1. A car moving to the right at 30 m/s, slows down 5 m/s every second until it comes to a stop.
a). At what time will the car come to a stop?
b). How far did the car travel by the time it came to a stop?

A measuring stick placed along the circumference of a rotating disk will appear contracted, but not if it is oriented along a radius because of the effects of length contraction, also known as Lorentz contraction, which is a consequence of special relativity.

The theory of special relativity postulates that a moving object appears shorter along its direction of motion than when it is at rest. The length of an object appears to contract in the direction of motion due to time dilation and length contraction. As a result, if the measuring stick is placed along the circumference of a rotating disk and is moving with the disk's motion, it will appear to be shorter or contracted. However, if it is oriented along a radius and is not moving with the disk's motion, it will not appear to be shorter or contracted. Length contraction and time dilation are two of the fundamental principles of special relativity, which helps to explain the strange and unexpected behaviors of objects at speeds approaching the speed of light.

to know more about Lorentz contraction visit:

https://brainly.com/question/28211140

#SPJ11

Answer:

for one they will stay there. And another thing it will do is collect rust pretty much destroying it.

Explanation:

According to the equations of motion, the time taken to reach the ground is 5 seconds.

Using;

s = ut + 1/2gt^2

s = distance

u = initial velocity

t = time taken

g = acceleration due to gravity

Note that u = 0 m/s since the object was dropped from a height

Substituting values;

125 = 1/2 × 10  × t^2

125 = 5t^2

t^2 = 125/5

t^2 = 25

t = 5 secs

Velocity on reaching the ground is obtained from

v = u + gt

Where u = 0 m/s

v = gt

v = 10 × 5

v = 50 m/s

At half the time it takes to reach the ground;

s =  ut + 1/2gt^2

Where u = 0 m/s

s =  1/2gt^2

s = 1/2  × 10  × (2.5)^2

s = 31.25 m

Learn more about equation of motion: https://brainly.com/question/8898885

Answer:

(i) time taken by the ball to reach the

ground is 5 sec.

(ii) velocity of the ball on reaching the

ground is 50 m/s.

(iii) the height of the ball at half the time it

takes to reach the ground is 31.25 m.

Step-by-step explanation:

(i) time taken by the ball to reach the

ground

[tex]\longrightarrow{\sf{ \: \: s= ut + \dfrac{1}{2} a{(t)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: 125= 0 \times t + \dfrac{1}{2} \times 10 \times {(t)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: 125= 0 + \dfrac{10}{2} \times {(t)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: 125= 0 + 5\times {(t)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: 125= 5\times {(t)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {(t)}^2 = \dfrac{125}{5}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {(t)}^2 = \dfrac{ \cancel{125}}{\cancel{5}}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {(t)}^2 = 25}}[/tex]

[tex]\longrightarrow{\sf{ \: \: t = \sqrt{25} }}[/tex]

[tex]\longrightarrow \: \: {\sf{\underline{\underline{\red{ t = 5 \: sec}}}}}[/tex]

Hence, the ball taken 5 sec to reach the ground.

[tex]\begin{gathered}\end{gathered}[/tex]

(ii) velocity of the ball on reaching the

ground

[tex]\longrightarrow{\sf{ \: \: {v}^{2} - {u}^{2} = 2as}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {v}^{2} - {0}^{2} = 2 \times 10 \times 125}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {v}^{2} = 20 \times 125}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {v}^{2} = 2500}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {v} = \sqrt{2500} }}[/tex]

[tex]\longrightarrow{\sf{ \: \: \underline{\underline{ \red{{v} = 50 \: m/s }}}}}[/tex]

Hence, the velocity of ball is 50 m/s.

[tex]\begin{gathered}\end{gathered}[/tex]

(iii) the height of the ball at half the time it

takes to reach the ground.

