Answer:
Household cleaners, antiseptics and battery juice are examples of toxic chemicals that you cannot consume because they have high acids concentrations. However some are very healthy such as critic acids found in oranges. :) Hope this helped.
The element fluorine has an atomic number of
a. 10
b. 9
c. 19
d. 28
Answer:
B.9
Explanation:
A hydrogen atom absorbs a photon radiation causing an electron to jump from level one to level two. If the photon/radiation has a wavelength of 5.62 x 10^-3 m to calculate the frequency of the radiation absorbed and the energy change of the electron
Answer:
1.
First of all, let's convert the energy of the absorbed photon into Joules:
The energy of the photon can be rewritten as:
where
h is the Planck constant
c is the speed of light
is the wavelength of the photon
Re-arranging the formula, we can solve to find the wavelength of the absorbed photon:
2. 1.24 eV
In this case, when the electron jumps from the n=4 level to the n=3 level, emits a photon with wavelength
So the energy of the emitted photon is given by the formula used previously:
and using
we find
converting into electronvolts,
Explanation:
Convert 1176 mmHg to kPa
Answer:
156.8kPa
Explanation:
The problem here is to convert mmHg to kPa;
We have been given:
1176mmHg and the problem is to convert to kPa;
1000Pa = 1kPa
1 mmHg = 133.322Pa
1176mmHg will give 1176 x 133.322 = 156787.1Pa
To kPa;
156.8kPa
The following diagram shows the bonds that make up potassium acetate.
Answer:
6
Explanation:
ye
What are the products of the combustion of a hydrocarbon?
carbon and oxygen
carbon dioxide and water
carbon and hydrogen
carbon dioxide and hydrogen
Answer:
I think carbon and hydrogen
Answer:
Its carbon and hydrogyen
Explanation:
got it right on edge
Why would one ball accelerate more than the other when pushed with the same amount of force?
What is the volume of 0.128 mol of nitrogen dioxide gas at STP?
A) 0.00571 L
B) 2.87 L
C) 5.89 L
D) 132 L
Answer:
B) 2.87 L
Explanation:
A mole of any gas at STP has a volume of about 22.412 liters. So, 0.128 moles of gas will have a volume of ...
0.128 · 22.412 L ≈ 2.87 L
Answer:
B. 2.87 LExplanation:
the volume of 0.138 mol of nitrogen dioxide gas at STP is equal to...2.87 L/litrePls predict and balance the following Chemical equations 30points (5 per question)
Will mark Brainliest
1. Na2(SO4) (aq) + Ba(NO3)2(aq) -->
2. Na(NO3)(aq) + NH4Cl(aq) -->
4. ZnCl2 (aq) + K (SO4) (aq) -->
5. ZnCl2 (aq) + Na2S (aq) -->
6. Na(C2H3O2) (aq) + Ag(NO3) (aq) -->
Answer:
1. Na2SO4 + Ba(NO3)2 → NaNO3 + BaSO4
2. NaNO3 + NH4Cl → NaCl + NH4NO3
4. Sorry, I don't know
5. Refer to the attachment..
6. NaC2H3O2(aq) + AgNO3(aq) = NaNO3(aq) + AgC2H3O2
Hope it can help you and please mark me as a brainlist...[tex] \huge{\blue{Thank \: you}}[/tex]
Which feature is one of the defining features of a hurricane?
O funnel cloud
O high pressure
O low pressure
O rapid snowfall
Low pressure is one of the defining features of a hurricane. Therefore, the correct option is option C.
Hurricanes are intense tropical storms with spiralling winds, copious amounts of rain, and storm surges. These storms can pose a variety of issues when they hit land because they often occur over warm ocean waters close to the equator. Hurricanes leave a path of destruction in their wake, wrecking everything in their path from homes and infrastructure to creating severe flooding and landslides. The unpredictable nature of hurricanes is among their most worrisome features. Although modern technology and meteorological techniques have given us improved storm tracking and prediction systems, it is still challenging to correctly anticipate a hurricane's exact route and intensity.
To know more about hurricane, here:
https://brainly.com/question/33034641
#SPJ6
Help me please O w O
Answer:
42 km/h
Explanation:
Which statement accurately represents the properties of these moles.. help ASAP, teacher didn’t teach me this
Answer:
1 mole of O₂ has more mass compared to 1 mole of Na
Explanation:
1 mole oxygen atom and 1 mole of Na atom has the same number of particles.
