred to as a one-dimensional array, is the most basic sort of data structure. For instance, ten words with memory addresses 2000, 2004, 2008,..., 2036 (or 0x7D0, 0x7D4, 0x7D8,..., 0x7F4) may be used to store an array with ten 32-bit (4-byte) integer variables with indices 0 through 9. This would give the element with index I the address 2000 + I 4). First address refers to the memory location of the array's first element.

To learn more about array
https://brainly.com/question/28087779
#SPJ4

Scara robots blend linear Cartesian motion with Articulated rotation to create a new motion type that are often used in the electronics field.

What do you mean by electronics?

Electronics is an area of physics and electrical engineering that studies electron emission, behaviour, and consequences utilising electronic devices. Electronics varies from classical electrical engineering because it uses active devices to influence electron flow via amplification as well as rectification, whereas classical electrical engineering only uses passive effects to control electric current flow, such as resistance, capacitance, and inductance. Electronics has had a significant impact on the evolution of modern society. The discovery of the electron in 1897, followed by the invention of the vacuum tube, which could amplify and rectify minuscule electrical impulses, marked the beginning of the field of electronics and the electron age.

To learn more about electronics
https://brainly.com/question/28630529

#SPJ4

Answer:

A,C

Explanation:

its correct

Maintaining excess inventory to ensure that products will always be available are giving employees additional authority and responsibility and product-oriented layout.

The concept of lean manufacturing can be referred to or considered as the process of manufacturing the products through adaptation of unique techniques in a largely effective way through generation of a product-oriented layout.  

Employees are encouraged to form strong relationships with employees in their department but are discouraged from socializing with external partners.employees are encouraged to form strong relationships with employees in their department but are discouraged from socializing with external partners.

Therefore, Maintaining excess inventory to ensure that products will always be available are giving employees additional authority and responsibility and product-oriented layout.

Learn more about product-oriented layout on:

https://brainly.com/question/15968188

#SPJ2

Neither A nor B, both technicians, are wrong here because the leading shoe in a non-servo brake does not work in most cases, and the trailing shoe does not do most of the work when the brakes are applied while moving forward.

What is a Technician?

Technicians are highly skilled individuals who primarily work with technology in a variety of industries. They are well-versed in the technical aspects of the various items with which they work. They usually deal with electricity or technological advancements.

Technicians may be tasked with building equipment or materials related to their field of study. They may also be tasked with performing diagnostics and other maintenance tasks to ensure that the equipment functions properly. In the event of a problem, technicians may be required to perform basic repairs. Technicians must possess strong analytical and decision-making abilities.

To learn more about Technician and non-servo brake, visit: https://brainly.com/question/29348584

#SPJ1

Depending on the device geometry, doping profile, and external bias, the physical width of the depletion region in a typical Si diode can range from a few hundredths of a micrometer to tens of micrometers.

To Learn more About depletion region refer to:

https://brainly.com/question/29341283

#SPJ4

While, for, are pre-test loops.

What is loop?
A loop is a set of instructions that are repeatedly carried out in computer programming until a specific condition is met. Typically, a certain procedure, like getting and altering a piece of data, is carried out, and then a condition, like whether a counter has reached a specific number, is verified. If not, the subsequent command in the sequence directs the computer to go back to the first and repeat the process. If the condition has indeed been met, the subsequent instruction either branches outside of the loop or "falls through" to the following sequential instruction. A loop is a basic programming concept that is frequently utilised when creating programmes.

To learn more about loop
https://brainly.com/question/29415882
#SPJ4

It is False to state that in the MVC Architecture the functionality of the system is organized into services, with each service delivered from a separate server. The above scenario occurs within Client-Server Architecture.

Model-view-controller is a software architecture style for building user interfaces that divides the underlying program logic into three interrelated pieces. This is done to isolate internal information representations from how data is communicated to and accepted by the user.

The Model-View-Controller (MVC) architectural pattern, on the other hand, divides an application into three key logical components: the model, the view, and the controller. Every one of these components is designed to handle particular parts of an application's development.

Learn more about MVC Architecture:
https://brainly.com/question/28299030
#SPJ1

According to the scenario, the statement made by the Technician A is found to be correct, i.e. a good way to see if an air filter is still serviceable is to hold the filter element up to the light and look through it.

The function of an air filter is to clean the air that circulates through your heating and cooling system correspondingly. It basically traps and holds too many types of particulates and contaminants that significantly affect your health.

While the statement made by Technician B "t is usually not necessary to clean the inside of the air filter housing" is not as accurate because if you never clean the air filter, the accumulation of dirt and dust particles in your cooling and heating system is sufficiently high which definitely affect your health to a larger extent.

Therefore, the statement made by the Technician A is found to be correct, i.e. a good way to see if an air filter is still serviceable is to hold the filter element up to the light and look through it.

To learn more about Technicians, refer to the link:

https://brainly.com/question/18428188

#SPJ1

Departmental boundaries will you place this network segment in this scenario.

