A 120 μF capacitor is connected to an ac generator with an rms voltage of 25.0 V and a frequency of 130.0 Hz .What is the rms current in this circuit? ....A

To solve this problem, we can use the formula for the relationship between pressure and volume for an ideal gas. So, the final pressure of the ideal gas is approximately 26.4 atm, which corresponds to option C.

P1V1 = P2V2
where P1 is the initial pressure, V1 is the initial volume, P2 is the final pressure, and V2 is the final volume.
We are given that the initial volume V1 is 4.20 L and the final volume V2 is 18.9 L. We are also given the initial pressure P1, which is 119 atm. We want to find the final pressure P2.
Plugging in the values we know into the formula, we get:
(119 atm)(4.20 L) = P2(18.9 L)
Solving for P2, we get:
P2 = (119 atm)(4.20 L) / 18.9 L
P2 = 26.4 atm
Therefore, the final pressure is 26.4 atm, which is answer choice C.

To find the final pressure of an ideal gas that expands from 4.20 L to 18.9 L at constant temperature with an initial pressure of 119 atm, we can use Boyle's Law. Boyle's Law states that for an ideal gas at constant temperature, the product of pressure and volume remains constant. Mathematically, it can be represented as:
P1 * V1 = P2 * V2
where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.
We are given:
P1 = 119 atm
V1 = 4.20 L
V2 = 18.9 L
We need to find P2 (final pressure).
Using Boyle's Law, we have:
119 atm * 4.20 L = P2 * 18.9 L
Now, we can solve for P2:
P2 = (119 atm * 4.20 L) / 18.9 L
P2 ≈ 26.4 atm
So, the final pressure of the ideal gas is approximately 26.4 atm, which corresponds to option C.

Visit here to learn more about Pressure:

brainly.com/question/12977546

#SPJ11

An Earth satellite travels in an elliptical orbit with a semimajor axis of a, a period T, and an eccentricity of the maximum radial velocity of the satellite is 2πaɛ/(T√(1 - ɛ^2)).

At the point of greatest distance from the Earth (apogee), the distance between the Earth and the satellite is (1+ɛ)a.

Using conservation of energy, we can write:

E = [tex]1/2 mv^2 - GmM/(r)[/tex]

where v is the velocity of the satellite, and r is the distance between the Earth and the satellite.

At perigee, the velocity of the satellite is maximum and the distance is (1-ɛ)a. At apogee, the velocity of the satellite is minimum and the distance is (1+ɛ)a.

Setting the energy at perigee and apogee equal to each other, we get:

1/2 mv_perigee^2 - GmM/((1-ɛ)a)) = [tex]1/2 mv_{apogee}^2 - GmM/((1+\epsilon)a))[/tex]

Simplifying this equation, we get:

[tex]v_{perigee}^2 - v_{apogee}^2[/tex] = 2GM(ɛ/a)

At perigee, the velocity of the satellite is equal to the sum of the radial and tangential components of the velocity. The tangential component is given by:

v_tangential = 2πa/T

The radial velocity at perigee can be found by subtracting the tangential velocity from the total velocity:

v_radial = [tex]\sqrt{(v_{perigee}^2 - v_{tangential}^2)[/tex]

Substituting v_perigee^2 - v_apogee^2 = 2GM(ɛ/a), we get:

v_radial = [tex]\sqrt{(2GM(\epsilon/a) - (2\pi a/\tau)^2)[/tex]

Simplifying this expression, we get:

v_radial = [tex]2\pi a\epsilon/(\tau\sqrt{(1 - \epsilon^2))[/tex]

Radial velocity refers to the speed at which an object moves towards or away from an observer along the line of sight. This can be determined by measuring the Doppler shift of spectral lines in the light emitted by the object. When an object is moving towards an observer, the wavelength of the emitted light is shortened, resulting in a shift towards the blue end of the spectrum. Conversely, when an object is moving away from an observer, the wavelength is lengthened, causing a shift towards the red end of the spectrum. By measuring this shift, astronomers can determine the radial velocity of the object.

