Let p be the total linear momentum of the system before the collision and p' the total linear momentum of the system after the collision. Let p₁₁ and p₁₄ be the linear momentum of the 11.0kg ball and the 14.0kg ball before the collision, and let p₁₁' and p₁₄' be their linear momenta after the collision.
According to the Law of Conservation of Linear Momentum, the total linear momentum of the system before and after the collision remains the same. Then:
[tex]\begin{gathered} p=p^{\prime} \\ \Rightarrow p_{11}+p_{14}=p_{11}^{\prime}+p_{14}^{\prime} \end{gathered}[/tex]Let v be the unknown speed of the 11.0kg ball after the collision. Find the value of p₁₁, p₁₄, and p₁₄'. Find an expression for p₁₁' in terms of v and replace all the values into the above equation. Solve for v.
The linear momentum of a particle with mass m and velocity v is:
[tex]p=mv[/tex]Then:
[tex]\begin{gathered} p_{11}=(11kg)(13.0\frac{m}{s})=143kg\cdot\frac{m}{s} \\ \\ p_{14}=(14kg)(22.0\frac{m}{s})=308kg\cdot\frac{m}{s} \\ \\ p^{\prime}_{11}=(11kg)\cdot v \\ \\ p^{\prime}_{14}=(14kg)(16.2\frac{m}{s})=226.8kg\cdot\frac{m}{s} \end{gathered}[/tex]Then:
[tex]\begin{gathered} p_{11}+p_{14}=p_{11}^{\prime}+p_{14}^{\prime} \\ \\ \Rightarrow143kg\cdot\frac{m}{s}+308kg\cdot\frac{m}{s}=(11kg)\cdot v+226.8kg\cdot\frac{m}{s} \\ \\ \Rightarrow143kg\cdot\frac{m}{s}+308kg\cdot\frac{m}{s}-226.8kg\cdot\frac{m}{s}=(11kg)\cdot v \\ \\ \Rightarrow224.2\cdot\frac{m}{s}=(11kg)\cdot v \\ \\ \Rightarrow v=\frac{224.2kg\cdot\frac{m}{s}}{11kg}=20.381818\ldots\frac{m}{s} \\ \\ \therefore v\approx20.4\frac{m}{s} \end{gathered}[/tex]Therefore, the velocity of the first ball after the collision is 20.4m/s.
X 24. A man drives a car and records the distance he travels on a distance- *0/2
time graph. At one point he gets stuck in traffic and does not move for
one hour. This point on the graph the slope will be horizontal. Why is this correct?
The distance-time graph will show the slope as horizontal for the time in which the man don't move.
How to find slope of a graph?
The slope formula rise/run is used to get the slope from a graph. The first thing we must do when given a line's graph and asked to determine its equation is to determine its slope. In order to determine the slope from a graph, we can take any two points on the line (x1, y1) and (x2, y2) and use the formula (y2 - y1) / (x2 - x1).
In the distance-time graph the distance is represented at y-axis and the time is represented at x-axis. So, In the time in which the man stops moving (stuck in the traffic) there is no change in distance but the times keeps changing or increasing that's why at the point he gets stuck in traffic and does not move for one hour. This point on the graph the slope will be horizontal.
To know more about slope of a graph, go to link
https://brainly.com/question/19376563
#SPJ9
__________________________1. She is caught in a wind that blows toward the
equator from about 30° N and 30° S of the
equator. She is in the_______________
This is science
She is caught in a wind that blows toward the equator from about 30° N and 30° S of the equator. She is in the trade wind. This science is called Hadley cell.
How is a wind that blows from the north and south of the equator a trade wind?It follows the movement of wind blows from one direction to the other such as the one which blow from north to south or east to west. The trade wind are produced by warm moist air rising near the equator.
Now, within the context of the task given above, when the movement wind which blows toward the equator from about 30° N and 30° S of the equator is known as the trade wind.
So therefore, the movement of wind from the same certain degrees from North and South is called trade wind.
Read more on wind:
https://brainly.com/question/2675036
#SPJ1
You are instructed by your supervisor to move 20 boxes—each of which has a weight of 11.34 N—onto an awaiting truck. The back of the truck is 1.65 m above the loading dock. How much work must you perform to do your assignment?
