Answer:
62 secondsnoExplanation:
The total travel time Suzette experiences is the sum of the times in each hallway. Using
time = distance/speed
we can add the times.
(35.0 m)/(3.50 m/s) +(48.0 m)/(1.20 m/s) +(60 m)/(5.0 m/s)
= 10 s + 40 s + 12 s
= 62 s
It takes Suzette 62 seconds to get to class. She does not beat the bell.
Which of the following is true about the following lever?
Answer:
It will rotate counter-clockwise.
Explanation:
The reason is that there is more Nm on the left side which will lift the lever towards the left side.
The lever would rotate counterclockwise as the torque on the left is higher, so, option B is correct.
What is torque?The force which causes the object to rotate about any axis is called perpendicular distance.
Torque is a twisting or turning force that frequently results in rotation around an axis, which may be a fixed point or the center of mass. The ability of something rotating, such as a gear or a shaft, to overcome turning resistance is another way to think of torque.
Given:
The force on the left side, f = 40 N,
The force on the right side, F = 80 N,
The distance of the pivot from the left side, d = 9 m,
The distance of the pivot from the right side, d = 3 m,
Calculate the torque on both side as shown below,
Torque on the left side = 40 × 9
Torque on the left side = 360 Nm
Torque on the right side = 80 × 3
Torque on the right side = 240 Nm,
Here, the torque on the left side is more,
Thus, the lever will rotate counterclockwise.
To know more about torque:
https://brainly.com/question/28220969
#SPJ2
how much power is used if it takes frank (a 450 N boy ) 3 seconds to run 2 meters ?
Answer:
300
Explanation:
450Newton × 2Meter ÷ 3sec
I need help pls help
A 60.0-kg person rides in elevator while standing on a scale. The elevator is traveling downward but
slowing down at a rate of 2.00 m/s2. The reading on the scale is closest to
The reading on the scale is closest to 708N.
What is weight?The weight of any object is the mass times the acceleration due to gravity on Earth or any other planet.
Weight W = mg
where g = 9.81 m/s²
Given is the mass of person, m = 60kg, and the acceleration downward of the elevator a =2 m/s² , then the weight will be
W = m(a+g)
W = 60x (2+9.81)
W= 60x11.8
W= 708 N
Thus, reading on the scale will be 708N
Learn more about weight.
https://brainly.com/question/10069252
#SPJ2
A balloon is launched straight upward from the edge of a 40 m high cliff with a velocity of 30
m/s. The balloon goes up and barely misses the edge of the cliff on the way down and hits the
ground below.
A.) Determine the overall hang time of the balloon.
B.) How high did the balloon travel above the cliff?
C.) Determine the velocity of the balloon at t = 3 s.
D.) Determine the acceleration of the balloon at t = 3 s.
Answer:
A) t = 7.25 sec
B) 45.92 m above the cliff and 85.92 m counting from ground level
C) about 0.6 m/s
D) The only acceleration is always that of gravity : 9.8 m/s^2
Explanation:
The kinematic equation for the position as a function of time is:
y = 40 + 30 * t - (g/2) t^2
The total time the balloon was in the air is calculated for when the final position is y = 0 (when it touches the ground), that is:
0 = 40 + 30 * t - (g/2) t^2
0 = 40 +30 t - 4.9 t^2
which can be solved for "t" using the quadratic formula, and which renders two different times "t", of which we pick the positive answer: t = 7.25 sec.
For the maximum height, we estimate the time it takes for the balloon to reach the maximum height at which the velocity is zero (changes direction of motion):
vf = vi - g * t
0 = 30 - 9.8 * t
t = 30 / 9.8 = 3.06 seconds
Now we use this value in our position equation and get:
ymax = 40 + 30 (3.06) - 4.9 (3.06)^2
ymax = 85.92 m (from ground level
Therefore, from the cliff (that is at 40 m height) the height is 85.92 - 40 = 45.92 m.