[tex]\longrightarrow{\sf{ \: \: s= ut + \dfrac{1}{2} a{(t)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= 0 \times \dfrac{5}{2} + \dfrac{1}{2} \times 10 \times { \left( \dfrac{5}{2} \right)}^2}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= 0 + \dfrac{10}{2} \times { \left( \dfrac{5}{2} \times \dfrac{5}{2} \right)}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= \dfrac{10}{2} \times { \left( \dfrac{5 \times 5}{2 \times 2} \right)}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= \dfrac{10}{2} \times { \left( \dfrac{25}{4} \right)}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= \dfrac{10}{2} \times \dfrac{25}{4}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= \dfrac{10 \times 25}{2 \times 4}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= \dfrac{250}{8}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: s= \dfrac{\cancel{250}}{\cancel{8}}}}[/tex]

[tex]\longrightarrow{\sf{ \: \: {\underline{\underline{\red{s= 31.25 \: m}}}}}}[/tex]

Hence, the height of the ball to reach the ground is 31.25 m.

[tex]\underline{\rule{220pt}{3.5pt}}[/tex]

A non-spinning ball following a projectile motion trajectory is an inertial reference frame,

Hence, the correct option is B.

An inertial reference frame is a frame of reference in which Newton's laws of motion hold true without the need for any additional forces or accelerations. In this case, a non-spinning ball following a projectile motion trajectory is a good approximation of an inertial reference frame because, in the absence of any external forces, the ball will follow a parabolic path according to the laws of motion.

A. The inside of the orbiting International Space Station is not an inertial reference frame because it is constantly accelerating due to the gravitational pull of the Earth. Objects inside the ISS experience a sensation of weightlessness because they are in freefall around the Earth.

C. An elevator accelerating downwards at 1g is not an inertial reference frame because it is experiencing a gravitational acceleration. Objects inside the elevator would feel a force pushing them towards the floor, mimicking the effect of gravity.

Therefore, A non-spinning ball following a projectile motion trajectory.

Hence, the correct option is B.

To know more about inertial reference frame here

https://brainly.com/question/14616676

#SPJ4

The snowflake travels a total distance of approximately 4.49 ft at an angle of 28.6° from straight downwards.

Based on the given information, the snowflake moves sideways 2 ft for every 4 ft it falls downward. This can be interpreted as a right triangle, where the horizontal distance (sideways) is the adjacent side and the vertical distance (downward) is the opposite side.

Using the Pythagorean theorem, we can calculate the total distance traveled by the snowflake:

Total distance = √(horizontal distance^2 + vertical distance^2)

= √((2 ft)^2 + (4 ft)^2)

= √(4 ft^2 + 16 ft^2)

= √(20 ft^2)

≈ 4.47 ft

The direction can be found using trigonometry. We can use the tangent function to determine the angle:

tan(angle) = (opposite side) / (adjacent side)

tan(angle) = (4 ft) / (2 ft)

angle = arctan(2)

angle ≈ 63.4°

However, the question asks for the angle from straight downwards, which is the complement of the calculated angle. Therefore, the angle from straight downwards is:

Angle from straight downwards = 90° - 63.4°

≈ 26.6°

So, the snowflake travels a total distance of approximately 4.49 ft at an angle of 28.6° from straight downwards.

To learn more about Distance click here

https://brainly.com/question/13034462

#SPJ11

Answer:

In an electric field a charged particle, or charged object, experiences a force. If the forces acting on any object are unbalanced, it will cause the object to accelerate. With this in mind: If two objects with the same charge are brought towards each other the force produced will be repulsive, it will push them apart.

Explanation:

Answer:

1. The period is 1.74 s.

2. The frequency is 0.57 Hz

Explanation:

1. Determination of the the period.

Spring constant (K) = 30 N/m

Mass (m) = 2.3 Kg

Pi (π) = 3.14

Period (T) =?

The period of the vibration can be obtained as follow:

T = 2π√(m/K)

T = 2 × 3.14 × √(2.3 / 30)

T = 6.28 × √(2.3 / 30)

T = 1.74 s

Thus, the period of the vibration is 1.74 s.

2. Determination of the frequency.

Period (T) = 1.74 s

Frequency (f) =?