The amount of work done to move 20 boxes each of weight 11.34 N onto an awaiting truck with back 1.65 m above the loading dock is 374.22 Joule.
Work done is calculated by the product of total force and displacement.
According to the question, total force done to lift the boxes is twenty times the weight of each box. So, the force required to lift all the blocks is,
Force = 20 × 11.34 = 226.8 N
As the back of the truck is 1.65 m above the loading dock, displacement done to move the boxes is 1.65 m.
So, the work done is,
Work = 226.8 × 1.65 = 374.22 Joule
Learn about the elements necessary to accomplish the work at:
https://brainly.com/question/13988204
#SPJ1
anne is working on a research project that involves the use of a centrifuge. her samples must first experience an acceleration of 100???? , but then, the acceleration must increase by a factor of eleven. by how much will the rotational speed have to increase? express your answer as a fraction of the initial rotation rate.
if the final acceleration increases by a factor of 11, then the final rotation should be 3.32[tex]w_{1}[/tex] times the initial rotation.
The relation between the centripetal acceleration and rotation speed of the particle is given as
a=rω²
Where ω is the angular speed and r radius of the circle
Now, rearranging the above equation we will get
ω = √[tex]\frac{a}{r}[/tex]
The initial acceleration is given by
a₁ =100g
But then, the acceleration increases by a factor of 11. Which means the final acceleration of the particle is
a₂ = 11 (100g)
= 1100g
The final and initial rotation speeds are related as
[tex]\frac{w1}{w2}[/tex] = √[tex]\frac{a2}{a1}[/tex]
[tex]w_{2}[/tex] = √[tex]\frac{1100g}{100g}[/tex] x [tex]w_{1}[/tex]
[tex]w_{2}[/tex] = 3.32 [tex]w_{1}[/tex]
The final rotation should be 3.32[tex]w_{1}[/tex] times the initial rotation.
If you need to learn more about acceleration click here:
https://brainly.com/question/25749514
#SPJ4
Find the x -component of vector a⃗ = (7.0 m/s2 , −y -direction).
The y-component of vector (a ) is -7.0j m/s²
In science, anything that has both a direction and a magnitude is referred to as a vector. They are typically represented by pointing arrows, the length of which denotes the size of the vector. The direction is then crucial in accordance with the vector.
We are given that,
the x -component of vector (a)x = 7.0m/s²
The acceleration in vector sum form x - direction and y - direction is given as,
[tex]a = a_{x} +a_{y}[/tex]
So that , the (-y-direction) acceleration then x- component must be zero then,
[tex]a =(7.0i) + (-7.0j)\\a= - 7.0j[/tex]
Thus, the acceleration on -y- direction will be -7.0jm/s²
To know more about vector
https://brainly.com/question/11238162
#SPJ1
A girl is outside walking on level ground. First she walks 829 m to the east, then 223 m north, and finally 387 m west. What is the magnitude of her displacement? Give your answer in meters correct to at least 1 decimal place. Do not include units in your answer.
Answer:
not enough information need more information to answer the question
An arrow is launched straight up from the ground with an initial velocity of 23.4m/s how long until it reaches its highest point
Answer:
t = 2.388 seconds
Explanation:
Initial velocity is 23.4 m/s
At the highest point, the velocity will be 0 m/s
We can use the equation
[tex]v = u+at[/tex]
V is the final velocity at the highest point
U is the initial velocity
A is the gravity pulling down on the ball
T is the time in seconds
We plug in the numbers
[tex]0 = 23.4 - 9.8t[/tex]
[tex]t = 2.387755102[/tex]
replace the force system acting on the post by a resultant force, and specify where its line of action intersects the post ab measured from point b. (10 points)
The resultant force is the force that can replace all the acting forces and have a comparable effect on the section or beam when several forces are acting on it.
If the forces acting on a body in a specific direction result in a net sum of zero in that direction, the forces acting on the body are said to be in equilibrium.
The resultant force is the force that can replace all other forces operating on a beam or section while still having the same impact on the section or beam. This force is used when many forces are acting on a beam or section.