The velocity of the balloon at t = 3 seconds can be calculated with the velocity expression we have been using:
v(t) = vi - g * t
v(3) = 30 - 9.8 (3) = 0.6 m/s
The only acceleration acting on the balloon is always the acceleration due to gravity (g = 9.8 m/s^2)
“Permafrost” is permanently frozen soil and occurs mostly in high latitudes storing a massive
amount of a particular element. As a result of climate change, permafrost is at the risk of melting and
releasing the stored element in the form of a gas. Identify the gas.
a) Ozone
b) Hydrogen
c) Nitrogen oxide
d) Carbon dioxide
an air filled parallel plate capacitor has a capacitor of 1.3 pico farad. the separation of the plates is doubled and wax is inserted between them, the new capacitance is 2.6 pico farad. find the dielectric constant of the wax
Why is our (a person's) gravitational pull NOT as strong as the Earth's gravitational pull
on us?
Gravity doesn't act on us
The Earth is closer to us than the Moon
Our mass doesn't change so the pull is really the same
We are much smaller than the Earth.
Answer:With gravity, two things with mass will want to move toward each other. However, we humans don't feel our gravity pulling on another person because it's not very big, but we do all feel the pull of Earth's gravity all the time - we're not all floating in the air, because that would be happening without Earth's gravity!
Explanation:
An empty 50-g bowl rests on a scale that measures force (in newtons). Water is then poured into the scale from a height of 0.50 m and rate of 10 mL/s. Assuming that the water does not splash as it comes to rest, calculate the reading on the scale at t = 5.0 s
Answer:
1 Newton
Explanation:
Mass of bowl (Mb) = 50 g = 0.05 kg
Initial Velocity (Vo) = 10 mL/s = 10g/s
time (t) = 5.0s
Mass of water (Mw) = 10 g/s * 5s = 50 g = 0.05 kg
*Vob = initial velocity of bowl
*Vow = initial velocity of water
*Vf = final velocity
*g = gravity = 9.8
Conservation of momentum [Inelastic Collision]:
(m1)(Vo1) + (m2)(Vo2) = (M1+M2)Vf(Mw)(Vow) + (Mb)(Vob) = (Mw+Mb)Vf(50g)(10g/s) + (50g)(0) = (50g + 50g)(Vf)Vf = 500/100 = 5g/s = 0.005kg/sImpulse-Momentum Theorem:
Δp = mΔvScale Reading:
Δp + Mw(g) + Mb(g)= (0.05kg + 0.05kg)*(0.05kg/s) + (0.05kg*9.8) +(0.05kg*9.8)= 0.9805 = 1 NewtonHelp me please :)
Answer the following questions to explain the relationship between electricity and magnetism.
• What are the critical components of an electromagnet and what purpose do they each serve?
• How can the strength of an electromagnet be changed?
• Why is an electromagnet considered a temporary magnet?
Answer the following questions about motors and generators.
• What components are needed for a generator to produce electric current?
• Describe motors and generators in terms of energy input and output.
HELP MEEEEEEEE
Decide if the following statements would be found in the Motor or Generator. Answers can be found at the end of the 3.07 Reading.
Statement Motor or Generator?
Answer:
R u from k12?? i am XD add me on discord my username is Hot Boy#1650
Explanation:
Weight of a person's muscles, bones, tendons, and ligaments.
A. flexibility
B. lean mass
C. aerobic
the neuron is considered a (a. Cell. (B.artery. (C. Vein
Answer:
A Cell
Explanation:
An airplane accelerates down a runway at 4.3 m/s2 for 48 s until it finally lifts off the ground. Determine the distance traveled before takeoff.
I
Answer:
x=4953.6m
Explanation:
used formula x=xo+vot+1/2at^2
A truck with a mass of 1330 kg and moving with a speed of 15.0 m/s rear-ends a 805 kg car stopped at an intersection. The collision is approximately elastic since the car is in neutral, the brakes are off, the metal bumpers line up well and do not get damaged. Find the speed of both vehicles after the collision in meters per second.
