(5 pts) pbi2 is insoluble in water with a ksp = 8.49 x 10-9 at 25oc; whereas zni2 is soluble in water.

The balanced chemical equation for the dissociation of MgCl2 is:

MgCl2(s) ⇌ Mg2+(aq) + 2Cl-(aq)

The equilibrium expression for the dissociation reaction is:

Ksp = [Mg2+][Cl-]^2

where Ksp is the solubility product constant, [Mg2+] is the concentration of Mg2+ ions in solution, and [Cl-] is the concentration of Cl- ions in solution.

To calculate the Ksp of MgCl2, we need to first determine the concentration of Mg2+ and Cl- ions in the saturated solution. We can do this by using the given information that 200 g of MgCl2 is required to saturate 1.5 L of solution at 20°C.

The molar mass of MgCl2 is:

MgCl2 = 24.31 + 2(35.45) = 95.21 g/mol

So, the number of moles of MgCl2 in 200 g is:

n = mass / molar mass = 200 g / 95.21 g/mol = 2.10 mol

Since MgCl2 dissociates into one Mg2+ ion and two Cl- ions, the number of moles of Mg2+ ions in the solution is equal to the number of moles of MgCl2:

[Mg2+] = 2.10 mol / 1.5 L = 1.40 M

[Cl-] is twice the concentration of Mg2+ ions:

[Cl-] = 2 × [Mg2+] = 2.80 M

Now we can substitute these values into the Ksp expression to calculate the Ksp:

Ksp = [Mg2+][Cl-]^2 = (1.40 M)(2.80 M)^2 = 11.4

Therefore, the Ksp of MgCl2 at 20°C is 11.4. The units for Ksp depend on the units used for the concentrations. In this case, the units for Ksp are (M) x (M)^2 = M^3.

*IG:whis.sama_ent*

The immediate precursor to (R,R)- and (S,S)-2-ethoxy-2-methylcyclohexanol is 2-methylcyclohexanone. This is because the synthesis of the (R,R)- and (S,S)-2-ethoxy-2-methylcyclohexanol involves a stereospecific reduction of 2-methylcyclohexanone.

The reduction of 2-methylcyclohexanone can be achieved using a chiral reducing agent such as L-selectride, which selectively reduces one enantiomer of the ketone to its corresponding alcohol while leaving the other enantiomer unchanged. This leads to the formation of a mixture of diastereomers, which can be separated using fractional distillation.

The resulting diastereomers can be identified based on their physical properties and spectroscopic data, and the (R,R)- and (S,S)-2-ethoxy-2-methylcyclohexanol can be obtained in high purity through further purification steps.

Therefore, the immediate precursor to (R,R)- and (S,S)-2-ethoxy-2-methylcyclohexanol is 2-methylcyclohexanone, which is stereoselectively reduced to form the desired products.

Know more about diastereomers here:

https://brainly.com/question/27881881

#SPJ11

The solubility-product constant for CaC2O4 at 25 ∘C is 3.7 × 10^-11, expressed with two significant figures.

The solubility-product constant (Ksp) for CaC2O4 can be calculated using the formula:

Ksp = [Ca2+][C2O42-]

Where [Ca2+] and [C2O42-] represent the molar concentrations of the ions in solution. Since the solution is saturated, the concentration of CaC2O4 in the solution is equal to its solubility, which can be calculated as:

solubility = 0.0061 g / 1.00 L = 6.1 × 10^-6 g/L

Since CaC2O4 dissociates into one Ca2+ ion and one C2O42- ion in solution, their concentrations can be expressed as:

[Ca2+] = solubility
[C2O42-] = solubility

Substituting these values into the Ksp expression, we get:

Ksp = (solubility)(solubility) = solubility^2

Ksp = (6.1 × 10^-6 g/L)^2 = 3.7 × 10^-11

Therefore, the solubility-product constant for CaC2O4 at 25 ∘C is 3.7 × 10^-11, expressed with two significant figures.

Learn more about solubility here:

https://brainly.com/question/28170449

#SPJ11

The solubility product constant for calcium oxalate at 25 ∘C is [tex]2.31 × 10^-8,[/tex] expressed in two significant figures. The units for Ksp are [tex](M)^2.[/tex]

The solubility product constant (Ksp) for calcium oxalate [tex]CaC_{2}O_{4}[/tex] can be calculated using the given information as follows:

[tex]CaC_{2}O_{4}(s) \rightleftharpoons Ca^{2+}(aq) + C_{2}O_{4}^{2-}(aq)[/tex]

The equilibrium expression for the dissociation of calcium oxalate is:

Ksp = [[tex]Ca^{2+[/tex]][[tex]C2O4^2[/tex]-]

We can use the given mass of [tex]CaC_{2}O_{4}[/tex] and the volume of the solution to calculate the molar solubility of [tex]CaC_{2}O_{4}[/tex]

molar solubility = (0.0061 g) / (40.08 g/mol) / (1.00 L) = 0.000152 M

The molar solubility represents the concentration of the ions in the saturated solution at equilibrium.