A mole of any substance has the Avogadro number of particles which is
6.02 x 10²³
Mass of a substance = number of moles x molar mass
Molar mass of O₂ = 2(16) = 32g/mol
Molar mass of Na = 23g/mol
Mass of O₂ = 1 x 32 = 32g
Mass of Na = 1 x 23 = 23g
So, 1 mole of O₂ has more mass compared to 1 mole of Na
which part of this chemical process requires energy WILL GIVE BRAINLIEST
Answer:
Its c hope this helps ;)
Explanation:
Answer:
Answer is D
Explanation:
Am smort
Much of the light that a black cloth absorbs is changed to heat. True or false
Answer:
True
Explanation:
Hope this helps you complete the quiz :)
The number of valence electrons in lithium is 2.
TRUE
FALSE
Answer:
False
Explanation:
Ok then what im bored
A certain atom has 50 protons and 69 neutrons. Which statement(s) below are true about this atom? Choose ALL that apply.
this atom is an atom of thulium (Tm)
m this atom has a mass of 69 amu
this atom is an isotope of tin-120
m this atom has an atomic number of 50
Answer:
D.) This atom has an atomic number of 50
Explanation:
A is wrong because we determine the type of atom by their number of protons, not the number of neutrons. This makes the atom Tin (Sn).
B is wrong because both protons and neutrons contribute to the weight of an atom, not just neutrons
C is wrong because the correct name for this isotope would be tin-119, which is calculated by adding the protons and neutrons
D is correct because isotopes of the same element always share the same atomic number
if you heat a liquid measure the temperature to which it boils what am I measuring
And this one please thank you.
Answer:
E
Explanation:
Look at bottom numbers.
90 → 88 + x
it means,
90=88+x
hence x = 2
it is also valid for top numbers.
230=226+y
y = 4
MULTIPLE CHOICE QUESTION
Electrons fill in energy levels in which of the
following ways?
1.Lowest energy level first, so it fills in the inside
rings first
2.Lowest energy level first, so it fills in the
outside rings first
3.Highest energy level first, so it fills in the inside
rings first
4.Highest energy level first, so it fills in the outside
rings first
Answer:
I think the answer is 3. Highest energy level first, so it fills in the inside rings first
Electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons contain been placed.
Which energy levels do electrons fill first?Most of the time, electrons occupy the lower-energy orbitals first, then go on to fill the next higher-energy orbital until all of the electrons have been positioned.
The lowest energy level is always added to initially until it has as many electrons as it can have. The following higher energy level is then filled with electrons, and so on.
The lowest energy level is always filled up with additional electrons first, up to the point where that level can hold no more, and then further electrons are added to the next higher energy level, and so on. A level's total number of orbitals determines how many electrons can be present at that energy.
Therefore, the correct answer is option 3. Highest energy level first, so it fills in the inside rings first.
To learn more about Electrons refer to:
https://brainly.com/question/860094
#SPJ2
If we react 5.4g of sodium chloride with an unknown amount of fluorine gas, we produce 4.9g of sodium fluoride and 3.7g chlorine gas. How much fluorine was consumed in the reaction?
Answer:
4.43 g
Explanation:
The reaction between sodium chloride and flourine gas is given as;
NaCl + F2 --> NaF + Cl2
From the stochiometry of the equation;
1 mol of NaCl reacts eith 1 mol of F2 to form 1 mol of NaF and Cl2
Mass of 1 mol of F2 = 38g
Mass of 1 mol of sodium flouride, NaF = 42g
This means 38g of flourine reacted with NaCl to form 42g of NaF
xg of F2 would form 4.9g of NaF
38 = 42
x = 4.9
x = 4.9 * 38 / 42
x = 4.43 g
Plss answer the question in the picture. If you actually answer I will give you brainilest!!!
Answer:
hey :)
your answer is D.
Explanation:
To find density, you must divide mass and volume.
8 divided by 4 is 2
6 divided by 6 is 0
4 divided by 2 is 2
hope i helped any :))
what volume of carbon dioxide will be collected at stp when 25.6 g of calcium carbohydrate undergoes decomposition? Balanced reaction: CaCO2 -> CaO + CO2
Answer:
V = 5.74 L
Explanation:
Given data:
Volume of carbon dioxide produced = ?
Temperature and pressure = standard
Mass of calcium carbonate = 25.6 g
Solution:
Chemical equation:
CaCO₃ → CaO + CO₂
Number of moles of calcium carbonate:
Number of moles = mass / molar mass
Molar mass of calcium carbonate = 100 g/mol
Number of moles = 25.6 g/ 100 g/mol
Number of moles = 0.256 mol
Now we will compare the mole of calcium carbonate with carbon dioxide.
CaCO₃ : CO₂
1 : 1
0.256 : 0.256
Volume of CO₂:
PV = nRT
R = general gas constant = 0.0821 atm/L / mol.K
By putting values,
1 atm× V = 0.256 mol × 0.0821 atm/L / mol.K× 273.15 K
V = 5.74 atm/L / 1 atm
V = 5.74 L
Which set of the below elements are in the same period.
