Answer:
45.9m
Explanation:
Given parameters:
Mass of the ball = 1kg
Initial velocity = 30m/s
Unknown:
Height the ball will travel = ?
Solution:
At the maximum height, the final velocity of the ball will be 0;
Using ;
V² = U² - 2gh
V is the final velocity
U is the initial velocity
g is the acceleration due to gravity
h is the height
0² = 30² - (2 x 9.8 x h)
0 = 900 - 19.6h
h = 45.9m
what do you mean by calcination??
Answer:
Calcination refers to heating a solid to high temperatures in absence of air or oxygen, generally for the purpose of removing impurities or volatile substances.
Explanation:
hope it helps
How many grams are in 2x10^24 formula Units of CaCO3
Answer:
332g
Explanation:
Given parameters:
Formula units = 2 x 10²⁴
Unknown:
Mass of the compound = ?
Solution:
The formula of the compound is:
CaCO₃
6.02 x 10²³ atoms are contained in 1 mole of a compound
2 x 10²⁴ atoms will be made up of [tex]\frac{2 x 10^{24} }{6.02 x 10^{23} }[/tex] = 3.32mole of CaCO₃
Mass of CaCO₃ = number of moles x molar mass
Molar mass of CaCO₃ = 40 + 12 + 3(16) = 100g/mol
Mass of CaCO₃ = 3.32 x 100 = 332g
What is the concentration of H+ ions at a pH = 2?
mol/L
What is the concentration of OH– ions at a pH = 2?
mol/L
What is the ratio of H+ ions to OH– ions at a pH = 2?
: 1
Answer:
0.01M = [H⁺]; 1x10⁻¹²M = [OH⁻]; Ratio is: 1x10¹⁰
Explanation:
pH is defined as -log [H⁺]
For a pH of 2 we can solve [H⁺] as follows:
pH = -log [H⁺]
2 = -log [H⁺]
10^-2 = [H⁺]
0.01M = [H⁺]Using Keq of water:
Keq = 1x10⁻¹⁴ = [H⁺] [OH⁻]
1x10⁻¹⁴ / 0.01M = [OH⁻]
1x10⁻¹²M = [OH⁻]The ratio is:
[H⁺] / [OH⁻] = 0.01 / 1x10⁻¹² =
1x10¹⁰Answer:
1. 0.01 mol/L
2. 0.000000000001 mol/L
3. 10000000000:1
Explanation:
A compound XO exists in nature. A scientist wanted to prepare the same compound in his lab based on the law of constant proportion but the formula of the compound that he prepared was found to be XO2. Which postulates of the law of constant proportion did he violate?
Answer:
The postulate that all pure samples of a particular chemical compound contain the same elements combined in the same proportion by mass.
Explanation:
The law of constant composition (or definite proportion) states that all pure samples of a particular chemical compound contain the same elements combined in the same proportion by mass.
This law implies that irrespective of the source of the sample of the compound or the method by which the sample was prepared, as long as the sample is pure, the elements present in the compound are always combined in a specific ratio by mass. For example, water has the molecular formula H₂O. Irrespective of the water source, for example, tap-water, lake, stream, river or rainfall, each pure sample of water will have the constant composition of 2 atoms of hydrogen to one atom of oxygen.
The given compound exists as XO in nature. Therefore, irrespective of the source or method of preparation, every sample of this compound should have the formula XO. Since the compound prepared by the scientist was XO₂, therefore, the postulate that all pure samples of a particular chemical compound contain the same elements combined in the same proportion by mass was violated by the scientist. The scientist must have prepared a different compound of the elemental compositions.
According to your investigation in part A, how do strong acids differ from weak acids? Select all the correct answers. Strong acids contain more A− than weak acids do. Strong acids contain more H3O+ than weak acids do. Strong acids contain more HA than weak acids do. Strong acids contain more OH− than weak acids do.
Answer:
Strong acids contain more A− than weak acids do.
Strong acids contain more H3O+ than weak acids do
Explanation:
When we talk about a strong acid, we are referring to any acid that is completely dissociated or ionized when it is in an aqueous solution.