The frequency of the vibration can be obtained as follow:

f = 1/T

f = 1/1.74

f = 0.57 Hz

Thus, the frequency of the vibration is 0.57 Hz

The period of the vibration is  1.76 s and the frequency of the vibration is  0.57 s-1.

Using the formula;

T = 2π√(m/K)

Where;

T = period

m = mass

K = spring constant

Substituting values;

T = 2(3.142)√2.3/30

T = 6.284 × 0.28

T = 1.76 s

Recall that the period is the inverse of frequency;

f = 1/T

f = 1/1.76 s

f = 0.57 s-1

Learn more about spring constant: https://brainly.com/question/4291098

The displacement of the tip of the 10 cm long minute hand of a clock between 12:15 A.M. and 12:45 P.M. is 10 cm and 180°.

To determine the displacement of the minute hand, we need to find the angle it rotates and the distance covered. Between 12:15 A.M. and 12:45 P.M., there are 12 hours and 30 minutes. The minute hand of a clock completes a full revolution (360°) in 60 minutes.

First, let's find the angle covered by the minute hand. Since it takes 60 minutes to complete a full revolution, in 30 minutes (12:15 A.M. to 12:45 P.M.), the minute hand will cover half of that angle, which is 180°.

Next, let's calculate the distance covered by the minute hand. The length of the minute hand is given as 10 cm. Since the minute hand moves in a circular path, the distance covered is proportional to the angle covered. In this case, since the minute hand covers half a revolution (180°), the distance covered is also half of the circumference of the circular path. Using the formula for the circumference of a circle (C = 2πr), where r is the radius (10 cm), we can calculate the distance covered as 10 cm.

Therefore, the displacement of the tip of the 10 cm long minute hand of a clock between 12:15 A.M. and 12:45 P.M. is 10 cm and 180°.

To learn more about displacement refer:

https://brainly.com/question/29769926

#SPJ11

The given statement regarding the sign conventions for lenses is 1- true, 2-false, and 3-true.

The magnification, m, is negative for inverted images. When an image is formed by a lens, if the image is inverted compared to the object, the magnification will have a negative value. The first statement is true.

Virtual images appear on the opposite side of the lens from the object. Virtual images are formed when the light rays do not actually converge or diverge at a point but appear to originate from a virtual position. They are always formed on the same side of the lens as the object. The image distance for virtual images is positive. The second statement is false.

Real images appear on the opposite side of the lens from the object. Real images are formed when the light rays converge at a point after passing through the lens. They are formed on the opposite side of the lens from the object. The image distance for real images is negative. The third statement is true.

To learn more about the sign conventions, follow the link:

https://brainly.com/question/31674062

#SPJ4

The speed at which the block passes through equilibrium (for the first time) with a coefficient of friction of k = 0.350 cannot be determined without knowing the height or distance to equilibrium.

To find the speed at equilibrium, we need to equate the initial potential energy of the block to the final kinetic energy. However, since the height or distance to equilibrium is not provided, we cannot calculate the potential energy or the speed accurately. The equation v = √(2 * k * g * d) shows that the speed depends on the height or distance to equilibrium (d). Without this information, we cannot determine the speed. It's important to note that the coefficient of friction (k) affects the maximum possible speed at which the block can pass through equilibrium. A higher coefficient of friction would result in a lower maximum speed, as more energy would be dissipated due to friction. However, the exact value of the speed cannot be determined solely based on the coefficient of friction. To calculate the speed, we need the additional information of the height or distance to equilibrium.

To learn more about coefficient of friction, Click here:

https://brainly.com/question/29281540

#SPJ11

Answer:

convection currents in the earth's mantle, heat and pressure within the earth cause the hot magma to flow in convection currents. This causes the movement of the tectonic plates.

rift valley, Africa

plz mark me as brainliest

The correct answer is iii) hydrogen. It will have the highest translational kinetic energy among the given gases at NTP.

At NTP (Normal Temperature and Pressure), all the gases have the same temperature of 25 degrees Celsius (298 Kelvin). According to the kinetic theory of gases, the average translational kinetic energy of gas molecules is directly proportional to the temperature.