1. Li, Be, C, O
2. H, Li, Be
3. F, CI, Br, I
4. H, He, Li, Be
1
Explanation:
because they period two
Answer:
1
Explanation:
1:Krypton gain or lose electrons
2:Strontium gain or lose electrons
3:Xenon gain or lose electrons
Answer:
Krypton gain
strontium lose
xenon neither gain or lose
The concentration of KIO3 in solution A is 0.04 M. Calculate the number of moles of potassium iodate in 1 mL of this solution.
Answer:
Number of moles of KIO₃ = 4.0×10⁻⁵ mol
Explanation:
Given data:
Concentration of solution = 0.04 M
Volume of solution = 1 mL
Number of moles of KIO₃ = ?
Solution:
Molarity = concentration
Molarity = number of moles / volume in L
We will convert the volume into L.
1 mL×1 L /1000 mL
0.001 L
Now we will put the values in formula,
0.04 M = number of moles / 0.001 L
Number of moles = 0.04 M ×0.001 L
Number of moles = 4.0×10⁻⁵ mol
Find the location of lithium (Li) on the periodic table. What type of ion will
lithium form?
A. An ion with a -7 charge
B. An ion with a -1 charge
C. An ion with a +7 charge
D. An ion with a +1 charge
Answer:
D. An ion with a +1 charge
Explanation:
The location of the lithium on the periodic table is in the first row, it is the third element. The type of ion that lithium form is An ion with a +1 charge. The correct option is D.
What is lithium?Lithium is the third element of the periodic table. Its atomic number is three. It is white with a silvery touch. It is a metal that is highly reactive and flammable. The element, lithium, has the highest binding tendency with other elements.
Lithium contains 3 protons and 3 electrons. When it loses a proton, it contains two ions. It is a metal, so it will donate electrons, therefore it will contain 1 + charge.
Thus, the correct option is D. An ion with a +1 charge. Lithium is the third element and is located in the first row of the periodic table.
Learn more about lithium, here:
https://brainly.com/question/4784691
#SPJ5
Please help
I will give a brainliest
THe correct answer is heat
Answer:
hi
Explanation:
heat
4. How many moles in 2.0 x 1023 atoms of H2O?
here.
Answer:
0.33 moles
Explanation:
to find the number of moles,
moles = number of atoms / avogadro's number ie 6.02 x [tex]10^{23}[/tex]
moles = 2.0 x [tex]10^{23}[/tex] / 6.02 x [tex]10^{23}[/tex]
moles = 0.33 mol
Why can Solids Support Objects Easier Than Fluids
Answer:
because the particles in solids are more close together and strong so they would support it better than fluid because fluid particles are spread out
Explanation:
Have A Wonderful Day !!
Due to properties of solid substances, they support objects easier than liquid.
Solids can support objects easier than fluids because in solid, particles are present on fix place as compared to liquid which is not fix and can move from one place to another. In Solid substances, particles are fix so they provides better support to the objects which are placed on them.
While on the other hand, in liquid substances particles are mobile so they are not considered better supporter for objects so we can conclude that due to properties of solid substances, they support objects easier than liquid.
Learn more: https://brainly.com/question/20688004
what is the concentration of a solution which is 2g in 150cm3 in g/dm3
The concentration of a solution : 13.3 g/dm³
Further explanationGiven
mass of solution = 2 g
volume = 150 cm³
Required
The concentration
Solution
The concentration of a substance can be expressed in several quantities such as moles, percent (%) weight/volume,), molarity, molality, parts per million (ppm) or mole fraction. The concentration shows the amount of solute in a unit of the amount of solvent.
Volume conversion : 150 cm³ = 0.15 dm³
the concentration : mass : volume = 2 g : 0.15 dm³ = 13.3 g/dm³
PLEASE HELPP!!
Consider the reaction below.
2 Na + O2 → Na2O2
If 10.0 g of sodium metal reacts with excess oxygen gas how many grams of sodium oxide will be produced?
Show your work below. Make sure to show ALL units and each step of the process:
Answer:
Answer: The correct answer is Option B.
Explanation:
To calculate the number of moles, we use the equation:
\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}Number of moles=Molar massGiven mass ....(1)
For N_2N2 :
Given mass of nitrogen gas = 10 g
Molar mass of nitrogen gas = 28 g/mol
Putting values in above equation, we get:
\text{Moles of iron oxide}=\frac{10g}{28g/mol}=0.357molMoles of iron oxide=28g/mol10g=0.357mol
The given chemical reaction follows:
N_2+O_2\rightarrow 2NON2+O2→2NO
As, oxygen gas is present in excess. Thus, it is considered as an excess reagent and nitrogen is considered as a limiting reagent because it limits the formation of products.
By Stoichiometry of the reaction: