a 0.018-ω ammeter is placed in series with a 10.5-ω resistor in a circuit.
Part (a) Calculate the resistance, in ohms, of the combination.
Numeric : A numeric value is expected and not an expression.
Rs = __________
Part (b) If the voltage is kept the same across the combination as it was through the 10.5-Ω resistor alone, what is the percent decrease in current?
Numeric : A numeric value is expected and not an expression.
(I0-I)/I0 (%) = __________________________________________
Part (c) If the current is kept the same through the combination as it was through the 10.5-Ω resistor alone, what is the percent increase in voltage?
Numeric : A numeric value is expected and not an expression.
ΔV/V0 (%) = ____

The weight of the filing cabinet is closest to 638 N.

Since the cabinet is moving at a constant speed, we know that the net force acting on it is zero (otherwise it would be accelerating).

Therefore, the force of friction acting on the cabinet must be equal in magnitude and opposite in direction to the total force applied by Johnny, Susie, and Joe.

The total force applied is:

85 N + 85 N + 50 N = 220 N

Therefore, the force of friction is also 220 N.

The weight of the cabinet can be calculated using the formula:

weight = mass x gravity

where mass is given as 65 kg and gravity is approximately 9.81 m/s^2.

weight = 65 kg x 9.81 m/s^2 = 637.65 N

So the weight of the filing cabinet is closest to 638 N.

Read more on weight here:https://brainly.com/question/25973294

#SPJ1

The new frequency f1 is half of the original frequency f0.

When a sound wave moves into a new medium, its wavelength changes while its frequency remains constant. The new wavelength can be found using the equation:

λ1 = λ0 * (v0 / v1)
where λ0 is the wavelength in the original medium, v0 is the speed of sound in the original medium, and v1 is the speed of sound in the new medium.
Substituting the given values, we get:
λ1 = λ0 * (v0 / 2v0)
λ1 = λ0 / 2
Therefore, the new wavelength λ1 is half of the original wavelength λ0.
The new frequency f1 can be found using the equation:
f1 = f0 * (v0 / v1)
where f0 is the frequency in the original medium.
Substituting the given values, we get:
f1 = f0 * (v0 / 2v0)
f1 = f0 / 2

To learn more about Frequency & Wavelength : https://brainly.com/question/6576757

#SPJ11

The magnitude of the magnetic field at a point 45.5 cm from the conductor is approximately  is 1.88 x 10^-6 T. (tesla).

To calculate the magnitude of the magnetic field at a point 45.5 cm from a long, thin conductor carrying a current of 2.70 A, we can use the formula:

B = μ₀I / 2πr

where B is the magnetic field, μ₀ is the magnetic constant (4π x 10^-7 T m/A), I is the current, and r is the distance from the conductor.

Plugging in the values, we get:

B = (4π x 10^-7 T m/A) x 2.70 A / (2π x 0.455 m)

B = 1.88 x 10^-6 T

Therefore, the magnitude of the magnetic field at a point 45.5 cm from a long, thin conductor carrying a current of 2.70 A is 1.88 x 10^-6 T.

Learn more about conductor here:

https://brainly.com/question/8426444?

#SPJ11

The tension in the elevator cable if the 1,000kg elevator is descending with an acceleration of 1.8 m/s2, downward is 8,000 N. The correct option is b.

To find the tension in the elevator cable, we need to use the formula: Tension (T) = m(g - a), where m is the mass of the elevator (1,000 kg), g is the acceleration due to gravity (9.8 m/s²), and a is the acceleration of the descending elevator (1.8 m/s²).

T = 1,000 kg * (9.8 m/s² - 1.8 m/s²)
T = 1,000 kg * 8 m/s²
T = 8,000 N

Therefore, the tension in the elevator cable is 8,000 N (option b).

For more such questions on Tension.

https://brainly.com/question/18649440#

#SPJ11

The capacitance (A) is 3.54 pF, and the magnitude of the charge (B) on each electrode is 177 pC.

To calculate the capacitance (A), use the formula C = ε₀ * A / d, where ε₀ is the vacuum permittivity (8.85 * 10⁻¹² F/m), A is the area of the electrode, and d is the distance between the electrodes. First, find the area of the electrode by using A = π * r², with r = 1.5 cm. Then, plug the values into the capacitance formula and solve.

