1. What do you mean by energy conservation?​

The final weight will be reduced by 0.1 of its original weight.

Equation modelling is the process of writing a mathematical verbal expression in the form of a mathematical expression for correct analysis, observations and results of the given problem.

A mathematical expression is made up of terms(constants and variables) separated by mathematical operators.

A mathematical equation is used to equate two expressions.

Given that, fictional shrinking man shrinks proportionately to 1/10 th of his original height.

Let, weight be W.

W = mg

m = ρ V

Then W = ρ V g

Assume the body to be cylinder of radius r and height h, we can write,

W = π r²ρ g h

So, the initial weight is W = π r²ρ g h

After shrinking W becomes W'.

W' = π r²ρ g h/10

Then, W'/W = (π r²ρ g h/10)/π r²ρ g h = 0.1

Thus, the final weight will be reduced by 0.1 of its original weight.

To know more about weights:

https://brainly.com/question/9122811

#SPJ4

Divide the number of times the event happens over the period of time to determine the frequency.

The frequency index is the number of occupational accidents for 1,000 employees, whereas the frequency rate is the number of occupational accidents (work halted for more than one day) that occurred over a period of 12 months by one million hours worked.

Both frequency and rate count the number of times a behavior takes place. Since frequency, f, is 1/T, wave speed, frequency, and wavelength are related by the equation v = f. In contrast to frequency, rate is time-based. Calculating rate and frequency is simpler and more precise.

To learn more about frequency from given link

https://brainly.com/question/14614149

#SPJ4

Based on Newton's law of gravity, the force of attraction on the airplane moving on Earth is directly proportional to the mass of the airplane and inversely proportional to the square of distance the airplane from Earth's surface.

Newton's law of universal gravitation states that the force of attraction between two objects in the universe is directly proportional to the product of their masses and inversely proportional to the square of the distance between the two objects.

Mathematically, this law is written as follows;

Fg = ( G m₁ m₂ )  / ( r² )

where;

From Newton's second law of law of motion we will have;

F = mg

mg = ( G m₁ m₂ )  / ( r² )

g = Gm / r²

Every object on  Earth surface moves with equal acceleration due to gravity which has a value of 9.8 m/s².

Thus, airplane flying on Earth surface will be affected by gravity and the weight or downward force on the airplane is a function of gravity.

Learn more about Newton's law of gravity here: https://brainly.com/question/13908515

#SPJ1

The force on the particle is equal to  5 ×10⁻⁴ N. The kinetic energy of the particle is 2.5 ×10⁻³ J.

An electric field can be described as the field that surrounds electrically charged particles and acts as a force on all other charged particles in the field.

The Coulomb force on a charge q at any point is equal to the product of the charge and the electric field at that point

[tex]{\displaystyle \mathbf {F} =q\mathbf {E} }[/tex]

The SI unit of the electric field is a volt per meter (V/m).

Given, the magnitude of charge, q = 10⁻⁵ C

The electric field, E = 50 V/m

The force on the particle, F = 50 × 10⁻⁵ = 5 ×10⁻⁴ N.

Work, W = K.E. = F.S = 5 ×10⁻⁴ × 5 = 25 × 10⁻⁴ = 2.5 ×10⁻³ J

Learn more about electric field, here:

https://brainly.com/question/

#SPJ1

If the amount demand of a product changes more than proportionally as its price rises or falls, then it is said to be elastic.

The more replacements there are for an item, more elastic the good is, according to definition of an elastic good, which is where change in price results in a large movement in demand. Price elasticity of demand is determined by dividing percentage change in quantity required by the percentage change in price.

Products like cars, appliances, and luxury items that are rarely purchased are examples of elastic commodities. In the event that the cost of these products is momentarily high, consumers may decide to put off buying.

To know more about elastic goods, refer

https://brainly.com/question/29549068

#SPJ4

Answer:

Approximately [tex]2.22\; {\rm rad\cdot s^{-1}}[/tex].

Explanation:

Each revolution increases the angular displacement of the propeller by [tex]2\,\pi[/tex] radians. Therefore, after [tex]10.6[/tex] revolutions, the angular displacement of the propeller will be [tex](10.6)\, (2\, \pi) = 21.2\,\pi[/tex] radians.

Divide angular displacement by the duration to find the angular velocity of this propeller:

[tex]\begin{aligned}\frac{21.2\, \pi\; {\rm rad}}{30\; {\rm s}} \approx 2.22\; {\rm rad\cdot s^{-1}} \end{aligned}[/tex].

When landing on a wet runway that is covered in rubber from previous landings.

The majority of auto safety experts concur that hydroplaning would be most likely to happen at speeds greater than 35 mph.As soon when the first droplets land on your windshield, drastically reduce your speed.

Vehicle weight: A vehicle has a greater tendency to hydroplane the lighter it is.Asphalt without grooves is more likely to hydroplane than concrete with ribs or grooves.

To know more about hydroplaning visit:

https://brainly.com/question/29157933

#SPJ4

The detection of a gas giant exoplanet orbiting its host star on an eccentric orbit with a semimajor axis of 100 au (astronomical units) could provide evidence for a number of things, depending on the specifics of the system.

Here are a few possibilities:

The presence of a distant, unseen companion: If the gas giant's orbit is highly eccentric (meaning it is more oval-shaped than circular), this could indicate the presence of a companion object, such as another planet or a brown dwarf, that is gravitationally interacting with the gas giant and influencing its orbit.

The influence of other planets: If the gas giant is not the only planet in the system and there are other planets with more modest orbits, their combined gravitational influence could be shaping the gas giant's orbit.

The presence of a primordial disk: A gas giant orbiting at such a great distance from its host star could have formed in a primordial disk of gas and dust that surrounded the star in its early stages of development.

The presence of a "rogue" planet: It is also possible that the gas giant is a "rogue" planet, meaning it is not orbiting a star at all, but rather is floating freely through the galaxy. However, this is less likely given the presence of an eccentric orbit, which suggests the presence of a gravitational influence.

Learn more about Planets here:

https://brainly.com/question/1286910

#SPJ4

Answer:

four cycles per second

The pellet has a kinetic energy of 4.9 10-2 J as it exits the spring.

Kinetic energy is the term for the energy present in an object in motion. Examples of kinetic energy include you walking down the street, the globe rotating around the sun, and motion in space. The relationship between kinetic energy and an object's mass and square of its velocity is direct: K.E. = 1/2 m v2.

To calculate the kinetic energy of the pellet, solve the energy conservation equation using the necessary variables as substitutes.

KE = EPE

KE = 1/2 kx²

KE = 1/2(20N/m) (7cm ×1/100cm)²

KE = 4.9 × 10⁻²J.

To know more about kinetic energy visit:-

https://brainly.com/question/26472013

#SPJ4

the nuclear formula for the 236 94 pu alpha decay.

236(top) 94(bottom) Pu ---> 4(top) 2(bottom) He + 232(top) 92(bottom) U

Nuclear processes such as "alpha decay," which releases a particle made up of two protons and two neutrons, allow unstable nuclei to transform into new elements. An alpha particle, which is just a helium nucleus, is an expelled particle that has this name. A positive charge and a sizable mass are two characteristics of alpha particles. Alpha particles can't penetrate very deeply into a material or go very far through the air due to their huge mass. Alpha decay is rarely employed in external medical radiation therapy since it only affects surfaces.

By examining how radiation is deflected by a magnetic field, Ernest Rutherford was able to distinguish alpha decay from other types of radiation in the beginning. You would anticipate a positive particle to deflect in the manner of alpha decay.

Learn more about alpha decay here:

https://brainly.com/question/27870937

#SPJ4

The half life of the sample is obtained as 21 seconds. Option E.

We know that the half life is the time that is taken for only half of the radioactive materials that was initially present to remain. We know that the material would have to be radioactive thus it would disintegrate as time passes.

Looking at the graph we can see that the half life can be traced from the graph that has been shown in the image that has been attached to this answer. The half life of the system is 21 seconds.

Learn more about half life:https://brainly.com/question/24710827

#SPJ1

Sound Navigation and Ranging is referred to as SONAR. It is a method used to find things, navigate, or communicate below the surface of the water. It makes advantage of the Echo concept.

Why is sonar a valuable tool?

Sound waves are used by sonar to "see" in the water.

Sonar is mainly used by NOAA scientists to create nautical charts, find underwater navigational hazards, find and map things on the bottom like shipwrecks, and map the actual seafloor. Nearby objects that block the sound waves' passage cause them to reflect back off of them. The distance to the item is determined using the timing of the sound wave's transmission and reception, the speed of sound in water, the angle of the echo, and the change in frequency.

To know more about sonar, visit:

brainly.com/question/20510435

#SPJ4

If the half-life of a radioactive sample is 22 years, it will take 73.11 years for the sample to decay to 10%.

A fixed percentage of activity is lost during radioactive decay per unit of time. Half-life: The amount of time needed for a sample to degrade to 50% of its starting state. 1/2 = e –(λ*T1/2). constant over time and unique to each nuclide.

The term (physical) half-life refers to the amount of time needed for radioactivity to decline and split in half. Half of the radioactivity will remain after a period of time equal to the half-life has passed, and a further half of the radioactivity will remain after a period of time twice as long as the half-life has passed.

To know more about radioactive sample visit:-

https://brainly.com/question/9674119

#SPJ4

Answer:

The mass of the satellite is: m=475kg

The height of the satellite from the surface of mercury is: h=265km

The mass of mercury is: M=3.30×1023kg

The radius is: r=2.24×106m

Let m and s stand in for mass and speed, respectively. so that,

Its speed must therefore be around 6.58 miles per hour.

m = k

where k is the proportionality constant.

Speed equals 4 miles per hour for a specific river.

m = k

m = 1024k ............ 1

transporting particles with a mass 12 times greater than usual;

12m = k

m = ............. 2

Thus,

= 1024 k

= 12 x 1024

= 12288

12288

s = 6.5750

6.58 miles per hour is s.

Its speed must therefore be around 6.58 miles per hour.

To learn more about mass please click on below link

https://brainly.com/question/19694949

#SPJ4

The capacitance of the capacitor is 47.22×10^-12F

Capacitance is the ratio of the charge Q and the potential difference between the two plates. Also the capacitance can be expressed as:

C = εA/d, In this equation, C is capacitance; ε is permittivity, a term for how well dielectric material stores an electric field; A is the parallel plate area; and d is the distance between the two conductive plates. It is measured in Farad

A = 0.56×0.20 = 0.112cm²

d = 21mm = 0.021m

ε = 8.854×10^-12F/m

C = εA/d

C =( 8.854× 10^-12× 0.112)/0.021

C = 47.22 × 10^-12 F

learn more about capacitance from

https://brainly.com/question/27393410

#SPJ1

Answer:

Radioactive decay accounts for about half of the Earth's internal heat. Due to their enrichment compared with other radioactive isotopes, four radioactive isotopes mainly contribute to radiogenic heat: uranium-238 (238U), uranium-235 (235U), thorium-232 (232Th), and potassium-40 (40K).

Answer:

Phase shift {F(x)} = Asin(Bx-C) + D.

Air bags protect people during car crashes is an example that shows how physics affects society. The correct option to this question is D.

For more information on physics kindly visit to

https://brainly.com/question/28600368

#SPJ1

Complete question: Which of the following most directly shows how physics affects society

A.a perfume company designs a new fragrance

B.a patient is treated by acupuncture for an illness

C.gardeners uses fertilizers to help plants grow

D.air bags protect people during car crashes

In a case whereby a dentist takes x-rays, they must be careful to correctly interpret the results. in one study, it was found that dental students and new dentists were much more likely than experienced the illusion that makes the 'fracture line' look darker and more serious to the less experienced dentists than it really is Mach bands.

Mach bands  can be described as the illusory dark as well as the bright bars seen at the foot and knee of a luminance trapezoid this wa explained by Ernst Mach in the latter part of the 19th century however the  Mach bands  can be regarded as the test bed not only for models of brightness illusions but of spatial vision in general.

Therefore, in the bcase above the illusion that makes the 'fracture line' look darker  as wwell as serious to the less experienced dentists than it really is Mach bands.

Learn more about x-rays at:

https://brainly.com/question/24505239

#SPJ1

The buoyant force experienced by an object fully submerged in a fluid is given by the formula:

where Fb is the buoyant force, p is the density of the fluid, g is the acceleration due to gravity, and V is the volume of the object.

If you are given the volume and density of the ball and the density of the water, you can use this formula to calculate the buoyant force experienced by the ball. Simply plug in the appropriate values for p (the density of the water), g (the acceleration due to gravity, which is approximately 9.81 m/s^2 on Earth), and V (the volume of the ball).

It's important to note that this formula only applies to objects that are fully submerged in the fluid. If the object is partially submerged, the buoyant force will be less than what is calculated using this formula. In this case, you would need to take into account the volume of the object that is submerged in the fluid in order to calculate the buoyant force accurately.

Learn more about Boyuant Force here:

https://brainly.com/question/11884584

#SPJ4

0.000709 m , 0.00122 m is the radii of the first and second bright fringes in the reflected light.

In works of art, light that reflects off one thing and strikes a different object is known as reflected light. You are working with light no matter what topics you draw or paint or how you draw or paint them. How three-dimensional your drawing appears depends on how well you depict light.

R = Radius of curvature = 2.9 m

λ =  Wavelength = 559 nm = 546×10⁻⁹ m

Radius of bright fringe

r = [tex]\sqrt{(m+0.5)}[/tex]λr

The first bright fringe indicates that m = 0.

r = [tex]\sqrt{(0.5*559)*10^-9*1.8}[/tex] = 0.000709m

At m = 1, first-second fringe implies.

r = [tex]\sqrt{(1+0.5)559*10^-9*1.8}[/tex] = 0.00122m

∴The initial brilliant fringe has a radius of 0.000709 m. The second brilliant fringe has a radius of 0.00122 m.

To know more about reflected light visit:-

https://brainly.com/question/29698263

#SPJ4

The solution is Orbit or Bust. Because it has the shortest build time and the lowest cost. To make a jet, aerospace engineers require a lightweight material.

Identifying a problem, researching the problem, generating various solutions, selecting the best answer, creating a model, testing the model, refining and retesting the model as needed, and communicating the final solution are all steps in the technological design process. Identifying a need, creating and implementing a solution, and assessing the solution are the four stages of technology design. It starts with a product design challenge and ends with SRS, and the starting point is the project purpose statement, thus all options are false.

Learn more about technology here-

https://brainly.com/question/22533265

#SPJ4

The velocity of the ball changes from ν₁ to ν₂ then the impulse received by the ball is m(ν₂ - ν₁).

Impulse received by the object can be described as the integral of a force over the time for which it acts. Impulse can be defined as also a vector quantity since the force is a vector parameter.

Impulse can be exerted on an object that produces an equivalent vector change in the linear momentum.

The S.I. unit of impulse can be denoted as N⋅s Newton second and the dimensionally unit of momentum is kg⋅m/s. A resultant force provides acceleration to the object and changes the velocity of an object for as long as it acts.

The change in the linear momentum of an object is equal to the impulse.

I = ΔP = m(ν₂ - ν₁).

Learn more about Impulse, here:

brainly.com/question/16980676

#SPJ1

The questions is incomplete I answered it in general way

The resulting moment of force is 45 nm.

Calculation:

F = 450 N

x = 1 m

Moment of force = F ×x

Moment of force = 450 ×0.10nm

Moment of force = 45.0nm

An object experiences pushes or pulls as a result of its interaction with another object. There is a force operating on each object whenever there is an interaction between two items. There is no force acting on the two objects when the interaction ends.

There are four basic factors at work. Strong nuclear force, electromagnetic force, and gravitational force. The enormous nuclear force is the most potent of these four forces. This leads us to the conclusion that an object moves more quickly whenever the force acting on it is in the same direction as its motion.

To know more about force

https://brainly.com/question/8779261

#SPJ4

In the field of renewable energy, wind and solar energy are major actors. They are free energy sources, limitless, and most of all, they reduce carbon emissions from fossil fuels.

Wind energy is part of solar energy. The earth's atmosphere is heated by the sun, and wind is produced as a result of the earth's rotation around the sun. During the day, the air above the land warms up more quickly than the air above the sea.

Technically, wind energy is a type of solar energy. Hot air rises when the uneven surface of the Earth is heated by the sun's radiation, while cold air settles. The result of this difference in air pressure is wind, which is a kinetic (based on motion) source of energy. A windmill take hold of that kinetic energy.

To know more about source of energy visit:-

https://brainly.com/question/10483137

#SPJ4

Primary groups: high degrees of dedication, togetherness, and intimacy. Typically huge, impersonal, and frequently including secondary groups

A secondary group is one based on shared goals or interests in which the members are infrequently, if ever, in face-to-face contact with each other, such as a club. A primary group is a small group based primarily on long-term face-to-face interaction and typically based on affiliation, such as a family or a friendship group. Primary groups, in Cooley's opinion, are the most important in our life. The main group is typically quite small and consists of people who interact face-to-face in emotional ways over an extended period of time. This group fulfils expressive rather than pragmatic requirements—emotional demands. A main group consists

To learn more about secondary please click on below link

https://brainly.com/question/336747

#SPJ4

Hertz are used to measure frequency (Hz).This refers to the number of pressure waves per second that would pass a fixed place in the case of sound.

To learn more about Hertz refer

https://brainly.com/question/254161

#SPJ4