2. A peregrine falcon dives 83 m/s to the South-East at a 30 degree angle. What is the x-axis component (East/West) of its velocity? What is the y-axis component (North/South) of its velocity?

Acceleration of the sled is 0.62m/s^2

Acceleration of the child is 0.13m/s^2

They met at 2.6m from the child's initial position

The question is incomplete, the complete question is given below:

a 40.0-kg child and an 8.40-kg sled are on the surface of an icy lake 15.0 meters apart. the child exerts a 5.20 n force on the sled towards them via a rope they’ve attached.(a) What is the acceleration of the sled? m/s2(b) What is the acceleration of the child? m/s2(c) How far from the child's initial position do they meet? m

Part a

Acceleration of the sled:

Mass of sled=8.40kg

Force=5.20N

Acceleration=F/m

                     =5.2/8.4

                      =0.62m/s^2

Part b

Acceleration of the child

Mass of the child=40kg

Force=5.20N

Acceleration=F/m

                    =5.2/40

                    =0.13m/s^2

Part c

Distance from the child's initial position they met

They accelerate towards each other at =0.62+0.13

                                                                 =0.75m/s^2

The time to meet is given by:

We use kinematic equation to find this,

s=ut+1/2at^2

u=0m/s^2

a=0.75m/s^2

s=15m

t=?

15 =0*t+ (1/2) (0.75) t^2

15=(1/2)*0.75t^2

t=6.32 sec

The child moves:

s=ut+1/2at^2, u=0, a=0.13, t=6.32

 =(1/2) (0.13) 6.32^2

 =2.6m

Hence they met at 2.6m from the child's original position

Learn more about kinematics equations here:

https://brainly.com/question/28152546

#SPJ4

The red light is the least refracted by the prism.

Each beam of light with a particular wavelength is slowed differently by the glass. Since violet light has a shorter prism wavelength, it is brake more than the longer wavelengths of red light. accordingly, violet light is bent the most while red light is bent prism the least. Prism on dispersion, the light rays with longer wavelengths bend less than ones with shorter wavelengths. Since red has the longest wavelength, it bends the least. prism Among the 7 constituent colors of light, violet light has the least wavelength and hence it deviates the most, and red light having the largest wavelength deviates the least. Hence, prism the required order is violet, indigo, blue, green, yellow, orange, and red.

So we can conclude that in a prism, the red light is less refracted.

Learn more about prism here: https://brainly.com/question/23963432

#SPJ1

With low-frequency stimulation, the muscle relaxes fully between contractions, resulting in identical twitches twitches per stimulus.

Alpha motor neurons are the motor neurons that innervate the fibers of the skeletal muscle. A number of branches, each innervating a different muscle fiber, are formed as the alpha motor neuron enters the muscle. A motor unit is made up of one alpha motor neuron and all of the muscle fibers it innervates. Small motor units with 3-5 muscle fibers per motor neuron are found in muscles that are involved in delicate, coordinated control. Our hand and eye muscles, as well as those that control eye movement, have very small motor units.

learn more about contractions here :

https://brainly.com/question/984979

#SPJ4

The dependent variable in the experiment in which the weight of each fish is recorded daily is the fish' weight.

A dependent variable is the variable that cannot be controlled in an experiment. An independent variable is the controllable variable/factor in an experiment.

In this experiment, the amount of food fed and how often the food fed can be controlled. The fat gained by the fish and the weight of fish cannot be controlled.

Therefore, in this experiment the dependent variable is weight of fish.

To know more about dependent variable

https://brainly.com/question/1479694

#SPJ1

We may not consider the use of hair samples today because DNA analysis is more modern.

The term DNA refers to the molecule that contains the genetic material of the living things. Hence, we could use the DNA sample to be able to solve very difficult cases. This is because the DNA sample can be able to tell the exact identity of the person that involved,

Before the advent of the DNA, the hair sample was one of the very reliable ways be which evidence could be gathered to solve  crimes. Hence; Modern DNA analyses have made testimony using hair samples obsolete.

