5. Which of the following correctly describes the above situation?
6. The final velocity of the two cars after they hit and stick together is:

The equilibrium angle results from the application of the couple M, if The uniform bars, each of mass m, are connected as shown with their rollers of negligible mass confined to move in the vertical and horizontal guides is [tex]2cos^{-M/{2mgb}}[/tex].

In mechanics, a couple is a pair of equal parallel forces that are acting in opposing directions. A couple only has the ability to cause or prevent the turning of the body. The sum of either force's magnitude and the angle between its action lines is used to calculate the turning effect, or moment, of a pair.

Given:

The bars are uniform and each has a mass of [tex]m[/tex].

Use the equilibrium of the system;

∑ M = 0   about the common point,

[tex]M = 2\times m \times g \times b \times cos(\theta/2)[/tex]

[tex]cos(\theta/2) = M / (2mgb)[/tex]

[tex]\theta / 2 =[/tex][tex]cos^{-M/{2mgb}}[/tex]

[tex]\theta =[/tex] [tex]2cos^{-M/{2mgb}}[/tex]

[tex]2cos^{-M/{2mgb}}[/tex]

[tex]2cos^{-M/{2mgb}}[/tex]

[tex]2cos^{-M/{2mgb}}[/tex]

Therefore, the equilibrium angle results from the application of the couple M, if The uniform bars, each of mass m, are connected as shown with their rollers of negligible mass confined to move in the vertical and horizontal guides is [tex]2cos^{-M/{2mgb}}[/tex].

To know more about couple force:

https://brainly.com/question/26491162

#SPJ1

The acceleration on the block of mass 1 kg will be equal to the acceleration due to gravity that is 9.81 m/s².

Acceleration of an object is the rate of change of the velocity of the object with respect to time.

As the string and pulley system is ideal so the tension will be constant throughout the string and thus both of the blocks will move with the same acceleration, suppose the tension is T and the common acceleration is a

Then, 3kg being heavier weight will move downward.

The tension always act towards a direction away from the block.

The net downward force on 3kg block will be (3g − T)

So, the equation of Force will be F = ma or (3g − T)= 3a   ...(1)

Similarly, the net upward force on 1kg block will be (T − 1g)

So, the equation of Force will be F = ma or (T − 1g) = 1a  ...(2)

By adding both these equations 1 and 2.

We get,

2g = 2a

a = g

Therefore, acceleration on the block of 1 kg will be equal to the acceleration due to gravity that is 9.81m/s².

​

Learn more about Acceleration here:

https://brainly.com/question/12550364

#SPJ1

The muzzle velocity of the bullet is 89.4 m/s.

Muzzle is the front end of a firearm, where the projectile exits the barrel. It is an important safety feature, which helps to ensure that the firearm is pointed in a safe direction. Muzzles also help to contain the explosive force of the propellant gas, reducing the recoil of the firearm, and helping to protect the shooter from harmful gases and debris. Some firearms have additional features, such as flash suppressors, which help to reduce the muzzle flash created when the firearm is fired, making it easier to aim in low light conditions.

The muzzle velocity of the bullet can be determined by conservation of momentum. Momentum is defined as the mass of an object multiplied by its velocity. Therefore, the momentum of the bullet (Pbullet) before the collision is equal to the combined momentum of the bullet and the block (Pcombined) after the collision. We can calculate the muzzle velocity of the bullet by rearranging the equation as follows:
Pbullet = Pcombined
mv = (m + M)V
v = (m + M)V/m
where m is the mass of the bullet (0.05 kg), M is the mass of the block (4 kg), V is the velocity of the block after the collision (1.87 m/s), and v is the muzzle velocity of the bullet.
Plugging in the values, we get:|
v = (0.05 + 4) * 1.87/0.05 = 89.4 m/s
Therefore, the muzzle velocity of the bullet is 89.4 m/s.

To learn more about muzzle
https://brainly.com/question/29853818
#SPJ1

Points 2 and 5  is the point the car have the least amount of potential energy. Hence option d is correct.

Potential energy is defined as the energy that an object stores as a result of its position in relation to a zero position. Any object that is raised from rest has energy that can be released at a later time; for this reason, it is referred to as potential energy.

The object has a maximum amount of gravitational potential energy and no kinetic energy at the top of the roller coaster (assumed there is no velocity). The gravitational potential energy of the object decreases and the kinetic energy rises as it starts to descend to the bottom.

