Answer:
Salt domes storage has advantages in cost, security, environmental risk, and maintenance. Salt formations offer the lowest cost, most environmentally secure way to store crude oil for long periods of time. Stockpiling oil in artificially-created caverns deep within the rock-hard salt costs historically about $3.50 per barrel in capital costs. Storing oil in above ground tanks, by comparison, can cost $15 to $18 per barrel - or at least five times the expense. Also, because the salt caverns are 2,000-4,000 feet below the surface, geologic pressures will sea; any crack that develops in the salt formation, assuring that no crude oil leaks from the cavern. An added benefit is the natural temperature differential between the top of the caverns and the bottom - a distance of around 2,000 feet; the temperature differential keeps the crude oil continuously circulating in the caverns, giving the oil a consistent quality.
what is the chimestry
Which of the three crowns was made of gold? Explain:
Answer:
I need more context. Maybe add a picture.
Explanation:
Answer:
Crown B
Explanation:
because the density of gold is 19.3 and the density of the crown is 19.29.
ppm is used to describe very small amounts of substance?
parts per million (ppm), parts per billion (ppb) and parts per trillion (ppt) are the most commonly used terms to describe very small amounts of substances. a ppm of a chemical in water means that, in a million units of water, there would only be one unit of the chemical.
Plz answer me will mark as brainliest
Answer:
Compared to the walls of the right ventricle, the walls of the left ventricles are much thicker.
The plasma carries hormones, which are the body's chemical messengers.
how do you write 652870000 in scientific notations
9
6.5287×10Explanation:This is the correct answerA sample of an ideal gas has a volume of 2.23 L at 289 K and 1.05 atm. Calculate the pressure when the volume is 1.08 L and the temperature is 304 K. P= atm
Answer:
2.28 atm
Explanation:
V₁ = 2.33L, V₂ = 1.08L
T₁ = 289K, T₂ = 304K
P₁ = 1.05 atm, P₂ = ?
Where V₁ and V₂ are initial and final volume respectively
T₁ and T₂ are initial and final temperature respectively
P₁ and P₂ are initial and final pressure respectively
The formula to be used here is the general gas equation:
P₁V₁/T₁=P₂V₂/T₂
1.05 × 2.23/289 = P₂ × 1.08/304
P₂ × 1.08 × 289 = 1.05 × 2.23 × 304
P₂ = (1.05 × 2.23 ×304) ÷ (1.08 × 289)
P₂ = 711.82 ÷ 312.12
P₂ = 2.28 atm
Conductivity is an example of what type of property?
Answer:
A physical property is a characteristic of matter that is not associated with a change in its chemical composition. Familiar examples of physical properties include density, color, hardness, melting and boiling points, and electrical conductivity.
Explanation:
Conductivity is an example of a physical property. Physical properties are characteristics of a substance that can be observed or measured without changing the substance's chemical composition.
Conductivity specifically refers to a material's ability to conduct electricity or heat. Materials with high electrical conductivity allow electricity to flow easily through them, while materials with high thermal conductivity conduct heat efficiently.
Examples of conductive materials include metals like copper and aluminium, which are widely used in electrical wiring and heat transfer applications due to their excellent conductivity properties.
Learn more about Conductivity, here:
https://brainly.com/question/33823148
#SPJ6
How many grams of sodium hypochlorite (NaClO)is required to make abuffer with pH= 7.35 if you had 500 mL of a 0.1M solution of hypochlorous acid with pKa=7.54.(Assume the addition of NaClO does not change the volume.)
Answer:
2.4g of NaClO must be added
Explanation:
To find the pH of a buffer we must use H-H equation:
pH = pKa + log [A⁻] / [HA]
Where pH is the pH of the buffer, 7.35
pKa of the HClO buffer is 7.54
[A⁻] could be taken as moles of NaClO
And [HA] moles of the weak acid: 500mL = 0.500L * (0.1mol/L) = 0.05 moles
Replacing:
pH = pKa + log [A⁻] / [HA]
7.35 = 7.54 + log [A⁻] / [0.05moles]
0.6457 = [A⁻] / [0.05moles]
0.03228 moles = Moles of NaClO we need to make the pH = 7.35 buffer.
To convert these moles to grams we use the molar mass of NaClO (74.44g/mol):
0.03228 moles * (74.44g/mol) =
2.4g of NaClO must be added
NEED HELP ASAP !
Which best describes an element?