Radial velocity measurements have a wide range of applications in astronomy, including the detection of exoplanets through the radial velocity method, the determination of the rotation rate of stars, the measurement of the mass and motion of galaxies, and the study of the expansion of the universe.

To learn more about Radial velocity visit here:

brainly.com/question/30927578

#SPJ4

The temperature of the air needed for the hot air balloon to achieve lift-off from Earth's surface is 190°C.

To calculate the temperature of the air needed to achieve lift-off, we can use the ideal gas law: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the universal gas constant, and T is the temperature. We can rearrange this equation to solve for temperature: T = PV/nR.

We know that the basket load of the hot air balloon is 2670 N. To calculate the volume of air needed to lift this load, we can use the equation: V = (m + M)/ρ, where m is the mass of the hot air balloon, M is the mass of the basket load, and ρ is the density of air. The density of air is approximately 1.2 kg/m³ at standard temperature and pressure (STP).

Assuming that the mass of the hot air balloon is negligible compared to the basket load, we can simplify the equation to V = M/ρ. Plugging in the values, we get V = 2225 m³.

Now we can plug in the values for pressure (atmospheric pressure at sea level is approximately 101.3 kPa), volume (2225 m³), number of moles (which we can calculate using the mass of air and the molar mass of air), and the universal gas constant (8.31 J/mol*K) to solve for temperature.

After calculations, we get the temperature needed for lift-off to be approximately 190°C.

To know more about temperature of the air, refer here:
https://brainly.com/question/26706491#
#SPJ11

The total resistance of the circuit is 36.8 ohms, the total reactance X = -63.4 ohms, and the average power dissipated in the circuit is 1348 watts.

Step 1: Calculate the impedance Z of the circuit using the given values of RMS current and voltage and the phase angle between them:

Z = Vrms / Irms = 232 V / 6.30 A = 36.8 ohms

Calculate the resistance R of the circuit using the impedance Z and the phase angle between voltage and current:

R = Z * cos(57.0°) = 36.8 ohms * cos(57.0°) = 18.6 ohms

Calculate the reactance X of the circuit using the impedance Z and the phase angle between voltage and current:

X = Z * sin(57.0°) = 36.8 ohms * sin(57.0°) = 31.7 ohms

Calculate the inductance XL and capacitance XC of the circuit using the reactance X:

Calculate the total reactance X of the circuit by subtracting XC from XL:

X = XL - XC = 31.7 ohms - (-31.7 ohms) = -63.4 ohms

Calculate the total resistance of the circuit by adding the resistance R to the absolute value of the total reactance X:

Rtotal = R + |X| = 18.6 ohms + 63.4 ohms = 82.0 ohms

Calculate the average power dissipated in the circuit using the RMS current and the total resistance:

Pavg = Irms^2 * Rtotal = 6.30 A^2 * 82.0 ohms = 1348 watts

To know more about resistance click here:

https://brainly.com/question/30266391

#SPJ11

Jupiter has the strongest magnetic field in our solar system, about 1.4 mT at its poles and consult Appendix E, its magnetic dipole moment is approximately 1.4 x 10^4 Am².

To find Jupiter's magnetic dipole moment, we will use the formula for the magnetic field at the poles of a dipole:
B = μ₀ * (m * R³) / (4π * R³)
where:
- B is the magnetic field strength at the poles
- μ₀ is the permeability of free space (4π x 10^(-7) Tm/A)
- m is the magnetic dipole moment
- R is the distance from the dipole (in this case, the radius of Jupiter)

We are given B = 1.4 mT (1.4 x 10^(-3) T) and the radius of Jupiter (R) = 69,911 km (6.9911 x 10^7 m). We want to find m, the magnetic dipole moment.