Learn more about DNA:https://brainly.com/question/264225

#SPJ1

Missing parts;

Which of the following statements is most true regarding the use of testimony on hair samples in courts today?

Hair samples are replacing DNA as an easily available, go-to source for identifying suspects

Modern changes in the discipline mean that any police officer can provide testimony on hair samples

Modern DNA analyses have made testimony using hair samples obsolete

There’s solid research that should lead us to be skeptical of testimony based on hair samples

150 Watts is the power of 600 J of work completed in 4 seconds.

The rate at which work is completed is referred to as power. It has the following mathematical expression:

[tex]Power = work/time[/tex]

The power can be obtained using the above formula.

From the mentioned query, the following information was observed:

Work = 600 J

Time = 4 s

Power =?

[tex]Power = Work/Time \\Power = 600/4[/tex]

power = 150 watts

Thus, 150 Watts are generated by 600 J of work completed in 4 seconds.

To learn more about power

https://brainly.com/question/1634438

#SPJ4

The wagon and the child inside it make up the system of interest, acceleration equals 0.13 m/s² in the direction of child 1 and Zero acceleration  if friction is 15.0 N.

When two things are moved against one another, instant friction results. The motion will be opposed by the friction, who will also be working against it. When an item is in motion and its velocity changes, the concept of acceleration takes place. Friction, which opposes motion, always lowers acceleration. An object and a surface come into contact and cause friction. The features of the surface and the item, as well as whether or not the object is moving, determine its magnitude. Always, friction works in the opposite direction of motion. As a result, friction cancels out some of the force driving motion when it is there. Therefore, there will be less acceleration and net force.

Learn more about acceleration here:

https://brainly.com/question/2303856

#SPJ4

Electronic Configuration:

Normally, the electronic configuration will be written through the atomic number of the particular element. The electrons fill in this accruing to the energy level and orbitals like s, p, d, and f

The atomic number for the Beryllium is 4. So, the electronic configuration of beryllium is

In option B, the s block has two electrons and both are having an upward spin orientation. This is incorrect, as one must be in the upward orientation and the other will be in the downward orientation

considering simple harmonic oscillator with period r E=1/2mw²A² , T= 1/4mw²A² V = 1/4mw²A² therefore T=V=E/2.

A model with numerous significant applications in both conventional and quantum mechanics is the harmonic oscillator. It acts as a model for the mathematical analysis of a wide range of phenomena, including elasticity, acoustics, AC circuits, molecular and crystal vibrations, electromagnetic fields, and the optical characteristics of matter. A body is referred to be a linear harmonic oscillator or a simple harmonic oscillator when it oscillates about its location along a linear straight line under the influence of a force that is directed towards the mean location and is proportionate to the displacement at any moment from this location. Periodic motion is best demonstrated by this type of oscillation. The period is completely independent of the initial displacement from equilibrium (amplitude of oscillation). The period is unaffected by how far the cart is moved from its equilibrium location. the greatest displacement from the mean position, is the angular speed of the body rotating around in a circle, and t is the duration.

Learn more about harmonic oscillator here:

https://brainly.com/question/28208332

#SPJ4

The coefficients of the variables in each equation can be arranged in a row to create the coefficient matrix. A constant term should always be written on the right in standard form for each equation.

A coefficient matrix, a variable matrix, and a constant matrix can all be used to describe a system of linear equations in matrix form.

Think about the system,

2x+3y=8

5x−y=−2

X and Y are the variables that we have. As a result, the variable matrix can be written as [xy].

The constant terms from the equations, 8 and 2, are on the right side of the equivalence. The first and second rows of the constant matrix are occupied by the two integers in that order since they are the ones that correspond to the first and second equations. The matrix then takes the form [82].

The system is now represented by the equation [2531] [xy] = [82].

Now, the system is denoted as [2531] [xy]=[82].

