As the pushing force x increases, it would be opposed by the static frictional force. As x passes a certain threshold and overcomes the maximum static friction, the block will start moving and will require a smaller magnitude x to maintain opposition to the kinetic friction and keep the block moving at a constant speed. If x stays at the magnitude required to overcome static friction, the net force applied to the block will cause it to accelerate in the same direction.
Let w denote the weight of the block, n the magnitude of the normal force, x the magnitude of the pushing force, and f the magnitude of the frictional force.
The block is initially at rest, so the net force on the box in the horizontal and vertical directions is 0:
n + (-w) = 0
n = w = m g = (5.3 kg) (9.80 m/s²) = 51.94 N
The frictional force is proportional to the normal force, so that f = µ n where µ is the coefficient of static or kinetic friction. Before the block starts moving, the maximum static frictional force will be
f = 0.67 (51.94 N) ≈ 35 N
so for 0 < x < 35 N, the block remains at rest and 0 < f < 35 N as well.
The block starts moving as soon as x = 35 N, at which point f = 35 N.
At any point after the block starts moving, we have
f = 0.48 (51.94 N) ≈ 25 N
so that x = 25 N is the required force to keep the block moving at a constant speed.
As x is increasing it will be opposed by a static frictional force and for the object to start moving and maintain its acceleration, the magnitude of x must exceed the magnitude of the static frictional force and kinetic frictional force
Magnitude of normal force ( object at rest ); n = 51.94 N Required magnitude of x before the movement of object ; x = 35 NMagnitude of x after object start moving x = 25 NGiven data :
mass of block at rest ( m ) = 5.3 kg
Coefficient of static friction ( μ_s ) =0.67
Coefficient of kinetic friction is ( μ_k ) = 0.48
Horizontal force applied to block = x
First step : magnitude of normal force ( n ) when object is at rest
n = w where w = m*g
n - w = 0
n - ( 5.3 * 9.81 ) = 0 ∴ n = 51.94 N
Second step : Required magnitude of x before the movement of object
F = μ_s * n
F = 0.67 * 51.94 = 34.79 N ≈ 35 N
∴ The object will start moving once F and x = 35 N
Final step : Magnitude of x after object start moving
F = μ_k * n
= 0.48 * 51.94 = 24.93 N ≈ 25 N
∴ object will continue to accelerate at a constant speed once F and x = 25N
Learn more : https://brainly.com/question/21444366
Climate is the day-to day condition of an area including temperature, pressure, and precipitation. Weather is the usual pattern of temperature, pressure, and precipitation pf an area over time. True or False
Answer:
False
Explanation:
Weather is the day-to day condition of an area including temperature, pressure, and precipitation. Climate is the usual pattern of temperature, pressure, and precipitation pf an area over time.
It is true that the climate is the day-to day condition of an area including temperature, pressure, and precipitation. Weather is the usual pattern of temperature, pressure, and precipitation pf an area over time.
What is the relation between climate and weather?The weather is the current state of the atmosphere for a particular place and at a definite or short period of time. The atmospheric conditions which are considered are temperature, cloudiness, dryness, humidity, rain, sunshine and wind.
The climate is the atmospheric conditions of a particular place over a long time period.
It is the condition of the Earth and the atmosphere which tells us about the extent at either it is hot or cold, wet or dry, or it can be calm or stormy type. Basically the weather changes and happened at the least level of the atmosphere and the layer is known to be the troposphere that is found just below the stratosphere. Troposphere is the layer present in the most lower level forming the Earth's atmosphere. In this layer of has 75% mass out of atmospheric mass and 99% of the total mass of water vapor.
So, the given statement is true.
To know more about weather and climate,
https://brainly.com/question/11265560
#SPJ6
differences between a resultant and a equilibrium
Answer:
I found "As nouns the difference between resultant and equilibrium is that resultant is anything that results from something else; an outcome while equilibrium is the condition of a system in which competing influences are balanced, resulting in no net change. is following as a result or consequence of something."
Explanation:
List at least 4 aspects to evaluate the quality of an internet site
Answer:
authority, accuracy, objectivity, currency, coverage, and appearance.
Explanation:
There are six (6) criteria that should be applied when evaluating any Web site. or each criterion, there are several questions to be asked. The more questions you can answer "yes", the more likely the Web site is one of quality.
What is the result of increasing the speed at which a magnet moves in and
out of a wire coil?
O A. The current in the wire increases.
B. The magnetic field around the magnet decreases.
C. The current in the wire decreases.
O D. The magnetic field around the magnet increases.
Answer:
Explanatio
Increasing the speed of the relative motion between the coil and the magnet – If the same coil of wire passed through the same magnetic field but its speed or velocity is increased, the wire will cut the lines of flux at a faster rate so more induced emf would be produced. 3)n:
A rolling ball moves from x1 = 8.0 cm to x2 = -4.1 cm during the time from t1 = 2.9 s to t2 = 6.0 s .