First, let's rearrange the formula to solve for m:
m = (B * 4π * R³) / (μ₀ * R³)

Now, plug in the values for B, R, and μ₀:
m = (1.4 x 10^(-3) T * 4π * (6.9911 x 10^7 m)³) / (4π * 10^(-7) Tm/A * (6.9911 x 10^7 m)³)

Notice that (6.9911 x 10^7 m)³ cancels out in the numerator and the denominator, as well as the 4π:
m = (1.4 x 10^(-3) T) / (10^(-7) Tm/A)

Now, simply divide the numbers:
m = 1.4 x 10^(4) Am².

Learn more about magnetic dipole moment here:

brainly.com/question/14355450

#SPJ11

Answer:

Density of water = 1 g / cm^3 = 1000 kg / m^3

(Density and  specific gravity have same numerical values)

Weight of water = 10 * M = 10000 Newtons / m^3

W = weight in air = weight in water + B     where B = buoyant force

B = 10 - 8 = 2 Newtons

B = 2 N = v * 10000 N / m^3 * .86      (where .86 is weight of liquid displaced as compared to water))    

v = (2 / 10000 m^3) / .86 = = .0002.33 m^3

Maximum shear stress, τ_max, can be calculated using the formula [tex]τ_max = VQ/It,[/tex]  where V is the shear force, Q is the first moment of area of the cross-section, I is the moment of inertia, and t is the thickness of the beam.

Given [tex]v=36 kN[/tex]  and[tex]w=300 mm[/tex] , we need additional information such as the dimensions and material properties of the beam to calculate Q and I. Therefore, the maximum shear stress cannot be determined with the given information. In order to determine the maximum shear stress, we need additional information about the dimensions and material properties of the beam. However, we can use the formula [tex]τ_max = VQ/It,[/tex] where V is the shear force, Q is the first moment of area of the cross-section, I is the moment of inertia, and t is the thickness of the beam. With the given shear force of [tex]v=36 kN[/tex] and width of [tex]w=300 mm[/tex] , we can calculate τ_max once we have information about the beam's dimensions and material properties. It's important to note that the maximum shear stress occurs at the location where the shear force is maximum.

learn more about shear stress here:

https://brainly.com/question/30328948

#SPJ11

(a) The lowest temperature at the throat of the nozzle is 589.82 K.

(b) The lowest pressure at the throat of the nozzle is 516.65 kPa.


1. Identify given values: y = 1.4, P1 = 800 kPa, T1 = 700 K.
2. Apply isentropic relations for converging-diverging nozzle at the throat.
3. Calculate T2/T1 = (2/(y + 1)) = (2/(1.4 + 1)) = 0.2857.
4. Calculate the lowest temperature: T2 = T1 * T2/T1 = 700 K * 0.2857 = 589.82 K.
5. Calculate P2/P1 = (T2/T1)^(y/(y - 1)) = (0.2857)^(1.4/0.4) = 0.6458.
6. Calculate the lowest pressure: P2 = P1 * P2/P1 = 800 kPa * 0.6458 = 516.65 kPa.

To know more about isentropic click on below link:

https://brainly.com/question/13001880#

#SPJ11

For7-Ω and 20-Ω resistors in a parallel circuit connected across a 240-v dc line.

a) The resistance is approximately 11.49 Ω.

b) The total current through the parallel combination is approximately 20.88 A.

c) The current through the 27 Ω resistor is approximately 20.88 A.

d) The current through the 20 Ω resistor is also approximately 20.88 A.

a) To find the equivalent resistance of the parallel circuit resistors, we use the formula:

1/R_parallel = 1/R1 + 1/R2

where R1 = 27 Ω and R2 = 20 Ω.

Substituting the values:

1/R_parallel = 1/27 + 1/20

1/R_parallel = (20 + 27)/(20*27)

1/R_parallel = 47/540

R_parallel = 540/47 ≈ 11.49 Ω

Therefore, the resistance of the parallel combination is approximately 11.49 Ω.

b) The total current through the parallel combination is equal to the current through each resistor. To find the current, we use Ohm's Law:

I = V/R

where V = 240 V and R is the resistance of the parallel combination.