Thus, points 2 and 5  is the point the car have the least amount of potential energy. Hence option d is correct.

To learn more about potential energy, refer to the link below:

https://brainly.com/question/24284560

#SPJ1

If a bicycle and rider has a mass of 50kg if the bicycle has an acceleration of 8 m/s during a 100 m spirit then the force applied is 400 N .

Given is ,

mass (m) = 50 kg

acceleration (a) = 8 m/s²

We know,

force = mass × acceleration

∴ F = m × a

∴ F = 50 × 8

∴ F = 400 Newton

Hence, the force applied is 400 N .

Can learn more about applied force from https://brainly.com/question/248293

#SPJ1

(a) The magnitude of A is 14  and magnitude of B is 14.2.

(b) The magnitude of A - B is 19.95.

(c) The sum of A and B is 7i + 18j + 5k

(d) The magnitude of A + B is 19.95.

The magnitude of A and B is calculated as follows;

| A | = √ ( 4² + 6² + 12² )

| A | = 14

| B | = √ ( 3² + 12² + 7² )

| B | = 14.2

The magnitude of A - B is calculated as follows;

A - B = ( 4i + 6j + 12k ) - (3i + 12j - 7k)

A - B = ( i  - 6j + 19 k )

|A-B| = √ (1² + 6² + 19²) = 19.95

The sum of A and B is calculated as follows;

A + B = ( 4i + 6j + 12k ) + (3i + 12j - 7k)

A + B = ( 7i  18j + 5k )

The magnitude of A + B is calculated as follows;

|A+B| = √ (7² + 18² + 5²) = 19.95

Learn more about magnitude of vectors here: https://brainly.com/question/3184914

#SPJ1

A wave group is another name for a wave packet. The concept of superposition allows for this circumstance. According to, the total of both waves is a solution if any two beams are just a response to wave equation.

A wave packet is a condensed train of (classical) waves with different wavelengths or momenta that is constrained to a specific area of space.

a wave packet is created by the superposition of two waves with marginally differing frequencies: The wave packet gets increasingly spatially confined as that the amplitude of the wave rises. Note that the geometry of the wavepacket remains constant.

To know more about wave packet visit:

https://brainly.com/question/13265499

#SPJ4

The electric potential at the fourth corner (point A) is E4 = kQ.[ 2/a2 + 1/a√2 ]

The electric potential is defined as the amount of work energy needed to move a unit of electric charge from a reference point to the specific point in an electric field.

Number of point charges = 3

Using the superposition principle to calculate the net electric field at the fourth point, so

E4 = E1 + E2 + E3

E4 = kQ/a2 + kQ/√(2a2) + kQ/a2

E4 = kQ.[ 1/a2 + 1/√(2a2) + 1/a2 ]

E4 = kQ.[ 2/a2 + 1/a√2 ]

Therefore the electric field at the fourth corner is  E4 = kQ.[ 2/a2 + 1/a√2 ].

Learn more about electric potential at:

https://brainly.com/question/14306881

#SPJ1

Complete question:

Three-point charges are arranged at the corner of a square of side l as shown in Fig. 17-39. what is the potential at the fourth corner (point A)?

The heat transfer by an emitted radiation is calculated using Stefan-Boltzmann law of radiation. The rate of heat transfer is 2.0 × 10⁵ W.

According to Stefan-Boltzmann law of radiation, the heat transfer by an emitted radiation Q/t is related to the absolute temperature T and the area A as:

Q/t =  σe AT⁴

Where σ is the Stefan-Boltzmann  constant e be the emissivity. σ has a value of 5.67 × 10⁻⁸ J/s m² K⁴.

Given that, T = 1450 K

e = 1.0,  A = 0.80 m².

Now, heat transfer Q/t = 5.67 × 10⁻⁸ J/s m² K⁴ × 0.80 m² × (1450 K)⁴

=  2.0 × 10⁵ W.

Therefore, the heat transfer to the surrounding to the radiation is 2.0 × 10⁵ W.

To find more on Stefan-Boltzmann law , refer here:

https://brainly.com/question/14677904

#SPJ1

The magnitude of the shop B is 15.62 m and the direction will de same as given.

Magnitude is defined as the direction and size of an item at its largest. It reveals the absolute or relative size or direction that an object moves when in motion.

The product of vw -  vs determines the relative velocity of a ship to water.

