Answer:
b) From the person to the ice, and from the air to the ice
Explanation:
The direction of heat flow in the room is from the person to the ice and from the air to the ice.
The ice is at the lowest temperature.
Heat flows from a place with a higher measure of heat to a place with a lower amount of heat. Since the ice has the lowest heat, there is a thermal gradient set up. Heat will flow from the body and air towards to the ice.A child is prescribed morphine sulfate at 35.0 mcg/kg/dose. The child weighs 85 lb and the solution is available as a 5.0-mg/mL vial. How many milliliters should be injected?
Answer:
270 mL
Explanation:
First we convert the child's weight to kg:
85 lb * [tex]\frac{453.592g}{1 lb} *\frac{1kg}{1000g}[/tex] = 38.56 kgSo the total mass of morphine sulfate that should be injected is:
38.56 kg * 35.0 mg/kg/dose = 1349.6 mg/doseFinally we calculate the volume that should be injected, using the concentration of the available solution:
1349.6 mg ÷ 5.0 mg/mL = 269.9 ≅ 270 mLThe accurate millilitre is 268 mL.
First of all, we must obtain the mass of the child in kilograms;
1 Ib = 0.45 Kg
85 lb = 85 lb × 0.45 Kg/1 Ib
= 38.25 Kg
If 1 Kg takes 35.0 mcg/kg/dose
38.25 Kg takes 38.25 Kg × 35.0 mcg/kg/dose/1 Kg
= 1338.75 mg/dose
Hence;
1338.75 mg/dose/5.0-mg/mL = 268 mL
Learn more about drug dosage: https://brainly.com/question/24793154
The hybrid orbital set used by the central atom in no3- is_____ and why?
a. sp
b. sp3
c. SP2
d. sp3d2
e. sp3d
Answer:
c. SP2
Explanation:
The image in the diagram below shows the structure of NO₃⁻
Nitrogen is the central atom with the electronic configuration of 1s² 2s² 2p³.
So in its outermost shell, it has 3 electrons and the hybridization is sp²
However,
According to Hund's rule:
The ground state of Nitrogen is;
1s² 2s² 2p³
↑↓ ↑ ↑ ↑ ↑
At the excited state when it is attached to 3 different oxygen ions, we have:
1s² 2s² 2p⁵
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑↓ ↑
1s² 2s² 2p⁵
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑↓ ↑
1s² 2s² 2p⁴
O⁻ ---> ↑↓ ↑↓ ↑↓ ↑ ↑
Thus, the 3 sp² orbital lies in a plane and form 3 N - O σ- bond and one π- bond.
A heliox deep-sea diving mixture contains 2.0 gg of oxygen to every 98.0 gg of helium. What is the partial pressure of oxygen when this mixture is delivered at a total pressure of 8.0 atm?
Answer:
The correct answer is 0.020 atm.
Explanation:
Partial pressure is calculated by using the formula,
Partial pressure = Mole fraction × Total pressure
The partial pressure of oxygen in a mixture can be calculated by using the formula,
Mole fraction of oxygen in mixture = Number of moles of oxygen / No. of moles of oxygen + No. of moles of Helium
(1 gg or gigagram is equal to 10⁹ grams)
= 2 × 10⁹/32 /2 × 10⁹/32 + 98 × 10⁹ / 4
= 2.54 × 10⁻³
Now the partial pressure of oxygen = Mole fraction of oxygen × Total pressure of oxygen
= 2.54 × 10⁻³ × 8.0 atm
= 0.02032 atm
= 0.020 atm
element is responsible for the color of light produced.
13
In a flame test, the
a Non-metal
b. Metal
c. Halogen
d. Noble Gas
1. Use the table to
Answer: d
Explanation:because it makes sence i think
What is the normality of a solution prepared by dissolving 75.0 g citric acid, a triprotic acid with molar mass of 192.14 g, in water to make 250. mL solution?
a. 0.0576 N
b. 0.293 N
c. 4.68 N
d. 0.173 N
e. 1.56 N
The normality of the solution which is prepared by dissolving 75 grams of citric acid in water to make 250 ml solution is 4.68 N. Thus, the correct option is C.