Answer:
The Speed of the vehicles is 9.34m/s
Explanation:
For an elastic collision the two bodies move with similar velocities after collision
Given
M1=1330kg
V1=15m/s
M2=805kg
V2=0(the car is parked on neutral)
The formula is
M1V1+M2V2=(M1+M2)V
1330*15+805*0=(1330+805)V
19950+0=2135V
2135V=19950
divide both sides by 2135
V=19950/2135
V=9.34m/s
1. According to its computer, a rocket launched
traveled 1200 m, had an average speed of 100.0
m/s. How-long did the trip take?
Answer:
I think it's = 12 seconds
Explanation:
the formula for speed is:
speed=[tex]\frac{distance}{time}[/tex] SO, time is equal to:
time=[tex]\frac{distance}{speed}[/tex]
(sub the numbers in the formula)
distance=1200m, speed=100m/s
time=[tex]\frac{1200}{100}[/tex]
=12 seconds
Is the answer clockwise (CW) or counter clockwise (CCW) ?
On what part of the eye are rods and cones found?
Answer:
retina.
Explanation:
Which would increase the speed of a sound wave?
O A wave passes from a solid to a liquid while remaining the same temperature.
The medium increases in temperature while remaining in the same phase.
The medium decreases in temperature while remaining in the same phase.
O A wave passes from a liquid to a gas while remaining the same temperature.
Answer:
The medium increases in temperature while remaining in the same phase
Explanation:
The speed of a sound wave is increased when the medium increases in temperature while remaining in the same phase.
What is meant by the temperature coefficient of sound wave?The temperature coefficient of a sound wave is defined as the measure of increase in the velocity of the sound wave per unit rise in its the temperature.
Here,
The speed of a sound wave is affected by various factors in the medium through which it propagates. Among them, speed of the wave is mostly influenced by the temperature of the medium.
The speed of a sound wave in a medium is directly proportional to the square root of its absolute temperature. So,
v [tex]\alpha[/tex] √T
where v is thee speed of the sound wave and T is the absolute temperature.
Therefore,
As the temperature of the medium increases, the kinetic energy of the wave particles increases. Thus the speed of the sound wave is increased. As a result, the sound waves will move faster.
Hence,
The speed of a sound wave is increased when the medium increases in temperature while remaining in the same phase.
To learn more about temperature coefficient of sound, click:
https://brainly.com/question/29006600
#SPJ7
2 Why
Force is needed
Answer:
A force can cause an object to accelerate, slow down, remain in place, or change shape. The unit of measure for force is the newton which is abbreviated as "N". One newton is the force needed to accelerate one gram of mass by one centimeter per second squared. Other units of force include the dyne and the pound-force.
How much more effort does it take to lift or push the two objects together compared to just one of the objects by itself?
Answer:
it takes more effort to lift
Explanation:
because your moving the object weights up. While pushing, you only have to over ride the friction of the object against the ground. Because the coefficient of friction between a box and the ground is usually less than 1.
Which resistance training system helps to increase intensity and optimize time
A. Rest-pause
B.Pyramid
C.Occlusion
D.Superset
Answer:
superset
Explanation:
This diagram shows two different forces acting on a skateboarder. The
combined mass of the skateboard and the person is 81.5 kg. Based on this
information, what is the acceleration of the skateboarder?
Air resistance = 11.40 N
mi
Applied force = 52.80
A. 0.51 m/s2 to the left
O B. 1.94 m/s2 to the right
O C. 1.94 m/s2 to the left
O D. 0.51 m/s2 to the right
Answer:
Option D. 0.51 m/s² to the right.
Explanation:
The following data were obtained from the question:
Force applied (Fₐ) = 52.8 N
Force resistance (Fᵣ) = 11.4 N
Mass = 81.5 kg
Acceleration (a) =.?
Next, we shall determine the net force (Fₙ). This can be obtained as follow:
Force applied (Fₐ) = 52.8 N
Force resistance (Fᵣ) = 11.4 N
Net force (Fₙ) =?