You can see that the matrix representation is identical to the system of equations using matrix multiplication.

To know more about matrix click on the link:

https://brainly.com/question/11348768

#SPJ4

At constant temperature pressure is inversely proportional to volume, so pressure will increase.

To know more about pressure visit:

https://brainly.com/question/5018408

#SPJ13

Anything thrown from a structure, you have a downward velocity if you throw it down correctly. Additionally, you have little G, thus the ball will keep accelerating. As a result of the acceleration, your final velocity will undoubtedly be much higher.

At the bottom of the structure, a book is currently being dropped; a man is standing nearby with his hands extended in a very linear motion. The height of these arms is also determined, de Unlike this book, which stands at a specific height Big D The weight of this book has increased to two kilograms. two kg. This small D is equivalent to one point five meters on the issue whereas this enormous D is equal to ten meters of wire. seeks to know the speed at which it will reach this person's grasp.

We have a starting energy and a finishing energy. We also have one more energy. We only have gravitational potential energy, after all. What is our final energy, then? The book is falling, so we have kinetic energy, and since Cromwell is not written in it, we have gravitational potential energy. really easy Therefore, we have M g Big D, followed by 1/2 em, the last square, and M g Little T. What should we do next, then? really easy As a result of our velocity solution, the final square's mg big d minus m g tiny d is equal to 1/2.

Therefore, the final square is equal to two times mg big D, minus mg small D, and you merely need to solve for V divide. I divide by an, you square root it, and the result is equal to two mg large D minus two mg little D all over.

Because if you thought about this properly, your speed would increase. You must simply consider anything. anything falls from a structure. If you throw it down correctly, it will move downward at a speed. Furthermore, since you have little G, the ball will keep accelerating. Because it is accelerating, it follows that your final velocity will be much higher.

Both your initial kinetic energy and your gravitational potential energy would be present, as would your final kinetic energy and gravitational potential energy. Because it is at its highest point, you would have a 1/2 M V initial square plus M g Big D and he would have a 1/2 em final square plus M g tiny. +00 It's not a huge D or small D now that it's in their palm. Therefore, the answer would alter. Your speed would actually rise, in my opinion, if you give this some careful thought. You only need to consider anything.

To know more about accelerating click on the link:

https://brainly.com/question/12550364

#SPJ4

A Car is travelling at a speed of 60 km/h and then  accelerates to the velocity 85 km/h than acceleration in 5 sec is given by 18000 km/h² .

Acceleration of body is defined as rate of change of the velocity with respect to the time. Acceleration is a vector quantity it have magnitude as well as direction.

Acceleration =  (final velocity - initial velocity )/ time

Acceleration =  change in velocity / change in time

Given that in the question that the velocity changes from 60 km/h to 85 km/h in 5 sec =( 0.00138 h ) then the acceleration of the car is given as,

Acceleration of the car  = (60 - 85)/0.00138

Acceleration of the car  = 18000 km/h²

Acceleration of the car travelling with the velocity 60 km/h to final the velocity 85 km/h in time 5 sec is given by 18000 km/h².

To learn more about the acceleration refer to the link brainly.com/question/12550364

#SPJ1

The power dissipated by the resistor is 3000W.

Electrical power, or (P), in a circuit is a unit of measurement for the rate at which energy is consumed or produced inside a circuit. The energy produced or delivered by an energy source, such as a voltage, is absorbed by the associated load.

In physics, power is referred to as the rate of energy conversion or transfer over time. The unit of power in the SI system, often known as the International System of Units, is the Watt (W). A single joule per second is one watt. Power was formerly referred to as activity in some research. A scalar quantity is power.

The resistor's power dissipation can be computed as P = I²R

here ,

I = 2 A

R =  750

Therefore P= 2² x 750 W

= 3000W

To learn more about electrical power click on the link below:

https://brainly.com/question/13080026

#SPJ9

1year is the orbital period of this planet.