Since calcium oxalate dissociates in a 1:1 ratio, the concentration of both [tex]Ca^{2+[/tex] and [tex]C2O4^2[/tex]- ions in the saturated solution is also 0.000152 M.

Substituting these values into the equilibrium expression, we get:

Ksp = [[tex]Ca^{2+[/tex]][[tex]CaC_{2}O_{4}[/tex]] = (0.000152 M)(0.000152 M) = 2.31 × [tex]10^-8[/tex]

Therefore, the solubility product constant for calcium oxalate at 25 ∘C is [tex]2.31 × 10^-8,[/tex] expressed to two significant figures. The units for Ksp are [tex](M)^2.[/tex]

Learn more about calcium oxalate

https://brainly.com/question/23268905

#SPJ4

True - One mole of methane (16 g) reacts with two moles of oxygen (64 g) to produce one mole of carbon dioxide (44 g) and two moles of water (36 g).

False - One molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water. This is because the balanced equation uses moles, not molecules.

True - One gram of methane reacts with two grams of oxygen to produce one gram of carbon dioxide (44 g/mol) and two grams of water (18 g/mol).


1. True: One mole of methane (CH4) reacts with two moles of oxygen (O2) to produce one mole of carbon dioxide (CO2) and two moles of water (H2O).

2. True: One molecule of methane (CH4) reacts with two molecules of oxygen (O2) to produce one molecule of carbon dioxide (CO2) and two molecules of water (H2O).

3. False: One gram of methane reacts with a different mass of oxygen, not two grams, to produce different masses of carbon dioxide and water. This is because you need to consider the molar masses of each substance when discussing mass ratios.

Visit here to learn more about  balanced equation : https://brainly.com/question/7181548
#SPJ11

True - One mole of methane (16 g) reacts with two moles of oxygen (64 g) to produce one mole of carbon dioxide (44 g) and two moles of water (36 g).

False - One molecule of methane reacts with two molecules of oxygen to produce one molecule of carbon dioxide and two molecules of water. This is because the balanced equation uses moles, not molecules.

True - One gram of methane reacts with two grams of oxygen to produce one gram of carbon dioxide (44 g/mol) and two grams of water (18 g/mol).


1. True: One mole of methane (CH4) reacts with two moles of oxygen (O2) to produce one mole of carbon dioxide (CO2) and two moles of water (H2O).

2. True: One molecule of methane (CH4) reacts with two molecules of oxygen (O2) to produce one molecule of carbon dioxide (CO2) and two molecules of water (H2O).

3. False: One gram of methane reacts with a different mass of oxygen, not two grams, to produce different masses of carbon dioxide and water. This is because you need to consider the molar masses of each substance when discussing mass ratios.

Visit here to learn more about  balanced equation : https://brainly.com/question/7181548
#SPJ11

The statement that is not true about the allyl radical is c. It actually undergoes reaction with bromine to give two products.

The unpaired electron density is shared between carbons 1 and 2, which makes it a resonance-stabilized radical. The formation of the allyl radical occurs by abstraction of a hydrogen atom from the methyl group of propene. The carbon-carbon bond lengths are not identical due to resonance delocalization of the unpaired electron density.
Based on the provided terms "allyl radical" and "electron density," the statement that is not true about the allyl radical is:

b. the unpaired electron density is shared between carbons 1 and 2.

In reality, the unpaired electron density in the allyl radical is delocalized across all three carbon atoms, resulting in partial double bond character between carbons 1 and 2 as well as carbons 2 and 3. This delocalization contributes to the stability of the allyl radical.

To know more about unpaired electron density click here:

brainly.com/question/30985234

#SPJ11

The coefficients in the balanced chemical equation directly affect how much of each reactant is first added to the ICF (initial change final) table for a chemical reaction. True

The coefficients represent the mole ratios between the reactants and products in the reaction. Therefore, the amount of each reactant needed to completely react with the other reactants and produce the predicted amount of product can be determined based on these coefficients.

The ICF table is used to keep track of the amounts of each reactant and product at each stage of the reaction, from the initial amounts before the reaction takes place, to the changes that occur during the reaction, and finally to the amounts at equilibrium. The coefficients are essential for correctly predicting the stoichiometry of the reaction and determining the limiting reactant.

Learn more about chemical equation

https://brainly.com/question/19626681

#SPJ4

The probability that a randomly selected multiple birth for women 15-54 years old involved a mother 30 to 39 years old is approximately 0.518.

According to the CDC, the birth rates for women 30 to 34 and 35 to 39 years old are 99.6 and 44.9 per 1,000 births respectively. To find the probability that a multiple birth involves a mother aged 30 to 39 years old, we need to first find the total birth rate for women aged 15-54.

According to the CDC, the birth rate for women aged 15-54 is 59.1 per 1,000 births. We can then find the probability by summing the birth rates for women aged 30 to 34 and 35 to 39 and dividing by the total birth rate for women aged 15-54.