A. elements are chemicals that are pure substance held together by chemical bonds
B. elements are mixtures of protons, neutrons, and electrons in different combination
C. elements are chemicals that are pure substances represented by symbols that have at least one capital letter
D. elements that are chemicals that are formed when temperature change happens or a precipitate forms
Answer:
A. Elements are pure substances.
Explanation:
Out of all four answers A would be best. Hope this helps.
Answer:
B
Explanation:
I think all options can define element in one form or another but an element is characterized by the atomic number it has i.e you will know it's Carbon due to it's number of protons, neutrons and/or electrons.
Which of the following is true?
A) The closer an electron is to the nucleus, the higher its energy level.
B) The closer an electron is to the nucleus, the lower its energy level.
C) The closer an electron is to the nucleus, the more its energy level fluctuates.
D) There is no relationship between proximity to the nucleus and the energy level of an electron
Answer:
B) The closer an electron is to the nucleus the lower it's energy level.
Explanation:
This is because the attractive force for electrons to the nucleus is stronger. Thus, the orbital energy becomes less.
Violet light has a wavelength of 4.50 x 10-12 m. What is the frequency?*
3 points
1.5 x10^20 1/s
0.0135 1/s
6.77x10^19 1/5
3x10^8 1/s
Green light has a frequency of 6.73 x 1014 1/s. What is the wavelength?*
3 points
2.24x10^6 m
4.46x10^-7 m
2.02 x 10^23 m.
4.95 x 10^-24 m
3 points
What is the energy (Joules) of violet light with a frequency = 3.43 x 10^14
1/s? *
4.54x10^-19 J
1.99x10^-25 J
1.93 x 10^-48 J
2.27 x 10^-19 J
Answer:
Frequency = 6.67x10¹⁹ s⁻¹
Wavelength = 4.46x10⁻⁷m
e = 2.27x10⁻¹⁹J
Explanation:
To convert frequency to wavelength and vice versa we use the equation:
Wavelength = Speed of light / Frequency
Speed ligth is 3x10⁸m/s
For a wavelength of 4.50x10⁻¹²m:
4.50x10⁻¹²m = 3x10⁸m/s / Frequency
Frequency = 3x10⁸m/s / 4.5x10⁻¹²m
Frequency = 6.67x10¹⁹ s⁻¹For a frequency of 6.73x10¹⁴s⁻¹:
Wavelength = 3x10⁸m/s / 6.73x10¹⁴s⁻¹
Wavelength = 4.46x10⁻⁷mAnd energy, e, from frequency, is obtained as follows:
e = h ₓ frequency
Where h is Planck's constant, 6.626x10⁻³⁴J*s
e = 6.626x10⁻³⁴J*s*3.43x10¹⁴s⁻¹
e = 2.27x10⁻¹⁹JA rook is dropped into a graduated cylinder filled with 35 mL of water.
What is the volume of the rock? (Hint: 1 ml water = 1 cm?)
40 cm
O 14 cm
O 5 cm
O 35 cm
Answer:
5 cm³.
Explanation:
The following data were obtained from the question:
Volume of water = 35 mL
Volume of water + Rock = 40 mL
Volume of rock =.?
The volume of the rock can be obtained as follow:
Volume of rock = (Volume of water + Rock) – (Volume of water)
Volume of rock = 40 – 35
Volume of rock = 5 mL
Finally, we shall convert 5 mL to cm³. This can be obtained as illustrated below:
1 mL = 1 cm³
Therefore,
5 mL = 5 cm³
Thus, the volume of the rock is 5 cm³.
Naphthalene is soluble in diethyl ether, but it is insoluble in water regardless of the solution pH. Explain why this compound cannot be readily ionized in aqueous solution.
Answer:
Naphthalene is a non polar substance
Explanation:
In chemistry, the principle of like dissolves like is the over aching principle that controls the dissolution of one substance in another.
Naphthalene dissolves in diethyl ether because diethyl ether is a non polar solvent just as naphthalene is a nonpolar substance.
Since water is a polar solvent, it can not dissolves naphthalene at any pH because naphthalene is a nonpolar substance.
hello I am working on naming compounds and wondering if you could help me figure out the name
Al2(SO4)3 aluminium sulfate
Use the drop-down menu to complete the statement.
Atoms of elements in the same group have the same number of
. This is why they have similar chemical properties.
Answer:
valence electrons
Explanation:
other guy was close enough
Atoms of elements in the same group have the equal number of valence electrons. That is why they have similar chemical properties.
Why does the element in the same group have similar chemical behavior?The chemical properties of elements depend on the number of valence electrons in their outermost shell. Those elements which are placed in the same group in the periodic table have the same number of valence electrons.