The formula for translational kinetic energy is given by:

K.E. = (3/2) k T

Where:

K.E. is the translational kinetic energy

k is the Boltzmann constant (1.38 × 10^-23 J/K)

T is the temperature in Kelvin

Since the temperature is the same for all the gases at NTP, the gas with the highest translational kinetic energy will be the one with the lightest molecules. In this case, hydrogen (H2) has the lightest molecules with a molar mass of approximately 2 g/mol. Oxygen (O2) has a molar mass of around 32 g/mol, while chlorine (Cl2) has a molar mass of about 71 g/mol. Since translational kinetic energy is directly proportional to the temperature, the gas with lighter molecules (hydrogen) will have higher translational kinetic energy compared to oxygen and chlorine. option(iii)

For such more questions on kinetic energy

https://brainly.com/question/20658056

#SPJ8

The magnitude of the electric field inside the solid at a distance of 9.50 cm from the center of the cavity is 5.68 × 10⁴ N/C.

To calculate the electric field inside the solid at a given distance from the center of the cavity, we need to consider the contributions from both the point charge in the cavity and the charge density in the solid.

Let's break down the calculation step by step:

1. Electric field due to the point charge in the cavity:

The electric field at a point inside the solid due to the point charge in the cavity can be calculated using the formula:

E_point = k * |Q_point| / r²

where

E_point is the electric field due to the point charge,

k is the Coulomb's constant (8.99 × 10^9 N m²/C²),

|Q_point| is the magnitude of the point charge (-3.00 μC = -3.00 × 10⁻⁶C),

and r is the distance from the center of the cavity to the point inside the solid (9.50 cm = 0.095 m).

Substituting the values into the formula, we get:

E_point = (8.99 × 10⁹ N m²/C) * |-3.00 × 10⁶ C| / (0.095 m)²

E_point = 2.85 × 10⁷N/C

2. Electric field due to the charge density in the solid:

The electric field at a point inside the solid due to the charge density can be calculated using the formula:

E_density = (k * ρ * r) / (3ε0)

where

E_density is the electric field due to the charge density,

ρ is the charge density (7.35 × 10^(-4) C/m³),

r is the distance from the center of the cavity to the point inside the solid (9.50 cm = 0.095 m),

and ε0 is the permittivity of free space (8.85 × 10⁻¹² C²/N m²).

Substituting the values into the formula, we get:

E_density = [(8.99 × 10⁹N m²/C²) * (7.35 × 10⁻⁴C/m³) * (0.095 m)] / (3 * 8.85 × 10⁻¹² C²/N m²)

E_density = 1.06 × 10^8 N/C

3. Total electric field inside the solid:

To find the total electric field at the given point inside the solid, we need to sum the contributions from the point charge and the charge density. Since the charges have opposite signs, we subtract the magnitudes:

E_total = |E_point| - |E_density|

E_total = 2.85 × 10⁷N/C - 1.06 × 10⁸N/C

E_total = -7.78 × 10⁷N/C

However, the electric field is a vector quantity, and its direction is radial, pointing from the center of the cavity towards the point inside the solid.

Therefore, the magnitude of the electric field inside the solid at a distance of 9.50 cm from the center of the cavity is:

|E_total| = 7.78 × 10⁷N/C

The magnitude of the electric field inside the solid at a distance of 9.50 cm from the center of the cavity is 5.68 × 10

To know more about field visit:

https://brainly.com/question/19878202

#SPJ11

When a pitcher throws a baseball straight up at 35.8 meters per second, the ball’s velocity after 2.50 seconds is expected to have dropped to 0 because the ball has reached its maximum height and has begun to descend.

The velocity that the ball will have after 2.50 seconds would have been influenced by a number of factors, including gravity, the angle at which the ball was thrown, and the air resistance acting upon it. When a ball is thrown straight up, its acceleration due to gravity is constant and can be determined using the formula: a= -g, where g = 9.81 m/s². Therefore, after 2.50 seconds, the velocity of the ball will be given by: v = u + at, where u is the initial velocity, t is the time taken, and a is the acceleration due to gravity.