This gives a probability of (99.6+44.9)/1000 ÷ 59.1/1000 = 0.518 (rounded to three decimal places). Therefore, the probability that a randomly selected multiple birth for women 15-54 years old involved a mother 30 to 39 years old is approximately 0.518.

For more questions like Probability click the link below:

https://brainly.com/question/30034780

#SPJ11

The anode half-reaction in this redox reaction is the oxidation of aluminum (Al) metal to form aluminum ions ([tex]Al^{3+}[/tex]):

2Al(s) → 2[tex]Al^{3+}[/tex](aq) + 6e-

This reaction involves the loss of electrons, which are represented on the right-hand side of the equation as part of the aluminum ions.

The ionic equation for the entire redox reaction would be:

2Al(s) + [tex]3Cd_{2}[/tex]+(aq) → 2[tex]Al^{3+}[/tex]+(aq) + 3Cd(s)

In this equation, the aluminum and cadmium ions are represented by their respective aqueous phases ([tex]Al^{3+}[/tex](aq) and [tex]Cd^{2+}[/tex](aq)), while the solid metals are represented by their respective phases (Al(s) and Cd(s)).

Learn more about redox reaction

https://brainly.com/question/2671074

#SPJ4

To synthesize the anesthetic proparcaine, you can follow these steps: 1. Start with the precursors: a benzaldehyde derivative and a diethylaminoethyl bromide.

2. Perform a Grignard reaction: Prepare the Grignard reagent by reacting the diethylaminoethyl bromide with magnesium in an ether solvent. This will form a covalent magnesium bromide complex.
3. Add the benzaldehyde derivative to the Grignard reagent. The Grignard reagent will act as a nucleophile, attacking the carbonyl group of the benzaldehyde derivative.
4. This reaction will produce an intermediate alkoxide, which will then be protonated with a weak acid to form the alcohol.
5. The resulting alcohol is proparcaine, the anesthetic you are synthesizing. You can now draw its structure, keeping in mind not to include hydrogen atoms or lone pairs explicitly.
Note that in this synthesis, you do not have to consider stereochemistry, as mentioned in your question.

To know more about Grignard reaction

brainly.com/question/31323497

#SPJ11

The volume of CO₂ gas that will be formed when 150 g of (CH₃)₂N₂H₄ react with excess N₂O₄ at 473 K and 760 torr is 190 L.

To find the volume of CO₂ gas formed, we need to convert the mass of dimethylhydrazine to moles, use the stoichiometry of the balanced reaction to find the moles of CO₂ formed, and use the Ideal Gas Law (PV=nRT) to find the volume of CO₂ gas.

1. Moles of dimethylhydrazine:
moles = mass / molar mass = 150 g / 60.10 g/mol = 2.50 moles

2. From the balanced reaction: 1 mole of (CH₃)₂N₂H₄ produces 2 moles of CO₂
moles of CO₂ = 2.50 moles (CH₃)₂N₂H₄ × (2 moles CO₂ / 1 mole (CH₃)₂N₂H₄) = 5.00 moles CO₂

3. Ideal Gas Law: PV=nRT
Given: P = 760 torr = 1 atm (as 760 torr = 1 atm), T = 473 K, n = 5.00 moles, R = 0.0821 L*atm/mol*K
V = nRT / P = (5.00 moles) × (0.0821 L*atm/mol*K) × (473 K) / (1 atm) = 193.55 L

The closest answer to 193.55 L is 190 L. Therefore, the correct answer is 190 L.

Learn more about Ideal Gas Law here: https://brainly.com/question/27870704

#SPJ11

The volume of CO₂ gas that will be formed when 150 g of (CH₃)₂N₂H₄ react with excess N₂O₄ at 473 K and 760 torr is 190 L.

To find the volume of CO₂ gas formed, we need to convert the mass of dimethylhydrazine to moles, use the stoichiometry of the balanced reaction to find the moles of CO₂ formed, and use the Ideal Gas Law (PV=nRT) to find the volume of CO₂ gas.

1. Moles of dimethylhydrazine:
moles = mass / molar mass = 150 g / 60.10 g/mol = 2.50 moles

2. From the balanced reaction: 1 mole of (CH₃)₂N₂H₄ produces 2 moles of CO₂
moles of CO₂ = 2.50 moles (CH₃)₂N₂H₄ × (2 moles CO₂ / 1 mole (CH₃)₂N₂H₄) = 5.00 moles CO₂

3. Ideal Gas Law: PV=nRT
Given: P = 760 torr = 1 atm (as 760 torr = 1 atm), T = 473 K, n = 5.00 moles, R = 0.0821 L*atm/mol*K
V = nRT / P = (5.00 moles) × (0.0821 L*atm/mol*K) × (473 K) / (1 atm) = 193.55 L

The closest answer to 193.55 L is 190 L. Therefore, the correct answer is 190 L.