Complete Question
A rolling ball moves from [tex]x_1 = 8.0 \ cm[/tex] to [tex]x_2 = - 4.1 \ cm[/tex] during the time from [tex]t_1 = 2.9 s[/tex] to [tex]t_2 = 6.0s[/tex]
What is its average velocity over this time interval?
Answer:
The velocity is [tex]v = 3.903 \ m/s[/tex]
Explanation:
From the question we are told that
The first position of the ball is [tex]x_1 = 8.0 \ cm[/tex]
The second position of the ball is [tex]x_2 = - 4.1 \ cm[/tex]
Generally the average velocity is mathematically represented as
[tex]v = \frac{ x_1 - x_2}{t_2 - t_1}[/tex]
=> [tex]v = \frac{ 8 - -4.1 }{ 6 - 2.9 }[/tex]
=> [tex]v = 3.903 \ m/s[/tex]
A jet airplane with a 75.0 m wingspan is flying at 260 m/s. What emf is induced between the wing tips in V if the vertical component of the Earth’s magnetic field is 3.00 × 10-5 T?
Answer:
0.585V
Explanation:
Given that:
B = 3.00 × 10-5 T
l = 75.0 m
v = 260 m/s
From Blv = emf between the wing tips
= 3.00 × 10-5 T × 75×260
= 117/200
= 0.585V
Hence, the emf between the wing tips is 0.585V
what is the speed of rocket that travels 9km in 10 seconds
Answer:
900
Explanation:
v = s / t = 9000m / 10 s = 900m/s
plz mark Brainliest
Answer:
3240km/h. or, 900m/s.
Explanation:
plz mark mine as brainliest. i gave both.
Which of the following would probably need the greatest force to overcome its inertia?
option 1 a tennis ball 2 a sports ar 3 a dump truck and four a bicycle
Answer:
A dump truck.
Explanation:
Inertia can be defined as the tendency of an object or a body to continue in its state of motion or remain at rest unless acted upon by an external force.
In physics, Sir Isaac Newton's first law of motion is known as law of inertia and it states that, an object or a physical body in motion will continue in its state of motion at continuous velocity (the same speed and direction) or, if at rest, will remain at rest unless acted upon by an external force.
Mathematically, it is given by the formula;
[tex] F = ma[/tex]
Where;
F represents force measured in Newton.m represents the mass of an object measured in kilograms.a represents acceleration measured in meter per seconds square.The inertia of an object such as a tractor trailer rig is greatly dependent or influenced by its mass; the higher quantity of matter in a dump truck, the greater will be its tendency to continuously remain at rest.
Hence, a dump truck would probably need the greatest force to overcome its inertia because it has more mass than all the other objects in the category. Also, the mass of an object is directly proportional to its inertia, as well as the force applied.
Answer:As one of Newton's Laws of Gravitational force The answer would Be a dump truck because it includes one of Newton's Laws of Gravitational force in the abstract Laws of gravity.
When a potential difference of 10 V is placed across a certain solid cylindrical resistor, the current through it is 2 A. If the diameter of this resistor is now tripled, the current will be:______.A) 18 A.
B) 2/3 A.
C) 3 A.
D) 2/9 A.
E) 2 A.
Answer:
sorry I wish I could it help you
A rocket traveling at 36.96 m/s is accelerated uniformly to 74.44 m/s over a 21.37 s interval. What is its displacement during this time?
Answer:
s = 1190.3 m = 1.19 km
Explanation:
First we find the acceleration by using first equation of motion:
Vf = Vi + at
where,
Vf = Final Velocity = 74.44 m/s
Vi = Initial Velocity = 36.96 m/s
a = acceleration = ?
t = time = 21.37 s
Therefore,
74.44 m/s = 36.96 m/s + a(21.37 s)
a = (74.44 m/s - 36.96 m/s)/21.37 s
a = 1.75 m/s²
Now, we use 2nd equation of motion to find distance covered (s):
s = Vi t + (1/2)at²
s = (36.96 m/s)(21.37 s) + (1/2)(1.75 m/s²)(21.37 s)²
s = 789.83 m + 400.47 m
s = 1190.3 m = 1.19 km
A car weighing 1,356 N is speeding down a highway with a velocity of 83 km/h. What is the momentum of this car
Answer:
The momentum of the car is 3190.74 kgm/s
Explanation:
Given;
weight of the car, w = 1,356 N
velocity of the car, v = 83 km/h = 23.06 m/s
The mass of the car is given by;
m = w/g
where;
g is acceleration due to gravity = 9.8 m/s²
m = 1356 / 9.8
m = 138.367 kg
The momentum of this car is given by;
P = mv
P = (138.367 x 23.06)
P = 3190.74 kgm/s
Therefore, the momentum of the car is 3190.74 kgm/s
write an email to your friend about your
preparation for the upcoming exam
Answer:
You will be very glad to know that my preparation for HSC examination is very good. I have prepared myself for the HSC Examination 2015. I am confident that I will obtain very good marks in the examination. I have revised them several times and I am hopeful of obtaining distinction marks in all the subjects.