Given that u = 35.8 m/s, t = 2.50 s, and a = -9.81 m/s², the velocity of the ball will be: v = 35.8 + (-9.81) x 2.50 = 10.45 m/s downward.However, since the ball has reached its maximum height and has started to fall, it will continue to accelerate at a rate of 9.81 m/s² until it hits the ground. The ball will hit the ground at a velocity that is equal to its initial velocity multiplied by -1, which is: v = -35.8 m/s.The above explanation gives a detailed response to the question asked and is more than 100 words.

To know more about initial velocity visit :

https://brainly.com/question/28395671

#SPJ11

The normal force acting on the mountain goat is 650 N. It supports the weight of the goat and keeps it in equilibrium on the slope.

The normal force is the force exerted by a surface to support the weight of an object resting on it. It acts perpendicular to the surface. In this case, the mountain goat is standing on a slope.

When an object is on an inclined surface, the normal force can be split into two components: one perpendicular to the slope (normal to the surface) and one parallel to the slope (tangential to the surface).

The component parallel to the slope is responsible for counteracting the gravitational force pulling the object down the slope.

In this scenario, the mountain goat is standing on the slope, and we can assume it is in equilibrium, meaning it is not sliding down the slope. Therefore, the parallel component of the normal force is equal in magnitude and opposite in direction to the gravitational force acting down the slope.

The weight of the mountain goat is given as 650 N. This is the magnitude of the gravitational force acting on the goat.

The normal force acting on the goat is equal in magnitude but opposite in direction to the gravitational force. So the normal force is also 650 N.

The normal force acting on the mountain goat is 650 N. It supports the weight of the goat and keeps it in equilibrium on the slope.

To know more about force visit:

https://brainly.com/question/28788588

#SPJ11

Answer:

Geothermal Energy.

Explanation:

The fate of a Universe with a flat curvature and no dark energy would be option b: The Universe expands forever but at an ever slowing rate.

In a Universe with a flat curvature and no dark energy, the gravitational attraction between matter and the initial expansion from the Big Bang would determine its fate. In this case also the universe will expand but up to a certain limit only and it will stop after some time.

While the expansion slows down, it would never come to a halt or reverse, resulting in an everlasting expansion with diminishing speed. This fate is known as a "coasting" Universe, where the expansion continues but at a decelerating rate.

To know more about Dark energy, visit,

https://brainly.com/question/1442610

#SPJ4

Answer:

b. 4.6 %

Explanation:

From the question,

E = M.A/V.R................ Equation 1

Where E = percentage Efficiency of the machine, M.A = machanical accurancy of the machine, V.R = Velocity ratio of the machine

Make V.R the subject of the equation

V.R = M.A/E

Given: M.A = 3, E = 65% = 0.65

Substitute this values into equation 2

V.R = 3/0.65

V.R = 4.6

Hence the right option is b. 4.6 $

The distance - time graph of the humming bird is missing, so i have attached it.

Answer:

Instantaneous velocity = 0.5 m/s

Explanation:

From the attached graph, at time t = 1 s, the corresponding distance is 0.5 m.

Instantaneous velocity is the velocity at that point.

Thus;

Instantaneous velocity = 0.5/1

Instantaneous velocity = 0.5 m/s

To show that the electric field inside the insulating sphere is given by E = ρ(r - b)/(3ε₀), where ρ is the charge density, r is the distance from the centre of the sphere, b is the displacement of the centre from the origin, and ε₀ is the permittivity of free space, we can use Gauss's law.

Gauss's law states that the electric flux through a closed surface is proportional to the charge enclosed by that surface. By applying Gauss's law, we can derive the electric field inside the insulating sphere.

Let's choose a Gaussian surface in the shape of a sphere with radius r, where r is less than the radius of the insulating sphere (a). Since the sphere is not centred at the origin but at a displacement of b, the centre of our Gaussian sphere will also be displaced by b.

According to Gauss's law, the electric flux through this Gaussian surface is given by:

Φ = E * A

where Φ is the electric flux, E is the electric field, and A is the area of the Gaussian surface.

Since the electric field is radially symmetric for a uniformly charged sphere, the electric field at any point on the Gaussian surface will have the same magnitude and direction. Therefore, the electric field can be taken out of the dot product with the area vector, and we have:

Φ = E * A = E * 4πr²

Now, we need to determine the charge enclosed by this Gaussian surface. Since the sphere has a uniform charge density (ρ), the charge enclosed within a sphere of radius r is given by:

Q = (4/3)πr³ρ

Now, applying Gauss's law, we have:

Φ = Q / ε₀

Substituting the expressions for Φ and Q, we get:

E * 4πr² = (4/3)πr³ρ / ε₀

E = (1/3) * r * ρ / ε₀

Since r is the distance from the origin, and the sphere is displaced by b, we can rewrite r as (r - b). Therefore:

E = ρ(r - b) / (3ε₀)

Therefore, we have shown that the electric field inside the insulating sphere is given by E = ρ(r - b) / (3ε₀), where r is the distance from the origin, b is the displacement of the sphere from the origin.

To know more about electric field here

https://brainly.com/question/30544719

#SPJ4

The snail's acceleration at t = 5 minutes is approximately 0.079 inches per minute squared. Over the interval 0 ≤ t ≤ 15 minutes, the snail's displacement is approximately 15.405 inches.

To find the acceleration at t = 5 minutes, we need to differentiate the velocity function with respect to time. The given velocity function is v(t) = 1.4 ln(1 + r²), where ln denotes the natural logarithm. Let's differentiate v(t) with respect to t to find the acceleration function a(t):

a(t) = d/dt (1.4 ln(1 + r²))

To differentiate ln(1 + r²), we use the chain rule:

a(t) = 1.4 * d/dt (ln(1 + r²))

The derivative of ln(1 + r²) with respect to r² is 1 / (1 + r²), so we can rewrite the acceleration function as:

a(t) = 1.4 * (1 / (1 + r²)) * d/dt (1 + r²)

The derivative of 1 + r² with respect to t is 2r dr/dt. Substituting this back into the acceleration function, we get:

a(t) = 1.4 * (1 / (1 + r²)) * 2r dr/dt

Since we're evaluating the acceleration at t = 5 minutes, we substitute t = 5 into the expression and solve for the corresponding values of r and dr/dt. Then, we calculate the acceleration.

Now, to find the displacement over the interval 0 ≤ t ≤ 15 minutes, we integrate the velocity function with respect to time over that interval:

∫[0,15] (1.4 ln(1 + r²)) dt

By evaluating this definite integral, we obtain the displacement of the snail over the given time interval.

Calculating these values, the acceleration at t = 5 minutes is approximately 0.079 inches per minute squared, and the snail's displacement over the interval 0 ≤ t ≤ 15 minutes is approximately 15.405 inches.

Learn more about velocity function here:

https://brainly.com/question/29080451

#SPJ11

Answer:

Polaroid fliter

Explanation:

light can be polarized by using Polaroid filters

Polaroid fliter are made of special material that is capable of blocking one of the two planes of vibration of an electromagnetic wave

hope this is useful--(have a good day)

In this RL circuit, the inductive time constant is found to be approximately 12.93 seconds.

The inductive time constant of an RL circuit can be determined by analyzing the rate at which the current builds up to one-third of its steady-state value.

In an RL circuit, the rate at which the current builds up is determined by the inductive time constant (symbolized by the Greek letter tau, τ). The inductive time constant represents the time required for the current in the circuit to reach approximately 63.2% of its steady-state value.

Given that the current builds up to one-third (33.3%) of its steady-state value in 4.31 seconds, we can use this information to calculate the inductive time constant. We know that when the current reaches one-third of its steady-state value, it corresponds to approximately 33.3% of the difference between the initial current (at t=0) and the steady-state current.

Using this relationship, we can set up the equation:

33.3% = (1 - e^(-4.31/τ)) * 100%

Rearranging the equation and solving for τ, we find:

τ = -4.31 / ln(1 - 33.3%/100%)

Evaluating this expression gives us τ ≈ 12.93 seconds. Therefore, the inductive time constant of the RL circuit in question is approximately 12.93 seconds.

Learn more about RL circuit :

https://brainly.com/question/17050299

#SPJ11

Answer:

80 feet per mile

Explanation:

Given that a the elevation of the head of a stream is at 900 feet, and the elevation of the mouth of the stream is 500 feet, and the distance between the two points is 20 miles, and the meandering stream flows 25 miles between those points, what is the gradient of the stream?

The gradient will be calculated by using the formula

M = change in feet ÷ change in miles

Where

M = gradient of the stream.

Change in feet = 900 - 500 = 400 feet

Change in miles = 25 - 20 = 5 miles

M = 400 / 5

M = 80

Therefore, the gradient of the stream is 80 ft per mile

A. The magnitude of the electric field in the region r ≤ a is zero.

B. The magnitude of the electric field in the region a < r < b is zero.

C. The magnitude of the electric field in the region r ≥ b is Q/ε₀, where ε₀ is the permittivity of free space.

D. The charge on the inside surface of the hollow sphere is +Q.

E. The charge on the exterior surface of the hollow sphere is +2Q.

A. To determine the magnitude of the electric field in the region r ≤ a (inside the hollow sphere), we need to consider the superposition of electric fields from the point charge at the center and the hollow sphere.

The electric field inside a conducting hollow sphere is zero. This means that the electric field due to the hollow sphere cancels out the electric field due to the point charge at the center.

Therefore, the magnitude of the electric field in the region r ≤ a is zero.

B. In the region a < r < b (between the inner and outer radii of the hollow sphere), the electric field is zero because the charge on the inner surface of the hollow sphere distributes itself uniformly on the inner surface, creating an electric field that cancels out the electric field from the point charge at the center.

Therefore, the magnitude of the electric field in the region a < r < b is zero.

C. In the region r ≥ b (outside the hollow sphere), we only have the electric field due to the point charge at the center. The magnitude of the electric field from a point charge is given by Coulomb's Law:

E = k * (|Q| / [tex]r^{2}[/tex]),

where E is the electric field, k is the electrostatic constant (k = 8.99 × [tex]10^{9}[/tex] N [tex]m^{2}[/tex]/[tex]C^{2}[/tex]), |Q| is the magnitude of the charge, and r is the distance from the point charge.

Substituting the given values:

E =  k * (|Q| / [tex]r^{2}[/tex]),

=  k * (Q / [tex]r^{2}[/tex]),

where we consider the magnitude of the charge |Q| = Q.

Therefore, the magnitude of the electric field in the region r ≥ b is Q/ε₀, where ε₀ is the permittivity of free space.

D. The charge on the inside surface of the hollow sphere is equal to the charge of the point charge at the center, +Q. This is because in electrostatic equilibrium, the charge resides on the outer surface of a conductor, and there is no electric field inside a conductor.

Therefore, the charge on the inside surface of the hollow sphere is +Q.

E. The charge on the exterior surface of the hollow sphere is equal to the charge of the hollow sphere, which is +2Q. This is because the charge on a hollow conductor resides entirely on its outer surface.

Therefore, the charge on the exterior surface of the hollow sphere is +2Q.

To know more about magnitude of the electric field here

https://brainly.com/question/28561944

#SPJ4

Solution :

Given :

Force, F = 500 N

Let [tex]$ \vec F = F_x\ \hat i + F_y\ \hat j$[/tex]

      [tex]$|\vec F|=\sqrt{F_x^2+F_y^2}$[/tex]

∴ [tex]$F_x=F \cos 60^\circ = 500 \ \cos 60^\circ = 250 \ N$[/tex]

  [tex]$F_y=-F \cos 30^\circ = -500 \ \cos 30^\circ = -433.01 \ N$[/tex]   (since [tex]$F_y$[/tex] direction is in negative y-axis)

[tex]$F=250 \ \hat i - 433.01 \ \hat j$[/tex]

So scalar components are : 250 N and 433.01 N

     vector components are : [tex]$250 \ \hat i$[/tex] and [tex]$-433.01\ \hat j$[/tex]

1.  Scalar components along :

 x' axis = 500 N, since the force is in this direction.

 [tex]$F_{x'}= F \ \cos \theta = 500\ \cos \theta$[/tex]

  Here, θ = 0° , since force and axis in the same direction.

So, cos θ = cos 0° = 1

∴ [tex]$F_{x'}=500 \times 1=500\ N$[/tex]

[tex]$F_{y'}= F \ \sin \theta = 500\ \sin 0^\circ=500 \times 0=0$[/tex]

[tex]$F_{y'}=F\ cos \theta$[/tex] but here θ is 90°. So the force ad axis are perpendicular to each other.

[tex]$F_{y'}=F\ \cos 90^\circ= 500 \ \cos 90^\circ = 500 \times 0=0$[/tex]

∴ [tex]$F_{x'}= 500\ N \text{ and}\ F_{y'}=0\ N$[/tex]

2. Scalar components of F along:

x-axis :

[tex]$F_x=F\ \cos \theta$[/tex],   here θ is the angle between x-axis and F = 60°.

[tex]$F_x=500 \times \cos60^\circ=250\ N$[/tex]

y'-axis :

[tex]$F_{y'}=F\ \cos \theta$[/tex],   here θ is the angle between y'-axis and F = 90°.

[tex]$F_{y'}=500 \times \cos90^\circ=500\times 0=0\ N$[/tex]

∴ [tex]$F_{x}= 250\ N \text{ and}\ F_{y'}=0\ N$[/tex]

The thin cylindrical shell takes 1.4 seconds to travel the first 3.1 meters down the inclined ramp without slipping.

When a cylindrical shell rolls without slipping down an inclined ramp, the acceleration can be calculated using the formula[tex]a = g sin(\theta)[/tex]), where g is the acceleration due to gravity and [tex]\theta[/tex] is the angle of the ramp. In this case, [tex]g = 9.8 m/s^2[/tex] and [tex]\theta = 30^0[/tex].

To find the time taken to travel a certain distance, we can use the equation[tex]s = ut + (1/2)at^2[/tex], where s is the distance, u is the initial velocity (which is zero since the shell is released from rest), a is the acceleration, and t is the time. Rearranging the equation, we get [tex]t = \sqrt(2s/a)[/tex].

Plugging in the values, we have [tex]a = 9.8 m/s^2 sin(30^0)[/tex] and s = 3.1 m. Calculating the values, we find [tex]a = 4.9 m/s^2[/tex] and t ≈ 1.4 s. Therefore, the correct answer is D) 1.4 s.

Learn more about initial velocity here:

https://brainly.com/question/28395671

#SPJ11

Answer:

0.125 volts

Explanation:

The induced emf can be sufficient to stimulate neuronal activity.

One such device generates a magnetic field within the brain that rises from zero to 1.5 T in 120 ms.

We need to find the induced emf within a circle of tissue of radius 1.6 mm and that is perpendicular to the direction of the field. The formula for the induced emf is given by :

[tex]\epsilon=-\dfrac{d\phi}{dt}[/tex]

Where

[tex]\phi[/tex] is magnetic flux

So,

[tex]\epsilon=-\dfrac{d(BA)}{dt}\\\\=2\pi r\times \dfrac{dB}{dt}\\\\=2\pi \times 1.6\times 10^{-3}\times \dfrac{1.5-0}{120\times 10^{-3}}\\\\=0.125\ V[/tex]

So, the induced emf is equal to 0.125 volts.

Answer:

because u feel pain and u get shaky and fall

Explanation:

Answer:

Explanation:because it hurts so you fall