To calculate the magnitude we use formula

Magnitude = √vw² + vs²

Magnitude = √ 12² + 10²

Magnitude = √ 144 + 100

Magnitude = √ 244

Magnitude = 15.62 m

Thus, the magnitude of the shop B is 15.62 m and the direction will de same as given.

To learn more about magnitude, refer to the link below:

https://brainly.com/question/14452091

#SPJ1

​

The square of speed of two car system is 11m/s.

To study about Newton's third law of motion-

https://brainly.com/question/974124

#SPJ4

The force exerted by gravity on a mass of 6.5 kg will be equal to 64 N. Hence, option A is correct.

Any operation that has the ability to alter, maintain, or modify a body's motion is considered a force in mechanics. Isaac Newton's Principia Mathematica has three laws of motion that are usually used to demonstrate the idea of force (1687). A body at rest or consistently moving in a straight path is said to remain in that state before a power is applied to it, according to Newton's first law.

Now, let's find out the force exerted by gravity,

Given,

Mass, m = 6.5 kg

Use the value of acceleration due to gravity (g) as 9.8 m/s².

f = 6.5 × 9.8

f = 63.7 or,

f = 64 N.

Therefore, the force exerted by the gravity will be equal to 64 N.

To know more about Force :

brainly.com/question/13191643

#SPJ1

The magnitude of the net upward force exerted on the leaf by the droplet's surface tension is 1.136 x 10⁻³ N.

The net upward force exerted on the leaf by the droplet's surface tension is calculated by applying the following formula as show below.

Mathematically, the formula for surface tension is given as;

γ = F/L

where;

The vertical component of the force is given as;

Fy = F sinθ

γ = F/L

γ = Fsinθ/L

Fsinθ = γL

F = γL / sinθ

The given parameters;

F = (0.073 x 0.011) / sin135

F = 1.136 x 10⁻³ N

Learn more about net upward force here: https://brainly.com/question/21313437

#SPJ1

The dimensional analysis cannot determine whether the area of a circle is πr2 or 2πr2 because the constant 2 is dimensionless.

Dimensional Analysis :

Dimensional analysis is used to measure objects' dimensions and forms. It aids in our mathematical knowledge of object nature. Along with lengths and angles, it also includes geometrical traits like flatness and straightness. Similarly, only if two physical quantities have the same dimensions can they be equal. Dimensional analysis is the study of the relationship between physical quantities using dimensions and units of measurement. Because it maintains the units' consistency, dimensional analysis is crucial for facilitating accurate mathematical computations.

To learn more about dimensional analysis visit: https://brainly.com/question/13078117

#SPJ4

A bat is flying at a wall and making a constant 1,70 kHz sound. The bat must fly at a speed of 0.8 m/s in order to detect an 8.00 Hz beat frequency.

The frequency of a repeated event is its number of instances per unit time. It differs from angular frequency and is sometimes referred to as sampling rate for clarification. The unit of frequency is hertz (Hz), or one occurrence per second.

The spring constant of a standing human body is approximately 7.5 Hz, and the rate of a sitting position in a cab is typically 4-6 Hz, according to the research that has already been done. Table 1 displays the natural frequencies of the major body parts.

Frequency = 1.70 kHz

New frequency = 8.00 Hz

V = ?

8.00 / 1700 = 2 * v / 340m/s

v = 0.8 m/s

To know more about frequency visit:

https://brainly.com/question/29511477

#SPJ4

Newton's third law states that for every action (force) in nature there is an equal and opposite reaction. If object A exerts a force on object B, object B also exerts an equal and opposite force on object A.

8)The force of gravity pulling down and the force of the table (FRICTION) pushing upwards on the book are of equal magnitude and opposite directions. These two forces balance each other.

9)A man walking on the ground, While walking, a person pushes the ground in the backward direction, and the ground in return pushes the person in the forward direction, thus making them walk.

How does Newton's 3rd law explain how a person walks across a floor?

Newton's third law states that every action has an equal and opposite reaction. This is relevant to walking because when you put your foot on the ground, you are applying force to it. In doing this, the ground also actually applies an equal force onto your foot, in the opposite direction, pushing you forward.

What is an example of Newton's 3rd law?

Examples of Newton's third law of motion are ubiquitous in everyday life. For example, when you jump, your legs apply a force to the ground, and the ground applies an equal and opposite reaction force that propels you into the air. Engineers apply Newton's third law when designing rockets and other projectile devices.