To find the magnitude of the charge (B) on each electrode, use Q = C * V, where Q is the charge, C is the capacitance, and V is the voltage. Plug in the calculated capacitance and the given voltage (50 V) and solve for the charge.

To know more about capacitance click on below link:

https://brainly.com/question/28445252#

#SPJ11

The definition of velocity is vector quantity that represents the rate of change of an object's position with respect to time. The definition of acceleration another vector quantity that represents the rate of change of an object's velocity with respect to time

Velocity has both magnitude (speed) and direction, making it different from speed, which is a scalar quantity with only magnitude. In simple terms, velocity indicates how fast an object is moving and in which direction. The formula for velocity is v = Δx/Δt, where v is velocity, Δx is the change in position, and Δt is the change in time.

Acceleration indicates how quickly an object is speeding up or slowing down, as well as changing its direction. The formula for acceleration is a = Δv/Δt, where a is acceleration, Δv is the change in velocity, and Δt is the change in time. Both velocity and acceleration are crucial concepts in physics, particularly in the study of motion. Understanding these terms helps us analyze and predict the behavior of moving objects in various situations, from everyday experiences to complex scientific phenomena.

Learn more about velocity at:

https://brainly.com/question/19979064

#SPJ11

When the car travels north at constant velocity and goes over a piece of mud, the initial acceleration of the mud as it leaves the ground is: D. zero

Since the car is moving at a constant velocity, there is no acceleration acting on the car or the mud in the horizontal direction. The mud is initially at rest on the ground, and when it gets picked up by the tire, its initial acceleration is zero because it hasn't experienced any force yet. Once it starts moving with the tire, it will have a non-zero acceleration due to the forces acting on it, but at the exact moment it leaves the ground, its acceleration is zero.Therefore, the mud that sticks to the tire will also have zero initial acceleration.

learn more about acceleration refer: https://brainly.com/question/30660316

#SPJ11

The smallest observable detail with a microscope using red light of frequency [tex]4.32×1014 Hz[/tex]  is approximately 347 nm. This is due to the diffraction limit of light, which depends on the wavelength and numerical aperture of the lens.

The diffraction limit of a microscope is the smallest resolvable feature based on the wavelength and numerical aperture of the lens. The resolution limit (d) is given by[tex]d ≈ λ/2NA,[/tex]  where λ is the wavelength of light and NA is the numerical aperture of the lens. For red light with a wavelength of 690 nm and a numerical aperture of 1.4, the resolution limit is approximately 347 nm. Therefore, this is the smallest observable detail with a microscope using red light of frequency [tex]4.32×1014 Hz.[/tex]

Learn more about microscope here:

https://brainly.com/question/18661784

#SPJ11

the maximum range of the 0.850 kg ball is reduced by approximately 10.8% due to the 0.900 N wind force.we need to find the percentage by which the maximum range of the 0.850 kg ball is reduced due to the 0.900 N wind force.

Step 1: Calculate the force due to gravity acting on the ball
Force = mass × acceleration due to gravity
F_gravity = 0.850 kg × 9.81 m/s²
F_gravity = 8.3385 N
Step 2: Calculate the net force acting on the ball
Net force = F_gravity - F_wind
Net force = 8.3385 N - 0.900 N
Net force = 7.4385 N
Step 3: Calculate the percentage reduction in force
Percentage reduction = [(F_gravity - Net force) / F_gravity] × 100
Percentage reduction = [(8.3385 N - 7.4385 N) / 8.3385 N] × 100
Percentage reduction ≈ (0.9 N / 8.3385 N) × 100
Percentage reduction ≈ 10.8%
So, the maximum range of the 0.850 kg ball is reduced by approximately 10.8% due to the 0.900 N wind force.

Learn more about force here

https://brainly.com/question/3160109

#SPJ11

The average angular speed of a soccer ball with a circumference of 70.0 cm rolling 14.0 yards in 3.35s is 11.89 rad/s.