Learn more about Ideal Gas Law here: https://brainly.com/question/27870704

#SPJ11

The hydroxides of the elements in the third period show a general trend in which basicity decreases and acidity increases from left to right, with metallic hydroxides being more basic and non-metallic hydroxides being more acidic. This trend is in line with the observed changes in metallic and non-metallic properties across the period.

The general conclusions that can be drawn concerning the acidity or basicity of the hydroxides of the elements of the third period are as follows:
1. As we move from left to right across the third period, the basicity of the hydroxides generally decreases.
2. Metallic hydroxides are generally basic in nature, while non-metallic hydroxides tend to be acidic.
3. There is a clear trend in metallic and non-metallic properties as shown by the experiment: elements on the left side of the period are more metallic, while elements on the right side are more non-metallic.

To know more about "Hydroxides" refer here:

https://brainly.com/question/3655298#

#SPJ11

The number of moles of Ca(OH)₂ produced from  from 49 grams of H₂O is 1.36 mole

First, we shall determine the mole in 49 grams of water, H₂O. Details below:

Mole = mass / molar mass

Mole of H₂O = 49 / 18

Mole of H₂O = 2.72 moles

Finally, we shall determine the number of mole of Ca(OH)₂ produced. This is illustrated below:

Ca + 2H₂O → Ca(OH)₂ + H₂

From the balanced equation above,

2 moles of H₂O reacted to produce  moles of Ca(OH)₂

Therefore,

2.72 mole of H₂O will react to produce = (2.72 × 1) / 2 = 1.36 mole of Ca(OH)₂

Thus, from the above calculation, we can conclude that the number of mole of Ca(OH)₂ produced is 1.36 mole

Learn more about number of mole:

https://brainly.com/question/13375719

#SPJ1

The compounds listed are not sp'd hybridized at the central atom A) III and IV

Among the compounds listed, the ones that are not sp³d hybridized at the central atom are III and IV. So, the correct option is A) III and IV. To elaborate, the hybridizations for compound I. BF3 - The central atom, B, has three bonding domains and no lone pairs, therefore, its hybridization is sp². II. AsI5 - The central atom, As, has five bonding domains and no lone pairs, thus, its hybridization is sp³d. III. SF4 - The central atom, S, has four bonding domains and one lone pair, as a result, its hybridization is sp³d².

IV. BrF5 - The central atom, Br, has five bonding domains and one lone pair, therefore, its hybridization is sp³d³. V. XeF4 - The central atom, Xe, has four bonding domains and two lone pairs. Consequently, its hybridization is sp³d². Hence, compounds III (SF4) and IV (BrF5) are not sp³d hybridized at the central atom. The compounds listed are not sp'd hybridized at the central atom A) III and IV.

Learn more about hybridizations at:

https://brainly.com/question/14358519

#SPJ11

The enthalpy change of the overall reaction is equal to the sum of the enthalpy changes of the individual steps.

Therefore, the equation that represents the enthalpy changes of the overall reaction is (A) a + b + c + d.
The overall reaction enthalpy change can be found by adding the enthalpy changes of the individual consecutive steps. Therefore, the correct equation representing the enthalpy changes of the overall reaction A2 + BC2 → 2 AC + B is:

(A) ΔH = ΔH1 + ΔH2 + ΔH3 + ΔH4 = a + b + c + d

Learn more about  enthalpy here:

https://brainly.com/question/13996238

#SPJ11

The overall redox reaction is: [tex]2H_{3}HSO_{4}[/tex] + 4HF + [tex]Fe_{2}[/tex]+ + 2I- → [tex]Fel_{2}(s)[/tex] + [tex]6H_{2}O[/tex] + [tex]2SO_{42}[/tex]- + 4F-

To determine the half-reactions, we need to break down the reaction into oxidation and reduction processes.

In this case, the iron ion ([tex]Fe_{2+}[/tex]) is being oxidized to [tex]Fel_{2}[/tex], and the iodide ion (I-) is being reduced to iodine (I2). Therefore, the half-reactions are: Oxidation: [tex]Fe_{2}[/tex]+ → [tex]Fel_{2}[/tex] + 2e-, Reduction: 2I- + 2H+ + 2e- → I2 + [tex]2H_{2}O[/tex]

Note that the hydrogen ions (H+) are used to balance the charges in the reduction half-reaction.

To know more about redox reaction, refer here:

https://brainly.com/question/13293425#

#SPJ11

Therefore, the pH at the equivalence point is 11.06.