The orbital period  is the quantity of time a given astronomical object takes to complete one orbit around every other object. In astronomy, it generally applies to planets or asteroids orbiting the solar, moons orbiting planets, exoplanets orbiting different stars, or binary stars.

Kepler's third law - indicates the relationship among the length of an items orbit and the common distance that it's far from the issue it orbits. this could be used  for something clearly orbiting round another factor.

Entire revolution is known as the orbital duration. At 200 km that is approximately ninety minutes. The orbital duration will increase with altitude for two motives. First, as the altitude increases, Earth's gravity decreases, so the orbital speed had to stability it decreases.

Learn more about orbital period here:- https://brainly.com/question/27063414

#SPJ1

The current in each branch of the circuit is 9.5 A and 0 A.

Point B, according to Kirchoff's junction law equation is

i = i₁ + i₂                                                            ......equation 1

Now, according to Kirchoff's Loop law,

Loop 2 is anticlockwise, calculates the current i₂ equation is

21.4 - 50i₂ - 6 - i - 100i₂ = 0

150i₂ + i = 15.4                                                            ......equation 2

Loop 1 is clockwise, calculates the current i₁ equation is

20.5 - 30i₁ - 6 - i - 40i₁ - i₁ = 0

80i₁ + i = 14.5                                                            ........equation 3

substitute equation 1 in equation 3 for the value of i,

81i - 80i₂ = 14.5                                                  .....equation 3

Upon, subtracting equation 3 from equation 2, we get i₂ = 9.5 A

substituting the value of i₂ in equation 3, we get i = 9.5A

Hence on substituting value for i₁, in equation 1 , we get i₁ = 0 A

Hence, the current in each branch of the circuit is 9.5A, 9.5A, 0A

Learn more about circuit numerical here https://brainly.com/question/15996154

#SPJ9

In its orbit, Earth is passing Saturn, with both planets on the same side of the Sun.

What is apparent retrograde motion?

When a planet appears to be moving backward relative to other bodies in its solar system when viewed from a certain angle, this is known as apparent retrograde motion. Motion in the same direction as other bodies is referred to as direct motion or prograde motion.

Mars typically looks to be traveling to the left of the stars. Mars, however, moves right in relation to the stars during "retrograde motion" periods. Truth be told, that is only an illusion that lasts for around two years. In reality, Earth is orbiting the Sun and is currently passing past Mars. Mars is only occulted by Earth once every 26 months since it orbits the Sun more closely and moves quicker than Mars. Mars typically moves from west to east in the sky, but when Earth passes in front of it, we see it move from east to west, creating the impression that it is going backward.

Hence, the earth is passing Saturn in its orbit, with both planets on the same side of the Sun.

To learn more about the apparent retrograde motion link is given below:

https://brainly.com/question/14521976?referrer=searchResults

#SPJ4

Answer: 12.5

Explanation: 50 x 0.25 = 12.5 km

The 50 N force applied at an angle to the crate may be broken down into horizontal and vertical force components. As the angle created by the rope, e, increases from 0° to 90°, the horizontal component, Fx, drops and the vertical force component, Fy, increases.

The components of a force are the force parts acting in perpendicular directions, horizontal and vertical, that combine to give the specified force.

The direction the crate is sliding = The horizontal, x-direction

The force exerted by the man = 50 N

The angle of the rope

The components of the force are therefore:

Horizontal component, Fx = 50 × cos(8)

Vertical component, F₁ = 50 x sin(0)

The value of cos(e) and sin(e) as the angle the rope makes with the horizontal,

e, increases from 0° to 90° are as follows:

Therefore, the horizontal component of the force exerted by the man, Fx has a maximum value at = 0, and decreases to 0, as increases from 0° to 90°.

The vertical component of the force exerted, Fy, has a minimum value of O at → = 0°, and the value of sin(e) and therefore Fy, increases to a maximum of (sin(90°) 1) 50 N as increases to 90°.