The resultant force in the X direction equals 250 and must act for more than five, minus 500 cosign 30 minus 300, which equals 533.41 Newton and the magnitude of the forces in the left direction. The magnitude of the resultant force in the y direction should likewise be the same. S
ome forces that are equal to 500 sign 30 - 150 in the y direction. multiply it by 3/5 so that it equals 100. Newton's are inefficient, thus the force Rf's magnitude should be square root off 533.1 square lost 100 square, equaling 542 Newtons, and the angle Sita if 10 members 100 over 533.41, equal to 10.6 degrees for the location off.
We have 533.1 when we multiply the equal 500 committed by the result on force So instant off the resultant around the. 30 supply point to minus 250 and multiplied by minus 500. city above five, apply.
Subtract 200 50 from 0.5. Divide by 4/5. Loss of three supplies A 300 must submit one. Therefore, using this equation, we can determine T's value, which is 827 millimeters.
To know more about force click on the link:
https://brainly.com/question/13191643
#SPJ4
a rigid bar with mass m, length l, and a uniformly distributed positive charge q is free to pivot about the origin in the presence of a spatially uniform electric field e⃗
a. V(y)=V-E(y) b. U=vq-1/2QEL.cosФ c. V=EL/2 d. angular speed of the bar as it passes Ф=0° is W=[tex]\sqrt{3QE/ML}[/tex]
You were already familiar with the ideas of velocity and speed. The idea of angular speed and velocity, however, is what needs to be understood in terms of physical numbers. Angular motion is the term for when an item is expected to travel along a circular path while making a specific angle. The idea of angular speed and angular velocity is derived from the object's angular motion. Let's examine these ideas in greater depth. Assuming you are rotating a ball in a circular orbit, the angular speed can be defined as follows.
A body's rate of angle change over time as it rotates in a circular orbit is known as its angular speed. The definition of angular velocity is similar to that of linear velocity when an object is moving with some speed in a circular orbit.
Learn more about angular speed here:
https://brainly.com/question/15584705
#SPJ4
A cougar with a mass of 80 kg is standing at the edge of a cliff. Find the cougar's potential energy if the cliff is 70 m high. show your work !!!
The potential energy of the 80kg cougar at a height of 70m is 54880 Joules.
What is the potential energy of the cougar?Potential energy is simply the energy a body possesses due to its position.
It is expressed mathematically as;
P.E = mgh
Where m is mass, h is height and g is acceleration due to gravity ( g = 9.8m/s² )
Given the data in the question;
Mass of the cougar m = 80kgHeight h = 70mPotential energy P.E = ?Plug the given values into the potential energy formula above and solve.
P.E = mgh
P.E = 80kg × 9.8m/s² × 70m
P.E = 54880kgm²/s²
P.E = 54880 Joules.
Therefore, the potential energy of the cougar is 54880 Joules.
Learn more about potential energy here: https://brainly.com/question/11749818
#SPJ1
a cylinder of mass m slides down from rest in a vertical tube whose inner surface is covered by a viscous oil of film thickness h. if the diameter and height of the cylinder are d and l, respectively, derive an expression for the velocity of the cylinder as a function of time, t. discuss what will happen as t → [infinity]. can this device serve as a viscometer?
When there is relative motion between the fluid layers or between the fluid and solid surface, the fluid's internal property known as viscosity is created. This relative motion is being resisted by viscosity.
Derivations of the equations of motion—the connections for the conservation of mass and momentum—in rectangular,
coordinates that are spherical and cylindrical. The entire body of experimental data suggests that the fundamental equations of fluid mechanics are in fact those listed below, and that they apply to any circumstance where a Newtonian fluid is flowing, in theory.
Viscosity, a characteristic of fluids, is produced when there is relative motion between the fluid layers or between the fluid and solid surface. Viscosity prevents this relative motion from happening.
Unfortunately, due to their all-encompassing nature, their analytical solution is challenging or impossible unless the circumstances are quite straightforward.
However,
These "Navier-Stokes equations" must be understood for the following reasons.
reasons:
1. They result in the analytical and precise resolution of some basic yet significant problems.
issues.