The balanced equation for the reaction between HF and NaOH is:

HF(aq) + NaOH(aq) → NaF(aq) + H2O(l)

The stoichiometric point of this reaction will be reached when all of the HF has reacted with an equal amount of NaOH. The moles of HF in the solution can be calculated as:

moles HF = (0.194 mol/L) x (0.04229 L) = 0.00821 mol

At the equivalence point, all of the moles of HF will react with an equal number of moles of NaOH. The moles of NaOH required can be calculated as:

moles NaOH = 0.00821 mol

The volume of NaOH required can be calculated using the molarity and moles of NaOH:

volume NaOH = moles NaOH / molarity NaOH = 0.00821 mol / 0.131 mol/L = 0.0626 L

The pH at the equivalence point can be calculated using the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

At the equivalence point, the solution will contain only the conjugate base (F-) and no acid (HF). Therefore:

[HA] = 0 mol/L

[A-] = moles NaF / total volume of solution = 0.00821 mol / (0.04229 L + 0.0626 L) = 0.0689 mol/L

Substituting into the Henderson-Hasselbalch equation:

pH = 3.13 + log(0.0689/0) = 11.06

Learn more about pH Visit: brainly.com/question/26424076

#SPJ4

The correct answer is a. the 4s electrons.

When Calcium undergoes ionization, it loses two electrons to become a cation with a 2+ charge. These electrons are removed from the highest energy level, which is the 4s orbital. The electrons in the 4s orbital are more loosely held by the nucleus compared to the electrons in the lower energy orbitals, such as 1s, 2s, and 2p. This is because the 4s orbital is farther away from the nucleus and experiences less effective nuclear charge. Thus, the 4s electrons are easier to remove, and they are lost first during ionization. The remaining electron configuration of the Ca2+ ion is [Ar] 3s^23p^6, which corresponds to a noble gas configuration of Argon. This stable configuration is achieved by losing the two 4s electrons, which is energetically favorable for Calcium. Overall, understanding electron configuration and ionization helps explain the chemical behavior of elements and their tendency to form ions.

Know more about Electronic configuration here:

https://brainly.com/question/28741905

#SPJ11

3 methyl 2 hept-yne is the first compound. 2,3- dimethyl- 2- heptene is the second compound. 2,3,4 trimethyl octane is third compound. 2-pentyne is fourth compound.

The first substance, 3-methyl-2-heptyne, contains a triple bond between the second and third carbon atoms and a chain of seven carbon atoms. The third carbon atom is joined to the methyl group.

The second substance, 2,3-dimethyl-2-heptene, has a double bond between the second and third carbon atoms and a chain of seven carbon atoms. The second carbon atom has two methyl groups bonded to it.

Eight carbon atoms make up the chain of the third chemical, 2,3,4-trimethyl-octane, which also has three methyl groups connected to its carbon atoms 2, 3, and 4.

Learn more about carbon atoms at :

https://brainly.com/question/2544405

#SPJ1

a) The pKa of lactic acid is 3.86, and the Ka is 1.38 × 10^-4.

b) If the acid had twice the concentration of the salt, the pH would increase to 3.47.

a) The pH of a solution of equal concentrations of lactic acid and sodium lactate is equal to the pKa of lactic acid, which is 3.86. Using the relationship between Ka and pKa (pKa = -log(Ka)), the Ka of lactic acid can be calculated as 1.38 × 10^-4.

b) If the acid had twice the concentration of the salt, the initial concentration of lactic acid would be twice that of the original solution. Using the Henderson-Hasselbalch equation, pH = pKa + log([salt]/[acid]), the pH of the solution can be calculated.

Since the concentration of the salt remains the same, while the concentration of the acid doubles, the ratio of [salt]/[acid] becomes 0.5. Plugging in the values, pH = 3.86 + log(0.5) = 3.47. Therefore, the pH of the solution would increase to 3.47.

For more questions like pH click the link below:

https://brainly.com/question/15289741

#SPJ11

The amount of Br² formed  is 0.0018 moles under the condition that the duration was 15 seconds and the reaction vessel was 1.50L.

The given balanced chemical equation for the reaction is

2HBr -> H2 + Br2

The concentration of HBr at t = 0 s is:

C(HBr) = n(HBr) / V

here

n(HBr) = number of moles of HBr

V = volume of the reaction vessel.

C(HBr) = (0.025 mol) / (1.50 L)

C(HBr) = 0.0167 M

The concentration of HBr at t = 15 s is:

C(HBr) = n(HBr) / V

here

n(HBr) = number of moles of HBr

V = volume of the reaction vessel.

C(HBr) = (0.0215 mol) / (1.50 L)

C(HBr) = 0.0143 M

The change in concentration of HBr over the first 15 seconds is

ΔC(HBr) = C(HBr)t=0 - C(HBr)t=15

ΔC(HBr) = 0.0167 M - 0.0143 M

ΔC(HBr) = 0.0024 M

Applying stoichiometry, it is  known that for every two moles of HBr that react, one mole of Br2 is formed.

Then, the number of moles of Br2 formed over the first 15 seconds is

n(Br2) = (ΔC(HBr) / 2) × V

n(Br2) = (0.0024 M / 2) × (1.50 L)

n(Br2) = 0.0018 mol

Hence, 0.0018 moles of Br² was formed during the first 15 seconds of the reaction in a 1.50L reaction vessel.