Therefore, elements present in the same group of the modern periodic table have similar chemical behavior.
The elements having a similar valence shell electronic configuration in their atoms are arranged in the same group of the periodic table. These valence electrons decide the chemical properties and reactivities of the chemical elements.
For example, all the elements in group 1 of the periodic table have one electron in their valence shell and all the elements present in group 17 have seven electrons in their valence shell.
Learn more about elements with similar chemical behavior, here:
brainly.com/question/5364617
#SPJ5
The specific heat of silver is 0.235 J/gx °C. How much heat is needed to raise the temperature of an 8-gram silver ring by 50°C
Answer:
Heat needed to increase the temperature by 50°C is 94 j.
Explanation:
Given data:
Specific heat of silver = 0.235 j/g.°C
Heat needed to increase temperature = ?
Mass of silver = 8 g
Temperature difference = ΔT= 50°C
Solution:
Formula:
q = mcΔT
c = specific heat capacity of substance
Now we will put the values i formula.
q = 8 g× 0.235 J/g.°C× 50°C
q = 94 J
Heat needed to increase the temperature by 50°C is 94 j.
Which of the following correctly lists the five atoms in order of increasing size (smallest to
largest)?
O, F, Mg, S, Ba
Answer:
F - O - S - Mg - Ba
Explanation:
as you move left to right on the periodic table the number of electrons increase.
The correct lists of the five atoms in order of increasing size smallest to
largest is :
D) F - O - S - Mg - Ba
Atomic RadiusThe correct lists of the five atoms in order of increasing size smallest to
largest is F - O - S - Mg - Ba.
The atomic radius of a chemical element may be a degree of the measure of its molecule, as a rule the mean or commonplace remove from the center of the core to the furthest isolated electron.
The arrange will be:
Fluorine(F) (50 pm)Sulfur(S) (100 pm) Magnesium(Mg) (150 pm) Barium(Ba) (215 pm)As you move cleared out to right on the periodic table the number of electrons increment.
Learn more about "Atomic Radius":
https://brainly.com/question/11960714?referrer=searchResults
how do you find protons in an atom?
Answer:
Protons are always found in the nucleus of an atom.
Explanation:
Protons and neutrons make up the nucleus of an atom, which is in the center. The electrons "orbit" the nucleus.
Answer:
The number of protons, neutrons, and electrons in an atom can be determined from a set of simple rules.
Explanation:
The number of protons in the nucleus of the atom is equal to the atomic number (z). The number of electrons in a neutral atom is equal to the number of protons.
How does the motion of particles in the sun’s plasma compare to the motion of particles in a solid?
Particles in both the plasma and a solid move around to fill available space.
Particles in the plasma move randomly, but particles in a solid vibrate in one place.
Particles in the plasma have low kinetic energy, but particles in a solid have high kinetic energy.
Particles in both the plasma and a solid are made up of fast-moving electrons and cations.
Answer:
Particles in the plasma move randomly, but particles in a solid vibrate in one place.
Explanation:
The pOH of an aqueous solution of 0.480 M trimethylamine (a weak base with the formula (CH3)3N) is .
Answer:
Explanation:
Kb of (CH₃)₃N is 7.4 x 10⁻⁵
initial concentration of (CH₃)₃N a is .48 M
(CH₃)₃N + H₂O = (CH₃)₃NH⁺ + OH⁻
a - x x x
x² / (a - x ) = Kb
x is far less than a so a - x can be replaced by a .
x² / a = Kb
x² = a x Kb = .48 x 7.4 x 10⁻⁵ = 3.55 x 10⁻⁵ = 35.5 x 10⁻⁶
x = 5.96 x 10⁻³
pOH = - log ( 5.96 x 10⁻³ )
= 3 - log 5.96
= 3 - .775
= 2.225
give reason deliquescent substance truns into liquid when exposed to atmosphere air
During photosynthesis, plants and some other organisms use energy from the sun to convert (change): carbon dioxide (CO2) and water (H2O) into ____________ (O2) and __________ (C6H12O6)
Answer:
CO2 + H2O → O2 + C6H12O6
CO2 = carbon dioxide
H2O = water
O2 = oxygen
C6H12O6 = glukose
3 letters start from X
Answer:
xanthophyll
xenobiotic
xenon
X group
x-rays
x-ray tube
Electrolysis of water produces its constituent elements, hydrogen and oxygen. This process is represented by the following balanced chemical equation:
2 H2O(l) → 2 H2(g) + O2(g).
If 8.05 grams of oxygen gas was produced in the reaction, how many molecules of water were decomposed?
