Answer:
internal energyExplanation:
At constant pressure, the heat of reaction is equal to the enthalpy change of the system. Most chemical reactions occur at constant pressure, so enthalpy is more often used to measure heats of reaction than internal energy
For a chemical reaction, the heat of reaction, also known as enthalpy change (∆H), is equal to the difference between the total energy of the products and the total energy of the reactants.
Enthalpy change represents the amount of heat energy exchanged or released during the course of a reaction. The heat of reaction can be positive (endothermic), indicating that the reaction absorbs heat from the surroundings, or negative (exothermic), indicating that the reaction releases heat to the surroundings.
The magnitude of the heat of reaction is a measure of the amount of heat energy involved in the reaction.
Learn more about Heat of reaction, here:
https://brainly.com/question/30464598
#SPJ2
What is a covalent compound?
A.a compound with a metal and a nonmetal ion sharing valence electrons
B.stable group of multiple metal nuclei sharing valence electrons
C.a compound with nonmetal ions transferring valence electrons
D.a stable group of more than one type of atom bonded by bonding electron pairs
A covalent compound is a compound with a metal and a nonmetal ion sharing valence electrons (option A).
What is a covalent compound?A covalent compound is a molecule formed by covalent bonds, in which the atoms share one or more pairs of valence electrons.
Covalent bond is a type of chemical bond where two atoms are connected to each other by the sharing of two or more electrons.
Chemical compounds are generally grouped into one of two categories as follows;
covalent compounds ionic compoundsCovalent or molecular compounds generally result from two nonmetals reacting with each other. The elements form a compound by sharing electrons, resulting in an electrically neutral molecule.
Examples of covalent compounds are as follows:
watersucroseDNALearn more about covalent compounds at: https://brainly.com/question/11632372
#SPJ1
help with this........
Which two properties define the critical point of matter in a phase diagram? A. mass and volume B. pressure and volume C. pressure and temperature D. density and temperature E. density and pressure
Answer:
C. pressure and temperature
Explanation:
For each substance, the conditions defining the critical point are the critical temperature, the critical pressure, and the critical density.
Hope this helped!!!
Pressure and temperature are the properties defining the critical point of matter in a phase diagram. The correct option is C.
What is a phase diagram?A phase diagram is a visualization of a material's physical states under various situations of pressure and temperature.
Pressure is on the y-axis of a typical phase diagram, and temperature is on the x-axis. A phase transition when we cross the lines or curves on the phase diagram.
The pressure and temperature point on a phase diagram where a material's liquid and gaseous phases merge into a single phase.
The merged single phase is known as a supercritical fluid above the critical point temperature.
Phase diagrams are graphical representations of the connections between the various phases that appear in a system under equilibrium conditions.
Thus, the correct option is C.
For more details regarding phase diagram, visit:
https://brainly.com/question/16945664
#SPJ2
How many grams of water, H 2 O , is given o when 62.1 g of propane, C 3 H 8 , burns?
Answer:
101.62 grams of water is given o when 62.1 g of propane burns.
Explanation:
Propane gas (C₃H₈) burns with oxygen gas and products carbon dioxide gas and liquid water. The balanced reaction is:
C₃H₈ + 5 O₂ → 3 CO₂ + 4 H₂O
By stoichiometry, the following amounts of moles of each compound participate in the reaction:
C₃H₈: 1 mole O₂: 5 moles CO₂: 3 moles H₂O: 4 molesBeing the molar mass of each compound:
C₃H₈: 44 g/mole O₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleBy stoichiometry, the following mass quantities of each compound participate in the reaction:
C₃H₈: 1 mole* 44 g/mole= 44 grams O₂: 5 moles* 32 g/mole= 160 gramsCO₂: 3 moles* 44 g/mole= 132 gramsH₂O: 4 moles* 18 g/mole= 72 gramsThen you can apply the following rule of three: if by stoichiometry 44 grams of propane produces 72 grams of water, 62.1 grams of propane how much mass of water does it produce?
[tex]mass of water=\frac{62.1 grams of propane*72 grams of water}{44 grams of propane}[/tex]
mass of water= 101.62 grams
101.62 grams of water is given o when 62.1 g of propane burns.
How many moles of oxygen are required to react completely with 5.00 grams of hydrogen?
Answer:
3
Explanation:
Silver nitrate, AgNO3 reacts with sodium
chloride, NaCl to form a precipitate of silver
chloride. Write the balanced ionic equation for
this reaction.

Answer: Ag^+ (aq) + NO3^-(aq) + Na^+ (aq) +Cl^- (aq) ⇒ AgCl(s) + NaNO3(aq)
A scientist prepares 500.0 L of gas at 0.921 atm pressure
and 200.0°C. The scientist transfers the gas into a tank
where it cools to 20.0°C and has a pressure of 30,0 atm.
What is the volume of the gas under these conditions?
I
Answer:
200.0°C.