To learn more about stoichiometry

https://brainly.com/question/14935523

#SPJ4

The complete question is

If the volume of the reaction vessel in part (b) was 1.50L, what amount of Br2 (in moles) was formed during the first 15 seconds of the reaction? Consider the following reaction: 2HBr-> H2+Br2

For the first question, we can use the Arrhenius equation: the reaction will proceed 5.50 times faster at 439 K or 166°C than it did at 363 K. the rate constant for the reaction at 71.0°C is 2.10×[tex]10^3 s^{-1}[/tex]

[tex]k2/k1 = exp[(Ea/R)((1/T1)-(1/T2))][/tex]

where k1 and T1 are the rate constant and temperature at which the reaction proceeds at a certain rate, k2 is the desired rate constant, Ea is the activation energy, R is the gas constant, and T2 is the temperature at which we want the reaction to proceed faster.

Let's plug in the given values and solve for T2:

[tex]5.50 = exp[(61.25 kJ/mol)/(8.314 J/(molK))((1/363 K)-(1/T2))][/tex]

T2 = 439 K or 166°C

Therefore, the reaction will proceed 5.50 times faster at 439 K or 166°C than it did at 363 K.

For the second question, we can use the Arrhenius equation to calculate the rate constant, k:  the rate constant for the reaction at

   71.0°C is 2.10×[tex]10^3 s^{-1}[/tex]

[tex]k = A*exp(-Ea/RT)[/tex]

where A is the frequency factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.

Let's plug in the given values:

T = (71.0 + 273.15) K = 344.15 K

Ea = 87.7 kJ/mol = 87,700 J/mol

A = 9.18×[tex]10^1 s^{-1}[/tex]

R = 8.314 J/(mol*K)

k = (9.18×[tex]10^11 s^{-1}[/tex])exp(-((87,700 J/mol)/(8.314 J/(molK)*344.15 K)))\\k = 2.10×[tex]10^3 s^{-1}[/tex]

Therefore, the rate constant for the reaction at 71.0°C is 2.10×[tex]10^3 s^{-1}[/tex].

Learn more about frequency factor

https://brainly.com/question/1065619

#SPJ4

A pound of lithium contains more atoms than a pound of lead due to its lower atomic mass. Lithium has an atomic mass that is almost 30 times less than lead, so it takes a larger number of lithium atoms to make up the same mass as lead atoms.

The number of atoms in a substance is determined by its atomic mass, which is the sum of the masses of all the protons, neutrons, and electrons in an atom. Lithium has an atomic mass of 6.941 atomic mass units (amu), while lead has an atomic mass of 207.2 amu. Therefore, one pound of lithium will contain more atoms than one pound of lead.
To calculate the number of atoms in a pound of each substance, we need to use Avogadro's number, which is 6.022 * 10^{23} atoms per mole. One mole of lithium weighs 6.941 grams, while one mole of lead weighs 207.2 grams. Therefore, one pound of lithium (453.59 grams) is equivalent to 65.33 moles, or 3.93 * 10^{25} atoms. On the other hand, one pound of lead is equivalent to 2.43 moles, or 1.46 * 10^24 atoms.

learn more about lead Refer: brainly.com/question/25046469

#SPJ11

Ba2+ has a molar concentration of 1.05 x 105 M in a saturated solution of BaSO4 in deionized water.

To find the molar concentration of Ba²⁺ in a saturated solution of BaSO₄ in deionized water, you'll need to use the solubility product constant (Kₛₚ) for BaSO₄.

1. Locate the Kₛₚ value for BaSO₄: For BaSO₄, the Kₛₚ value is 1.1 x 10⁻¹⁰.

2. Write the dissociation equation: BaSO₄ (s) ⇌ Ba²⁺ (aq) + SO₄²⁻ (aq)

3. Set up an expression for the Kₛₚ: Kₛₚ = [Ba²⁺][SO₄²⁻]

Since the stoichiometry of the dissociation is 1:1, the molar concentration of Ba²⁺ and SO₄²⁻ will be equal.

4. Substitute the Kₛₚ value and solve for the molar concentration of Ba²⁺:

1.1 x 10⁻¹⁰ = [Ba²⁺][SO₄²⁻] = [Ba²⁺]²

To find the concentration of Ba²⁺, take the square root of both sides:

[Ba²⁺] = √(1.1 x 10⁻¹⁰) ≈ 1.05 x 10⁻⁵ M

So, the molar concentration of Ba²⁺ in a saturated solution of BaSO₄ in deionized water is approximately 1.05 x 10⁻⁵ M.

For more such questions on molar concentration , click on:

#SPJ11

An analyte solution of 50.0mL of 0.050M hydrochloric acid, HCl, titrated against 0.10 M sodium hydroxide, NaOH.  Various ions like Na+, OH-, Cl, etc. are present at various points in this process of titration.

(d) After adding 12.50 mL of NaOH (halfway to the equivalence point), the ions and molecules present in the solution are HCl, NaOH, Na+, OH-, Cl-, and water. Some HCl has reacted with NaOH to form NaCl and H2O, but both reactants are still present.