To find the average angular speed, follow these steps:

1. Convert the given distance and circumference to the same units. Here, we convert 14.0 yards to cm: 14.0 yards * 91.44 cm/yard = 1280.16 cm.
2. Calculate the number of revolutions the ball makes by dividing the distance it rolls by its circumference: 1280.16 cm / 70.0 cm = 18.29 revolutions.
3. Convert the time from seconds to minutes: 3.35s / 60s/min = 0.05583 min.
4. Calculate the average rotational speed in revolutions per minute (RPM): 18.29 revolutions / 0.05583 min = 327.69 RPM.
5. Convert RPM to radians per second (rad/s): 327.69 RPM * (2π rad/rev) * (1 min/60s) = 11.89 rad/s.

So, the average angular speed of the ball is 11.89 rad/s.

To know more about rotational speed click on below link:

https://brainly.com/question/17025846#

#SPJ11

The impulse delivered by each ball can be calculated by multiplying the force exerted by the time interval over which it is exerted. The force exerted by each ball is the same since they are thrown at equal speeds, but the time interval over which the force is exerted is different due to the different behaviors of the balls. The rubber ball bounces off the wall and exerts a force for a longer time interval, delivering a larger impulse to the wall.

The clay ball, on the other hand, sticks to the wall and exerts a force for a shorter time interval, delivering a smaller impulse to the wall. Therefore, the rubber ball delivers a larger impulse to the wall compared to the clay ball.

Here's a step-by-step explanation:

1. Both balls have equal masses (10 g) and are thrown with equal speeds.
2. Impulse is the product of force and time (Impulse = Force × Time).
3. When the rubber ball bounces, it reverses its direction, leading to a change in momentum.
4. The clay ball sticks to the wall, resulting in no change in its momentum.
5. The rubber ball's change in momentum is greater than the clay ball's, so it imparts a larger impulse on the wall.

In conclusion, the rubber ball delivers a larger impulse to the wall due to its greater change in momentum.

To know more about momentum visit:

https://brainly.com/question/30677308

#SPJ11

The partial pressure of Ar in the mixture is 0.537 atm.

To find the partial pressure of Ar in a mixture of 10.0 g of Ne and 10.0 g Ar with a total pressure of 1.60 atm, you can use Dalton's Law of Partial Pressures.

Here are the steps:

1. Calculate the moles of each gas using their molar masses (Ne: 20.18 g/mol, Ar: 39.95 g/mol):
  Moles of Ne = 10.0 g / 20.18 g/mol = 0.495 moles
  Moles of Ar = 10.0 g / 39.95 g/mol = 0.250 moles

2. Calculate the mole fractions of each gas:
  Mole fraction of Ne = moles of Ne / (moles of Ne + moles of Ar) = 0.495 / (0.495 + 0.250) = 0.664
  Mole fraction of Ar = moles of Ar / (moles of Ne + moles of Ar) = 0.250 / (0.495 + 0.250) = 0.336

3. Use Dalton's Law to find the partial pressure of Ar:
  Partial pressure of Ar = mole fraction of Ar * total pressure = 0.336 * 1.60 atm = 0.537 atm

Learn more about pressure:

https://brainly.com/question/28012687

#SPJ11

The temperature of the glowing filament is approximately 2045.25 °C.

To determine the temperature of the glowing filament, we can use Wien's displacement law, which states that the peak wavelength of the spectrum of a black body radiator is inversely proportional to its temperature. The formula for Wien's displacement law is:

λmax = b/T

where λmax is the peak wavelength of the spectrum, T is the temperature of the radiator in kelvins, and b is a constant equal to 2.898 × 10^-3 m⋅K.

Converting the peak wavelength of 1250 nm to meters, we get:

λmax = 1250 nm × 10^-9 m/nm = 1.25 × 10^-6 m

Substituting this value into the formula and solving for T, we get:

T = b/λmax = (2.898 × 10^-3 m⋅K)/(1.25 × 10^-6 m) = 2318.4 K

Converting the temperature from kelvins to Celsius, we get:

T = 2318.4 K - 273.15 = 2045.25 °C

Therefore, the temperature of the glowing filament is approximately 2045.25 °C.

To know more about temperature: https://brainly.com/question/27944554

#SPJ11

A solenoid that is 85.0cm long has a radius of 1.50 cm and a winding of 1500 turns; it carries a current of 4.60a, then the magnitude of the magnetic field inside the solenoid is approximately [tex]1.65 \times 10^{-2}[/tex] T.