It is very eager to lose a proton, H+ in solution according Arrhenius definition.
In aqueous solution, a strong acid ionizes as follows:
HA(aq) + H2O → H3O+(aq) + A−(aq)
Since, strong acids ionize completely in solution, strong acids contain a greater H3O+ and A− concentration than solutions of weak acids.
Answer:
A. Strong acids contain more A− than weak acids do.
B. Strong acids contain more H3O+ than weak acids do.
D. Strong acids contain more OH− than weak acids do.
Explanation:
Plato correct
What increases the salinity of the ocean surface water, causing it to sink
downward?
Help
Answer:
Thermohaline Circulation
Explanation:
The process is known as “Thermohaline Circulation”. In the Earth’s polar regions ocean water gets very cold, forming sea ice. As a consequence the surrounding seawater gets saltier, because when sea ice forms, the salt is left behind. As the seawater gets saltier, its density increases, and it starts to sink.
please help!! I’m really confused because it’s actually supposed to be called occluded front but the definition is true.
List 3 different sugars found in this product. *
3 points
INGREDIENTS / INGRÉDIENTS :
CORN MEAL, SUGAR, CORN BRAN, CORN SYRUP,
MALTODEXTRIN, FANCY MOLASSES, SALT, WHOLE OAT FLOUR.
BAKING SODA, NATURAL FLAVOUR, COLOUR (CAROTENE),
VITAMINS AND MINERALS: IRON, ZINC OXIDE, NIACINAMIDE,
d-CALCIUM PANTOTHENATE, THIAMINE HYDROCHLORIDE,
CHOLECALCIFEROL (VITAMIN D3), PYRIDOXINE
HYDROCHLORIDE, FOLIC ACID.
CONTAINS OAT INGREDIENTS. MAY CONTAIN SOY.
SEMOULE DE MAÏS, SUCRE, SON DE MAÏS, SIROP DE MAÏS,
MALTODEXTRINE, MÉLASSE QUALITÉ FANTAISIE, SEL, FARINE
D'AVOINE ENTIÈRE, BICARBONATE DE SODIUM, ARÔME
NATUREL, COLORANT (CAROTENE),
VITAMINES ET MINÉRAUX : FER, OXYDE DE ZINC,
NIACINAMIDE, d-PANTOTHÉNATE DE CALCIUM,
CHLORHYDRATE DE THIAMINE, CHOLÉCALCIFÉROL (VITAMINE
D3), CHLORHYDRATE DE PYRIDOXINE, ACIDE FOLIQUE,
CONTIENT DES INGRÉDIENTS DE L'AVOINE. PEUT CONTENIR DU SOYA.
Answer:
Sugar (Sucrose), Corn Syrup (Glucose), Molasses (C6H12NNaO3S)
Explanation:
Each of these is a sweetener.
Thomas calculates the volume of an object by multiplying the measurements 1.74 cm x 2.3 cm x 3.09 cm. Using significant figures, how should the answer be reported?
Answer:
12 cm³
Explanation:
Always round to the place of the number with the least amount of significant figures.
1.74 and 3.09 have three significant figures. 2.3 has two significant figures. Therefore, the answer will be rounded to two significant figures.
1.74 cm × 2.3 cm × 3.09 cm = 12.36618 -> 12 cm³
(The 3 in the tenths place is less than 5 so drop it and all the numbers to the right of it.)
Hope that helps.
A car traveled a distance of 30 km in 20 seconds (1/3 hour). What was the speed of the car?
Answer:
90.1km/hr
Explanation:
Given parameters:
Distance = 30km
Time = 20s = 0.33hr
Unknown :
Speed of the car = ?
Solution:
To solve this problem;
Speed = [tex]\frac{distance }{time}[/tex]
Now insert the parameters and solve;
Speed = [tex]\frac{30}{0.333}[/tex] = 90.1km/hr
An atom contains 8 protons, 8 neutrons and 8 electrons. A second atom contains
8 protons, 10 neutrons and 10 electrons. What can be said about these two
atoms?