Please find attached the graph showing the components of the force, Fx, and Fy, exerted by the man as the angle formed by the rope increases from 0° to 90°

Learn more Resolution of force here:

https://brainly.in/question/31565885

#SPJ4

The magnitude of the total velocity of the package at the moment it is thrown as seen by an observer on the ground is D = 193m/s  15.2s = 2934 m.

What is velocity ?

velocity is the prime indicator of the position as well as the rapidity of the object

Sol-

1. 0.5gt^2 = 2010 m.

4.9t^2 = 2010.

t = 20.3 s. = Fall time.

D = Xot. = 193m/s 20.3s = 3909 m.

2. V=sqrt(Xo^2+Yo^2)=sqrt(193^2+58^2) = 202 m/s.

3. Vot + 0.5gt^2 = 2010 m.

58t + 4.9t^2 = 2010.

4.9t^2 + 58t - 2010 = 0.

Use the  quadratic formula we are get  

t = 15.2 s. = Fall time

D = 193m/s  15.2s = 2934 m.

D = 193m/s  15.2s = 2934 m.

To know more about velocity click-

https://brainly.com/question/25749514

#SPJ9

The magnitude of the magnetic torque on the coil is 9.435 Nm.

A magnetic field exerts a torque that tries to align the normal vector of a loop of current with the magnetic subject. the size of the torque on a loop

The magnetic torque, τ, skilled by using a unmarried particle of quantity V and domain magnetization Md whose moment is oriented at attitude θ to carried out induction B is given by means of τ=mHsinθ where m=MdV is the magnetic second of the particle.

This is the torque on a modern-wearing loop in a uniform magnetic field. This equation can be proven to be valid for a loop of any form. The loop includes a modern I, has N turns, every of area A and the perpendicular to the loop makes an angle θ with the field B.

Calculation:-

τ = μ×B

 = I A B sin90°

 = 4.38 × 3.14×(0.77)²×  1.157

 = 9.435 N m.

Learn more about magnetic torque here:-https://brainly.com/question/6585693

#SPJ4

Answer: In geometry, an ellipse is a two-dimensional shape, that is defined along its axes. An ellipse is formed when a cone is intersected by a plane at an angle with respect to its base.

Explanation:

Answer:

Assume that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex]. Also assume that that the air resistance on this stone is negligible.

The total air time of this stone is approximately [tex]1.5\; {\rm s}[/tex].

The maximum height of this stone is [tex]1.1\; {\rm m}[/tex], same as the height of the slingshot.

The range of this stone is approximately [tex]23\; {\rm m}[/tex].

The final velocity of this stone is approximately [tex]21\; {\rm m \cdot s^{-1}}[/tex].

Explanation:

If the air resistance on this stone is negligible, this stone will accelerate towards the ground with a vertical acceleration [tex]a_{y}[/tex] of [tex]a_{y} = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex].

At the same time, the horizontal velocity [tex]v_{x}[/tex] of this stone will stay the same during the entire flight: [tex]v_{x} = 15.2\; {\rm m\cdot s^{-1}}[/tex].

The stone was launched from a height of [tex]1.1\; {\rm m}[/tex] above the ground. Therefore, the vertical displacement [tex]x_{y}[/tex] of the stone will be [tex]x_{y} = (-1.1)\; {\rm m}[/tex] when the stone hits the ground.

The initial vertical velocity [tex]u_{y}[/tex] of this stone would be [tex]u_{y} = 0\; {\rm m\cdot s^{-1}}[/tex] since the stone was launched horizontally.

Let [tex]v_{y}[/tex] denote the final vertical velocity of this stone right before landing. Apply the SUVAT equation [tex](v_{y})^{2} - (u_{y})^{2} = 2\, a\, x[/tex] to find [tex]v_{y}\![/tex]:

[tex](v_{y})^{2} - (u_{y})^{2} = 2\, a\, x[/tex].