What is Normality?Normality is a measure of the concentration of a solution. Normality of a solution is the number of grams equivalent to solute which is present in a given volume of the solution.
Normality of a solution can be calculated by the formula:
N = Gram eq. of solution/ Volume of solution in liters
N = Weight of the solution/ Equivalent weight ×1000/ Volume of solution
N = 75/ 64.4 × 1000/ 250
N = 1.16 × 4
N = 4.64
The normality of the citric acid solution is approximately 4.68 N.
Therefore, the correct option is C.
Learn more about Normality here:
https://brainly.com/question/5558330
#SPJ5
What happens to gas particles when they are compressed?
1)Gas molecules move further apart.
2)Gas molecules get closer together.
3)Some gas molecules move further apart and some move closer together.
Answer:
3)Some gas molecules move further apart and some move closer together.
Explanation:
because When more gas particles enter a container, there is less space for the particles to spread out, and they become compressed. The particles exert more force on the interior volume of the container. This force is called pressure. There are several units used to express pressure.
What do chemical compounds want to obey?
Answer:
Their atoms obey the octet rule
Explanation:
Chemical compounds are formed when atoms combine with one another in order to comply with the octet rule. The octet configuration gives an atom stability in electronic structure.
When atoms become isoelectronic with noble gases, it confers a special stability on them. Therefore, to attain this state, they gain or lose electron or share their electrons with other species.According to VSEPR theory, a molecule with the general formula AX4 E1 will have a __________ molecular shape.a. T-shaped square planar b. seesaw c. trigonal planar d. trigonal bipyramidal e. tetrahedral
Answer:
The answer is "Option e"
Explanation:
The ionic bond arousal system of the outer shells (VSEPR) allows us to determine which one of the feasible solutions are found in the majority of instances. It's also supposed to occupy the space with electrical pairs and also to reduce electrical couple repulsive forces to a minimum, its cheapest electricity framework. This theory can be used for predicting a form of electron pairs with a different mass of a particle's core electrons.
1 What is the total number of valence electrons in the Lewis structure of C104?
electrons
2 Draw a Lewis structure for CI04:
how many moles of NaCl are dissolved in 250 mL of solution if the solution concentration is 0.150 M?
Answer: ?L=250 mL × 1L =0.25L 1000 mL
0.150 M = moles of solute moles of solute = 0.038 mol.
Explanation:
Balance the following redox reaction if it occurs in basic solution. What are the coefficients in front of Br2 and OH- in the balanced reaction?
Br2(l) → BrO3-(aq) + Br(aq)
Possible answers:
Br2 = 3, OH- = 3
Br2 = 2, OH- = 5
Br2 = 3, OH- = 6
Br2 = 1, OH- = 6
Br2 = 1, OH- = 2
The coefficient for Br and OH has been 3 and 6 respectively. Thus option C is correct.
If the reaction takes place in a basic medium, the reaction can be given as:
[tex]\rm Br_2\;+\;OH^-\;\rightarrow\;BrO_3^-\;+\;Br\;+H_2O[/tex]
The coefficient has been placed in the chemical reaction to balance the number of atoms on the product and the reactant side.
The number of atoms of Br on the product side has been 2, and the reactant side has been 2.
The oxygen atoms have been 1 on the reactant side, and 3 on the product side.
It has been balanced as:
[tex]\rm 3\;Br_2\;+\;6\;OH^-\;\rightarrow\;BrO_3^-\;+\;5\;Br^-\;+\;3\;H_2O[/tex]
The coefficient for Br and OH has been 3 and 6 respectively. Thus option C is correct.
For more information about redox reaction, refer to the link:
https://brainly.com/question/13978139
Fill in the Blank
Complete the following sentence. Remember to spell correctly.
The most common biomass is
which people have used to heat their homes for centuries.
A solid substance was tested in the laboratory. The test results are listed below: 1.) dissolves in water 2.) is an electrolyte 3.) melts at a high temperature. Based on these results, the solid substance could be
Answer:
NaCl may be i guess so....
3. Find
out the initial energy level (n) of an electron that results in the emi ssion of light of
wavelength 486 nm in the Balmer series?