To know more about Newton's third law:

https://brainly.com/question/62770

#SPJ1

The force constant and the work done in stretching the spring with a force of 42.8 N acting on it  is  299.3 N/m and 3.06 J respectively.

To calculate the force constant of the spring, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1 and solve for k

To calculate the work done in stretching the spring, we use the form ula below.

Formula:

Hence, the force constant and the work done in stretching the spring is  299.3 N/m and 3.06 J respectively.

Learn morea about Force constant here: https://brainly.com/question/21257107

#SPJ1

All of the potential energy has been converted to kinetic energy at the base of hills, resulting in greater speed. Potential energy = 735000 J ; kinetic energy = 0 J (option -C) is correct answer.

At the bottom of hills, roller coaster cars always move the fastest. This is connected to the first idea in that at the base of hills, all potential energy has been transformed into kinetic energy, leading to increased speed.

At a height of 0 meters,

Potential energy = mgh

Potential energy = 2,500×9.8×30

Potential energy = 735,000 J

Kinetic energy = 1/2mv²

Kinetic energy = 1/2×2,500×0

Kinetic energy = 0.

To know more about potential energy visit:

https://brainly.com/question/14752224

#SPJ1

Answer:

W= 40 J

P=8 W

Explanation:

solution for work:

w=f d

= 4n (10 m)

= 40 J

Solution for Power

p= w/t

= 40 J/5 s

= 8 W

The properties of manganese oxide, which has two oxygen atoms for every manganese atom, are discussed in this answer.

Learn more about manganese dioxide here:

https://brainly.com/question/10639034

#SPJ1

This assertion is accurate; electromagnetic signals are effectively blocked from entering the cable and causing noise by the braided metal shield.

The study of charge, its forces, and the fields that surround it is known as electromagnetic. Two components of the electromagnetic electric field are electricity and magnetism. In science, electromagnetism is just an interaction that takes place between charged particles. It is also the dominant force in interactions between atoms and molecules and is also the second-strongest of a four basic interaction, after the strong force.

Electromagnets are wire coils with electricity flowing through them. An electromagnet's wire coils act like magnets when an electric current flows through them because moving charges produce magnetic fields.

Consequently, electromagnetic governs much more than only electricity and magnetism. It is the force that holds oppositely charged electrons to oppositely charged atomic nuclei, allowing for the formation of stable atoms and the occurrence of chemistry, including the chemistry that gives rise to life.

To know more about Electromagnetic visit:

https://brainly.com/question/17057080

#SPJ4

Answer:

[tex]\huge\boxed{\sf v = 36 \ m/s}[/tex]

Explanation:

Force = F = 10 N

Mass = m = 2.5 kg

Time = t = ?

Velocity = v = ?

[tex]\displaystyle F=\frac{mv}{t}[/tex]

Put the given data in the above formula.

[tex]\displaystyle 10=\frac{(2.5)v}{9} \\\\10 \times 9 = 2.5v\\\\90=2.5 v\\\\Divide \ 2.5 \ to \ both \ sides\\\\90/2.5=v\\\\36 \ m/s=v\\\\v = 36 \ m/s\\\\\rule[225]{225}{2}[/tex]

Answer: (a) To find the moment of inertia of Jay about his center of mass, we can use the formula I = mr^2, where m is the mass of the object and r is the distance from the center of mass to the point of rotation. Plugging in the values, we get I = 65 kg * (0.10 m)^2 = 0.65 kg*m^2.

(b) To find the moment of inertia of Jay about the axis of rotation of the chair, we need to use the formula I = Icm + md^2, where Icm is the moment of inertia about the center of mass and d is the distance from the center of mass to the axis of rotation. Plugging in the values, we get I = 0.65 kgm^2 + 65 kg * (0.10 m)^2 = 0.65 kgm^2 + 0.65 kgm^2 = 1.30 kgm^2.

(c) To find the angular acceleration of the chair while Jay is in his cylindrical position, we can use the formula alpha = T/I, where T is the torque and I is the moment of inertia. The angular acceleration is given as -0.0700 rad/s^2, so we can rearrange the formula to solve for T: T = I * alpha = 1.30 kg*m^2 * (-0.0700 rad/s^2).