[tex](v_{y})^{2} = (u_{y})^{2} + 2\, a\, x[/tex].

[tex]\begin{aligned}v_{y} &= -\sqrt{(u_{y})^{2} + 2\, a\, x} \\ &= -\sqrt{0^{2} + 2\, (-9.81) \, (-1.1)}\; {\rm m\cdot s^{-1}} \\ &\approx -14.6908 \end{aligned}[/tex].

(Final vertical velocity [tex]v_{y}[/tex] is negative since the stone is travelling downwards toward the ground.)

Let [tex]t[/tex] denote the duration of this flight. Apply the SUVAT equation [tex]t = (v_{y} - u_{y}) / (a)[/tex] to find [tex]t\![/tex]:

[tex]\begin{aligned} t &= \frac{v_{y} - u_{y}}{a} \\ &\approx \frac{(-14.6908) - 0}{(-9.81)}\; {\rm s} \\ &\approx 1.49753\; {\rm s} \end{aligned}[/tex].

In other words, this stone was in the air for approximately [tex]1.5\; {\rm s}[/tex].

Also because the stone was launched horizontally, the vertical velocity of this stone started at [tex]u_{y} = 0\; {\rm m\cdot s^{-1}}[/tex] and became negative (toward the ground) immediately after.

Hence, this stone would not have travelled upward during the entire flight. The height of this stone would be maximized immediately after the stone was launched: [tex]1.1\; {\rm m}[/tex].

Multiple the horizontal velocity [tex]v_{x} = 15.2\; {\rm m\cdot s^{-1}}[/tex] of this stone by the duration of the flight [tex]t \approx 1.49753\; {\rm s}[/tex] to find the range (horizontal displacement) of this stone:

[tex]\begin{aligned} (\text{range}) &= v_{x}\, t \\ &\approx (15.2\; {\rm m\cdot s^{-1}})\, (1.49753\; {\rm s}) \\ &\approx 23\; {\rm m} \end{aligned}[/tex].

Right before landing, the stone would be travelling with a vertical velocity of [tex]v_{y} \approx (-14.6908)\; {\rm m\cdot s^{-1}}[/tex] and a horizontal velocity of [tex]v_{x} = 15.2\; {\rm m\cdot s^{-1}}[/tex]. Apply the Pythagorean Theorem to find the overall velocity of this stone at that moment:

[tex]\begin{aligned} v &= \sqrt{{(v_{x})}^{2}\, {(v_{y})^{2}} \\ &\approx \sqrt{(15.2\; {\rm m\cdot s^{-1})^{2} + (-14.6908)^{2}}\; {\rm m\cdot s^{-1}} \\ &\approx 21\; {\rm m\cdot s^{-1}} \end{aligned}[/tex].

a. The magnitude of the force exerted on the electron F = 3.64*10^-18N

b. The force F is 4.08*10^11 times the weight of the electron

a. In order to calculate the magnitude of the force exerted on the electron you first calculate the acceleration of the electron, by using the following formula:

v: final speed of the electron = 7.00*10^5 m/s

vo: initial speed of the electron = 3.00*10^5 m/s

a: acceleration of the electron = ?

x: distance traveled by the electron with certain speed= 5.0cm = 0.05m

you solve the equation (2) for a and replace the values of the parameters:

[tex]a=v^{2} - V^{2} /2x[/tex]

a=4×10^12 m/s²

to calculate the force we now use the second Newton law :

F=ma

m: mass of the electron = 9.11*10^-31kg

F=3.64*10^-18N

The magnitude of the force exerted on the electron is 3.64*10^-18N

b. given weight of  electron is :

Fg=mg

Fg = 8.92*10^-30N

The Division between the force electron and the weight of the electron F is:

F/Fg=4.08*10^11

The force F is 4.08*10^11 times the weight of the electron

Learn more about force here:

https://brainly.com/question/13191643

#SPJ4

option c A gun is fired horizontally from a tower with a muzzle velocity of 100 m/s. The bullet will arrive 100m away and arrive 1 second late if air resistance is ignored.