Do enter the coefficient of the answer only. Do NOT include the unit in final answer.
_______________________________ × 1023 H2O molecules.
Answer:
3.011 × 10²³
Explanation:
Given data:
Mass of oxygen produced = 8.05 g
Molecules of water decomposed = ?
Solution:
Balance chemical equation:
2H₂O → 2H₂ + O₂
Number of moles of oxygen produced:
Number of moles = mass/molar mass
Number of moles = 8.05 g/ 32 g/mol
Number of moles = 0.25 mol
Now we will compare the moles of water with oxygen.
O₂ : H₂O
1 : 2
0.25 : 2×0.25 =0.5 mol
0.5 moles of water were decomposed.
Molecules of water decomposed:
1 mole = 6.022× 10²³ molecules of water
0.5 mol ×6.022× 10²³ molecules of water/ 1mol
3.011 × 10²³ molecules of water
Consider the reaction of 30.0 mL of 0.235 M BaI₂ with 20.0 mL of 0.315 M Na₃PO₄.
Which of the following compounds would be the precipitate that forms?
a) Bal2
b) Na3PO4
c) Ba3(PO4)2
d)Nal
Answer:
C
Explanation:
Because sodium is basically always soluble with any compound, it is between a and c. a is part of the reactant so it cant be A. So C.
The statement, that describes the compounds would be the precipitate that forms in the reaction is "Ba3(PO4)2"
What is precipitate?Precipitate is a solid generated by a change in a solution, usually due to a chemical reaction or a change in temperature that reduces a solid's solubility.
What is compound?The combination of more than one element will be identified ad compound.
When cations and anions in aqueous solution combine to create an insoluble ionic solid called a precipitate, double displacement reactions occur, resulting in the formation of a solid form residue. Except for salts of Group 1 metals and ammonium, salts of phosphates and carbonates ions are insoluble, according to the solubility flow chart. The production of a solid white precipitate is used to demonstrate the insoluble nature of barium phosphate.
Hence the correct option is c.
Learn more about precipitate here,
https://brainly.com/question/18109776
#SPJ2
How many of the 7 traits of living things have
Answer:
What do you mean by this?
Explanation:
Which statement gives an advantage of multicellular organisms?
A. Cells are able to provide support
B. They can reproduce quickly
C. Their size allows them to maintain structure easily
D. They need small amounts of energy
Answer:
A. Cells are able to provide support
What is the final concentration if water is added to 0.25 L of a 8M NaOH solution to make 4.0 L of a diluted NaOH solution?
.25 M NaOH solution
1 M NaOH solution
.5 M NaOH solution
Answer:
0.5 M NaOH solution
Explanation:
Initially, we have 0.25L or 250 mL of 8M NaOH solution
Which means that 1L of this solution would have 8 moles of NaOH
Moles present in 250 mL of solution:
Molarity * Volume( in L)
8 * 0.25 = 2 moles
There is 2 moles of NaOH in 0.25 L of the provided NaOH solution
More water is going to be added to this solution but the number of moles of NaOH will remain the same
now that the solution has a volume of 4L after adding the additional water, we have a 4L solution which contains 2 moles of NaOH
Molarity of the new solution:
Molarity = Number of moles in solution / Volume of solution
Molarity = 2 / 4
Molarity = 0.5 M
The same ball is hit again and experiences a net force of 3.5 N instead. What is the acceleration of the volleyball?
Answer:
I hope this helped :)
Explanation:
a=f/m
a=3.5N/.25 kg
a=14m/s2
The acceleration of the volleyball is 14 m/s²
A force is defined to be a pull or a push acting on an object. The force exerted on an object can be said to be determined if the mass of the object is known.
It can be calculated by using the expression;
Force (F) = mass (m) × acceleration (a)
From the given information;
The net force acting on the ball after it hits again = 3.5 NLet assume that the mass of the ball is 0.25 kg since it is not given∴
The acceleration of the above expression can be computed as:
acceleration (a) = Force (F) / mass (a)
acceleration (a) = 3.5 / 0.25
acceleration (a) = 14 m/s²
Learn more about force here:
https://brainly.com/question/12970081
7. The equation below represents a chemical reaction that occurs in living cells.
CH,26 + 602
6CO2 + 6H,0 + energy
How many atoms are represented in the reactants of this equation?
A=6
B=12
C=24
D=36
Answer:
D
Explanation:
Because i just added all of numbers up
C. 24 if the zero after the 6H, is supposed to be a zero however if it wasnt and u were trying to say h2o it'd be 36