Answer:
230,294.9 I think it's fine just try your past or ask teacher help
7 types of motion you experience through the day.
Answer:
car is in the driveway
water is flowing in the river
a man is. walking in the road
a bird is flying in the sky
a tiger is running in the jungle
a tiger is running to eat a breakfast
A high school chemistry teacher asks four student groups to determine the number of protons, neutrons, and electrons (respectively) present in an ion of Titanium (Ti 2+). Which student group provides the best answer?
Answer:
Electrons - 20
protons - 22
neutrons - 26
Explanation:
Titanium has an atomic number of 22 indicating that the neutral atom has 22 protons.
Ti 2+ has lost two electrons and contains only 20 electrons, 22 protons.
The mass number of titanium is 48. Hence;
Mass number = atomic number + number of neutrons
Since the atomic number is 22 and the mass number is 48
number of neutrons = 48 - 22 = 26 neutrons
1. Under what conditions can potassium bromide conduct electricity?
A only when melted
B. when melted or dissolved in water
C. only when it is in crystal form
D. only when dissolved
Answer:
potassium bromide can only conduct electricity when in an aqueous solution due to the electrostatic force between the ionic bonds
The potassium bromide can conduct electricity when melted or dissolved in water. Therefore, option (B) is correct.
What are ionic compounds?The crystalline solids which are formed by closely packed ions of opposite charge are called ionic compounds. In ionic compounds, the ions are connected with each other by ionic bonds in solis state.
The elements which can gain or lose electrons to attain their nearest noble gas configuration participate in the formation of ionic compounds. The solid ionic compound cannot able to conduct electricity.
In the melted state, the ions of K⁺ and Br⁻ can move from their fixed positions. Therefore, the KBr can conduct electricity when melted or dissolved in water.
The ionic compounds are able to conduct electricity in melted or dissolved in water. Because only in these states the ins can move freely while in the crystalline state the ions cannot move freely to conduct electricity.
Learn more about ionic compounds, here:
https://brainly.com/question/9167977
#SPJ6
help
if you start with a substance as a solid what will happen to the molecules as you add thermal energy (heat)?
Answer: One change of state happens when you add energy to the substance. This change of state is called melting. By adding energy to the molecules in a solid the molecules begin to move quicker and can break away from the other molecules.
Explanation: I hoped that helped!
Question 1
The best alternate headline for this article would be
o Scientists Find 500 Planets Outside Earth's Solar System
O Newly Discovered Exoplanet Has Earth-like Temperatures-Plus Water!
O Scientists Find "Goldilocks Zone" in Space-Neither too hot nor too cold!
Newly Discovered "Goldilocks" Planet Might Be Right for Life
Answer:
by Judith Curry On what we can learn from Goldilocks and The Three Bears ... In planetary science, the 'Goldilocks zone' is terminology for the the band ... We all know the fairy tale story of “Goldilocks and the three bears”, where GL ... as the discovery that the Earth was not the center of the solar system.
Explanation:
69. Sequencing Arrange these hydrates in order of
increasing percent water content: MgSO;-7H.O.
Ba(OH)2-8H.O. COC1, 6H2O.
In order of increasing percent water content:CoCl₂.6H₂O, Ba(OH)₂.8H₂O, MgSO₄.7H₂O
Further explanation[tex]\tt \%element=\dfrac{Ar~element}{MW~compound}\times 100\%[/tex]
CoCl₂.6H₂O.MW=237.90 g/mol
6H₂O MW = 6.18=108 g/mol
[tex]\tt \%H_2O=\dfrac{108}{237.9}\times 100\%=45.4\%[/tex]
MgSO₄.7H₂O.MW=246.48 g/mol
MW 7H₂O = 7.18=126 g/mol
[tex]\tt \%H_2O=\dfrac{126}{246.48}\times 100\%=51.1\%[/tex]
Ba(OH)₂.8H₂O MW=315.48 g/mol
MW 8H₂O = 8.18=144 g/mol
[tex]\tt \%H_2O=\dfrac{144}{315.48}\times 100\%=45.6\%[/tex]
What is it called when scientists in the same or similar field of study judge the quality of a fellow scientist’s scientific claim?
describe the Rutherford model... and and what are its limitation...
going offline forever ✌️
Answer:
Limitations of Rutherford Atomic Model
Although the Rutherford atomic model was based on experimental observations it failed to explain certain things. Rutherford proposed that the electrons revolve around the nucleus in fixed paths called orbits. ... Ultimately the electrons would collapse in the nucleus.
Please help me and I’ll give you brainiest!!!!!!!!!
Have a wonderful day!!:)))
Answer:
Explanation:
C
Two sphericle objects have masses of 8000 KG and 1500 KG their centers are separated by a distance of 1.5 M find the gravitational attraction between them
if I am correct I think its I'm am not 100 percent sure but I think this should be the answer
The gravitational force of attraction between them is 3.56 * 10⁻⁴ N
Using the formula of gravitational attraction
F = G*M1M2/d²
where G = 6.67 * 10⁻¹¹ Nm²Kg⁻²
M1 = 8000Kg
M2 = 1500 Kg
F = 6.67 * 10⁻¹¹ * 8000 * 1500 / (1.5)²
F = 3.56 * 10⁻⁴ N
The gravitational force of attraction between them is 3.56 * 10⁻⁴ N
Learn more at: https://brainly.com/question/19082714
PLEASE HELP ASAP
A beach ball has a mass of 5g a volume of 20cm3. What is the object's density?
Answer:0,25 g/cm3 creo
Explanation:densidad es masa entre volumen
Answer:
0.25 g/cm³
Step-by-step explanation:
As we know
The density is given by
Density = Mass / Volume
Putting the values
Density = 5g / 20 cm³
Density = 0.25 g/cm³
Sorry if wrong I'm not great at math!
______ have trees with cones.
A. temperate rainforests
B. boreal forests
C. tropical rainforests
D. temperate deciduous forests
Answer:
D.
Explanation:
a sample of carbon dioxide gas occupies a volume of 20 L at standard temperature and pressure (STP). what will be the volume of a sample of argon gas that has the same number of moles and but tripled the absolute temperature?
Volume of Argon = 59.972 L
Further explanationIn general, the gas equation can be written
[tex]\large {\boxed {\bold {PV = nRT}}}[/tex]
where
P = pressure, atm
V = volume, liter
n = number of moles
R = gas constant = 0.08206 L.atm / mol K
T = temperature, Kelvin
At STP(0 C, 1 atm), 1 mol gas= 22.4 L
so for 20 L
[tex]\tt \dfrac{20}{22.4}=0.893[/tex]
For Argon
P = 1 atm
T = 273 K x 3 =819 K (tripled)
n = 0.893 (the same number of moles)
R = 0.082 L/atm.mol K
[tex]\tt V=\dfrac{nRT}{P}=\dfrac{0.893\times 0.082\times 819}{1}=59.972~L[/tex]
Where is most of the water on earth found? What percentage?
Answer:
The ocean holds about 97 percent of the Earth's water; the remaining three percent is found in glaciers and ice, below the ground, in rivers and lakes. Of the world's total water supply of about 332 million cubic miles of water, about 97 percent is found in the ocean.
wait..if you asking about the country it's Brazil✌️
Choose the coefficient for blank 1 (in front of C)
___ C + ___ S8 --> ___ CS2
2
1
3
4
Answer:
;l ok
Explanation:
2. Leaves turning brown in the fall
Chemical or Physical or Both
What Evidences show that it’s Chemical, Physical, or Both:
Which of the following is the final stage of development before birth?
a
zygote
b
embryo
c
uterus
d
fetus
Answer:
D. Fetus
Explanation:
How many moles of cesium carbonate will be produced when 5.34 moles of cesium reacts with iron (III) carbonate? (You must write and balance the formula equation!)
Answer:
2.67 moles of cesium carbonate (Cs2CO3).
Explanation:
We'll begin by writing the equation for the reaction. This is illustrated below:
Cs + Fe2(CO3)3 —> Cs2CO3 + Fe
The above equation can be balance as follow:
There are 2 atoms of Fe on the left side and 1 atom on the right side. It can be balance by putting 2 in front of Fe as shown below:
Cs + Fe2(CO3)3 —> Cs2CO3 + 2Fe
There are 3 atoms of C on the left side and 1 atom on the right side. It can be balance by 3 in front of Cs2CO3 as shown below:
Cs + Fe2(CO3)3 —> 3Cs2CO3 + 2Fe
There are 6 atoms of Cs on the right side and 1 atom on the left. It can be balance by putting 6 in front of Cs as shown below:
6Cs + Fe2(CO3)3 —> 3Cs2CO3 + 2Fe
Thus, the equation is balanced.
From the balanced equation above,
6 moles of Cs reacted with 1 mole of Fe2(CO3)3 to produce 3 moles of Cs2CO3.
Finally, we shall determine the moles of cesium carbonate (Cs2CO3) produced by the reaction of 5.34 moles of cesium (Cs). This can be obtained as follow:
From the balanced equation above,
6 moles of Cs reacted to produce 3 moles of Cs2CO3.
Therefore,
5.34 moles of Cs will react to produce = (5.34 × 3)/6 = 2.67 moles of Cs2CO3.