That is not to argue that there isn't a velocity increase. It absolutely depends on the specific firearm, cartridge, and loading in question. The reason for an increase in velocity is that the pressures are slightly higher, which causes the bullet to move less before engaging the rifling.

However, a significant improvement in accuracy is what many handloads will discover. A smaller distance to the rifling reduces the possibility of any bullet tipping and the variation in breech pressures that exists between different rounds. From round to round, slightly variable pressures can and will be produced even with equal powder loads, down to less than 1/10th of a grain. It's a simple reality.

Learn more about velocity here:

https://brainly.com/question/28738284

#SPJ4

A system of diatomic ideal gas contracts from a volume of 4.1 m3 to a final volume of 1.3 m3. if the process proceeds at constant pressure of 148 kpa. The energy transferred by heat, where positive is energy transferred into the system, and negative is energy transferred out of the system is(Q)=  1450.4 KJ

Energy is a physical term that means if a force is applied on a object and the object move some distance that means there is some energy is generate in that object. It is a vector quantity. It can be measured in Joule.

To calculate the energy we using the formula,

Q = nCp AT

Or, Q = nCp(T₂-T₁)

Or, Q = nCp[P(V₂ - V₁) /nR] ....eq(1)

Here we are given,

V₁ =Initial volume = 4.1 m³

V₂= final volume = 1.3 m³

Process is isobaric so,

p= Constant pressure= 148 kP = 148 x 10³ P

n = Number of moles = 1

Cp= specific heat at constant pressure.

For diatomic molecule Cp = 7R/2

we know, AT = T₂-T₁

From ideal gas equation

PV = nRT

T = PV/ nR

T₁= PV₁/nR

And T₂ = PV₂/nR

Now to calculate energy = Q in KJ transferred by heat at constant pressure.

Substitute all these values in eq (1)

Q = n(7R/2) [P(V₂ - V₁) /nR]

Or, Q = 7P(V₂ - V₁)/2

Or, Q = 3.5(148 × 10³ P) (4.1- 1.3) m³

Or, Q = 1450.4 x 10³ J ........(P.m3 = J)

Or, Q = 1450.4 KJ

From the calculation we can say that, The energy transferred by heat, where positive is energy transferred into the system, and negative is energy transferred out of the system is(Q)=  1450.4 KJ

Learn more about energy:

https://brainly.com/question/13881533

#SPJ4

true. condensation is when gas converts to liquid. the molecules move slower because of a loss of thermal energy, so it forms liquid

Any bridge is subject to three different types of forces: the dead load, the live load, and the dynamic load. The weight of the bridge itself is discussed in the first of these words.

Any of the four fundamental forces in physics—gravitational, electromagnetic, strong, and weak—that control how objects or particles interact as well as how some particles decay—is referred to as a fundamental force, also known as a fundamental interaction.

Compression and tension are the two main forces that are ever-present on a bridge. A force that compresses or shortens the object it is acting on is known as a compressive force. A force known as tension or tensile force works to stretch or expand the object it is acting on.

To know more about Force visit:

https://brainly.com/question/13191643

#SPJ13

Answer:

1226.7

Explanation:

force=ma

261×4.7=1226.7N

All different kinds of electrical wires and cables are routinely tested by measuring insulation resistance. This test is frequently used as a customer acceptance test in production settings.

This test is frequently used as a customer acceptance test in production settings, with the customer frequently defining the minimum insulation resistance per unit length.

In contrast to a real HIPOT test, the results of the IR Test are meant to provide information on the quality of the bulk insulation material rather than being helpful in identifying specific insulation flaws.

Many wire and cable manufacturers use the insulation resistance test to track their insulation manufacturing processes and identify emerging issues before process variables stray outside of permitted limits, even when it is not needed by the end customer.

To know more about insulation click on the link:

https://brainly.com/question/14363642

#SPJ4