(e) At the equivalence point (after adding 25.00 mL of NaOH), the ions and molecules present in the solution are Na+, Cl-, and H2O. All the HCl has reacted with NaOH to form NaCl and water.

(f) At the equivalence point, the species that will determine the pH of the solution is water since there are no other acidic or basic species present.

(g) After adding 37.50 mL of NaOH (50% past the equivalence point), the ions and molecules present in the solution are Na+, OH-, Cl-, and H2O. The HCl has been completely neutralized, and excess NaOH is present.

(h) The species that will determine the pH of the solution after adding 37.50 mL of NaOH is the hydroxide ion (OH-), as the excess NaOH makes the solution basic.

Learn more about equivalence point : https://brainly.com/question/2496608

#SPJ11

Reduction of acid chlorides with reducing agents such as lithium aluminum hydride or sodium borohydride gives good yields of aldehydes.

Reduction is a chemical reaction in which a molecule gains one or more electrons, resulting in a decrease in the oxidation state of one or more atoms in the molecule.

Reducing agents lithium aluminum hydride or sodium borohydride are strong enough to reduce acid chlorides to aldehydes but do not reduce the aldehyde further to primary alcohols. The hydrolysis step is important to remove any remaining reducing agent and to convert the intermediate aldehyde aluminum or boron complex to the corresponding aldehyde.

Therefore, the Reduction of acid chlorides with a mild reducing agent such as lithium aluminum hydride (LiAlH4) or sodium borohydride (NaBH4) followed by hydrolysis gives good yields of aldehydes.

Learn more about reducing agent here:https://brainly.com/question/2890416

#SPJ11

Reduction of acid chlorides with reducing agents such as lithium aluminum hydride or sodium borohydride gives good yields of aldehydes.

Reduction is a chemical reaction in which a molecule gains one or more electrons, resulting in a decrease in the oxidation state of one or more atoms in the molecule.

Reducing agents lithium aluminum hydride or sodium borohydride are strong enough to reduce acid chlorides to aldehydes but do not reduce the aldehyde further to primary alcohols. The hydrolysis step is important to remove any remaining reducing agent and to convert the intermediate aldehyde aluminum or boron complex to the corresponding aldehyde.

Therefore, the Reduction of acid chlorides with a mild reducing agent such as lithium aluminum hydride (LiAlH4) or sodium borohydride (NaBH4) followed by hydrolysis gives good yields of aldehydes.

Learn more about reducing agent here:https://brainly.com/question/2890416

#SPJ11

The final temperature of the hydrogen gas sample when its volume has been reduced to 4.50 L is 175.575 K

To solve this problem, we will use Charles's Law, which states that for a given amount of gas at constant pressure, the volume is directly proportional to the temperature. The formula for Charles's Law is:
\frac{V1}{T1 }= \frac{V2}{T2}
where V1 is the initial volume, T1 is the initial temperature in Kelvin, V2 is the final volume, and T2 is the final temperature in Kelvin. First, we need to convert the given temperatures from Celsius to Kelvin:
Initial temperature (T1) = 81.00°C + 273.15 = 354.15 K
Now, we can plug in the given values into the formula:
\frac{(9.10 L) }{ (354.15 K) }= \frac{(4.50 L) }{ T2}
Next, we solve for the final temperature (T2):
T2 = (4.50 L) * \frac{(354.15 K) }{ (9.10 L) }= 175.575 K

learn more about  hydrogen gas Refer: https://brainly.com/question/12745309

#SPJ11

The final temperature of the hydrogen gas sample when its volume has been reduced to 4.50 L is 175.575 K

To solve this problem, we will use Charles's Law, which states that for a given amount of gas at constant pressure, the volume is directly proportional to the temperature. The formula for Charles's Law is:
\frac{V1}{T1 }= \frac{V2}{T2}
where V1 is the initial volume, T1 is the initial temperature in Kelvin, V2 is the final volume, and T2 is the final temperature in Kelvin. First, we need to convert the given temperatures from Celsius to Kelvin:
Initial temperature (T1) = 81.00°C + 273.15 = 354.15 K
Now, we can plug in the given values into the formula:
\frac{(9.10 L) }{ (354.15 K) }= \frac{(4.50 L) }{ T2}
Next, we solve for the final temperature (T2):
T2 = (4.50 L) * \frac{(354.15 K) }{ (9.10 L) }= 175.575 K

learn more about  hydrogen gas Refer: https://brainly.com/question/12745309

#SPJ11

The oxidation number of rhenium (Re) in Mg(ReO4)2 is +7.

The oxidation number of rhenium (Re) in magnesium perrhenate, Mg(ReO4)2, can be determined by assigning oxidation numbers to the other atoms in the compound and using the overall charge of the compound.