Answer:
4
Explanation:
The Balmer series refers to a series of spectral emission lines of the hydrogen atom arising from electronic transitions from any higher level and terminating at the the energy level n= 2.
Using the relation;
1/λ = 1.09737*10^7 (1/2^2 -1/n^2initial)
We now have;
1/486 *10^-9 = 1.09737*10^7 (1/2^2 -1/n^2initial)
0.1875 = 1/2^2 -1/n^2initial
1/n^2initial = 1/2^2 - 0.1875
1/n^2initial = 0.0625
n^2initial = 16
ninitial = 4
The complete combustion of C4H10, will require how many moles of oxygen, O2? ________.
Answer:
2
Explanation:
C⁴H¹⁰ + 2O² —> 4CH²O + H²
determine moles of 1.5g of sodium carbonate.
Answer:
0.014mol
Explanation:
Given parameters:
Mass of Na₂CO₃ = 1.5g
Unknown:
Number of moles = ?
Solution:
Number of moles of a compound is mathematically expressed as;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Molar mass of Na₂CO₃ = 2(23) + 12 + 3(16) = 106g/mol
Number of moles = [tex]\frac{1.5}{106}[/tex] = 0.014mol
What is the correct electron configuration for an element with 5 electrons in
the 3d energy sublevel?
Answer:
[tex]1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^5[/tex]
Explanation:
Hello!
In this case, since electron configurations allows to understand how the electrons in an atoms are arranged depending on the energy levels from 1 to 7 and subshells s, p d and f, considering the attached picture, if we want an element for which the last term in its electrons configuration was 3d⁵, we write:
[tex]1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^5[/tex]
It means that the element has 25 electrons, therefore, it should be manganese.
Best regards!
Answer: it's A the same answer as the dude above me not trying to type all that
Explanation: took the test for ap
A reaction has a theoretical yield of 124.3 g SF6, but only 113.7 g SF6 are obtained in the lab, what is the percent yield of SF6 for this reaction?
Answer:
Percent yield = 91%
Explanation:
Given data:
Theoretical yield of SF₆ = 124.3 G
Actual yield of SF₆ = 113.7 g
Percent yield of SF₆ = ?
Solution:
Formula:
Percent yield = (actual yield / theoretical yield)× 100
By putting values,
Percent yield = (113.7 g/ 124.3 g) × 100
Percent yield = 0.91 × 100
Percent yield = 91%
What would the molecular formula be if potassium and chlorine reacted to form a neutral compound?
compound is formed when potassium reacts with chlorine, which forms ions with a negative charge. The formula of this compound would therefore be KCl.
The molecular formula if potassium and chlorine reacted to form a neutral compound will be KCI.
What happens to potassium if it reacts to chlorine?Potassium metal, K, will burn in the presence of chlorine gas,[tex]Cl_{2}[/tex], to form potassium chloride, KCl, an ionic compound.The chemical equation of this is [tex]2K_{aq}[/tex] + [tex]Cl_{2}[/tex]g→[tex]2KCL_{s}[/tex]We can also picture this reaction as being a redox reaction.When potassium metal is oxidized by chlorine gas to potassium cations, chlorine gas will be reduced to chlorine anions.The potassium cations and the chlorine anions will be combined to produce potassium chloride.To learn about potassium and chlorine reactions, refer to: https://brainly.com/question/20690183
#SPJ2
You perform an electrochemical reaction in which 0.600 mol of Cu are reduced to solid Cu. How many coulombs of charge are transferred?How many electrons are in this amount of charge?
Answer:
[tex]7.22 \times 10^{23}e^{-}[/tex]
[tex]1.16 \times 10^{5}C[/tex]
Explanation:
Step 1: Write the reaction for the electrochemical reduction of copper.