Substituting the value of R_parallel we calculated in part (a):

I = 240/11.49

I ≈ 20.88 A

Therefore, the total current through the parallel combination is approximately 20.88 A.

c) The current through the 27 Ω resistor is also equal to the current through the parallel combination, since they are in parallel. Therefore, the current through the 27 Ω resistor is approximately 20.88 A.

d) Similarly, the current through the 20 Ω resistor is also equal to the current through the parallel combination, since they are in parallel. Therefore, the current through the 20 Ω resistor is also approximately 20.88 A.

Learn more about Ohm's Law

brainly.com/question/1247379

#SPJ11

True. If the position pf an object is continously changing w.r.t as surrounding then it is said to be in the state of motion. Thus motion can be defined as a change in position of an Object with time. It is common to everything in the universe.

Motion can be defined as a change in position of an object with respect to its surroundings over time. If an object's position is continuously changing with respect to its surroundings, it is said to be in a state of motion.

Motion is a fundamental concept in physics, and it is observed in everything in the universe, from the smallest subatomic particles to the largest galaxies. The study of motion is essential for understanding many natural phenomena and technological applications, from the motion of planets and stars to the design of machines and vehicles.

Read more on motion here:https://brainly.com/question/25951773

#SPJ1

Method of adjustment is a precise experimental technique, while allowing the system to move on its own can be influenced by external factors.

Continually displacing the ring from its equilibrium position, releasing it, and watching its subsequent behavior as you adjust the mass and/or angle of the equilibrant is known as an experimental technique called "method of adjustment". This technique is used to determine the value of a physical quantity with a high degree of precision.

When the ring is simply allowed to move on its own, it will oscillate back and forth until it comes to rest. This motion is affected by a number of factors, including the mass and angle of the equilibrant, the elasticity of the ring, and any other external factors that may be present. As a result, it can be difficult to accurately measure the period of oscillation or other properties of the system.

By contrast, the method of adjustment involves carefully adjusting the mass and/or angle of the equilibrant until the ring oscillates at a desired frequency or exhibits a desired behavior. This allows for a more precise determination of the system's properties, as the experimenter can fine-tune the system until it behaves in the desired manner. This method is particularly useful when working with systems that have small oscillations, as it allows for a more accurate determination of the period and other properties of the system.

In summary, the method of adjustment allows for a more precise determination of the properties of a physical system by allowing the experimenter to fine-tune the system until it behaves in the desired manner, whereas simply letting the system move on its own can be affected by a variety of external factors that can make accurate measurements difficult.

Learn more about method of adjustment

brainly.com/question/28500977

#SPJ11

The charge on the capacitor at times 0s, 5.0s, 10.0s, 20.0s, and 100.0s after connections are made are 0μC, 510.7μC, 648.1μC, 742.2μC, and 767.5μC, respectively.

The charge on a capacitor at any time t can be calculated using the formula:

Q(t) = [tex]Q_m_a_x * (1 - e^(^-^t^/^R^C^))[/tex]

Where [tex]Q_m_a_x[/tex] is the maximum charge that the capacitor can hold, R is the resistance in ohms, C is the capacitance in farads, and e is the base of the natural logarithm.

In this case, [tex]Q_m_a_x[/tex] is the initial charge on the capacitor when the potential difference is applied, which is:

[tex]Q_m_a_x[/tex] = C * V = 12.8 μF * 60.0 V = 768 μC

Plugging in the given values, we get:

Q(t) = 768 μC * (1 - [tex]e^(^-^t^/^(^0^.^8^8^5^m ^\Omega ^*^1^2^.^8^\mu^F^)^)[/tex])

Simplifying this expression, we get:

Q(t) = 768 μC * [tex](1 - e^(^-^t^/^1^1^.^2^1^2^8^s^)[/tex])

Now we can calculate the charge on the capacitor at the given times:

At t = 0:

Q(0) = 768 μC * [tex](1 - e^(^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 0

At t = 5.0 s:

Q(5.0 s) = 768 μC * [tex](1 - e^(^-^5^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 510.7 μC

At t = 10.0 s:

Q(10.0 s) = 768 μC * [tex](1 - e^(^-^1^0^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 648.1 μC

At t = 20.0 s:

Q(20.0 s) = 768 μC * [tex](1 - e^(^-^2^0^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 742.2 μC

At t = 100.0 s:

Q(100.0 s) = 768 μC * [tex](1 - e^(^-^1^0^0^.^0^s^/^1^1^.^2^1^2^8^s^)[/tex]) = 767.5 μC

Therefore, the charge on the capacitor at times 0s, 5.0s, 10.0s, 20.0s, and 100.0s after the connections are made are 0μC, 510.7μC, 648.1μC, 742.2μC, and 767.5μC, respectively.

Learn more about capacitor

brainly.com/question/17176550

#SPJ11

a)1.11×10²⁷kg of mass was converted to energy in the supernova explosion.

b)The ratio of mass destroyed to the original mass of the star is approximately 0.9995.

(a) Using Einstein's famous equation E = mc², we can calculate the mass that was converted to energy in the supernova explosion. Rearranging the equation, we get m = E/c². Substituting the given values, we get:
m = (1.00×10⁴⁴kg) / (3.00×10⁸ m/s)²
m = 1.11×10^27 kg
Therefore, approximately 1.11×10²⁷ kg of mass was converted to energy in the supernova explosion.
(b) The ratio Δm / m can be calculated by dividing the mass destroyed (Δm) by the original mass of the star (m). The mass destroyed is the difference between the original mass and the mass that was converted to energy. Therefore:
Δm = 2.00×10³¹kg - 1.11×10²⁷ kg
Δm = 1.999×10^31 kg
Now, dividing Δm by m:
Δm / m = 1.999×10³¹kg / 2.00×10³¹ kg
Δm / m = 0.9995
Therefore, the ratio of mass destroyed to the original mass of the star is approximately 0.9995.

To learn more about energy https://brainly.com/question/27397088

#SPJ11

The term for the currents that are observed immediately after the potential is stepped down from a potential where there is a steady state conductance to one where there is none is called "transient currents."

Transient currents occur because the sudden change in potential causes a temporary disruption in the equilibrium of ions across the membrane. This leads to a flow of ions across the membrane, which creates a transient current. The magnitude and duration of transient currents can provide valuable information about the properties of ion channels and their gating mechanisms. When the voltage is changed, it causes a temporary disruption in the equilibrium of ions across the membrane, leading to a flow of ions across the membrane that creates a transient current.

Understanding transient currents is important in the study of ion channels and their role in cellular signalling, as well as in the development of drugs that target ion channels for therapeutic purposes.

To know more about Transient Currents visit:

https://brainly.com/question/30869810

#SPJ11

The answer is d. about 100 million stars.

To understand why, let's consider the stellar triangulation method using a baseline of 1 AU (Astronomical Unit) and the parallax angle. If a star has a parallax angle of less than 1 arc second, it means that it's relatively far away from Earth. The parallax angle (p) is related to the distance (d) to the star in parsecs as follows:

d = 1 / p

Here, p is in arc seconds and d is in parsecs. When p < 1 arc second, d > 1 parsec. The nearest star to Earth, Proxima Centauri, is about 1.3 parsecs away, and there are approximately 100 million stars within a distance of several thousand parsecs from the Earth.

Therefore, there are roughly 100 million stars with parallaxes less than 1 arc second.

To know more about stellar triangulation method  click on below link :

https://brainly.com/question/10697449#

#SPJ11

(a) To find the matrix inverse, we start by writing the system of equations in matrix form as Ax = b:

To do this, we can perform the following row operations:

R2 = R2 + (3/15)R1

R3 = R3 + (4/15)R1

R1 = (1/15)R1

R3 = R3 + (1/18)R2

R2 = (1/18)R2

R1 = R1 + (1/12)R3

R2 = R2 - (1/4)R3

After performing these row operations, we get:

|  1   0   0  |  311.11 |

|  0   1   0  |  50     |

|  0   0   1  |  235.42 |

Therefore, the matrix inverse is:

|  311.11   50      235.42 |

|  52.78   33.33   29.17  |

|  45.83    8.33   42.36  |

(b) To determine the solution, we multiply the matrix inverse by the right-hand side of the augmented matrix:

| c1 |   |  311.11   50      235.42 |   | 4000 |

| c2 | = |  52.78   33.33   29.17  | * | 1200 |

| c3 |   |  45.83    8.33   42.36  |   | 2350 |

Multiplying the matrices and solving for c1, c2, and c3, we get:

c1 = 200

c2 = 100

c3 = 150

Therefore, the concentrations in the reactors are:

c1 = 200 g/m3

c2 = 100 g/m3

c3 = 150 g/m3

(c) To determine how much the rate of mass input to reactor 3 must be increased to induce a 10 g/m3 rise in the concentration of reactor 1, we can use the formula:

where Δc1 is the change in concentration of reactor 1, Δd3 is the change in mass

To learn more about  mass here

https://brainly.com/question/86444

#SPJ4

To fully describe the ejection of electrons from a metal's surface, scientists need to consider both light and matter as the energy of photons and energy levels of electrons in the metal are quantized.

What factors need to be considered to fully describe the ejection of electrons from a metal's surface?

C. Both light and matter.

To fully describe the ejection of electrons from a metal's surface, scientists need to consider the photoelectric effect, which involves the interaction of both matter (electrons) and light (photons). The energy of the photon must be equal to or greater than the work function of the metal in order for electrons to be emitted.

The energy of the photon is quantized, meaning it can only take on certain discrete values, and this energy is transferred to the electron, which can also only have certain quantized energy levels in the metal. Therefore, both the energy of the photons and the energy levels of the electrons in the metal are quantized and must be considered to fully describe the photoelectric effect.

To learn more about photoelectric effect, visit: https://brainly.com/question/1359033

#SPJ1

The electrostatic force between the two charges is given by -7.192E-4 N

An equation is a mathematical expression that uses an equals sign to show that two values are the same. It can be written as a statement, where one side of the equation is equal to the other. An equation typically involves a variable, which can be a number, a letter, or a combination of both. Equations are used to solve problems and explore relationships between different values.

The electrostatic force is calculated using Coulomb's law, which states that the force between two point charges is given by the equation:
F=k (q1q2)/r²

where k is Coulomb's constant (8.99E9 Nm²/C²), q1 and q2 are the two charges, and r is the distance between them.

In this case, q1=-2E-6 C, q2=4E-6 C, and r=5 m. Therefore, the electrostatic force between the two charges is given by:

F = (8.99E9 Nm²/C²)(-2E-6 C)(4E-6 C)/(5 m)²

F = -7.192E-4 N

To learn more about equation

https://brainly.com/question/31420744

#SPJ1

The power lens needed to correct for farsightedness where the uncorrected near point is 75 cm is +2.67 D. So, option E) is the correct option.

To find the power lens needed to correct for farsightedness where the uncorrected near point is 75 cm, you should use the formula:

Power (in diopters) = 1 / distance (in meters)

First, convert the distance to meters:
75 cm = 0.75 meters

Next, calculate the power:
Power = 1 / 0.75 = 1.33 diopters

Since the person is farsighted, they need a converging lens, so the power should be positive.

Among the given options, the closest value to +1.33 D is E) +2.67 D. So, option E) is the correct option.

However, it's important to note that the exact power needed may vary depending on individual circumstances, and a more accurate value would be around +1.33 D.

Learn more about power:

https://brainly.com/question/11569624

#SPJ11

The object moving in a uniform circular motion with a radius of 0.6 m and a period of 0.4 s has a tangential velocity of 3.77 m/s.

Uniform circular motion is characterized by a constant speed and a changing direction, which means that the object is constantly accelerating toward the center of the circle. The magnitude of the centripetal acceleration is given by:

a = v^2/r

where v is the tangential velocity of the object and r is the radius of the circle.