The magnesium ion (Mg2+) has a known oxidation state of +2. Oxygen (O) atoms in a compound have a known oxidation state of -2, and there are a total of eight oxygen atoms in the compound (4 per ReO4). So the total oxidation state contributed by the oxygen atoms is:

-2 x 8 = -16

The overall charge of the compound is neutral, so the sum of the oxidation states of all the atoms must be zero:

x (oxidation state of Re) + 2 (+1 for each Mg2+) + (-16 from the oxygen atoms) = 0

Solving for x, we get:

x = +7

Learn more about oxidation.

brainly.com/question/9496279

#SPJ11

During the Paleocene-Eocene Thermal Maximum (PETM), it is estimated that approximately 2,000 to 7,000 gigatons of carbon dioxide (CO2) were released into the atmosphere over a period of several thousand years

The amount of carbon dioxide (CO2)  that entered the atmosphere during the Paleocene-Eocene Thermal Maximum (PETM) is estimated to have been between 2,000 to 7,000 gigatons. The PETM was a period of rapid global warming that occurred approximately 56 million years ago, marked by a massive release of carbon dioxide and other greenhouse gases. This led to significant environmental changes, including higher global temperatures, ocean acidification, changes in the distribution of plant and animal species, and changes in ecosystems. The release of CO2 during this period is thought to have been caused by a variety of factors, including volcanic activity and the melting of methane hydrates on the ocean floor.

Learn more about global warming: https://brainly.com/question/3553382

#SPJ11

The values of q, w, ΔU, and ΔH for this process are:

q = 0

w = -1.30 × 10^3 J

ΔU = -1.30 × 10^3 J

ΔH = 2.16 × 10^3 J

Since the process is adiabatic, the heat transfer (q) is zero. Thus, all the energy transferred is in the form of work (w).

We can use the following equations to calculate the work done, change in internal energy, and change in enthalpy:

w = -nCvΔT

ΔU = q + w = w (since q = 0)

ΔH = ΔU + PΔV

where n is the number of moles of the gas, Cv is the molar specific heat at constant volume, ΔT is the change in temperature, P is the pressure, and ΔV is the change in volume.

Plugging in the given values, we get:

w = -2.50 mol × (3R/2) J/(mol K) × (55.1 - 13.5) K = -1.30 × 10^3 J

ΔU = w = -1.30 × 10^3 J

To calculate ΔH, we need to find ΔV. For an adiabatic process, we have:

PVγ = constant

where γ is the ratio of specific heats (Cp/Cv) for the gas. For an ideal gas, γ = Cp/Cv = 1 + 2/f, where f is the number of degrees of freedom of the gas molecules (f = 3 for a monoatomic gas like helium or neon).

We can use the ideal gas law to relate P, V, n, and T:

PV = nRT

Combining these two equations, we get:

Vγ-1 = constant

Taking the initial and final states to be state 1 and state 2, respectively, we can write:

P1V1γ = P2V2γ

P2/P1 = (V1/V2)γ = (T1/T2)γ/(γ-1)

Plugging in the given values, we get:

P2/P1 = (286.65 K/286.65 K)^1.5/(1.5) × (328.65 K/328.65 K)^1.5/(1.5) = 1.797

Since the process is adiabatic, the gas is compressed, and the final temperature is higher than the initial temperature, we know that P2 > P1. Thus, we can assume that P2 = 1.797P1. Using the ideal gas law, we can find the initial and final volumes:

V1 = nRT1/P1 = 2.50 mol × 8.314 J/(mol K) × 286.65 K/(1.000 atm) = 59.2 L

V2 = nRT2/P2 = 2.50 mol × 8.314 J/(mol K) × 328.65 K/(1.797 atm) = 40.7 L

Thus, ΔV = V2 - V1 = -18.5 L.

Finally, we can calculate ΔH:

ΔH = ΔU + PΔV = -1.30 × 10^3 J + (1.000 atm)(-18.5 L) × (101.325 J/L atm) = 2.16 × 10^3 J

Therefore, the values of q, w, ΔU, and ΔH for this process are:

q = 0

w = -1.30 × 10^3 J

ΔU = -1.30 × 10^3 J

ΔH = 2.16 × 10^3 J

Learn more about adiabatic

brainly.com/question/14930930

#SPJ11

Gases show great uniformity in their behaviour irrespective of their nature. Some useful generalizations have been deduced from the behaviour of gases which are known as gas laws. There are different gas laws like Boyle's law, Charles's law, Avogadros law, etc.

According to Charles's law, at constant pressure the volume of a given mass of gas is directly proportional to the temperature on Kelvin scale. Mathematically, the law is V = constant × T.

The equation for Charles's law is:

1) V₁ / T₁ = V₂ / T₂

V₂ = V₁T₂ / T₁

2.37 × 354 / 298 = 2.81 L

2) Gay-Lussac's law is:

P₁ / T₁ = P₂ / T₂

P₂ = P₁T₂  / T₁

750 × 273 / 323 = 633.90 torr

3) Boyles law is:

P₁V₁ = P₂V₂

P₂ = P₁V₁ / V₂

1.0 × 16  / 7.5 = 2.13 atm

To know more about Charles's law, visit;

https://brainly.com/question/16927784

#SPJ1