15) Find one positive and one negative coterminal angle to 87°

Answers

Answer 1
To find a positive coterminal angle to 87°, we can add or subtract multiples of 360°. Adding 360° to 87° gives us 447°, which is a positive coterminal angle.

To find a negative coterminal angle, we can subtract multiples of 360°. Subtracting 360° from 87° gives us -273°, which is a negative coterminal angle.

Related Questions

NO LINKS!! URGENT HELP PLEASE!!

26. What is the ratio of a/c?​

Answers

Answer:  tan(52)

Reason:

Tangent is the ratio of opposite over adjacent.

The side 'a' is opposite reference angle 52, while c is adjacent to this angle.

Using a calculator, tan(52) = 1.27994 approximately.

Answer:

Tan 52°

Step-by-step explanation:

Since the Tangent of angle is given by the ratio of opposite to the adjacent.

So, Here

Tan 52°= opposite/adjacent

Tan 52°=a/c

Therefore, the ratio of a/c is Tan 52°

which of the following will form the composite function G(F(x)) shown below G(F(x)) = 4√x

Answers

Please add further information so that we can help accordingly :)

b. Based on the values in the table, what effect does changing the
radius seem to have on the surface area of the sphere? In general,
how does multiplying the radius of a sphere by a factor of x affect the
surface area of the sphere?

Answers

Answer:

Based on the values in the table, it can be observed that changing the radius of the sphere has a direct effect on the surface area of the sphere. As the radius increases, the surface area also increases.

Step-by-step explanation:

In general, multiplying the radius of a sphere by a factor of x will result in the surface area of the sphere being multiplied by a factor of x^2. This is because the surface area of a sphere is given by the formula:

Surface Area = 4πr^2

When the radius is multiplied by a factor of x, the new radius becomes xr. Substituting this into the formula, we get:

New Surface Area = 4π(xr)^2

= 4πx^2r^2

= x^2(4πr^2)

Therefore, the surface area of the sphere is multiplied by a factor of x^2 when the radius is multiplied by a factor of x. This relationship shows that the surface area increases at a faster rate than the radius.


what is the equation of this line?

Answers

The calculated equation of the line is y = -2x + 3

How to calculate the equation of the line

From the question, we have the following parameters that can be used in our computation:

The graph

Where, we have

(1, 1) and (0, 3)

The equation of the line is calculated as

y = mx + c

Where

c = y when x = 0

So, we have

y = mx + 3

Using the points, we have

m + 3 = 1

So, we have

m = -2

This means that

y = -2x + 3

Hence, the equation of the line is y = -2x + 3

Read more about linear function at

https://brainly.com/question/15602982

#SPJ1

A given city is at 35°S and 200°W. How far is it from this city to A. the North Pole and B. the Equator C. the south pole

Answers

The distance from the given city to the South Pole is 125 degrees of latitude.

To determine the distance from the given city to various locations, we need to consider the latitude and longitude coordinates.

Distance to the North Pole:

The North Pole is located at 90°N latitude. Since the given city is at 35°S latitude, we need to calculate the difference in latitude between the city and the North Pole.

Distance to the North Pole = 90° - 35° = 55°

The distance from the given city to the North Pole is 55 degrees of latitude.

Distance to the Equator:

The Equator is located at 0° latitude. To determine the distance from the city to the Equator, we need to calculate the absolute value of the latitude of the city.

Distance to the Equator = |35°| = 35°

The distance from the given city to the Equator is 35 degrees of latitude.

Distance to the South Pole:

The South Pole is located at 90°S latitude. Since the given city is at 35°S latitude, we need to calculate the difference in latitude between the city and the South Pole.

Distance to the South Pole = 35° - (-90°) = 35° + 90° = 125°

The distance from the given city to the South Pole is 125 degrees of latitude.

for such more question on distance

https://brainly.com/question/12356021

#SPJ8

4x+y20
find the value of y when x =6

Answers

Answer:

y= -4

Step-by-step explanation:

To find the value of y when x = 6, we can substitute x = 6 into the equation and solve for y:

4(6) + y = 20

24 + y = 20

y = 20 - 24

y = -4

Therefore, when x = 6, y is equal to -4.

A total of 27 students are in your class. There are nine more males than females.