2. They serve as the foundation for additional chemical engineering research in various fields.
3. A few reasonable simplification assumptions can frequently result in
for many engineering problems, approximation solutions are eminently acceptable purposes. Typical examples can be found in the study of boundary layers, the use of films to cover substrates, waves, lubrication, and inviscid (irrotational) flow.
To know more about viscosity click on the link:
https://brainly.com/question/2193315
#SPJ4
Two electromagnetic waves are traveling through a material. Wave 1 has a maximum electric field strength that is three times the maximum field strength of wave 2. How do the average intensities of the waves compare?.
Wave 1's intensity is nine times greater than Wave 2's. An electromagnetic wave carries both magnetic and electric energy when it moves.
What is electromagnetic waves?An electromagnetic wave carries both magnetic and electric energy when it moves. Both waves contribute equally to the energy of electromagnetic waves. It is assumed that wave 1 has an electric field E that is three times greater than wave 2's maximal electric energy E'.
Thus, we can state:
E/E' = 3
We are aware,
The wave's intensity is determined by,
I = 1/2eE²c
Where,
I represents the wave's power,
e is a free space permittivity,
E represents the wave's energy.
The speed of light is c.
the strength of wave 1 right now
I1 = 1/2eE1²c
second wave
I2 = 1/2eE²c
Currently, dividing the two intensities,
I1/I2 = E1²/E2²
We are aware,
E/E' = 3
So,
I1/I2 = 9
I1 = 9I2
Thus, we can state:
Wave 1's intensity is nine times greater than Wave 2's.
To learn more about electromagnetic waves refer to:
https://brainly.com/question/25847009
#SPJ4
If it takes 20 N to move a box, how much power will be needed to move the box a distance of 5meters in 5 seconds?
Answer:
It will need 20 Watts power to move the box 5 meters in 5 seconds.
Step-by-step explanation:
The power is defined as the work per unit time or the rate of doing work:
W=dL/dt
Where de work L, can be calculated by multiplying the force by the displacement d:
L=F.d
To this example, F and D are known, therefore the work is:
L=20N . 5m=40 Nm
We know that the work is doing within a time of 5 seconds:
W= 40 Nm / 5s = 20 Nm/s = 20 Watts
electromagnetic radiation with a maximum wavelength of 540 nm(5.4×10−7 m) is needed for the study of the photoelectric effect in potassium atoms. what is the approximate frequency that corresponds to this wavelength?
At a speed of two times ten to the eighth and violent. 5, 40 times 10 to the power -9 meters is written as. This leads to the conclusion that frequency F is equivalent to 5.6 times. Turn 14 times every second. Therefore, the given electromagnetic radiation requires this frequency.
In this problem, we have a given violent electromagnetic radiation, and we need to determine the frequency that corresponds to that violent electromagnetic radiation.
The chosen wavelength is lambda. I called at five minutes and forty nanometers—540 times 10 to the power—or nine meters. Considering that one nanometer equals 10 to the power -9 meters. Now, sea upon lambda finds frequency.
The value of C is three in 2, ten to the power eight meters per second, violent, and the speed of light in a vacuum. 5, 40 times 10 to the power -9 meters is written as. This leads to the conclusion that frequency F is equivalent to 5.6 times. Turn 14 times every second. Therefore, the given electromagnetic radiation requires this frequency.
To know more about electromagnetic radiation click on the link:
https://brainly.com/question/10759891
#SPJ4
Heat waves are defined by the difference in temperature compared to the normal _________ typical of a region.
The difference in temperature from the average temperature for a region defines a heat wave.
A heat wave is an extended period of unusually hot weather that usually lasts longer than days.
Heat waves can occur in both low and high humidity conditions. They have the capacity to cover a wide area, exposing too many people to harmful heat.
An extremely dangerous weather event known as a heat wave occurs when temperatures rise considerably above 90° F. Due to the extreme heat and high humidity levels, an area becomes extremely warm for an extended period of time.