To calculate the magnitude of the magnetic field inside the solenoid, we can use the formula B = μ₀ * n * I, where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.

Here's a step-by-step explanation:

1. First, we need to find the number of turns per unit length (n). We're given that the solenoid has a length of 85.0 cm and a winding of 1500 turns. Convert the length to meters: 85.0 cm = 0.85 m.

n =( number of turns) /( length) = 1500 turns /[tex]\frac{1500 turns}{ 0.85 m}[/tex] = 1764.71 turns/m.

2. Next, we're given that the solenoid carries a current (I) of 4.60 A.

3. Now, we need to find the permeability of free space (μ₀). This is a constant value: μ₀ = [tex]4\pi \times 10^{-7}[/tex]T·m/A.

4. Finally, we can calculate the magnetic field (B) using the formula: B = μ₀ * n * I.
[tex]B = (4\pi  \times 10^{-7} T \frac{m}{A} ) * (1764.71 turns/m) * (4.60 A).[/tex]

5. Solving the equation, we get:
[tex]B \approx 1.65 \times 10^{-2} T.[/tex]

So, the magnitude of the magnetic field inside the solenoid is approximately  [tex]1.65 \times 10^{-2}[/tex] T.

To know more about solenoid refer here:

https://brainly.com/question/15576393#

#SPJ11

The angle of the first dark fringe is 0.398°, when the diameter hole is illuminated.

To find the angle of the first dark fringe when a 0.72 mm diameter hole is illuminated by infrared light with a wavelength of 2.5 micrometers, you can use the formula for the angular width of the central maximum in a single-slit diffraction pattern:
θ = (2 * λ) / d
where θ is the angle of the first dark fringe, λ is the wavelength of the light, and d is the diameter of the hole.
First, convert the diameter to micrometers: 0.72 mm = 720 micrometers.
Now, plug in the values:
θ = (2 * 2.5) / 720
θ = 5 / 720
To find the angle in radians, calculate:
θ = 0.00694 radians
To convert radians to degrees, multiply by (180 / π):
θ = 0.00694 * (180 / π)
θ ≈ 0.398°
The angle of the first dark fringe is approximately 0.398°.

To know more about fringe please refer: https://brainly.com/question/31315270

#SPJ11

The magnitude of the horizontal force acting on the sprinter is 76 N, and the sprinter's power output at 2.0 s, 4.0 s, and 6.0 s is 684 W, 342 W, and 228 W, respectively.

The first step is to find the sprinter's acceleration using the equation:

distance = (initial velocity x time) + (1/2 x acceleration x [tex]time^2[/tex])

Rearranging this equation gives us:

acceleration = 2 x (distance - initial velocity x time) / [tex]time^2[/tex])

Plugging in the given values, we get:

acceleration = 2 x (51 m - 0 m/s x 7.0 s) / [tex](7.0 s)^2[/tex] = [tex]1.22 m/s^2[/tex]

Next, we can use Newton's second law of motion, F = ma, to find the magnitude of the horizontal force acting on the sprinter:

force = mass x acceleration = 62 kg x [tex]1.22 m/s^2[/tex] = 76 N

To find the sprinter's power output at 2.0 s, 4.0 s, and 6.0 s, we can use the equation for power:

power = work/time

The work done by the sprinter is equal to the force exerted multiplied by the distance traveled, since the force and displacement are in the same direction. Therefore, we can use the equation:

work = force x distance

Plugging in the values, we get:

work = 76 N x (2 m + 4 m + 6 m) = 1368 J

Using the given times, we can calculate the power output at each time:

power at 2.0 s = work done in 2.0 s / 2.0 s = 684 J/s = 684 W

power at 4.0 s = work done in 4.0 s / 4.0 s = 342 J/s = 342 W

power at 6.0 s = work done in 6.0 s / 6.0 s = 228 J/s = 228 W

To know more about power output, refer to the link below:

https://brainly.com/question/31479681#

#SPJ11

Part a: The power produced during each pulse can be calculated by dividing the energy (2.50 mJ) by the duration of the pulse (10.0 ns). This yields a power of 250 kW.

Part b: The average intensity of the beam during each pulse can be calculated by dividing the power (250 kW) by the area of the beam (0.850 mm). This yields an intensity of 294.12 MW/m^2.

Part c: The average power generated by the laser can be calculated by multiplying the number of pulses (55) per second by the power of each pulse (250 kW). This yields an average power of 13.75 MW.

Therefore, the argon-fluoride excimer laser produces a pulse of energy 2.50 mJ, lasting 10.0 ns, with a power of 250 kW. The beam has an average intensity of 294.12 MW/m^2 and an average power of 13.75 MW when it emits 55 pulses per second. This laser is commonly used in PRK and LASIK ophthalmic surgery due to its ability to produce a very short pulse of high intensity and power.

Know more about average intensity here

https://brainly.com/question/31138565#

#SPJ11

The current in the coil must be 0.00994 A for the magnetic field at the center of the coil to be 0.0550 T.

We can use the formula for the magnetic field at the center of a closely wound, circular coil:

B = (μ₀×N × I) / (2 × R)

Where B is the magnetic field, μ₀ is the permeability of free space (4π × 10⁻⁷ Tm/A), N is the number of turns, I is the current, and R is the radius.

You're given the following information:
- B = 0.0550 T
- N = 760 turns
- R = 2.40 cm (which should be converted to meters: 0.024 m)

Now you can rearrange the formula to solve for the current, I:

I = (2 × R × B) / (μ₀ × N)

Plug in the given values:

I = (2 × 0.024 m × 0.0550 T) / (4π × 10⁻⁷ Tm/A × 760)

Calculate the current, I:

I ≈ 0.00994 A

So, the current in the coil must be approximately 0.00994 A if the magnetic field at the center of the coil is 0.0550 T.

To know more about magnetic field refer here :

https://brainly.com/question/14411049

#SPJ11

This means that the cell is not producing as much electrical potential as a standard cell would at equilibrium, because the concentrations of the ions are not at their standard state values. The potential of the nonstandard cell is approximately 0.45 V.

a) The standard cell potential E°cell can be calculated by subtracting the reduction potential of the anode from the reduction potential of the cathode. So, E°cell = E°cathode - E°anode = +0.80 V - (-0.76 V) = +1.56 V.

b) The potential of the nonstandard cell can be calculated using the Nernst equation:

Ecell = E°cell - (RT/nF) ln(Q)

For this specific case, the balanced equation is:

Zn(s) + 2Ag+(aq) → Zn2+(aq) + 2Ag(s).

Therefore, n = 2. At room temperature (25°C),

[tex]R = 8.314 J/(mol*K), and F = 96,485 C/mol.[/tex]

Plugging in the given concentrations of Ag+ and Zn2+ into the equation for Q, we get:

[tex]Q = [Zn2+]/[Ag+]^2 = 1.5/(0.0025)^2 = 240,000.[/tex]

Ecell = 1.56 - (8.314298/(296,485)) ln(240,000) ≈ 0.45 V.

A condition of equilibrium is one of stability or balance where conflicting forces or effects are balanced.  In the context of physics, it refers to the condition where the net force acting on an object is zero, and thus the object is not accelerating. In chemistry, it refers to the point where the rate of a forward reaction is equal to the rate of the reverse reaction, resulting in no overall change in the concentration of reactants and products.

Equilibrium can also be applied to economics, where it refers to a state of balance between the supply and demand of a particular good or service, resulting in an optimal market price. In this context, any changes to the supply or demand will cause a shift in the equilibrium point, resulting in a new optimal price.

To learn more about Equilibrium visit here:

brainly.com/question/30807709

#SPJ4

Complete Question:

An electrochemical cell consists of two half cells ZnZn(s) and Ag Ag(s) Zn2+ (aq) + 2e Zn(s) = -0.76 V Ag (aq) + Ag(s) E = +0.80 V

a) Calculate the Elin V) for the voltaic cell with these two half cells

b) If the concentration of Agis 0.0025 M and concentration of Zn2+ is 1.500 M. what is the potential in V) of this nonstandard cell?

Okay, let's break this down step-by-step:

* There is a force of 100N acting on the body.

* The mass of the body is 20kg.

* The body accelerates from rest to a velocity of 20ms^-1.