How many females are in your class?

Answers

9 females. 18 males.

what comes next in the sequence
7,10,19,34

Answers

Based on the pattern we identified, the next term in the sequence would be 55.

The sequence should be 7, 10, 19, 34, 55

To identify the pattern and determine what comes next in the given sequence (7, 10, 19, 34), we need to examine the relationship between the terms and look for a consistent pattern.

If we calculate the differences between consecutive terms, we get:

10 - 7 = 3

19 - 10 = 9

34 - 19 = 15

By examining the differences, we notice that they are increasing by 6 each time.

This suggests that the sequence might be formed by adding an increasing number to each term.

Let's calculate the next difference:

15 + 6 = 21

Now, let's add this difference to the last term of the sequence:

34 + 21 = 55

Therefore, based on the pattern we identified, the next term in the sequence would be 55.

To summarize:

7, 10, 19, 34, 55

It's important to note that without further context or information, this pattern is just one of the possibilities and may not be the only correct answer.

Additional terms or a different pattern may emerge if more information is provided.

For similar question on sequence.

https://brainly.com/question/6561461

#SPJ8

Please answer ASAP I will brainlist

Answers

Answer:

f(0) = 1

f(1) = 21.1

Step-by-step explanation:

Do as the problem says:

[tex]f(0)=4^{2.2(0)}=4^0=1\\f(1)=4^{2.2(1)}=4^{2.2}\approx21.1[/tex]

I need help with 36 please I don’t understand

Answers

Answer:

36)

[tex]f(x) = \frac{1}{x + 3} - 1[/tex]

The equation of the function is y = 1/(x + 3) - 1

How to determine the equation of the transformation

From the question, we have the following parameters that can be used in our computation:

The reciprocal function shifted down one unit and left three units

The equation of the reciprocal function is represented as

y = 1/x

When shifted down one unit, we have

y = (1/x) - 1

When shifted left three units, we have

y = 1/(x + 3) - 1

Hence, the equation of the function is y = 1/(x + 3) - 1

Read more about transformation at

https://brainly.com/question/27224272

#SPJ1

Two roll of electric wire contain 80m 20cm and 86m 56cm of wire respectively. what is the total length of electric wire of both the roll? Express the Result in metres​

Answers

The total length of electric wire in both rolls is 166.76 meters.

To find the total length of electric wire in both rolls, we need to add the lengths of the two rolls together.

The first roll contains 80m 20cm of wire. We can convert this to meters by noting that 1 meter is equal to 100 centimeters. Therefore, the length of the first roll is:

80m 20cm = 80 meters + (20 centimeters / 100) meters

= 80 meters + 0.20 meters

= 80.20 meters

Similarly, the second roll contains 86m 56cm of wire. Converting this to meters:

86m 56cm = 86 meters + (56 centimeters / 100) meters

= 86 meters + 0.56 meters

= 86.56 meters

To find the total length, we add the lengths of both rolls:

Total length = 80.20 meters + 86.56 meters

= 166.76 meters

Therefore, the total length of electric wire in both rolls is 166.76 meters.

for such more question length

https://brainly.com/question/20339811

#SPJ8

Jessica and Barry squeezed oranges for juice. Jessica squeezed 23
5
cups of juice. Barry made 1
4
cup less than Jessica. Barry estimated that Jessica squeezed about 21
2
cups of juice.

Which is the best estimate for the amount of juice Barry made?

Answers

Jessica squeezed 235 cups of juice, Barry made 221 cups of juice, and the best estimate for the amount of juice Barry made is 198 cups.

Jessica and Barry squeezed oranges for juice. Jessica squeezed 235 cups of juice. Barry made 14 cups less than Jessica. Barry estimated that Jessica squeezed about 212 cups of juice. The best estimate for the amount of juice Barry made is 198 cups.

There are different ways to approach this problem, but one possible method is to use subtraction to find out how much juice Barry actually made, and then compare it to the estimated amount. If Jessica squeezed 235 cups of juice and Barry made 14 cups less, then Barry made 235 - 14 = 221 cups of juice.