Thus, 2.67 moles of cesium carbonate (Cs2CO3) were produced from the reaction.
Which process creates new cells from existing cells?
A. Cell division
B.Cell limitation
C.Cell addition
D.No answer text provided.
Answer:
the answer is cell division
Explanation:
cell division is the process by which a present cell divides into two or more daughter cells.
the process can also be called cell cycle
how can the molar mass of a gas can be determined
Most plastics are made from oil or natural gas. One step in making plastics from these resources is called cracking. Cracking is a process that breaks down bigger molecules into smaller ones. In one cracking reaction, ethane breaks down to become ethylene and hydrogen. During this process, thermal energy is absorbed from the surroundings and converted to chemical energy.
True or False
Answer:
true im pretty sure
Explanation:
An astronaut leaves Earth's surface and begins orbiting Earth. How will his departure from Earth affect his mass and weight?
HURRY DONT HAVE MUCH TIME LEFT. Vegetarians do not eat animal products but rather derive their protein from plant sources. Which type of protein do vegetarian food sources lack?
Answer:
b12 and d3
Explanation:
a cube has a length of 1.02 cm and a mass of .001012 kg what is its density
Answer:
d = 9.5× 10⁻⁴ Kg/cm³
Explanation:
Given data:
Length of cube = 1.02 cm
Mass of cube = 0.001012 Kg
Density of cube = ?
Solution:
The length , height and width of cube is always same. Thus the volume of cube is,
Volume = length × height× width
Volume = 1.02 cm × 1.02 cm × 1.02 cm
Volume = 1.06 cm³
Density of cube:
d = 0.001012 Kg /1.06 cm³
d = 9.5× 10⁻⁴ Kg/cm³
A 2.00 L pocket of air at sea level has a pressure of 99.9 atm. What is the
pressure if the pocket of air rises and expands to 8.0 L? *
0.04 atm
O
400 atm
25 atm
52 atm
Answer:
The answer is 25 atmExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
From the question we have
[tex]P_2 = \frac{2 \times 99.9}{8} = \frac{199.8}{8} \\ = 24.975[/tex]
We have the final answer as
25 atmHope this helps you
Answer:
25 atm
Explanation:
Hope I helped
How do limestones that begins as a coral be found on land?
Answer:The limestone began to form millions of years ago, when the land was under the ocean. The rock developed from shells of tiny organisms that float in the ocean. ... However, in the case of reefs, the limestone is produced directly as coral organisms build their skeletons one on top of another.
If I place a balloon in my fridge that initially has a pressure of 1.02 atm and a
temperature of 11.2 °C, what will be the pressure (in atm) of the balloon when it is
fully cooled to 4.00°C by my refrigerator?
Answer:
P₂ = 0.99 atm
Explanation:
Given data:
Initial pressure = 1.02 atm
Initial temperature = 11.2°C
Final pressure = ?
Final temperature = 4.00°C
Solution:
Initial temperature = 11.2°C (11.2+273 = 284.2 K)
Final temperature = 4.00°C (4.00+273 = 277 K)
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
1.02 atm / 284.2 K = P₂/277 K
P₂ = 1.02 atm × 277 K / 284.2 K
P₂ = 282.54 atm. K /293 K
P₂ = 0.99 atm
How many elements are in H
a) 3
b) 2
c) 1
d) 5
Answer: C (1)
Explanation:
H is only the element hydrogen.
eter explores the periodic table and how atoms can combine to form compounds. He uses beads with different sizes and colors as models. Each different type of bead represents atoms from a different element.
How can Peter best use the beads to show how compounds form in nature?
Answer is B- He can arrange the beads into various formations using different colors and sizes multiple times
Explanation: I hope the helped!
Peter can arrange the beads into various formations using different colors and sizes multiple times.
What is Periodic Table ?The periodic table, also known as the periodic table of the elements, is a tabular display of the chemical elements. It is widely used in chemistry, physics, and other sciences, and is generally seen as an icon of chemistry.
In order to show how compounds form in nature, the beads will be assigned to the different elements on the periodic table according to the following arrangements;
The beads representing the elements of each group in the periodic table will all have the same colorThe sizes of the beads within each group will increase from the top to the bottom of the groupWith the above arrangements, it will be possible to show the affinity and proportion of the elements in the compound formed in nature.
Therefore, Peter can arrange the beads into various formations using different colors and sizes multiple times.
Learn more about Periodic Table here ;
https://brainly.com/question/11155928
#SPJ6
I need to find the orbit notation
1. Ne - 1s 2s 2p 3s 3p 4s 3d 4p 5s
Answer:
1s*2 2s*2 2p*6
Explanation:
atomic number of neon is 10 so the s-shell contains 2 electron and p-shell contains 6