Explanation:
The resulatant volume of gas under given conditions is 9.49 liters.
What is ideal gas equation?Ideal gas equation gives idea about the behavior of gases at different conditions and it will be represented as:
PV = nRT, where
P = pressure in atm
V = volume in L
n = moles of gas
R = universal gas constant = 0.082 L.atm/K.mol
T = temperature in K
First we calculate the moles of gas by putting the values according to the first condition in the above equation and we have
n = (0.921)(500) / (0.082)(473) = 11.86 moles
Now we calculate the volume of gas by using the above equation and details of the second condition as:
V = (11.86)(0.082)(293) / (30) = 9.49 L
Hence resultant volume of the gas is 9.49L.
To know more about ideal gas equation, visit the below link:
https://brainly.com/question/555495
#SPJ2
does adding acid make a solution more acidic or basic
Answer:
Adding an acid increases the concentration of H3O+ ions in the solution. Adding a base decreases the concentration of H3O+ ions in the solution. An acid and a base are like chemical opposites. If a base is added to an acidic solution, the solution becomes less acidic and moves toward the middle of the pH scale.
WILL MARK BRAINLIEST
Answer:
B) inertia
Explanation:
Sorry if wrong
What happens when Sulphuric acid is added into Barium Chloride solution?
Answer:
white precipitate of barium chloride is formed
acrostic words or phrases that describe street dance
why do some material steel hotter than others even if the two materials are the same temperature
According to the dichotomous key, organism 2 is a
A)
dragonfly nymph
B)
water scorpion
C)
bristle worm.
D)
water mite.
In the combustion of octane, 2 C8H18 +25 O2 --> 16 CO2 + 18 H2O, if 376.0 liters of carbon dioxide formed at STP, then the volume of oxygen used was A. 587.5 L B. 240.6 L C. 839.3 L D. 299.1 L
Answer:
587.5 L (Option A)
Explanation:
The reaction is:
2 C₈H₁₈ + 25O₂ → 16CO₂ + 18H₂O
We know that in STP conditions 1 mol of any gas is contained in 22.4L
Then, we can make a rule of three, to determine the moles of produced carbon dioxide.
22.4L is the volume for 1 mol
376 L will be the volume for (376 . 1) 22.4 = 16.78 moles at STP conditions.
Stoichiometry is 16:25.
16 moles of CO₂ are produce by the reaction of 25 moles of O₂
Then, 16.78 moles of CO₂ were produced by (16.78 . 25) /16 = 26.2 moles.
Now, the rule of three again.
1 mol of oxygen gas is contained at 22.4L, at STP conditions
26.2 moles might be contained at (26.2 . 22.4)/1 = 587.5 L
calculate the molarity of 0.57 moles NaHCO3 in 61.2 mL of solution. Report your answer 4 places after the decimal don’t forget to round.
Answer:
The correct response is "9.313 M".
Explanation:
According to the question, the values are:
Moles of solute,
= 0.57 moles
Liters of solution,
= 61.2 mL
or,
= 0.0612 L
Now,
The molarity will be:
= [tex]\frac{Moles \ of \ solute}{Liters \ of \ solution}[/tex]
On putting the given the values in the above formula, we get
= [tex]\frac{0.57}{0.0612}[/tex]
= [tex]9.313 \ M[/tex]
On the cooling curve below, between points Dand Ethe substance is changing from
A. gas to solid
B. gas to liquid
C. liquid to solid
D. solid to liquid
Please help!! only right answers!! will mark brainlest.
Answer:
7.35 *2
Explanation:
Because I mole of Na2o is made of 2 moles of NaOH
Which of the following is the term for the heaviness on something's surface that exerts a force over an area? a. force b. pressure c. sediment d. depositionn
The term for the heaviness on something's surface that exerts a force over an area is pressure. The correct option is b. pressure
Definition of PressureFrom the question, we are to determine the term for the heaviness on something's surface that exerts a force over an area.
Here, we are talking about pressure.
Pressure is defined as the physical force exerted on an object. Mathematically, it is defined as the perpendicular force per unit area.
That is,
[tex]P = \frac{Force}{Area}[/tex]
Where P is the pressure
The units of pressure are Newtons per square meter (N/m²), Pascals etc.
Hence, the term for the heaviness on something's surface that exerts a force over an area is pressure. The correct option is b. pressure
Learn more on Pressure here: https://brainly.com/question/16789304
¿Las cargas eléctricas forman parte de los átomos?
Answer:
si. en los atomos los protones y los electrones llevan cargas electricas
PLEASE HELP
Four students are asked to describe a nebula and a star. Their responses
are shown in the table below. Which student described these two
celestial bodies correctly? *
Student
1
2.
Student Responses
Description of a Nebula
Description of a Star
A collection of hot gases that A sphere of dust and gases that contains
sometimes produces light from many elements and produces light from
nuclear reactions
fusion and fission reactions
A collection of hot gases that
results from stars that have
A collection of gases from several nebulae
exploded
hot enough to cause a nuclear reaction
A collection of dust and gases A sphele of matter with a density and a
that forms stars or results from temperature great enough to cause a
dying stars
nuclear reaction at its center
A collection of dust and gases A collection of hot gases that forms a
that is found near stars
sphere but produces no light
3
4
Student 1
Student 2
Student 3
Student A
Answer:student 3
Explanation:
Number 7 plssssssssssss
Answer:
C
Explanation:
Plants seek rewards for nutrients, sunlight, water, and territory necessary for survival
Answer:
i think the answer is letter B.
Xavier was conducting a long term study of two populations of butterflies. Both populations had the same number of individuals. Both populations lived in forests that were the same size. Population A lived in a forest that was full of milkweed, the favorite food of this butterfly species. Population B lived in a forest that had limited amounts of milkweed and other foods. Over many years, Xavier found that one of the populations was showing signs of evolutionary change. Their mouth parts were changing and they could get food from new kinds of plants. Which statement explains why one population would be more likely to evolve in response to natural selection? *
a. Population B would be more likely to change because it has a ready supply of food, and only certain butterflies would be able to survive
b. Population A would be more likely to change because it has a ready supply of food and only certain butterflies would be able to survive
c. Population A would be more likely to change because it has a limited amount of food and some butterflies might be better able to get enough food, survive, and reproduce
d. Population B would be more likely to change because those butterflies have a limited supply of food, and butterflies with certain traits might be better able to get enough food, survive, and reproduce.
why is the volume of hydrogen is doubled the volume of oxygen in electrolysis of water?
Explanation:
As you can that water splits into molecules of hydrogen and 1 molecules of oxygen since , number of molecules of hydrogen released is double the number of molecules of oxygen released, volume occupied by hydrogen gas is double the volume occupied by oxygen gas
What does pH measure?
A. the density of a solution
B. the salt concentration of a solution
C. the sulfate ion concentration of a solution
D. the hydronium ion concentration of a solution
Answer:
Option D
Explanation:
Hydronium ion concentration is a measure of pH of a solution.
The mathematical equation for the same is [H3O+] = 10-pH
OR
[H3O+] = antilog (- pH)
Hence, option D is correct
What volume would a sample of gas occupy in LITERS at 0.985 atmospheres and a volume of 3.65 liters if the pressure were raised to 861.0 mmHg?
Answer:
3.18 L
Explanation:
Step 1: Given data
Initial pressure (P₁): 0.985 atmInitial volume (V₁): 3.65 LFinal pressure (P₂): 861.0 mmHgFinal volume (V₂): ?Step 2: Convert P₁ to mmHg
We will use the conversion factor 1 atm = 760 mmHg.
0.985 atm × 760 mmHg/1 atm = 749 mmHg
Step 3: Calculate the final volume of the gas
Assuming ideal behavior and constant temperature, we can calculate the final volume using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁/P₂
V₂ = 749 mmHg × 3.65 L/861.0 mmHg = 3.18 L
4.1 moles of sodium carbonate to molecules of sodium carbonate.
Answer:
2.469×10²⁴ molecules
Explanation:
Multiply by Avogadro's Number (6.022×10²³
1. Describe how an acidic solution forms when HCl is mixed in water and how a basic solution forms when NaOH is mixed in water.
Answer:
Dissociation
Explanation:
When HCl and NaOH are mixed with water, the HCl and NaOH molecules interacts with the water, forming what is known as ions. Ions are atoms with electric charge.
When HCl, it forms H+ and Cl-. The mixture is acid because what define a mixture as acid is the amount of H+ ions.
When NaOH mixes with water, it forms Na+ and OH- ions. The amount of OH- ions in a mixture defines it as basic.
What is the specific heat of silicon if the temperature of a 4.11 g sample of silicon
is increased by 3.8 °C when 11.1 J of heat is added?
Answer:
The right solution is "0.7107 J/g°C".
Explanation:
The given values are:
Mass,
m = 4.11 g
Temperature,
ΔT = 3.8°C
Heat,
Q = 11.1 J
The specific heat of silicon will be:
⇒ [tex]C=\frac{Q}{m \Delta T}[/tex]
On substituting the values, we get
⇒ [tex]=\frac{11.1}{4.11\times 3.8}[/tex]
⇒ [tex]=\frac{11.1}{15.618}[/tex]
⇒ [tex]=0.7107 \ J/g^{\circ}C[/tex]
Need help pleaseeeeeeeeee help me
Answer:
and I quenot se the question
Explanation:
ok firts you dirent take a god picture
relative mass of MgCl2
Full explanation
Mine answer is coming 59.7
Answer:
Ar(Mg)=24g
Ar(Cl)=35,5 and Cl2=35,5×2=71g
m=24g+71g=95g