This is the exact amount of juice that Barry made, but it may not be a convenient answer if we are looking for an estimate that is close to Barry's estimate of 212 cups of juice. One way to get such an estimate is to round 221 to the nearest ten or hundred. For example, if we round to the nearest ten, we get 220, which is only 8 cups away from Barry's estimate.

Alternatively, if we round to the nearest hundred, we get 200, which is only 12 cups away from Barry's estimate. Therefore, the best estimate for the amount of juice Barry made is 198 cups, which is obtained by rounding down to the nearest ten. This estimate is only 14 cups away from Barry's estimate, and it is also easy to compute mentally.

For more questions on juice

https://brainly.com/question/30436604

#SPJ8

PLSPLSS PLSSMSL HELP ME

Answers

Answer:

1. x = 18

2. x = 31

Step-by-step explanation:

1. Angles in a quadrilateral sum to 360°.

360 -(60 +130 +70) = 360 -260 = 100

So, x +82 = 100. x = 100 -82 = 18

2. Angles in a triangle sum to 180°. 180 -(29 +75) = 180 -104 = 76.

So, -17 +3x = 76. 3x = 93. x = 93/3 = 31

Naomi wants to save $100,000, so she makes quarterly payments of $1,500 into an account that earns 4.4%/a compounded quarterly. (If you are using TVM Solver, please ensure you provide screenshots of your work or breakdown how you entered everything into the solver).
How long will it take her to reach her goal?
Would doubling her payment amount save her half the time needed to save? Support your statement.

Answers

Naomi will take approximately 93 quarters (around 23 years and 3 months) to save $100,000 by making quarterly payments of $1,500 with a 4.4% interest rate.

Doubling her payment amount would save her time, but the exact time saved would require recalculating with the new payment amount.

To calculate the time it will take for Naomi to reach her goal of $100,000, we can use the future value formula for a series of periodic payments:

FV = P * [(1 + r)^n - 1] / r

Where:

FV = Future value (goal amount) = $100,000

P = Payment amount per period = $1,500

r = Interest rate per period = 4.4% per year / 4 (quarterly compounding) = 1.1% per quarter

n = Number of periods (quarters) to reach the goal (what we need to find)

Plugging in the values, we have:

$100,000 = $1,500 * [(1 + 0.011)^n - 1] / 0.011

Simplifying the equation, we have:

[(1 + 0.011)^n - 1] = $100,000 * 0.011 / $1,500

[(1.011)^n - 1] = 0.073333...

Now, we can solve this equation for n using logarithms:

n = log(0.073333...) / log(1.011)

Using a financial calculator or an online calculator, we find that n ≈ 92.33 quarters.

Since Naomi is making quarterly payments, we round up to the next whole number, giving us a total of 93 quarters.

Therefore, it will take Naomi approximately 93 quarters (or around 23 years and 3 months) to reach her goal of $100,000.

Doubling her payment amount to $3,000 per quarter would indeed save her time in reaching her goal. The higher payment amount means she would accumulate the desired amount faster. However, to determine the exact time saved, we would need to recalculate using the same formula as above with P = $3,000. The time saved will depend on the specific calculation result.

For more question on payments visit:

https://brainly.com/question/27926261

#SPJ8

Question 4(Multiple Choice Worth 5 points)
(01.02 MC)
A manufacturing firm employs workers to monitor and maintain specialized machines making small metal parts. Which economic questions does this statement
answer?
O How much to produce? How much to charge?
How to produce? How much to produce?
Owhat to produce? For whom to produce?
Owhat to produce? How to produce?

Answers

The correct answer is: O How to produce? How much to produce?

The statement "A manufacturing firm employs workers to monitor and maintain specialized machines making small metal parts" answers the economic questions of "How to produce?" and "How much to produce?"

How to produce: The statement indicates that the manufacturing firm has chosen to employ workers to monitor and maintain specialized machines. This suggests that they have made a decision regarding the production process and how they will go about manufacturing the small metal parts.

How much to produce: The fact that the manufacturing firm has employed workers to monitor and maintain the machines implies that they have determined a level of production that is deemed appropriate or necessary. The number of workers and the capacity of the machines can influence the quantity of small metal parts produced.

Therefore, the correct answer is: O How to produce? How much to produce?

for such more question on produce

https://brainly.com/question/4344214

#SPJ8

This example using cluster sampling, how do we know whether these estimates are considered valid?

Answers

The estimates are not correct because we are to find the proportion and sample error of the given values. The proportion expresses the number of opposing votes to the total number of voters. Also, the sampling error follows the formula of [tex]SE = Z\sqrt{P(1 - P/n)}[/tex]

                                                                     

The right estimate to use

The exact formula used in the expression is quite different from the standard formula for calculating the standard error. We are supposed to find the root of the standard deviation but that is not the case as can be seen in the formula above.

So, the main issue with this formula is that the square root is not considered in the proportion formula used by the council, so it is not a valid estimate.

Learn more about sample errors here:

https://brainly.com/question/28008941

#SPJ1

A particular type of vaccine comes in a Brand-1 and a Brand-2. Sixty-five percent
of all patients at a certain vaccination centre want the Brand-2.
i) Among ten randomly selected patients who want this type of vaccine, what
is the probability that at least six want the Brand-2?
ii) Among ten randomly selected patients, what is the probability that the
number who want the Brand-2 vaccine is within 1 standard deviation of
the mean value?
iii) The store currently has seven vaccines of each brand. What is the probability that all of the next ten patients who want this vaccine can get the brand
of vaccine they want from current stock?

Answers

i) Probability of at least six patients wanting Brand-2: P(X ≥ 6)

ii) Probability of number of patients within 1 standard deviation of mean: P(μ - σ ≤ X ≤ μ + σ)

iii) Probability that all ten patients get their desired brand from current stock: (7/14) * (6/13) * ... * (1/5)

i) The probability of at least six patients wanting Brand-2 out of ten randomly selected patients can be calculated using the binomial distribution. We need to sum the probabilities of six, seven, eight, nine, and ten patients wanting Brand-2.

The probability can be calculated as P(X ≥ 6) = P(X = 6) + P(X = 7) + P(X = 8) + P(X = 9) + P(X = 10), where X follows a binomial distribution with n = 10 and p = 0.65. The answer is the sum of these individual probabilities.

ii) To calculate the probability of the number of patients who want the Brand-2 vaccine being within 1 standard deviation of the mean value, we need to find the range of values that fall within one standard deviation of the mean.

We can use the normal approximation to the binomial distribution since n = 10 is reasonably large. We calculate the mean (μ) and standard deviation (σ) using μ = n * p and σ = √(n * p * (1 - p)), where p = 0.65. Then we calculate the probability of the number of patients falling within the range μ - σ to μ + σ.

iii) Since there are seven vaccines of each brand in stock, the probability that all ten patients who want the vaccine can get the brand they want from the current stock is equal to the probability of the first patient getting their desired brand (7/14) multiplied by the probability of the second patient getting their desired brand (6/13), and so on until the tenth patient (1/5). The final probability is the product of these individual probabilities.

For more question on Probability visit:

https://brainly.com/question/25839839

#SPJ8

Rearrange the equation so u is the independent variable

-12u+13=8w-3

w=_______

Answers

the answer is

w = -3/2 u + 2

What is the solution to the equation below In X=3.1

Answers

Answer:

the solution would be X=3 as 3.1 represents 3×1.

Which of the following functions is graphed below?

Answers

Answer: C

Step-by-step explanation:

the x - 2 means go right 2

the +3 means go up 3

Determine the surface area and volume

Answers

Answer:

Volume : 300

Surface Area : 280

Step-by-step explanation:

Volume : 6*5*10

Surface Area : 50+50+30+30+60+60

what is 34.6285 rounded to the nearest hundreds

Answers

Answer:

34.63

Step-by-step explanation:

The 2 in 34.6285 marks the hundredths place

We can round by seeing what number is to the right of it which is 8.

Since 8 is larger than 5, we round up by 1.

Thus, 34.63 is our answer

The answer is:

34.63

Work/explanation:

Rounding to the nearest hundredth means rounding to 2 decimal places (DP).

So we have 2 decimal places, and the 3rd one matters too because it will determine the value of the 2nd DP.

The third DP is 8. Since it's greater than 5, then the value of the 2nd DP will be rounded up. I will add 1 to it.

Remember that we round up when the digit that we're rounding to is followed by another digit that is greater than or equal to 5.

So we round :

[tex]\bf{34.6285 =\!=\!\!\! > 34.63}[/tex]

Therefore, 34.6286 rounded to the nearest hundredth is 34.63.

Mrs Johnson's latest test had an odd number of total marks. I got 84%. How many marks did I get?

Answers

Answer:168

Step-by-step explanation:Let's denote the total number of marks as "M."

Marks obtained = (84/100) * M

For example, if the total marks were 200, then:

Marks obtained = (84/100) * 200 = 168

Answer:

21

Step-by-step explanation:

If you got 84% then divide it by 100%. 100%/84%=21/25 check.

[tex] \frac{21}{25 } \times \frac{100}{1} = 84[/tex]

Find the measurement of each angle in a triangle. You need to provide me 3 different measurement of angles. please help !!

Answers

Answer:

x=30 degrees, 2x=60 degrees, 3x=90 degrees

Step-by-step explanation:

in a triangle the sum of angles is 180 so

x+2x+3x=180

6x=180

x=180/6

x=30

so the angle x is 30 degrees, the angle that is 2x is 60 degrees and the angle the angle 3x is 90

You pick a card at random.

2 3 4 5


What is P(divisor of 32)?

Answers

To find the probability of selecting a divisor of 32 from the given numbers (2, 3, 4, 5), we need to determine how many of those numbers are divisors of 32.

The divisors of 32 are 1, 2, 4, 8, 16, and 32.

Out of the given numbers, only 2 and 4 are divisors of 32.

So, the probability of selecting a divisor of 32 is 2 out of 4, or 2/4, which simplifies to 1/2.

which f(x) function is this?

Answers

Answer:

[tex]f(x) = - 3 {x}^{2} - 6x - 1[/tex]

Lola has 37 in Saint in her pocket. Then she finds these coins in the couch

Answers

Answer:

?

Step-by-step explanation:

?

There are 10 balls with different sizes. You take 4 random balls out of the 10 balls each time and then put them back. What is the probability that you will take the smallest ball at least once during 4 tries?

Answers

The probability of taking the smallest ball at least once during 4 tries can be calculated as 1 minus the probability of not taking the smallest ball in any of the 4 tries. Since each try is independent and the probability of not taking the smallest ball in a single try is 9/10, the probability of not taking it in all 4 tries is (9/10) * (9/10) * (9/10) * (9/10) = 0.6561. Therefore, the probability of taking the smallest ball at least once during 4 tries is 1 - 0.6561 = 0.3439, or approximately 34.39%.

To find the probability of not taking the smallest ball in any of the 4 tries, we need to calculate the probability of not selecting the smallest ball in each try and then multiply them together.

In each try, there are 9 balls remaining that are not the smallest ball, out of a total of 10 balls. Therefore, the probability of not taking the smallest ball in a single try is 9/10.

Since the tries are independent events, we can multiply the probabilities together to find the probability of not taking the smallest ball in all 4 tries.

After calculating this probability, we subtract it from 1 to obtain the probability of taking the smallest ball at least once during the 4 tries.

In this case, the probability of not taking the smallest ball in all 4 tries is (9/10) * (9/10) * (9/10) * (9/10) = 0.6561.

Finally, subtracting this value from 1 gives us the probability of taking the smallest ball at least once, which is 1 - 0.6561 = 0.3439, or approximately 34.39%.

for such more questions on  probability

https://brainly.com/question/251701

#SPJ8

Please answer ASAP I will brainlist

Answers

Answer:

X intercepts: (-2, 0), (2, 0)

Y intercept: (0, 4)

Edited because I forgot to put in point form earlier. Depends on whether your teacher wants it in point form. If not, ignore the 0s.

Step-by-step explanation:

X intercepts are the points where a line crosses the x axis. Y intercepts are the points where a line crosses the y axis.

Answer:

A. x-intercept: (-2,0), (2,0)

A. y-intercept: (0,4)

Step-by-step explanation:

If you want to find the x and y-intercept of a line, you need to know its equation. But don't worry, it's not as hard as it sounds. Here are some tips to help you out.

One type of equation is y = mx + c, where m is the slope and c is the y-intercept. This means that the line crosses the y-axis at c. To find the x-intercept, just plug in y = 0 and solve for x. You'll get x = -c/m. Easy peasy!

For example, if the equation is y = 2x + 4, then the y-intercept is 4 and the x-intercept is -2.

Another type of equation is ax + by + c = 0, where a, b and c are constants. To find the x-intercept, plug in y = 0 and solve for x. You'll get x = -c/a. To find the y-intercept, plug in x = 0 and solve for y. You'll get y = -c/b. Piece of cake!

For example, if the equation is 3x + 2y - 6 = 0, then the x-intercept is 2 and the y-intercept is -3.

Now you know how to find the x and y-intercept of a line from its equation.Let us understand the calculations to find the x and y intercept, through the steps in the below table.

What is the distance between the points (1,3)
and (–2,7)?

Answers

Answer:   5

=================================================

Explanation

I'll use the distance formula.

[tex](x_1,y_1) = (1,3) \text{ and } (x_2, y_2) = (-2,7)\\\\d = \sqrt{(x_1 - x_2)^2 + (y_1 - y_2)^2}\\\\d = \sqrt{(1-(-2))^2 + (3-7)^2}\\\\d = \sqrt{(1+2)^2 + (3-7)^2}\\\\d = \sqrt{(3)^2 + (-4)^2}\\\\d = \sqrt{9 + 16}\\\\d = \sqrt{25}\\\\d = 5\\\\[/tex]

The distance is 5 units.

Answer:

5

Step-by-step explanation:

Other Questions
Explain how the location of the load on a smith chart varies if we move away from the load toward the generator. a house increases in value by 8% every year. what is the percent growth of the value of the house in ten years? what factor does the value of the house grow by every ten years? theoretical principles and practical problems of respect des fonds in archival science A 12.0 kg ladder leans against a frictionless wall. The ladder is 8.00 m long; it makes an angle of 52.0 with the floor. The coefficient of static friction between the floor and the ladder is 0.45. A 65.0 kg person is climbing the ladder. How far along the ladder can the person can climb before the ladder begins to slip? (a) Draw a diagram of the ladder depicting the forces acting on it. Clearly label each force. {Hint use descriptors such as mg, 0, etc.. not numerals} (b) Find how far along the ladder the person can climb before the ladder begins to slip. What does Broome mean by the statement: "Those who benefit from it should not impose its costs on others who do not"?How according to Broome does this relate to our ethical obligations to future generations?Do you believe in light of climate change that ALL financial decisions are also ethical ones? Why or why not? 3) What is the difference between a training data set and a scoring data set? 4) What is the purpose of the Apply Model operator in RapidMiner? In what US city can you visit a state capital see the Atlantic Ocean, drive an hour to the Pacific Ocean and sea 17th century architecture? Determine the maximum allowable overall gross weight of the WB-67 design vehicle. (Submit a file with a maximum size of 1 MB.) Choose File No file chosen This answer has not been graded yet. Need Help Assignment 3.1. Answer the following questions about OSI model. a. Which layer chooses and determines the availability of communicating partners, along with the resources necessary to make the connection; coordinates partnering applications; and forms a consensus on procedures for controlling data integrity and error recovery? b. Which layer is responsible for converting data packets from the Data Link layer into electrical signals? c. At which layer is routing implemented, enabling connections and path selection between two end systems? d. Which layer defines how data is formatted, presented, encoded, and converted for use on the network? e. Which layer is responsible for creating, managing, and terminating sessions between applications? f. Which layer ensures the trustworthy transmission of data across a physical link and is primarily concerned with physical addressing, line discipline, network topology, error notification, ordered delivery of frames, and flow ol? g. Which layer is used for reliable communication between end nodes over the network and provides mechanisms for establishing, maintaining, and terminating virtual circuits; transport-fault detection and recovery; and controlling the flow of information? h. Which layer provides logical addressing that routers will use for path determination? i. Which layer specifies voltage, wire speed, and pinout cables and moves bits between devices? j. Which layer combines bits into bytes and bytes into frames, uses MAC addressing, and provides error detection? k. Which layer is responsible for keeping the data from different applications separate on the network? l. Which layer is represented by frames? m. Which layer is represented by segments? n. Which layer is represented by packets? o. Which layer is represented by bits? p. Put the following in order of encapsulation: i. Packets ii. Frames iii. Bits iv. Segments q. Which layer segments and reassembles data into a data stream? First citizen bank is about to negotiate with the union on behalf of its contracted CSR staff. The CSR's are asking for a 10% increase in salary, but the non-contracted CSR's have been given 5% increase. The union has threatened strike action if the negotiations are not settled. Many of the CSR's have been with the bank for over 5 years and are quite attached to being part of the bank staff.You are part of the First Citizen Bank Human Resource;Prepare for the negotiation by creating 4 points with each of the 3 categories of the assignment. explain how each point will be used as part of your negotiation approach.Prepare 3 feasible BATNAs and choose the one which is the strongestWhat is your target point?What is your reservation point?Seek to create a positive ZOPA so that negotiations can take place.List the key strategies your team will use to gain a win win negotiated outcome. Quantitative and Qualitative risk assessment method. Compare andcontrast these two methods. Which do you prefer and why? Categorize the studies as either Revealed Preference or Stated Preference. (Hint: each study belongs to one category) Find number of years then the effective rate (10 pts):(a) If P25,000 is invested at 8% interest compounded quarterly, how many years will it take for this amount to accumulate to #45,000?(b) Determine the effective rate for each of the following:1. 12% compounded semi-annually2. 12% compounded quarterly3. 12% compounded monthly Below is annual stock return data on Hollenbeck Corp and Luzzi Edit, Inc. What is the average return and standard deviation for each stock? (Round answers to 2 decimal places, e.g. 52.75.) eTextbook and Media Attempts: 0 of 2 used (b) What is the expected portfolio return on a portfolio comprised of i. 25\% Hollenbeck Corp and 75\% Luzzi Edit? ii. 50\% Hollenbeck Corp and 50\% Luzzi Edit? iii. 75\% Hollenbeck Corp and 25\% Luzzi Edit? (Round answers to 3 decimal places, e.g. 5.275.) 5. In looking at China, and Japan where do you see further helpcoming from? Will the help go to Ukraine or Russia? Why? Or willthey refrain from helping? Why? After standardising yourNaOH, you repeat the titrations now with your salad dressing, the final step! The end point of the titration will look like the middle solution in the image below. If you add too muchNaOHthe solution will turn purple/blue (right image). Concordant results are attained when three successive titration volumes that agree to better than0.1mLhave been achieved. Calculations The average titre ofNaOHfor your experiment was11.71mL. Your standardisation of theNaOHconcentration gave a [NaOH] of0.0147M. The first step in the calculations is to calculate the number of mol ofNaOHthat was delivered into the vinegar solutions using the formulan=cvNote: Don't enter units into your answer - numbers only. Enter three significant figures. You may use scientific notation only in the form, eg.5.68E2.Answer: What is the number of moles of acetic acid in the1.00mLof your dressing sample that you titrated theNaOHinto? Note: Don't enter units into your answer - numbers only. Enter three significant figures. You may use scientific notation only in the form, eg.5.68E2.Answer: Final calculation: Calculate the concentration (M) of acetic acid in your dressing. Note: Don't enter units into your answer - numbers only. Take care with significant figures. Answer: Article 24Publications and the press have freedom ofexpression except when it is detrimental to thefundamental principles of Islam or the rights of thepublic. The details of this exception will be specifiedby law||What can we learn about the priorities of the new Iranian government based on this section(s) of their constitution? The Fourier Transform (FT) of x(t) is represented by X(W). What is the FT of 3x(33+2) ? a. X(w)e^jw2b. None of the options c. X(w)e^jw2d. X(w/3)e^jw2e. 3X(w/3)e^jw2 3 Ficks First Law EXAMPLE PROBLEM 6.1 Diffusion Flux Computation A plate of iron is exposed to a carburizing (carbon-rich) atmosphere on one side and a decarbur- izing (carbon-deficient) atmosphere on Explain the difference between LDRS and LDR instructions O There is not difference. OLDRS is a used for byte instruction and A LDR for Word instructions. The result of the LDRS affects the Process Status Register, the result of the LDR has no the effect Process Status Register OLDR is used for byte instruction and LDRS for Word instructions.