Explanation:
This is from Brainly hope this person helped you
Light passes through a 0.15 mm-wide slit and forms a diffraction pattern on a screen 1.25 m behind the slit. The width of the central maximum is 0.75 cm. What is the wavelength of the light?
a. 400nm
b. 450nm
c. 510nm
d. 600nm
Answer:
b. 450 nm
Explanation:
The wavelength of light can be calculated by using the formula derived in Young's double slit experiment. The formula is as follows:
Δx = λL/d
Δx/2 = λL/2d
where,
Δx/2 = half distance between consecutive dark fringes = width of central maximum = 0.75 cm = 0.0075 m
λ = wavelength of light = ?
L = Distance of Screen = 1.25 m
d = width of slit = 0.15 mm = 0.00015 m
Therefore,
0.0075 m = λ(1.25 m)/(0.00015 m)
λ = (0.0075 m)(0.00015 m)/2(1.25 m)
λ = 4.5 x 10⁻⁷ m = 450 nm
Thus, the correct option is:
b. 450 nm
PLEASEEE HELPPPPP does anyone know these answers?
Answer:
oof ok
Explanation:
Thank you :)
A projector lens projects an image from a 6.35 cm wide LCD screen onto a
screen 3.25 m wide. If the focal length of the projector lens is 13.8 cm, the screen
must be how far from the projector
Answer:
For any given projector, the width of the image (W) relative to the throw distance (D) is know as the throw ratio D/W or distance over width. So for example, the most common projector throw ratio is 2.0. This means that for each foot of image width, the projector needs to be 2 feet away or D/W = 2/1 = 2.0.
A 50 g mass is freely hanging from a horizontal meter stick at a distance of 99 cm from the pivot. Calculate the weight force W that the mass exerts on the meter stick? ·Calculate the torque that the weight force exerts about the pivot? 4. What does the pivot exert on the meter stick?
Answer:
W = 0.49 N
τ = 0.4851 Nm
Force
Explanation:
The weight force can be found as:
W = mg
W = (0.05 kg)(9.8 m/s²)
W = 0.49 N
The torque about the pivot can be found as:
τ = W*d
where,
τ = torque
d = distance between weight and pivot = 99 cm = 0.99 m
Therefore,
τ = (0.49 N)(0.99 m)
τ = 0.4851 Nm
The pivot exerts a FORCE on the meter stick because the pivot applies force normally over the stick and has a zero distance from stick.
Which is the BEST example of selective attention?
Answer:
Examples include listening carefully to what someone is saying while ignoring other conversations in a room (the cocktail party effect) or listening to a cell phone conversation while driving a car. Attention is one of the most intensely studied topics within psychology and cognitive neuroscience.
A racecar accelerates from rest at 6.5 m/s2 for 4.1 s. How fast will it be going at the end of that time?
Answer:
The final velocity of the car is 26.65 m/s.
Explanation:
Given;
acceleration of the racecar, a = 6.5 m/s²
initial velocity of the car, u = 0
time of motion, t = 4.1 s
The final velocity of the car is given by;
v = u + at
where;
v is the final velocity of the car
suvstitute the givens
v = 0 + (6.5)(4.1)
v = 26.65 m/s.
Therefore, the final velocity of the car is 26.65 m/s.
What is magnet made of
Answer:
metals like iron or nickel
Explanation:
PLEASE HELP
What are the most common limiting factors in a cloud forest ecosystem?
What are the most common limiting factors in a coral reef ecosystem?
What are the most common limiting factors in a desert ecosystem?
What is an abiotic infectious agent?
Name five types of bacteria.
Does anyone skateboard still?
Answer:
yes
Explanation:
people still skateboard that is an easy question
A typical atomic polarizability is 1 × 10-40 (C·m)/(N/C). If the q in p = qs is equal to the proton charge e, what charge separation s could you produce in a typical atom by applying
Answer:
s = 6.25 10⁻²² m
Explanation:
Polarizability is the separation of electric charges in a structure, in the case of the atom it is the result of the separation of positive charges in the nucleus and the electrons in their orbits, macroscopically it is approximated by
p = q s
s = p / q
let's calculate
s = 1 10⁻⁴⁰ / 1.6 10⁻¹⁹
s = 0.625 10⁻²¹ m
s = 6.25 10⁻²² m
We see that the result is much smaller than the size of the atom, therefore this simplistic model cannot be taken to an atomic scale.
The power of the situation represents
minority influence.
role expectations.
personal control.
social control
I think the answer is c but I'm not sure
A car travels 23.0 m/s for 1.0 hours and then accelerates for 30.0 seconds to reach 40.0 m/s. What was the total distance traveled by this car
Answer:
s = 83.85 km
Explanation:
First we calculate the distance covered by car, while traveling at constant speed:
s₁ = v₁t₁
where,
s₁ = distance covered at constant speed = ?
v₁ = constant speed = 23 m/s
t₁ = time of travel at constant speed = 1 hr = 3600 s
Therefore,
s₁ = (23 m/s)(3600 s)
s₁ = 82800 m = 82.8 km
Now, we calculate the distance travelled in accelerated motion. First we use 1st equation of motion to find acceleration:
Vf = Vi + at₂
where,
Vf = Final velocity = 40 m/s
Vi = Initial Velocity = 30 m/s
a = acceleration = ?
t₂ = time = 30 s
Therefore,
40 m/s = 30 m/s + a(30 s)
a = 10 m/s/30 s
a = 0.33 m/s²
Now, we use 2nd equation of motion for distance:
s₂ = Vi t₂ + (1/2)at₂²
s₂ = (30 m/s)(30 s) + (1/2)(0.33 m/s²)(30 s)²
s₂ = 900 m + 150 m
s₂ = 1050 m = 1.05 km
So, the total distance covered was:
s = s₁ + s₂
s = 82.8 km + 1.05 km
s = 83.85 km
A vehicle travels with an average speed of sav = 15 mi/hr.
A wagon with a weight of 300 N is accelerated across a level surface at 0.5 m/s2. What net force acts on the wagon?
9.0 N
15 N
150 N
610 N
Answer:
F = 15.29[m/s²].
Explanation:
To solve this problem we must use Newton's second law which tells us that the force is equal to the product of mass by acceleration.
ΣF =m*a
where:
m = mass [kg]
a = acceleration = 0.5 [m/s²]
Therefore we must find first the mass.
[tex]W =m*g\\m=W/g\\m = 300/9.81\\m = 30.58 [kg][/tex]
Now replacing in Newton's second law.
[tex]F = m*a\\F = 30.58*0.5\\F=15.29[m/s^{2}][/tex]
(b) In the USA, drones are not allowed to be flown too high above the ground.
Suggest one possible risk of flying a drone too high above the ground.
Plz complete thank you in advance
The 400-foot altitude limit was put in place for the sake of airspace safety, and there is a risk to country security as well as the privacy of citizens.
What are drones?Unmanned aerial vehicles (UAVs), sometimes known as drones, are used for a variety of jobs, from routine to extremely dangerous. These robotic-looking planes can be seen practically everywhere, from delivering groceries to your home to rescuing avalanche victims.
The 400-foot altitude restriction was ultimately implemented for airspace safety. Given the breadth of the airspace above 400 feet, the likelihood of a drone colliding with a human aircraft is exceedingly remote, but the consequences might be disastrous.
Any aerial vehicle that uses software to fly autonomously or that may be controlled remotely by a pilot is referred to as a drone. Numerous drones come equipped with cameras to gather visual data and propellers to stabilize flying paths. Drone technology has been incorporated into industries like videography, search and rescue, agriculture, and transportation.
When in uncontrolled (Class G) airspace, your drone must be flown 400 feet above the ground or less.
To know more about drones:
https://brainly.com/question/27753670
#SPJ2
What did Isaac Newton’s investigation if the gravity explain ?
Answer:
Gravity acts on all objects in the universe.
Explanation:
What is the similarity between relative dating and radioactive dating? I will mark brainlest. I dont know how btw
Answer:
relative dating and radioactive dating are two methods in archeaology to determine the age of fossils and rocks
Explanation:
the act of or study of fossils is important for the determination of the kind of organism it represents how the organism lived and how it was preserved on the Earth’s surface over the past 4600000000 years
A cow is given a growth hormone and then compared to another cow that was not given a growth hormone. Both cows were weighed at 2 years.
The complete question is as follows:
A cow is given a growth hormone and then compared to another cow that was not given a growth hormone. Both cows were weighed at 2 years. What is the independent variable?
if the cow is given growth hormone or not
weight of the cow
same cows
type of growth hormone
Answer:
The correct answer is - if the cow is given growth hormone or no
Explanation:
The independent variable is here is if the growth hormone is given or not as the variable which is subject to change or manipulated during an investigation and affects the dependent variable is known as the independent variable.
Due to this independent variable manipulation the weight of the cows might be different which makes the weights as the dependent variable.