(d) To find the angular acceleration of the chair while Jay is in his second position, we can use the same formula as before: alpha = T/I. The angular acceleration is not given, so we cannot solve for T directly.

(e) To find the moment of inertia of the chair, we can use the formula I = mr^2, where m is the mass of the object and r is the distance from the center of mass to the point of rotation. The mass of the chair is given as 30 kg and the distance from the center of mass to the axis of rotation is not given, so we cannot solve for I directly.

(f) To find the torque due to friction when Jay is in the chair, we can use the formula T = Fd, where F is the force of friction and d is the distance from the axis of rotation to the point of application of the force. The force of friction is not given, so we cannot solve for T directly.

(g) To find the moment of inertia of Jay in his second position, we need to use the formula I = Icm + md^2, where Icm is the moment of inertia about the center of mass and d is the distance from the center of mass to the axis of rotation. The moment of inertia about the center of mass and the distance from the center of mass to the axis of rotation are not given, so we cannot solve for I directly.

(h) To find Jay's angular speed when the timing started, we need to know the time it took for Jay to complete one revolution and the radius of the circle he was rotating around. Both of these values are not given, so we cannot solve for the angular speed directly.

(i) To find Jay's angular speed just before changing positions, we need to know the time it took for Jay to complete one revolution and the radius of the circle he was rotating around. Both of these values are not given, so we cannot solve for the angular speed directly.

(j) To find Jay+Chair's angular momentum just before changing position, we need to know Jay's angular speed and the moment of inertia of Jay+Chair

Ca + 2HCl -----> CaCl2 + H2 is the single-replacement reactions

A single-replacement reaction is defined as a chemical reaction in which one strong element replace the other weak element. This reaction can also be called as Exchange reaction.

The given chemical equation  Ca + 2HCl -----> CaCl2 + H2 is an example of single-replacement reactions  in which Calcium (Ca) is stronger than Hydrogen (H ) and replaces calcium to form bond with Chloride.

Hence, the correct answer for the reaction Ca + 2HCl -----> CaCl2 + H2 is the "single-replacement reactions".

Learn more about Exchange reaction,

https://brainly.com/question/17434463

#SPJ1

The three significant figures are ΔV2-3 = -785 J, W2-3 = 785.7 J and W3-1 = -558.72 J

Number of moles n=0.350

r = 1.40

| ΔV1-2 | = 2180 J   | ΔV2-3| = 785 J

| Δ V3-1 | = 1396 J

From first law of thermodynamic

Q = ΔV + W

Internal Energy increases in this case as the temperature is increasing ΔV is positive and work done in a constant volume process is 0 as

W1-2 = P ΔV = P (O) = O

Q1-2 = Δ V1-2 + W1-2 = ΔV1-2 + O

Q1-2 = 2180 J

Change in internal energy is negative since temperature is decreasing as

R = 8.314 J

Δv2-3 = -785 J

To learn more about significant figures

https://brainly.com/question/29153641

#SPJ4

The momentum of the car is 15030kgm/s

The momentum of a body is the product of the mass of the body and it's velocity. It is a vector quantity and measured in kgm/s.

Momentum is expressed as :

momentum = mass× velocity

using the relation v² = u²+2as to get the velocity of the car.

v² = 0²+2×3.5× 40

v² = 280

v = √280

v = 16.7m/s

from momentum = mass× velocity

= 900× 16.7

= 15030kgm/s

therefore the momentum of the car is 15030kgm/s

learn more about momentum from

https://brainly.com/question/1042017

#SPJ1

Answer:

9.6

Explanation:

v² = u² + 2as

v² = 0 + 2(9.81)(4.7)

v² = 92.214

v = 9.6 m/s

The minimum force of friction required to hold the system of Figure in equilibrium is 50 Newton.

What is frictional force?

Frictional force is the force produced when two surfaces slide against and touch each other. The surface texture and amount of force needing them together have the biggest an impact on these forces. The amount of frictional force is influenced by the object's position and angle.

The forces of adhesion between the sites of contact areas of the surfaces, which are always minutely uneven, are the primary cause of friction between objects. The action of the imperfections of the harder surface tilling across the softer surface shears these "fused" connections, causing friction.

If an object is placed against an object, then the frictional force will be the same as the weight of the object. If an object is pushed against the surface, then the frictional force will be increased and become extra than the weight of the object.

To learn more about frictional force.

https://brainly.com/question/12878672

#SP J4

Refer to the photo taken