Visit to learn more about temperature :
brainly.com/question/2339046
#SPJ4
rank the capacitors on the basis of the charge stored on the positive plate. rank from largest to smallest. to rank items as equivalent, overlap them.
if you are on top of mount Everest and do a small hop without moving forward, would you still be pulled down by gravity? explain it and also answer my other newest question.
Explanation:
Gravity would still pull you down although it wouldn't affect you as much because there is less gravitational pull in high places such as Mt. Everest.
consider a resistor-inductor circuit where a 10v force is applied for a period of 2 seconds. the equation for the current in the circuit is given: \f$\displaystyle \small \frac{di}{dt} 5i
A step function is defined U(t)=0,1 [tex]\left \{ {{t < 0} \atop {t > 0}} \right.[/tex] i(t)=e^-5t + 2 if t=2&3 & i(t)=3e^-5t if 2>t>3.
A step function, sometimes known as a staircase function, is a piecewise constant function with a limited number of parts, according to the definition given in mathematics. In other words, one can think of a function on the real numbers as a finite linear combination of indicator functions of given intervals. In addition, it goes by the names floor function and biggest integer function. There is no continuity in the step function. In mathematics, a step function is a function whose graph resembles a series of steps because it is made up of numerous horizontal line segments interspersed with jumps. The biggest integer function is a frequent illustration of step functions in mathematics.
When provided intervals are used, a step function has a constant value, but the constant varies for each interval. A function that returns the biggest integer that is less than or equal to x is known as the greatest integer function.
Learn more about Step function here:
https://brainly.com/question/12701460
#SPJ4
Your community is considering building a dam on a nearby river to reduce flooding. Would you support this proposal? Explain.
I need to get it done right now
Your community is considering building a dam on a nearby river to reduce flooding. yes, this proposal need support. because through dam we can store flood water.
What is a dam?A physical barrier known as a dam slows or limits the flow of surface or subsurface water. Reservoirs built by dams provide water for navigation, aquaculture, irrigation, human consumption, industrial use, and other purposes.
What is the use of dam?Let's examine some of a dam's uses now that we have a basic understanding of what a dam is. It is valued as a resource for water. They provide water for a variety of uses, including home, agricultural, and industrial ones. Dams are also utilised to produce energy and improve river transportation. Dams are used more and more frequently in daily life. Dams also promote local tourism, which contributes to the growth of the nation. Dams can be used for many different things.
Learn more about dam here :
brainly.com/question/29315
#SPJ13
what is temperature?
how temperature can be measured
Answer:
Temperature is the kinetic energy of the particles of a substance.
Explanation:
The more kinetic energy a particle has the higher it's temperature. In the case of the atmosphere, which is what we are primarily concerned with in Meteorology, we measure this using a mercury thermometer (in certain situations we use an alcohol thermometer and of course modern times have given us things like dewcells and digital thermometers but we always go back to the mercury thermometer for accuracy).
A rod pr is balanced on a pivot at the end r while a string is used to support the rod at p. the weight of the rod is 9n, acts at a point q where qr=30cm and pq=15cm. the tension in the string is
The tension in the string if a rod PR is balanced on a pivot at the end R while a string is used to support the rod at P is 6 N
Moment = Force * Perpendicular Distance
Let us consider the pivot side be initial point,
Since the rod is balanced,
CM = ACM
CM = Clockwise moment
ACM = Anticlockwise moment
F = 9 N
PQ = 15 cm = 0.15 m
QR = 30 cm = 0.3 m
PR = PQ + QR
PR = 0.15 + 0.3
PR = 0.45 m
CM = W * QR
CM = 9 * 30
CM = 2.70 N m
ACM = T * PR
ACM = 0.45 T N m
2.70 = 0.45 T
T = 6 N
Therefore, the tension in the string is 6 N
To know more about Moment
https://brainly.com/question/22594240
#SPJ1
gas giants have many moons than terristcal planets due to having higher ___ ?
Gas giants have more moons than terrestrial planets due to having higher masses.
What are giant planets?Giant planets are composed of low boiling point substances rather than other solid substances but massive solid planets can also exist. There are four giant planets in the Solar System i.e. Jupiter, Saturn, Uranus, and Neptune. They are composed of hydrogen and helium atom i.e. Jupiter and Saturn whereas Uranus and Neptune are composed of ice, rock, hydrogen, and helium.