Fₙ = Fₐ – Fᵣ
Fₙ = 52.8 – 11.4
Fₙ = 41.4 N to the right
Finally, we shall determine the acceleration of the skateboarder as show below:
Net force (Fₙ) = 41.4 N to the right
Mass = 81.5 kg
Acceleration (a) =..?
F = ma
41.4 = 81.5 × a
Divide both side by 81.5
a = 41.4 / 81.5
a = 0.51 m/s² to the right.
Thus, the acceleration of the skateboarder is 0.51 m/s² to the right.
Answer: .51 to the right
Explanation:
A
6. All other changeable factors that must
be kept the same to ensure a fair test
(what you keep the same).
Answer:
a constant variable?
Explanation:
A constant variable is any aspect of an experiment that a researcher intentionally keeps unchanged throughout an experiment.
Experiments are always testing for measurable change, which is the dependent variable. You can also think of a dependent variable as the result obtained from an experiment. It is dependent on the change that occurs
Thanks to me, you can see straight through the wall. What am I?
Answer:
A window
Explanation:
Answer:
a window.. duh
Explanation:
A tower crane has a hoist motor rated at 159 hp. If the crane is limited to using 72.0 % of its maximum hoisting power for safety reasons, what is the shortest time in which the crane can lift a 5550 kg load over a distance of 89.0 m
Answer:
The value is [tex]t = 56.68 \ s [/tex]
Explanation:
From the question we are told that
The rating of the hoist motor is [tex]k = 159hp = 159 *746 =118614 \ W[/tex]
The percentage of it power used is [tex]z = 0.72 * 118614=85402.08 \ W[/tex]
The mass of the load is m = 5550 kg
The distance is h = 89.0 m
The potential energy required to lift the load through that distance is
[tex]E = m * g * h[/tex]
=> [tex]E = 5550 * 9.8 * 89.0[/tex]
=> [tex]E = 4840710 \ J[/tex]
Generally the time taken is mathematically represented as
[tex]t = \frac{E}{ z}[/tex]
=> [tex]t = \frac{4840710}{ 85402.08}[/tex]
=> [tex]t = 56.68 \ s [/tex]
Help me out on this?
PLEASE HELP EASY MULTIPLE CHOICE!!!!!!!!!!!
Answer:
options C is correct
Explanation:
asking questions is super in this education life
Answer:
option c should be the answer
BRAINLIEST. Agraph is probelow. The graph shows the speed of a car traveling east over a 12 second period. Based on the information in the graph, it can be
that in the first second
Answer:speeding up constantly
Explanation:
The graph between the time and the speed of the car shows that the speed is increasing constantly, so, option C is correct.
What is speed?A moving object's rate of change in distance traveled is measured as speed. Speed is a scalar, which implies it is a measurement with a magnitude but no direction.
A thing that moves quickly and with high speed, covering a lot of ground in a short time. On the other hand, a slow-moving object traveling at a low speed covers a comparatively small distance in the same amount of time. An object with zero speed does not move at all.
Given:
The graph shows the speed of a car traveling east over a 12-second period,
As you can see from the graph, at time t = 0 sec the speed is 10 m/s,
At t = 3 sec, the speed = 15.3 m/s
At t = 6 sec, the speed = 20.3 m/s
Thus, speed is increasing constantly.
To know more about Speed:
https://brainly.com/question/13074982
#SPJ2
Which of the organisms in the food web above is the top level carnivore
Answer:
apex consumers
Explanation:
they are top
12, The error in measurement may occur due to
S
a, inexperience of a person
b, The faulty apparatus
c, Inappropriate method
d, Due to all reasons in a, b and c
Answer:
d, Due to all reasons in a, b and c
Explanation:
All of the reasons from the choices can lead to errors in measurement. An error is an uncertainty introduced to a scientific process.
Errors can be due to the following reasons;
It can be to a poor technician; an inexperienced scientist can introduce serious into their set up. Even when recording their observation, a dearth of experience can lead to error. Faulty apparatus can also lead to errors in measurement. An instrument that is poorly calibrated can also result in measurement errors. An inappropriate scientific method or measuring guidelines can also lead to errors in measurements.