To calculate the distance over which this force acts:

1) Calculate the acceleration: Force / Mass = 100N / 20kg = 5ms^-2

2) Calculate the displacement (distance traveled) using: displacement = 1/2 * acceleration * time^2

Since the acceleration is constant, we can set the initial velocity to 0 and final velocity to 20ms^-1.

Then: time = (20ms^-1) / 5ms^-2 = 4s

3) Displacement = 1/2 * 5ms^-2 * 4s^2 = 20m

Therefore, the force of 100N acts on the body over a distance of 20m to accelerate it from rest to 20ms^-1.

Let me know if you have any other questions!

1. For an object (A) moving uniformly in the negative direction of the x-axis with a speed of 15 m/s and initial abscissa of 30 m, the time equation of its motion is X = 30 - 15*t, and its (V-1) graph is a straight line with a slope of -15 and a y-intercept of 30, and 2. When another particle (B) with a time equation of XB = 101-70 (S.1) moves on the same axis, (A) and (B) meet at time t = 2.13 s and position X = -32.7 m. The distance separating (A) and (B) at t = 8 s is 369 m.

1.a. The time equation of the motion of (A) is given by:

X = XoA + Vt

where X is the position of (A) at time t, XoA is the initial position of (A), V is the velocity of (A) and t is the time elapsed since the start of the motion.

Plugging in the given values, we get:

X = 30 - 15t

b. The (V-1) graph of (A) is a straight line with a slope of -15 (since the velocity is constant and negative) and a y-intercept of 30 (since the initial position is 30). The graph looks like this:( below)

2a. To determine the instant at which (A) and (B) meet, we need to find the time t at which their positions are equal. Equating the time equations of (A) and (B), we get:

30 - 15t = 101 - 70t

Solving for t, we get:

t = 2.13 s

To find the position at which they meet, we can plug this value of t into either of the time equations and get:

X = 101 - 70*2.13 = -32.7 m

So (A) and (B) meet at time t = 2.13 s and position X = -32.7 m.

b. To determine the distance separating (A) and (B) at t = 8 s, we need to find their positions at that time. Using the time equation of (A), we get:

Xa = 30 - 158 = -90 m

Using the time equation of (B), we get:

Xb = 101 - 708 = -459 m

The distance separating (A) and (B) at t = 8 s is:

|Xb - Xa| = |-459 - (-90)| = 369 m.

Hence, Two particles moving on the same axis, where one is uniformly moving with an initial abscissa of 30 m and a speed of 15 m/s, and the other is moving with a time equation of XB = 101-70 (S.1), meet at time t = 2.13 s and position X = -32.7 m, while the distance separating them at t = 8 s is 369 m.

To learn more about Velocity _time graph click:

https://brainly.com/question/11290682

#SPJ1

When a heavy bag falls off a moving cart on a horizontal track, the speed of the cart will be affected due to the conservation of linear momentum.

As the bag falls straight down, an equal and opposite impulse acts on the cart, causing it to increase in speed. In an impulse-momentum bar chart, the initial momentum (mass x initial velocity) of the cart-bag system is represented by a bar. After the bag falls, the final momentum is split into two separate bars: one for the cart and one for the bag. The cart's momentum bar will be larger than its initial momentum, indicating an increase in its speed, while the bag's momentum bar will represent its downward momentum. The sum of the final momentum bars will be equal to the initial momentum bar, conserving the total linear momentum of the system.

Learn more about momentum :

https://brainly.com/question/30677308

#SPJ11

When a heavy bag falls off a moving cart on a horizontal track, the speed of the cart will be affected due to the conservation of linear momentum.

As the bag falls straight down, an equal and opposite impulse acts on the cart, causing it to increase in speed. In an impulse-momentum bar chart, the initial momentum (mass x initial velocity) of the cart-bag system is represented by a bar. After the bag falls, the final momentum is split into two separate bars: one for the cart and one for the bag. The cart's momentum bar will be larger than its initial momentum, indicating an increase in its speed, while the bag's momentum bar will represent its downward momentum. The sum of the final momentum bars will be equal to the initial momentum bar, conserving the total linear momentum of the system.

Learn more about momentum :

https://brainly.com/question/30677308

#SPJ11

The true velocity at 20,000 ft is approximately 568.4 knots and the Mach number is approximately 1.93.

The true velocity (Vt) and Mach number (M) can be calculated using the following equations:

Vt = Ve / √(ρ/ρ₀)

M = Vt / a

where:

Ve = indicated airspeed

ρ = density of air at altitude

ρ₀ = density of air at sea level (1.225 kg/m³)

a = speed of sound at altitude

Assuming standard atmospheric conditions, the density of air at 20,000 ft is approximately 0.286 kg/m³ and the speed of sound is approximately 295 m/s. Substituting these values into the equations, we get:

Vt = (430 kn) / √(0.286/1.225) = 568.4 kn

M = (568.4 kn) / (295 m/s) = 1.93

To know more about Mach number  click on below link:

https://brainly.com/question/29538118#

#SPJ11

The solidification of olive oil is a slow and gradual process that takes the consistency from a liquid to a soft state to a solid state. The cooling process begins at 40-50°F. This means that the temperature of this oil will start to solidify.

To find the heat change when a 225g sample of olive oil (c = 1.79 J/g°C) is cooled from 95.8°C to 52.1°C, this formula can be used:
q = mcΔT
where:
q = heat change
m = mass of the sample (225 g)
c = specific heat capacity of olive oil (1.79 J/g°C)
ΔT = change in temperature (final temperature - initial temperature)

Step 1: Calculate ΔT
ΔT = 52.1°C - 95.8°C = -43.7°C

Step 2: Plug the values into the formula
q = (225 g)(1.79 J/g°C)(-43.7°C)

Step 3: Calculate q
q = -17637.975 J

Since the answer should be expressed in scientific notation, you can round it to two significant figures:
q ≈ -1.76 x 10^4 J
The heat change when the 225 g sample of olive oil is cooled from 95.8°C to 52.1°C is approximately -1.76 x 10^4 J.

So, the correct answer is (a.)

Know more about heat change and olive oil:

https://brainly.com/question/15675521

#SPJ11

The ferry boat is sailing in a direction of 0 degrees (due North) at a speed of 10.39 km/h. To determine the direction of the ferry boat as observed from the shore, we must consider both the ferry boat's velocity and the river's velocity. The ferry boat is sailing at 12 km/h 30 degrees W of N, and the river is flowing at 6.0 km/h E.

Step 1: Break the ferry boat's velocity into its components:
- Northward component: 12 km/h * cos(30°) = 10.39 km/h
- Westward component: 12 km/h * sin(30°) = 6 km/h

Step 2: Add the river's velocity to the ferry boat's components:
- Northward component: 10.39 km/h (unchanged)
- Eastward component: 6.0 km/h (from the river) - 6 km/h (from ferry boat) = 0 km/h

Step 3: Determine the resultant velocity's magnitude and direction:
- Magnitude: √(10.39^2 + 0^2) = 10.39 km/h
- Direction: tan^-1(0/10.39) = 0° (N).

To know more about ferry boat refer here:

https://brainly.com/question/30583317#

#SPJ11

7.9 m/s2 is the instant acceleration of the car at time t = 2 s.

What is speed?

The definition of speed. a direction or speed at which an object's location changes. The distance traveled relative to the time it took to travel that distance is how fast something is moving. As it just has a direction and no magnitude, speed is a scalar quantity.

What is acceleration?

Acceleration was the representation rate In a change of velocity because the acceleration always depends on the object's speed. Acceleration determines the rate of the particles. Acceleration is the vector quantity. It is a vector quantity, but it has both extent and movement. Newton's law also has the acceleration of the magnitude described. The m.s-2 is the standard unit for acceleration.

Therefore, 7.9 m/s2 is the instant acceleration of the car at time t = 2 s.

Learn more about speed from the given link.

https://brainly.com/question/3004254

#SPJ1

The instant acceleration of the car at time t = 2 s is approximately 12.65 [tex]m/s^2[/tex], which is closest to option C) 12.6 [tex]m/s^2[/tex].

What is speed?

The definition of speed. a direction or speed at which an object's location changes. The distance traveled relative to the time it took to travel that distance is how fast something is moving. As it just has a direction and no magnitude, speed is a scalar quantity.

To find the instant acceleration of the car at time t = 2 s, we need to take the second derivative of both x(t) and y(t) with respect to time (t) and then evaluate it at t = 2 s.

The velocity of the car can be found by taking the first derivative of x(t) and y(t) with respect to time (t):

[tex]v_x(t) = 3 + 4t\\\\v_y(t) = 2 + 3t^2[/tex]

The acceleration of the car can be found by taking the second derivative of x(t) and y(t) with respect to time (t):

[tex]a_x(t) = 4\\\\a_y(t) = 6t[/tex]

Now, we need to evaluate the acceleration of the car at t = 2 s:

[tex]a_x(2) = 4 m/s^2\\\\a_y(2) = 12 m/s^2[/tex]

The total or instant acceleration of the car at time t = 2 s can be found using the Pythagorean theorem:

[tex]a = \sqrt(a_x^2 + a_y^2) = \sqrt(4^2 + 12^2) = \sqrt(160) = 12.65 m/s^2[/tex](approximately)

Therefore, the instant acceleration of the car at time t = 2 s is approximately 12.65 [tex]m/s^2[/tex], which is closest to option C) 12.6 [tex]m/s^2[/tex].

Learn more about speed from the given link.

brainly.com/question/3004254

#SPJ1

The equilateral triangle will come to rest in a stable equilibrium position when released from the initial position. The square has the smallest moment of inertia about the pivot point.

This is because the center of mass of the equilateral triangle is directly above the pivot point, while for the square and hexagon, the center of mass is off to one side. To determine which shape has the smallest moment of inertia about the pivot point, we can use the formula for the moment of inertia of a polygon about its centroid:

I = (n/12) * s² * h² * (1 + cos(2*pi/n))

where n is the number of sides, s is the length of each side, and h is the distance from the centroid to a side. For a regular polygon, the centroid is also the center of mass, so we can use the side length as the distance from the pivot point.

Plugging in the values for each shape,

Square: I = (4/12) * 1² * (1/2)² * (1 + cos(pi/2)) = 1/12

Hexagon: I = (6/12) * 2² * (√(3)/2)² * (1 + cos(pi/3)) = 2√(3)/3

Equilateral triangle: I = (3/12) * 3² * (√(3)/3)² * (1 + cos(2*pi/3)) = 9sqrt(3)/4

To know more about square, here

brainly.com/question/28776767

#SPJ4

--The complete question is, A square, a regular hexagon, and an equilateral triangle are pivoted about one of their vertices such that they can freely rotate in the plane. The sides of the shapes have lengths 1, 2, and 3 units, respectively. Which shape will come to rest in a stable equilibrium position when released from the initial position? Which shape has the smallest moment of inertia about the pivot point?--

The actual μ₀ value should be higher than the measured μ₀ value and doubling the length of the rod will not affect the μ₀ value.

Detailed explanation of the answer is given below:

1. If we consider the effect of repulsive forces causing the conduction electrons in each rod to move as far away from the other rod as possible, the actual μ₀ value should be higher than the measured μ₀ value.

The reason for this is that the effective distance between the centers of the rods would be slightly larger due to the repulsion, causing the denominator in the equation to increase, and thus requiring a higher μ₀ value to maintain the equality.

2. If the length of Rod AB is doubled while the length of Rod CD remains the same, the result will not change.

In the given equation, 7*10^-7 = μ0*L/2*pi*d*g, the length of the rods does not directly affect μ₀. The equation only depends on the distance (d) between the rods and the gravitational constant (g), so doubling the length of Rod AB will not affect the μ0 value.

Learn more about gravitational constant:

https://brainly.com/question/27943482

#SPJ11

The total energy needed is 2,418 Joules.

To calculate the total energy needed, we need to consider two steps: heating the water to 100°C and vaporizing it to steam.

Step 1: Heating the water

We use the equation Q = mcΔT, where Q is the energy needed, m is the mass, c is the specific heat of water (4.18 J/g°C), and ΔT is the temperature change.

Q1 = (10 g)(4.18 J/g°C)(100°C - 20°C) = 3,340 J

Step 2: Vaporizing the water
We use the equation Q = mL, where L is the heat of vaporization (2,260 J/g).
Q2 = (10 g)(2,260 J/g) = 22,600 J

Total energy needed: Q = Q1 + Q2 = 3,340 J + 22,600 J = 25,940 J.

To know more about heat of vaporization click on below link:

https://brainly.com/question/11084176#

#SPJ11