The giant planets have more moons as compared to the terrestrial planets because of their big masses which leads to stronger gravitational fields. Giant planets also occupy greater space and have larger volumes of mass in their surrounding atmosphere.
So we can conclude that due to having higher masses, Gas giants have many moons as compared to terrestrial planets.
Learn more about planets here: https://brainly.com/question/13106554
#SPJ1
17. A ball rolls off a lab table at 5 m/s horizontally. The table is 1.2 meters tall.
a. How long is it in the air?
b. How far from the table does it hit the ground?
c. What are the x and y speeds just before it hits the ground?
The ball is in the air for 0.24 seconds, the ball hits the ground 2.46 meters far from the table and the x speed is 0m/s and y speed is 5m/s.
Velocity of the ball is 5m/s and the height of the table is 1.2 meters.
a. We know,
Velocity = distance/time
5 = 1.2/time
Time = 1.2/5
Time = 0.24 seconds.
The time taken by the ball to reach the ground is 0.24 seconds.
b. The ball after rolling of the table will behave like Horizontal projectile.
Horizontal range R formula,
R = V.√(2h/g)
Putting all the values,
R = 5.√(2×1.2/9.8)
R = 5×0.49
R = 2.46 meters.
c. When the ball reaches the ground,
X speed is 0m/s and Y speed is 5m/s.
To know more about horizontal projectile, visit,
https://brainly.com/question/19443942
#SPJ1
On the kickoff, the football was in the air for 4 seconds before hitting the ground 52 meters away. How fast did the ball leave the foot of the kicker?
The initial speed that the ball left the foot of the kicker if it was in the air for 4 seconds before hitting the ground 52 meters away is 23.64 m / s
T = 2 u sin θ / g
R = u cos θ * T
T = Total time of flight
u = Initial velocity
g = Acceleration due to gravity
R = Horizontal range
T = 4 s
R = 52 m
4 = 2 u sin θ / 9.8
u = 39.2 / 2 sin θ
u = 19.6 / sin θ → ( 1 )
52 = u cos θ * 4
u = 13 / cos θ → ( 2 )
Equating ( 1 ) and ( 2 ),
19.6 / sin θ = 13 / cos θ
sin θ / cos θ = 19.6 / 13
tan θ = 1.5
θ = 56.3°
From ( 2 )
u = 13 / cos 56.3°
u = 13 / 0.55
u = 23.64 m / s
Therefore, the initial speed that the ball is 23.64 m / s
To know more about Horizontal range of projectile
https://brainly.com/question/23827445
#SPJ1
Is the exoplanet like earth in terms of its distance from its star? Explain your answer
Every planet in the solar system orbits the Sun. Planets known as exoplanets orbit other stars. Astronomers search for exoplanets by observing the effects that these planets have on the stars they orbit.
What is the exoplanet?Any planet outside of our solar system is an exoplanet. The majority of exoplanets orbit other stars, while rogue planets—free-floating exoplanets that are unattached to any star—orbit the galactic center.
Does the exoplanet have life?Since liquid water is necessary for all known forms of life, an exoplanet that is too near or too far from its host star is less likely to support life. Additionally, some primordial compounds may require ultraviolet light to form, but a hyperactive host star can blast the nascent planet, removing its atmosphere.
To know more about Exoplanet visit:
https://brainly.com/question/9991501
#SPJ13
two carts mounted on an air track are moving toward one another. cart 1 has a speed of 0.9 m/s and a mass of 0.45 kg. cart 2 has a mass of 0.62 kg. (a) if the total momentum of the system is to be zero, what is the initial speed of cart 2 in meters per second?
Because the total momentum of the system is zero, Cart 2's initial speed is 0.62 m/s. No, the system's kinetic energy is not equal to zero because energy, according to the law of conservation of energy, cannot be destroyed.
The kinetic energy of the system is 0.268 Joules. Linear momentum is a vector quantity defined as the product of an object's mass, m, and velocity, v. The letter 'p' is used to express it, and momentum is used for short. Please keep in mind that the body's momentum always points in the same direction as its velocity vector. A body's momentum is defined as the product of its mass and velocity.
Learn more about momentum here-
https://brainly.com/question/24030570
#SPJ4
A scientific model can be used to
Scientific models area unit accustomed make a case for and predict the behaviour of real objects or systems.
A system of ideas, events, or processes is described physically, mathematically, conceptually, or conceptually in an exceedingly scientific model. By victimisation their scientific experience to produce explanations that create it doable to forecast the patterns, scientists work to recognise and comprehend the patterns that exist in the environment.
Scientific model illustrations include:
a simulation of the sun, moon, and earth's motions (which you participated in last year) a way for statement eclipses. The weather will be foretold victimisation models that describe weather events.
Models will assist you in mentally imagining one thing that's difficult to ascertain or comprehend. Models will aid in scientific prediction, understanding of processes, and communication of ideas.
To learn more about scientific models click at https://brainly.com/question/1462653
Hydrochloric acid and sodium hydroxide can be combined to form sodium chloride and water. Which best explains the reaction?
The mass of sodium hydroxide will result in the same mass of sodium chloride.
The total mass of hydrochloric acid and sodium hydroxide will result in a lower total mass of sodium chloride and water.
The mass of hydrochloric acid will result in the same mass of sodium chloride.
The total mass of hydrochloric acid and sodium hydroxide will result in the same total mass of sodium chloride and water.
THE ANSWER IS D
The statement that best describes the reaction is as follows: The total mass of hydrochloric acid and sodium hydroxide will result in the same total mass of sodium chloride and water (option D).
What is the law of conservation of matter?The law of conservation of matter states that matter can neither be created nor destroyed. This law means that the mass that enters and leave a system is accounted for.
The law of conservation of mass explains the input and output of mass in a chemical reaction such that the mass of the reactants must be equal to the mass of the products.
According to this question, hydrochloric acid (HCl) and sodium hydroxide (NaOH) can be combined to form sodium chloride and water.
This means that the total amount of matter of the reactants (hydrochloric acid and sodium hydroxide) must equate the total amount of matter of the products (sodium chloride and water).
Learn more about law of conservation of mass at: https://brainly.com/question/28711001
#SPJ1
an initially stationary box of sand is to be pulled across a floor by means of a cable in which the tension should not exceed 1100 n. the coefficient of static friction between the box and the floor is 0.35. (a) what should be the angle between the cable and the horizontal in order to pull the greatest possible amount of sand, and (b) what is the weight of the sand and box in that situation?
a) The angle between the cable and the horizontal in order to pull the greatest possible amount of sand is 19°. b) The weight of the sand and box in that situation is 3.3x10³ N.
A similar scenario is depicted with a free-body diagram and in the textbook's illustration, where the unknown angle is represented by the symbol. We employ the same system of coordinates as in that figure.
a) Newton's second law thus results in
x : T cosФ - f = ma
y : T sinФ + Fn-mg = 0
With a = 0 and f = f s, max = s F N, we may solve for the mass of the box-and-sand (as a function of angle) as follows:
m = T/g (sinФm + cosФm/us )
Hence, in order to determine the angle m that corresponds to the greatest mass that may be drawn, we will solve using calculus techniques.
dm/dt = T/g (sinФm + cosФm/us ) = 0
As a result, tan m = s is obtained, and for s = 0.35, m = 19 is obtained.
(b) The result of entering our value for m into the formula we discovered for the mass of the box and sand is m=340 kg. This is equivalent to a weight of mg=3.3x10³ N.
To know more about angle click on the link:
https://brainly.com/question/28451077
#SPJ4
what factors affect skill-related fitness and how does each affect it?
Several factors affect your skill-related fitness and your skills, including heredity, practice etc .
Skill-related fitness is have six different components; agility, speed, power, balance, coordination, reaction time.
Several factors affect your skill-related fitness and your skills, including heredity, practice etc
for example some people are able to run faster than others or react quick because they inherited these traits from their parents. A person who did not inherited a tendency in these areas from their ancestors ,may have more difficulty performing skills that require those abilities.
To learn more about skill related fitness :
https://brainly.com/question/1318571
#SPJ1