Cu²⁺(aq) + 2 e⁻ → Cu(s)
Step 2: Calculate the number of electrons required in the reduction of 0.600 moles of Cu²⁺
We will use the following relationships:
1 mole of Cu²⁺ requires 2 moles of electrons1 mole of electrons has 6.02 × 10²³ electrons (Avogadro's number)[tex]0.600molCu^{2+} \times \frac{2mole^{-} }{1molCu^{2+} } \times \frac{6.02 \times 10^{23}e^{-} }{1mole^{-}} = 7.22 \times 10^{23}e^{-}[/tex]
Step 3: Calculate the Coulombs corresponding to [tex]7.22 \times 10^{23}e^{-}[/tex]
We will use the following relationships:
1 mole of electrons has 6.02 × 10²³ electrons (Avogadro's number)1 mole of electrons has a charge of 96486 C (Farady's constant)[tex]7.22 \times 10^{23}e^{-} \times \frac{1 mol e^{-}}{6.02 \times 10^{23}e^{-}} \times \frac{96486C}{1 mol e^{-}} =1.16 \times 10^{5}C[/tex]
Suppose you light a Bunsen burner and notice that the flame is very yellow and too short. To get a blue flame, you should ________further. To increase the size of the flame, you should _____________the _____________further.
Answer:
In the given case, to get a blue flame, one should open the air inlet further. To increase the size of the flame one should open the gas regulator further. When one opens the air inlet, more amount of oxygen goes within, and thus, one can get a more intense form of blue flame.
When one opens the gas regulator more concentration of gas goes and the larger the size of flame one gets.
To regulate a bunsen burner follow this procedure
To get a blue flame, you should rotate the wheel of the burner anticlockwise further to reduce the level of oxygen flow.
To increase the size of the flame, you should rotate the wheel clockwise further
The bunsen burner is an apparatus in the laboratory used to carry out experiment when heating of substance is required, hence it is used to add heat to substances, it has a wheel used to regulate the flow of air which is required for combustion, it has a hose which is used to tap gas to the burner
Learn more:
https://brainly.com/question/21641416
Which description best matches Rutherford's model of the atom?
Group of answer choices
A The atoms is a positive sphere with negative electrons embedded in it.
B Electrons orbit the nucleus in set, circular orbits.
C The atoms has a tiny, massive nucleus at its center with electrons surrounding it
D The atoms is a solid, indivisible sphere
Answer:
C The atoms has a tiny, massive nucleus at its center with electrons surrounding it
Explanation:
From the experiment by Rutherford, he suggested a model of the atom where there is a tiny but massive nucleus at the center with electrons surrounding it.
Rutherford found that most of the alpha particles in his gold foil experiment pass through but a few were deflected back. He suggested an atomic model to explain his observation. In this model, the atom has small positively charged center where the mass of the atom is concentrated. Surrounding the nucleus is a large space containing the electrons.Fluorine gas and water vapor react to form hydrogen fluoride gas and oxygen. What volume of oxygen would be produced by this reaction if 2.6em of were consumed? Also, be sure your answer has a unit symbol, and is rounded to the correct number of significant digits
Answer:
The reaction is 2F_2 (g) + 2H_2 O (g) rightarrow 4HF (g) + O_2 (g) 2 moles of fluorine gas (F_2) reacts with 2 moles of water vapors (H_2 O) to produce 4 moles of hy
What factors affect the strength of the electromagnet?
Factors that affect the strength of electromagnets are the nature of the core material, strength of the current passing through the core, the number of turns of wire on the core and the shape and size of the core.
Answer:
an effect could be that the battery could be running out of juice or that there isnt enough wire on a nail on the electromagnet.
Explanation:
My dog is gonna explode in 20 minutes help!!
Answer:
Call 911 then or run away
Explanation:
Calculate the change in entropy when 10.0 g of CO2 isothermally expands from a volume of 6.15 L to 11.5 L. Assume that the gas behaves ideally.
Answer:
The change in entropy of the carbon dioxide is [tex]1.183\times 10^{-3}[/tex] kilojoules per Kelvin.
Explanation:
By assuming that carbon dioxide behaves ideally, the change in entropy ([tex]\Delta S[/tex]), measured in kilojoules per Kelvin, is defined by the following expression:
[tex]\Delta S = m\cdot \bar c_{v}\cdot \ln \frac{T_{f}}{T_{o}}+m\cdot \frac{R_{u}}{M}\cdot \ln \frac{V_{f}}{V_{o}}[/tex] (1)
Where:
[tex]m[/tex] - Mass of the gas, measured in kilograms.
[tex]\bar c_{v}[/tex] - Isochoric specific heat of the gas, measured in kilojoules per kilogram-Kelvin.