A. Both atoms are neutral
B. The atoms are isotopes of each other
C. Both atoms are ions
D. These atoms cannot exist in nature
Answer:
B. Isotopes mean having differing number of neutrons but having the same amount of protons basically.
Explanation:
B. The atoms are isotopes of each other
Further explanationGiven
The first atom : 8 protons, 8 neutrons and 8 electrons
The second atom : 8 protons, 10 neutrons and 10 electrons
Required
Comparison
Solution
A. Atom is said to be neutral if the number of protons and electrons is the same
The first atom neutral
The second atom - anion : charge = -2(10 electron-8 proton)
B. isotopes = the same atomic number and different mass number
The first atom : atomic number = 8, mass number = 16
The second atom neutral : atomic number = 8, mass number = 18
Both : isotopes
C. First atom = neutral, second atom anion (charge = -2)
D. Can exist in nature
Which products would form if chlorine gas was bubbled through a solution of sodium bromide?
a. Na and BrCl
b. Na snd BrCl2
c. Na and Br2
d. Na(cl)2 and Br2
Answer:
NaCl and Br2
Explanation:
Edge 2020
Answer:
The Answer is C: Na and Br3
Explanation:
Density is defined by the equation d = m/v. Calculate the density of the wooden block, the rock, and the water by dividing the mass of each object by its volume.
Answer:
Density, d = 8.92 g/mL
Explanation:
Let mass of the wooden block, m = 46.83 g
The volume of the object, V = 5.25 mL
We need to find the density of the wooden block. The density of an object is given by its mass per unit volume.
density = mass/volume
[tex]d=\dfrac{46.83\ g}{5.25\ mL}\\\\=8.92\ g/mL[/tex]
So, the density of the wooden block is 8.92 g/mL.
Answer:
0.495 g/cm3
Explanation:
What is the chemical law?
Answer:
Chemical laws are those laws of nature relevant to chemistry. The most fundamental concept in chemistry is the law of conservation of mass, which states that there is no detectable change in the quantity of matter during an ordinary chemical reaction. Modern physics shows that it is actually energy that is conserved, and that energy and mass are related; a concept which becomes important in nuclear chemistry. Conservation of energy leads to the important concepts of equilibrium, thermodynamics, and kinetics.
Explanation:
Have A Wonderful Day !!
Answer:
Chemical laws are those laws of nature relevant to chemistry. ... The laws of stoichiometry, that is, the gravimetric proportions by which chemical elements participate in chemical reactions, elaborate on the law of conservation of mass.
Explanation:
Which Atom experiences a greater shielding effect, Magnesium (Mg) or chlorine (CI)?
Answer:
To be stable, an atom or ion should have 8 electrons in the outer shell. This is called the octet rule.
Magnesium is unstable because a magnesium atom has 2 valance electrons in its 3rd shell.
Chlorine is unstable, because a chlorine atom has 7 valance electrons is its 3rd shell.
Chlorine has higher electronegativity than magnesium, so the 2 chlorine atoms will attract 2 electrons from a magnesium atom. This produces a +2 magnesium ion and two -1 chloride ions.
A) A Cl atom donates two electrons to a Mg atom
B) An Mg atom donates two electrons to a Cl atom.
C) A Cl atom donates one electron to each of the two Mg atoms.
D) An Mg atom donates one electron to each of the two Cl atoms. YES
Atoms do not donate any electrons. When a chlorine molecule collides with a magnesium atom, each of the chlorine atoms grab an electron from the outer shell of the magnesium atom. You might think that the magnesium atom would be angry at the chlorine molecule. But, the magnesium atom is much “happier” as a stable +2 ion than a neutral atom. And the chlorine molecule is also “happier” as two -1 chloride ions.
Magnesium chloride is the name for the chemical compounds with the formulas MgCl2 and its various hydrates MgCl2(H2O)x. These salts are typical ionic halides, being highly soluble in water. The hydrated magnesium chloride can be extracted from brine or sea water. Magnesium chloride as the natural mineral bischofite is also extracted (solution mining) out of ancient seabeds; for example, the Zechstein seabed in northwest Europe. Anhydrous magnesium chloride is the principal precursor to magnesium metal, which is produced on a large scale. Hydrated magnesium chloride is the form usually used in prescription oral magnesium supplements.
We are the ones who messed with mother nature. Magnesium chloride was very stable (happy) when it was in the sea water. Humans decided to harvest the MgCl2 and rip it apart to produce little strips of magnesium metal for chemistry class.
In nature, “nobody” freely donates anything to “anyone”. The electrostatic forces in the atoms decide who get the electons.
Sometimes, I just get carried away as I answer peoples’ question.
I hope this helped you.
pick repel,or attract. were its circled
Use the periodic table to calculate the percent composition of hydrogen in hexane.
Hexane's chemical formula is CH14.
es )))
A)
16.3%
B)
36.0%
C)
37.5%
D)
83.7%
Answer:
A)16.3% (Hexane's formula is C6H14)
a. 24 m x 3.26 m
b. 120 m x 0.10 m
c. 1.23 m x 2.0 m
d. 53.0 m x 1.53 m
PLEASE SHOW WORK
round answers with correct significant figure.
Answer: a) [tex]78.2m^2[/tex]
b) [tex]1.2\times 10m^2[/tex]
c) [tex]2.5m^2[/tex]
d) [tex]81.1m^2[/tex]
Explanation:
Significant figures : The figures in a number which express the value -the magnitude of a quantity to a specific degree of accuracy is known as significant digits.
Rules for significant figures:
1. Digits from 1 to 9 are always significant and have infinite number of significant figures.
2. All non-zero numbers are always significant.
3. All zero’s between integers are always significant.
4. All zero’s preceding the first integers are never significant.
5. All zero’s after the decimal point are always significant.
The rule apply for the multiplication is :
The least number of significant figures in any number of the problem determines the number of significant figures in the answer.
a) [tex]24m\times 3.26m=78.2m^2[/tex]
b) [tex]120m\times 0.10m=1.2\times 10m^2[/tex]
c) [tex]1.23m\times 2.0m=2.5m^2[/tex]
d) [tex]53.0m\times 1.53m=81.1m^2[/tex]
is reacts with acid a chemical or physical property? (WORTH 30 Points.)
Answer:
Metals in general have they chemical property of reacting with an acid. Zinc reacts with hydrochloric acid to produce hydrogen gas. This is a chemical property. Chemical change results in one or more substances of entirely different composition from the original substances.
Metal reacts with acid is a chemical property.
Metals react with acids which causes the production of salt and hydrogen gas is released. This is a chemical property because the reactions of reactant produces new type of products which is totally change from the parent material or reactants. The chemical property is refers to change of one type of matter into another type so we can conclude that reaction of metals with acid is a chemical property.
Learn more: https://brainly.com/question/20677720
3. If 12.5 grams of copper are reacted with excess chlorine gas, then 25.4 grams of
copper (II) chloride are produced. Calculate the theoretical yield and the percent
yield. Cu + Cl2 → CuCl2
Answer:
Percent yield = 99.6%
Theoretical yield = 25.5 g
Explanation:
Given data:
Mass of copper = 12.5 g
Mass of copper(II) chloride produced = 25.4 g
Theoretical yield = ?
Percent yield = ?
Solution:
Chemical equation:
Cu + Cl₂ → CuCl₂
Number of moles of copper:
Number of moles = mass/molar mass
Number of moles = 12.5 g / 63.5 g/mol
Number of moles = 0.19 mol
Now we will compare the moles of copper and copper chloride.
Cu : CuCl₂
1 : 1
0.19 : 0.19
Mass of CuCl₂: Theoretical yield
Mass = number of moles × molar mass
Mass = 0.19 mol × 134.45 g/mol
Mass = 25.5 g
Percent yield:
Percent yield = (actual yield / theoretical yield )×100
Percent yield = ( 25.4 g/ 25.5 g) ×100
Percent yield = 99.6%
There is a container with an unknown chemical. The container says that there is 1 mole
of the chemical inside, but the name of the chemical is unreadable. The label states
that the mass of the chemical inside is 28g and that the chemical is diatomic. After
pulling out your periodic table, you determine that the unknown chemical is...
The unknown chemical : Nitrogen gas : N₂
Further explanationGiven
1 mole of the unknown chemical
mass = 28 g
Required
The unknown chemical
Solution
A mole is a number of particles(atoms, molecules, ions) in a substance
This refers to the atomic total of the 12 gr C-12 which is equal to 6.02.10²³, so 1 mole = 6.02.10²³ particles
Can be formulated :
mol = mass : molecular weight
Molecular weight(MW) = mass : mol
MW=28 g : 1 mol
MW= 28 g/mol
Because this compound is diatomic, it consists of 2 elements of the same type, so this element has a mass number:
28: 2 = 14
The element having the mass number 14 is N
D. The ¬_____________________ converts food into energy. It is found in both plant cells and animal cells.
Answer:
I believe it’s the mitochondria
Explanation:
Answer:
Mitochondria
Explanation:
Ik bc i have the vocab for that question
what is the molar mass of just the O in CO2?
Answer:
16 g/mol
Explanation:
In CO2, it means we have 1 mole of carbon and 2 moles of oxygen.
However, we want to find the molar mass of just a single mole of oxygen.
Now, from tables of values of elements in electronic configuration, the molar mass of oxygen is usually approximately 16 g/mol.
In essence the molar mass is simply the atomic mass in g/mol
i dont know the answer pls help me
Answer:
Unicellular
Explanation:
Unicellular organisms are made up of only a single cell
Which statement best describes the density of an atom's nucleus?
A The nucleus occupies most of the atom's volume but contains little of its mass,
The nucleus occupies very little of the ston's volume and contains little of its mass.
The nucleus occupies most of the stom's volume and contains most of its mass
The nucleus occupies very little of the ston's volume but contains most of its mass
Answer:
D. The nucleus occupies very little of the volume but contains most of its mass
Explanation:
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, the nucleus occupies very little of the volume but contains most of its mass. The correct option is option D.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density = Mass of an atom's nucleus ÷volume marked on the graduated cylinder
Atoms contains nucleus in its center and electron that revolve around the atom in fixed orbit. The nucleus occupies very little of the volume but contains most of its mass.
Therefore, the nucleus occupies very little of the volume but contains most of its mass. The correct option is option D.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ2
Does it take shorter or longer time to travel when the velocity is low?
Answer:
yes
explanation:
yes because when the velocity is low, all the energy is low and nothing can't do nothing without energy
4 Explain why some acids are safe to consume
while others are not.
Answer:
Household cleaners, antiseptics and battery juice are examples of toxic chemicals that you cannot consume because they have high acids concentrations. However some are very healthy such as critic acids found in oranges. :) Hope this helped.
Describe the difference
between the smooth
Endoplasmic Reticulum
(ER) and rough
Endoplasmic Reticulum
(ER)
Answer:
Smooth endoplasmic reticulum (SER) is a type of endoplasmic reticulum consisting of tubular vesicles that lack ribosomes on the outer surface and is involved in the synthesis and storage of lipids. Rough ER has ribosomes on the outer surface. Smooth ER does have riboszomes on the outer surface.
Explanation:
Which combination of elements produce compounds with a large electronegativity difference and high conductivity?
Answer:
C. H2(g)
Explanation:
7. A 10.0 cm3 sample of copper has a mass of 89.6 g. What is the density of copper?
Answer:
d = 8.96 g/cm³
Explanation:
Given data:
Volume of sample = 10.0 cm³
Mass of copper = 89.6 g
Density of copper = ?
Solution:
Formula:
d = m/v
d = density
m = mass
v = volume
by putting values,
d = 89.6 g/ 10.0 cm³
d = 8.96 g/cm³