What is scenario?
A scene is a synoptical collage of an action or sequence of actions and occurrences in the performing arts. A play's narrative was literally pinned to the rear of the scenery in the commedia dell'arte as an outline for entrances, exits, and action. The material from which the scenery was built is also known as canovaccio or "that which is fastened to the canvas." Scenarios from of the Renaissance that have survived primarily consist of character names, succinct descriptions of events, and references to certain lazzi without any further explanation. Although it is thought that a scenario served as the foundation for a completely improvised performance, it is also possible that they served as simple reminders of the story for those cast members who could read.

To learn more about scenario
https://brainly.com/question/29342162
#SPJ4

The group suggested that for executives and high-level managers of Dizzyland, a large theme park in Florida, output types such as reports, presentations, and briefings are most appropriate.

What is executive?
The executive branch of government is in charge of governing a state and enforcing the law. Power is divided across many branches (executive, legislative, and judicial) in political systems founded on the idea of separation of powers in an effort to prevent the consolidation of power in the hands of the a single group of people. In such a system, his executive does not enact or interpret laws (those functions belong to the legislature) (the role of the judiciary). Instead, the executive carries out the law as it has been created by the legislative and adjudicated by the courts. A decree and executive order, for example, may have come from the executive. Regulations are frequently created by executive bureaucracies.

To learn more about executives
https://brainly.com/question/15060039
#SPJ4

Java is a network-centric, object-oriented, and multi-platform language. One of the most popular programming languages is this one. Another platform for computers is Java.

1. Java Platform, Standard Edition (Java SE): The Java SE API provides the fundamental features of the Java programming language. It outlines every type and object's fundamentals for high-level classes. It is utilised for graphical user interface (GUI) development, networking, security, database access, and XML parsing.

2. Java Platform, Enterprise Edition (Java EE): The Java EE platform provides an API and runtime environment for creating and utilising massively scalable, multi-tiered, dependable, and secure network applications.

3. Java Programming Language Platform, Micro Edition (Java ME): Java ME is a platform for executing Java programmes on mobile phones and other small devices. It includes an API and a small-footprint virtual machine.

4. Java FX: Using a simple user-interface API, JavaFX provides a platform for creating sophisticated internet applications. In order to benefit from higher-performance clients, a contemporary look and feel, and high-level APIs for connecting to networked data sources, Java uses hardware-accelerated graphics and media engines.

To Learn more About Java refer to:

https://brainly.com/question/25458754

#SPJ4

The stress caused by a 70 kg woman in heeled shoes (assume a 6.0- mm -diameter heel) standing on one heel is 0.02638699 N/m.

Stress is a term used to define the strength of the forces that lead to deformation. The general definition of stress is force per unit area. Tensile stress is what we refer to when forces draw on an object and induce its elongation, similar to how an elastic band stretches.

Given that mass, m = 70 kg

diameter = 6.0 mm = 0.6 cm

then, radius,

r = 0.35 cm

= 0.0035 m

A = areas of cross-section

[tex]\pi r^2 \; and\;\;stress = \dfrac{mg}{a}[/tex]

Putting the values in the formula

[tex]stress = \dfrac{(70) (9.8) }{\pi (0.0035)^2} = 0.02638699 \; N/m^2[/tex]

Therefore, the stress caused by the woman is 0.02638699 N/m2.

To learn more about stress, refer to the link:

https://brainly.com/question/19053575

#SPJ1

Jupiter's band structure which is composed of contrasting regions known as belts and zones is given in the attached image.

The asteroid belt is a torus-shaped area in the Solar System lying roughly between Jupiter and Mars orbits. It is home to a large number of solid, irregularly shaped things of various sizes, but far smaller than planets, known as asteroids or minor planets.

Zones are lighter bands seen in the atmospheres of gas giants. They are found at higher elevations and are high-pressure areas. In the zones, there is an internal updraft.

It is to be noted that Jupiter, the fifth planet from our Sun, is by far the biggest planet in the solar system, weighing more than twice as much as all the other planets combined. Jupiter's bands and swirls are actually frigid, windy clouds of ammonia and water floating in a hydrogen and helium atmosphere.

Learn more about Jupiter's Band Structure:
https://brainly.com/question/5973837
#SPJ1

Simple addition, subtraction, multiplication, division, and logic operations like OR and AND are all performed by the ALU

Arithmetic logic units are digital circuits that can perform both arithmetic and logic operations (ALU). It refers to the central processing unit (CPU) of a computer's main component (CPU). Modern CPUs have incredibly powerful and complex ALUs. In addition to ALUs, modern CPUs also feature a control unit (CU).

Data and instructions for the programme are kept in the memory. The control unit reads information and commands from memory.

Therefore, utilising three control lines, any one of these eight actions can be found. Think of an ALU with four arithmetic operations: addition, subtraction, multiplication, and division. Remember that the ALU contains four logical operations as well: OR, AND, NOT, and EX- OR.

To learn more about ALU operation refer to:

https://brainly.com/question/10975854

#SPJ1