[tex]T_{o}[/tex], [tex]T_{f}[/tex] - Initial and final temperatures of the gas, measured in Kelvin.
[tex]V_{o}[/tex], [tex]V_{f}[/tex] - Initial and final volumes of the gas, measured in liters.
[tex]R_{u}[/tex] - Ideal gas constant, measured in kilopascal-cubic meter per kilomole-Kelvin.
[tex]M[/tex] - Molar mass, measured in kilograms per kilomole.
If we know that [tex]T_{o} = T_{f}[/tex], [tex]m = 0.010\,kg[/tex], [tex]R_{u} = 8.315\,\frac{kPa\cdot m^{3}}{kmol\cdot K}[/tex], [tex]M = 44.010\,\frac{kg}{kmol}[/tex], [tex]V_{o} = 6.15\,L[/tex] and [tex]V_{f} = 11.5\,L[/tex], then the change in entropy of the carbon dioxide is:
[tex]\Delta S = \left[\frac{ (0.010\,kg)\cdot \left(8.315\,\frac{kPa\cdot m^{3}}{kmol\cdot K} \right)}{44.010\,\frac{kg}{kmol} } \right]\cdot \ln \left(\frac{11.5\,L}{6.15\,L}\right)[/tex]
[tex]\Delta S = 1.183\times 10^{-3}\,\frac{kJ}{K}[/tex]
The change in entropy of the carbon dioxide is [tex]1.183\times 10^{-3}[/tex] kilojoules per Kelvin.
Study the image. Earth showing air mass movement. Purple and red arrows are moving in a counterclockwise direction. Based on the arrows, in which direction are air masses moving? from west to east from north to south toward the equator toward the middle latitude
Answer:
A
Explanation:
Based on the arrows, the direction the air masses are moving is from west
to east.
What are Air masses?These contains large volume of air which has a uniform temperature and
humidity. Air masses move in the atmosphere through the process known
as Convection.
The movement of the air tells us that the movement is from the Western
part to the Eastern part of the atmosphere.
Read more about Air masses here https://brainly.com/question/440479
what would happen to an atom in its ground state of external energy was applied to the electrons g
Answer:
See explanation
Explanation:
According to Bohr's theory, when external energy is supplied to an atom, its electrons absorb energy and move from a lower energy level to a higher energy level.They quickly return to their original level and re-radiate the absorbed energy as a photo of light.
Hence, when an atom in ground state receives external energy, it becomes excited because energy is transferred to its electrons and they move from lower to higher energy level.
The electron after getting the energy would jump to an orbital further away from the nucleus.
• Ground state refers to the lowest energy state an atom can be at. When an electron in an atom captivates energy it is considered to be in an excited state.
• An excited atom becomes unstable and seem to align itself to move back to its lowest energy state.
• When an atom in its ground state is supplied with an external energy, the energy is absorbed by the atom and the electron becomes excited and jumps to an orbit , that is, distant from the nucleus.
• It can be said that electron attains higher energy state, with the absorption of more energy by the atom, the electron further moves to higher state till it becomes a free electron and no longer remains the part of the atom.
Thus, the electron after getting the energy would jump to an orbital further away from the nucleus.
To know more about:
https://brainly.com/question/13525116
Bob uses SI units to measure his running distance. Which units should he use
Answer:
Distance measures length. For example, the distance of a road is how long the road is. In the metric system of measurement, the most common units of distance are millimeters, centimeters, meters, and kilometers.
Explanation:
Construction crews sometimes use this reaction for welding underwater structures:
Fe2O3 + 2Al → Al2O3 + 2Fe
How many moles of iron (Fe) would be produced if 2.50 mol Fe2O3 react? Make sure to use the correct number of significant figures in your answer.
2.50 mol Fe2O3 =
Answer:
5 moles of iron formed
Explanation:
Given data:
Moles of iron formed = ?
Moles of iron oxide react = 2.50 mol
Solution:
Chemical equation:
Fe₂O₃ + 2Al → Al₂O₃ + 2Fe
Now we will compare the moles of iron with iron oxide.
Fe₂O₃ : Fe
1 ; 2
2.50 : 2×2.50 = 5 mol