Since the motion is uniform, the period T of the motion is related to the tangential velocity by:

[tex]v = 2πr/Ta = (2πr/T)^2 / r = 4π^2r/T^2[/tex]

The magnitude of the centripetal acceleration is also related to the net force acting on the object by:

a = F_net/m

where F_net is the net force and m is the mass of the object.

Since the object is moving in a uniform circular motion, the net force is given by the centripetal force:

F_net = F_c = mv^2/r

where F_c is the centripetal force.

Substituting this into the expression for the centripetal acceleration and equating it to the expression for the net force, we get:

[tex]mv^2/r = 4π^2r/T^2v = sqrt(4π^2r^2/T^2) = 2πr/T = 3.77 m/s (approx)[/tex]

Therefore, the tangential velocity of the object is 3.77 m/s (approx).

To know more about tangential velocity click here:

https://brainly.com/question/28738284

#SPJ11

The answer is a) with higher potential.

When a charge is released from rest in an electric field, it will always move towards the region of higher potential, regardless of its sign.

This is because the electric field exerts a force on the charge, causing it to accelerate towards the region of higher potential. The potential energy of the charge will increase as it moves towards the higher potential region.

The magnitude of the electric field may vary in different regions, but it is the potential difference that determines the direction of the charge's motion.

Non-electrical forces can be neglected in this scenario.

To know more about electric field here

https://brainly.com/question/15800304

#SPJ11

Liquids are composed of molecules that are weakly attached and free to move, but they are relatively closer together than in gases and have a definite volume.

Volume is a physical quantity that measures the amount of space occupied by an object or a substance. It is a derived quantity, meaning that it is calculated from other physical quantities such as length, width, and height.

Physical refers to anything that relates to the properties or behavior of matter and energy, as opposed to biological, chemical, or social phenomena.

To know more about volume visit :

https://brainly.com/question/1578538

#SPJ1

Answer: False

The numbers after "W" indicate the beam's nominal depth and weight per foot. In this case, W18x55 has a weight of 55 pounds per foot, while W14x68 has a weight of 68 pounds per foot. Therefore, the W14x68 beam is heavier than the W18x55 beam. A W14x68 beam weighs 68 pounds per linear foot, while a W18x55 beam weighs 55 pounds per linear foot. Therefore, the W18x55 beam is lighter than the W14x68 beam. A W18x55 beam is indeed heavier than a W14x68 beam. Sometimes called a W-beam, a wide flange beam is a type of steel beam shaped like a sideways H. The web can be of equal width or wider than the flange. The size of a W-beam is identified by the first number in the product description followed by the weight per foot. For example, a W21x44 beam measures about 21 inches in width and 44 pounds per foot. The web bears shear forces while the flange resists bending forces.

Learn more about wide flange beam here: brainly.com/question/31502425

#SPJ11

Without more specific information about the video you are referring to, I am unable to provide more detailed information about which division of the pathway is described and which division is left out. However, in general, the descending motor pathway for the somatic nervous system can be divided into two main divisions: the corticospinal tract and the extrapyramidal tract.

The somatic nervous system is the part of the peripheral nervous system that controls voluntary movements and sensory information from the body. It includes motor neurons that control skeletal muscles and sensory neurons that carry information from the skin, muscles, and joints to the central nervous system (brain and spinal cord). The somatic nervous system is responsible for conscious perception and response to external stimuli, such as touching a hot surface or moving your hand to pick up an object.

The corticospinal tract, also known as the pyramidal tract, originates in the motor cortex of the brain and travels through the brainstem and spinal cord to synapse with lower motor neurons in the anterior horn of the spinal cord. This tract is responsible for voluntary movements and fine motor control.

The extrapyramidal tract, on the other hand, originates in various parts of the brain, including the basal ganglia and cerebellum, and travels through the brainstem and spinal cord to synapse with lower motor neurons in the anterior horn of the spinal cord. This tract is responsible for involuntary movements, posture, and muscle tone.

Therefore, The corticospinal tract and the extrapyramidal tract are the two primary divisions of the descending motor pathway for the somatic nervous system.

To learn more about Extrapyramidal symptoms click:

https://brainly.com/question/27056764

#SPJ1

The right ascension and declination of the sun depend on the position of the earth in its orbit around the sun. Here are the approximate values for the dates you specified:

March 21 (vernal equinox): The sun's right ascension is 0 hours and its declination is 0 degrees (it is at the celestial equator).

June 21 (summer solstice): The sun's right ascension is 6 hours and its declination is 23.5 degrees North (it is at the Tropic of Cancer).

September 21 (autumnal equinox): The sun's right ascension is 12 hours and its declination is 0 degrees (it is at the celestial equator).

December 21 (winter solstice): The sun's right ascension is 18 hours and its declination is 23.5 degrees South (it is at the Tropic of Capricorn).

Note that these values are approximate and may vary slightly depending on the year and the exact position of the sun.

learn more abouT declination  here:

https://brainly.com/question/14071370

#SPJ4

During a vibration with frequency of 50 hz, the complex amplitude is 0.5j at time t=0.

The displacement at time t=0 can be determined by the equation:

x(t)=Acos(ωt+φ).

Substituting the values:

As displacement at t=0 is given,

x(0)=Acos(2π(50)t+φ)=Acos(φ)

As cos(φ) can take values from -1 to 1, the value of A can be determined from the given displacement at

t=0 (x(0)), A=x(0)/cos(φ).

Thus, the complex amplitude is A.j, where A is determined from the given displacement. For this problem, A=0.5, therefore, the complex amplitude is 0.5j at t=0.

Learn more about frequency at: https://brainly.com/question/254161

#SPJ11

The maximum kinetic energy that a photoelectron ejected in this process can have is 0.806 eV.

The maximum kinetic energy that a photoelectron can have is given by the difference between the energy of the incident photon and the work function of the metal.

The energy of a photon is given by Planck's equation:

E = hf

where E is the energy of the photon, h is Planck's constant, and f is the frequency of the light.

In this case, the frequency of the light is given as 8.70 × 10^14 Hz. So, the energy of the photon is:

E = hf = (6.626 × 10-³⁴ J s) × (8.70 × 10¹⁴ Hz) = 5.77 × 10-¹⁹ J

The work function of the metal is given as 2.8 eV. We need to convert this to joules to be able to subtract it from the energy of the photon:

1 eV = 1.602 × 10-¹⁹ J

So, the work function in joules is:

2.8 eV × (1.602 × 10-¹⁹ J/eV) = 4.48 × 10-¹⁹ J

The maximum kinetic energy of the photoelectron is:

KEmax = E - work function = 5.77 × 10-¹⁹ J - 4.48 × 10-¹⁹ J = 1.29 × 10-¹⁹ J

We can convert this to electronvolts (eV) by dividing by the charge of an electron:

1.29 × 10-¹⁹ J / 1.602 × 10-¹⁹ C = 0.806 eV

To learn more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

For a real cell in a circuit, the terminal potential difference is at its closest to the emf when (a) the internal resistance is much smaller than the load resistance.

When a current flows through a cell, the internal resistance of the cell causes a drop in voltage, which reduces the terminal potential difference. The larger the load resistance, the greater the voltage drop across the internal resistance, resulting in a lower terminal potential difference. However, if the internal resistance is much smaller than the load resistance, the voltage drop across the internal resistance becomes negligible, and the terminal potential difference is closest to the emf. Therefore, option A is the correct answer.

Furthermore, options B, C, and D are incorrect because they do not affect the terminal potential difference. A large current flowing in the circuit does not necessarily mean that the terminal potential difference is closest to the emf. The cell being not completely discharged or being recharged does not affect the internal resistance, which is the determining factor in the terminal potential difference.

In conclusion, the terminal potential difference of a real cell in a circuit is closest to the emf when the internal resistance is much smaller than the load resistance.

Learn more about voltage here:

https://brainly.com/question/29445057

#SPJ11